Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Morphological and Chemical Analysis of Low-Density Polyethylene Crystallized on Carbon and Clay Nanofillers.

ABSTRACT: Interest in carbon and clay-based nanofillers has grown in recent years. The crystallization behavior of low-density polyethylene (LDPE) was studied using a variety of notable nanofillers used in engineering applications and prepared using a solution crystallization method. Carbon nanotubes (CNTs), graphene oxide nano-platelets, clay (montmorillonite), and modified clay (surface-modified with trimethyl stearyl ammonium) were used to induce heterogeneous crystallization of LDPE. The crystallized LDPE samples, imaged using scanning and transmission electron microscopy, revealed different microstructures for each nanohybrid system, indicating these various nanofillers induce LDPE lamellae ordering. The underlying interactions between polymer and nanofiller were investigated using FTIR spectroscopy. X-ray diffraction (XRD) was used to determine crystallinity. This work examines how the differences in morphology and chemical structure of the nanofillers induce changes in the nucleation and growth of polymer crystals. These results will provide guidance on functional design of nano-devices with controlled properties.

SUBMITTER: Depan D

PROVIDER: S-EPMC8152291 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Migration of Quaternary Ammonium Cations from Exfoliated Clay/Low-Density Polyethylene Nanocomposites into Food Simulants.

Project description:Clay/polymer nanocomposites (CPNs) are polymers incorporating refined clay particles that are frequently functionalized with quaternary ammonium cations (QACs) as dispersion aids. There is interest in commercializing CPNs for food contact applications because they have improved strength and barrier properties, but there are few studies on the potential for QACs in CPNs to transfer to foods under conditions of intended use. In this study, we manufactured low-density poly(ethylene) (LDPE)-based CPNs and assessed whether QACs can migrate into several food simulants under accelerated storage conditions. QACs were found to migrate to a fatty food simulant (ethanol) at levels of ?1.1 ?g mg-1 CPN mass after 10 days at 40 °C, constituting about 4% total migration (proportion of the initial QAC content in the CPN that migrated to the simulant). QAC migration into ethanol was ?16× higher from LDPE containing approximately the same concentration of QACs but no clay, suggesting that most QACs in the CPN are tightly bound to clay particles and are immobile. Negligible QACs were found to migrate into aqueous, alcoholic, or acidic simulants from CPNs, and the amount of migrated QACs was also found to scale with the temperature and the initial clay concentration. The migration data were compared to a theoretical diffusion model, and it was found that the diffusion constant for QACs in the CPN was several orders of magnitude slower than predicted, which we attributed to the potential for QACs to migrate as dimers or other aggregates rather than as individual ions. Nevertheless, the use of the migration model resulted in a conservative estimate of the mass transfer of QAC from the CPN test specimens.

| S-EPMC6705235 | biostudies-literature

Polymer Nanocomposites-A Comparison between Carbon Nanotubes, Graphene, and Clay as Nanofillers.

Project description:Nanofilled polymeric matrices have demonstrated remarkable mechanical, electrical, and thermal properties. In this article we review the processing of carbon nanotube, graphene, and clay montmorillonite platelet as potential nanofillers to form nanocomposites. The various functionalization techniques of modifying the nanofillers to enable interaction with polymers are summarized. The importance of filler dispersion in the polymeric matrix is highlighted. Finally, the challenges and future outlook for nanofilled polymeric composites are presented.

| S-EPMC5502926 | biostudies-other

Thermal and Morphological Analysis of Linear Low-Density Polyethylene Composites Containing d-limonene/β-cyclodextrin for Active Food Packaging.

Project description:Composites made of linear low-density polyethylene (LLDPE) and β-cyclodextrin/d-limonene inclusion complex (CD-lim) were prepared by melt extrusion to develop a novel food packaging material. Scanning electron microscopy evidenced a fairly good dispersion of the filler within the polymeric matrix. Infrared spectroscopy coupled with thermogravimetric analysis confirmed the presence of CD-lim in the composites, proving that the applied technology of including the essential oil within β-CD cages allows for preventing a sizable loss of d-limonene despite a high temperature and shear applied upon extrusion processing. Moreover, the influence of the filler on the thermal properties of PE was assessed. It was found that the cyclodextrin-based inclusion complex significantly fastens the crystallization path of the polyethylene matrix with an improved crystallization rate of the PE/CD-lim composites compared to the neat polymer.

| S-EPMC9920889 | biostudies-literature

Electronic Structure of Polyethylene: Role of Chemical, Morphological and Interfacial Complexity.

Project description:The electronic structure of an insulator encodes essential signatures of its short-term electrical performance and long-term reliability. A critical long-standing challenge though is that key features of the electronic structure of an insulator (and its evolution) under realistic conditions have not been entirely accessible, either via experimental or computational approaches, due to the inherent complexities involved. In this comprehensive study, we reveal the role of chemical and morphological imperfections that inevitably exist within the technologically important prototypical and pervasive insulator, polyethylene (PE), and at electrode/PE interfaces. Large-scale density functional theory computations and long-time molecular dynamics simulations were employed to accurately recover, explain and unravel a wide variety of experimental data obtained during the electrical degradation of PE. This scheme has allowed us to directly and realistically address the role of chemical, morphological and interfacial complexity in determining electronic structure. These efforts take us a step closer to understanding and potentially controlling dielectric degradation and breakdown.

| S-EPMC5522474 | biostudies-literature

Surface Mechanical Characterization of Carbon Nanofiber Reinforced Low-Density Polyethylene by Nanoindentation and Comparison with Bulk Properties.

Project description:Surface mechanical properties of low-density polyethylene (LDPE) reinforced by carbon nanofibers (CNFs) up to 3% weight load were investigated using nanoindentation (NI). Surface preparation of the nanocomposite was thoroughly investigated and atomic force microscopy (AFM) was used to analyze the surface roughness of the polished surfaces. The dispersion of nanofillers in the LDPE matrix was examined using scanning electron microscopy (SEM). The effect of various penetration loads on the results and scattering of the data points was discussed. It was found by NI results that the addition of 3% weight CNF increased the elastic modulus of LDPE by 59% and its hardness up to 12%. The nano/micro-scale results were compared with macro-scale results obtained by the conventional tensile test as well as the theoretical results calculated by the Halpin-Tsai (HT) model. It was found that the modulus calculated by nanoindentation was twice that obtained by the conventional tensile test which was shown to be in excellent agreement with the HT model. Experimental results indicated that the addition of CNF to LDPE reduced its wear resistance property by reducing the hardness to modulus ratio. SEM micrographs of the semicrystalline microstructure of the CNF/LDPE nanocomposite along with the calculated NI imprints volume were examined to elaborate on how increasing the penetration depth resulted in a reduction of the coefficient of variation of the NI data/more statistically reliable data.

| S-EPMC6835558 | biostudies-literature

Carbon Nanotube Reinforced High Density Polyethylene Materials for Offshore Sheathing Applications.

Project description:Multiwall carbon nanotube (CNT)-filled high density polyethylene (HDPE) nanocomposites were prepared by extrusion and considered for their suitability in the offshore sheathing applications. Transmission electron microscopy was conducted to analyse dispersion after bulk extrusion. Monolithic and nanocomposite samples were subjected to accelerated weathering and photodegradation (carbonyl and vinyl indices) characterisations, which consisted of heat, moisture (seawater) and UV light, intended to imitate the offshore conditions. The effects of accelerated weathering on mechanical properties (tensile strength and elastic modulus) of the nanocomposites were analysed. CNT addition in HDPE produced environmentally resilient nanocomposites with improved mechanical properties. The energy utilised to extrude nanocomposites was also less than the energy used to extrude monolithic HDPE samples. The results support the mass substitution of CNT-filled HDPE nanocomposites in high-end offshore applications.

| S-EPMC7412307 | biostudies-literature

An approach to low-density polyethylene biodegradation by Bacillus amyloliquefaciens.

Project description:Low-density polyethylene (LDPE) is a major cause of persistent and long-term environmental pollution. In this paper, two bacterial isolates Bacillus amyloliquefaciens (BSM-1) and Bacillus amyloliquefaciens (BSM-2) were isolated from municipal solid soil and used for polymer degradation studies. The microbial degradation LDPE was analyzed by dry weight reduction of LDPE film, change in pH of culture media, CO2 estimation, scanning electron microscopy (SEM), and fourier transform infrared FTIR spectroscopy of the film surface. SEM analysis revealed that both the strains were exhibiting adherence and growth with LDPE which used as a sole carbon source while FTIR images showed various surface chemical changes after 60 days of incubation. Bacterial isolates showed the depolymerization of biodegraded products in the extracellular media indicating the biodegradation process. BSM-2 exhibited better degradation than BSM-1 which proves the potentiality of these strains to degrade LDPE films in a short span of time.

| S-EPMC4327746 | biostudies-literature

Direct Observation of Long-Chain Branches in a Low-Density Polyethylene.

Project description:Low-density polyethylene (LDPE) has short-chain branch (SCB) and long-chain branch (LCB). In particular, the influence of the structure of LCBs on polymer properties is remarkable; however, it has been difficult to precisely analyze LCB structures. In this study, we measured the chain length of LCBs and the distance between branch points of LDPE by atomic force microscopy. Consequently, three LCBs were confirmed in a main chain of 162 nm, and their length were measured as 10, 31, and 18 nm. The positions of the LCBs were 33, 70, and 78 nm from the main-chain end.

| S-EPMC6611765 | biostudies-literature

Mycodegradation of low-density polyethylene by Cladosporium sphaerospermum, isolated from platisphere.

Project description:Plastic accumulation is a severe threat to the environment due to its resistivity to thermal, mechanical and biological processes. In recent years, microbial degradation of plastic waste disposal is of interest because of its eco-friendly nature. In this study, a total of 33 fungi were isolated from the plastisphere and out of which 28 fungal species showed halo zone of clearance in agarized LDPE media. The fungus showing highest zone of clearance was further used to evaluate its degradation potential. Based on morphological and molecular technique, the fungus was identified as Cladosporium sphaerospermum. The biodegradation of LDPE by C. sphaerospermum was evaluated by various methods. The exposure of LDPE with C. sphaerospermum resulted in weight loss (15.23%) in seven days, higher reduction rate (0.0224/day) and lower half-life (30.93 days). FTIR analysis showed changes in functional group and increased carbonyl index in LDPE treated with C. sphaerospermum. SEMimages evidenced the formation of pits, surface aberrations and grooves on the LDPE film treated with the fungus whereas the untreated control LDPE film showed no change. AFM analysis confirmed the surface changes and roughness in fungus treated LDPE film. This might be due to the extracellular lignolytic enzymes secreted by C. sphaerospermum grown on LDPE. The degradation of polyethylene by Short chain alkanes such as dodecane, hexasiloxane and silane were identified in the extract of fungus incubated with LDPE film through GC-MS analysis which might be due to the degradation of LDPE film by C. sphaerospermum. This was the first report on the LDPE degradation by C. sphaerospermum in very short duration which enables green scavenging of plastic wastes.

| S-EPMC11004025 | biostudies-literature

Effect of Clay Nanofillers on the Mechanical and Water Vapor Permeability Properties of Xylan-Alginate Films.

Project description:In this study, xylan-alginate-based films were reinforced with nanoclays (bentonite or halloysite) by the solvent casting technique. The effect of the nanoclay loadings (1-5 wt %) on various properties-mechanical, optical, thermal, solubility, water sorption, and water vapor permeability (WVP)-of the xylan-alginate films were examined for their application as food packaging materials. A 5 wt % loading of either bentonite or halloysite resulted in a 49% decrease of the WVP due to the impermeable nature of the silicate layers that make up both bentonite and halloysite. Thermal stability and solubility of the nanocomposite films were not significantly influenced by the presence of the nanoclays, whereas the optical properties were significantly improved when compared to neat xylan-alginate blend. In general, films reinforced with bentonite exhibited superior mechanical and optical properties when compared to both halloysite-based nanocomposite and neat films.

| S-EPMC7601507 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data