Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Simultaneously achieving high capacity storage and multilevel anti-counterfeiting using electrochromic and electrofluorochromic dual-functional AIE polymers.

ABSTRACT: With the advent of the big data era, information storage and security are becoming increasingly important. However, high capacity information storage and multilevel anti-counterfeiting are typically difficult to achieve simultaneously. To address this challenge, herein, two electrochromic and electrofluorochromic dual-functional polymers with aggregation-induced emission (AIE) characteristics were rationally designed and facilely prepared. Upon applying voltages, the absorption and fluorescence spectra of the AIE polymers can undergo reversible changes, accompanied by variation of their color and emission. By utilizing the controllable characteristics of the polymers, dual-mode display devices were fabricated via a simple spraying technique. More interestingly, a four-dimensional color code device was constructed by adding color change multiplexing to the two-dimensional space, thereby achieving high capacity information storage. Moreover, the color code device can also be applied in the multilevel anti-counterfeiting area. The encrypted information can be dynamically converted under different voltages. Thus, the AIE polymers show great promise for applications in multidimensional information storage and dynamic anti-counterfeiting, and the design strategy may provide a new avenue for advanced information storage and high security technology.

SUBMITTER: Lu L

PROVIDER: S-EPMC8153231 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Cooperative supramolecular polymers with anthracene?endoperoxide photo-switching for fluorescent anti-counterfeiting.

Project description:Innovative technologies are highly pursued for the detection and avoidance of counterfeiting in modern information society. Herein, we report the construction of photo-responsive supramolecular polymers toward fluorescent anti-counterfeit applications, by taking advantage of multicycle anthracene?endoperoxide switching properties. Due to ?-metalation effect, photo-oxygenation of anthracene to endoperoxide is proceeded under the mild visible light irradiation conditions, while the backward conversion occurs spontaneously at room temperature. Supramolecular polymers are formed with cooperative nucleation?elongation mechanism, which facilitate fluorescence resonance energy transfer process via two-component co-assembly strategy. Fluorescence resonance energy transfer efficiency is delicately regulated by either light-triggered anthracene?endoperoxide conversion or vapor-induced monomer-polymer transition, leading to high-contrast fluorescent changes among three different states. On this basis, dual-mode anti-counterfeiting patterns have been successfully fabricated via inkjet printing techniques. Hence, cooperative supramolecular polymerization of photo-fluorochromic molecules represents an efficient approach toward high-performance anti-counterfeit materials with enhanced security reliability, fast response, and ease of operation.

| S-EPMC6162237 | biostudies-literature

Binary temporal upconversion codes of Mn2+-activated nanoparticles for multilevel anti-counterfeiting.

Project description:Optical characteristics of luminescent materials, such as emission profile and lifetime, play an important role in their applications in optical data storage, document security, diagnostics, and therapeutics. Lanthanide-doped upconversion nanoparticles are particularly suitable for such applications due to their inherent optical properties, including large anti-Stokes shift, distinguishable spectroscopic fingerprint, and long luminescence lifetime. However, conventional upconversion nanoparticles have a limited capacity for information storage or complexity to prevent counterfeiting. Here, we demonstrate that integration of long-lived Mn2+ upconversion emission and relatively short-lived lanthanide upconversion emission in a particulate platform allows the generation of binary temporal codes for efficient data encoding. Precise control of the particle's structure allows the excitation feasible both under 980 and 808?nm irradiation. We find that the as-prepared Mn2+-doped nanoparticles are especially useful for multilevel anti-counterfeiting with high-throughput rate of authentication and without the need for complex time-gated decoding instrumentation.Luminescent materials that are capable of binary temporal coding are desirable for multilevel anti-counterfeiting. Here, the authors engineer nanoparticles that produce binary color codes on different timescales by combining the long-lived luminescence of Mn2+ with the relatively short-lived emission of lanthanides.

| S-EPMC5638907 | biostudies-other

Lanthanide-doped heterostructured nanocomposites toward advanced optical anti-counterfeiting and information storage.

Project description:The continuously growing importance of information storage, transmission, and authentication impose many new demands and challenges for modern nano-photonic materials and information storage technologies, both in security and storage capacity. Recently, luminescent lanthanide-doped nanomaterials have drawn much attention in this field because of their photostability, multimodal/multicolor/narrowband emissions, and long luminescence lifetime. Here, we report a multimodal nanocomposite composed of lanthanide-doped upconverting nanoparticle and EuSe semiconductor, which was constructed by utilizing a cation exchange strategy. The nanocomposite can emit blue and white light under 365 and 394 nm excitation, respectively. Meanwhile, the nanocomposites show different colors under 980 nm laser excitation when the content of Tb3+ ions is changed in the upconversion nanoparticles. Moreover, the time-gating technology is used to filter the upconversion emission of a long lifetime from Tb3+ or Eu3+, and the possibilities for modulating the emission color of the nanocomposites are further expanded. Based on the advantage of multiple tunable luminescence, the nanocomposites are designed as optical modules to load optical information. This work enables multi-dimensional storage of information and provides new insights into the design and fabrication of next-generation storage materials.

| S-EPMC9122995 | biostudies-literature

Fabrication of AIE Polymer-Functionalized Reduced Graphene Oxide for Information Storage.

Project description:Reduced graphene oxide (RGO) has been extensively studied and applied in optoelectronic systems, but its unstable dispersion in organic solvents has limited its application. To overcome this problem, the newly designed and developed aggregation-induced emission (AIE) material poly[(9,9-bis(6-azidohexyl)-9H-fluorene)-alt-(9-(4-(1,2,2-triphenylvinyl)phenyl)-9H-carbazole)] (PAFTC) was covalently grafted onto RGO to produce (PFTC-g-RGO). The solubility of two-dimensional graphene was improved by incorporating it into the backbone of PAFTC to form new functional materials. In resistive random access memory (RRAM) devices, PFTC-g-RGO was used as the active layer material after it was characterized. The fabricated Al/PFTC-g-RGO/ITO device exhibited nonvolatile bistable resistive switching performances with a long retention time of over 104 s, excellent endurance of over 200 switching cycles, and an impressively low turn-ON voltage. This study provides important insights into the future development of AIE polymer-functionalized nanomaterials for information storage.

| S-EPMC10488735 | biostudies-literature

Design of intrinsically stretchable and highly conductive polymers for fully stretchable electrochromic devices.

Project description:Stretchable materials are essential for next generation wearable and stretchable electronic devices. Intrinsically stretchable and highly conductive polymers (termed ISHCP) are designed with semi interpenetrating polymer networks (semi-IPN) that enable polymers to be simultaneously applied to transparent electrodes and electrochromic materials. Through a facile method of acid-catalyzed polymer condensation reaction, optimized ISHCP films show the highest electrical conductivity, 1406 S/cm, at a 20% stretched state. Without the blending of any other elastomeric matrix, ISHCP maintains its initial electrical properties under a cyclic stretch-release of over 50% strain. A fully stretchable electrochromic device based on ISHCP is fabricated and shows a performance of 47.7% ∆T and high coloration efficiency of 434.1 cm2/C at 590 nm. The device remains at 45.2% ∆T after 50% strain stretching. A simple patterned electrolyte layer on a stretchable electrochromic device is also realized. The fabricated device, consisting of all-plastic, can be applied by a solution process for large scale production. The ISHCP reveals its potential application in stretchable electrochromic devices and satisfies the requirements for next-generation stretchable electronics.

| S-EPMC7536397 | biostudies-literature

Iron (II) Metallo-Supramolecular Polymers Based on Thieno[3,2-b]thiophene for Electrochromic Applications.

Project description:Four new bis(tpy) unimers with different linkers between the thieno[3,2-b]thiophene-2,5-diyl central unit and terpyridine-4'-yl (tpy) end-groups: no linker (Tt), ethynediyl (TtE), 1,4-phenylene (TtPh) and 2,2'-bithophene-5,5'-diyl (TtB) are prepared, characterized, and assembled with Fe2+ ions to metallo-supramolecular polymers (Fe-MSPs). The Fe-MSP films prepared by spin-casting on Indium Tin Oxide (ITO) glass are characterized by atomic force microscope (AFM) microscopy, cyclic voltammetry, and UV/vis spectroscopy and studied for their electrochromism and effect of the unimer structure on their electrochromic performance. Of the studied MSPs, Fe-Tt shows the highest optical contrast as well as coloration efficiency (CE = 641 cm2 C-1) and the fastest optical response. This makes it an excellent candidate for possible use in electrochromic devices.

| S-EPMC7865520 | biostudies-literature

Conjugated Polymers Containing EDOT Units as Novel Materials for Electrochromic and Resistance Memory Devices.

Project description:Four new multifunctional polymers (P1, P2, P3, and P4) containing EDOT units were synthesized by the Stille coupling reaction. A PL spectrum test found that the introduction of large conjugated groups led to strong fluorescence emission in all polymers. Among the electrochromic and switch properties, these polymer films exhibited reversible color changes, as well as good coloring efficiency. Electrochemical experiments found that the initial oxidation potentials of the polymers were 1.27 V, 1.67 V, 1.78 V, and 1.58 V, respectively. Among them, P3 showed a higher coloring efficiency (283.3 cm2·C-1), and P2 showed a shorter response time (tc = 2.2 s, tb = 2.8 s). These polymers all exhibited electrochromic and resistive switching storage characteristics. They have good solubility in many organic solvents. In the resistance switch memory characteristics, all polymers had obvious memristive properties, and P4 exhibited a larger switch current ratio (2527.42) and a smaller threshold voltage (0.9 V).

| S-EPMC9696808 | biostudies-literature

Quasi-Solid-State Electrochromic Cells with Energy Storage Properties Made with Inkjet Printing.

Project description:In common commercially available electrochromic glass panes, the active materials such as WO3 and NiOx films are typically deposited by either physical vapor or sputtering under vacuum. In the present studies, we report on the inkjet printing method to deposit both electrochromic and ion storage electrode layers under ambient conditions. An ion storage layer based on cerium modified TiO2 and electrochromic nanocrystalline WO3 were both prepared under the wet method and deposited as inks on conductive substrates. Both compounds possess porous morphology facilitating high ion diffusion during electrochemical processes. In particular, the ion storage layer was evaluated in terms of porosity, charge capacity and ion diffusion coefficient. A scaled up 90 cm2 electrochromic device with quasi-solid-state electrolyte was made with the aforementioned materials and evaluated in terms of optical modulation in the visible region, cyclic voltammetry and color efficiency. High contrast between 13.2% and 71.6% for tinted and bleached states measured at 550 nm was monitored under low bias at +2.5 volt and -0.3 volts respectively. Moreover, the calculated energy density equal to 1.95 × 10-3 mWh cm-2 and the high areal capacitance of 156.19 mF cm-2 of the device could combine the electrochromic behavior of the cell with energy storage capability so as to be a promising candidate for future applications into smart buildings.

| S-EPMC7412062 | biostudies-literature

Dual-Cation Electrolytes Crosslinked with MXene for High-Performance Electrochromic Devices.

Project description:MXene, a 2D material, is used as a filler to manufacture polymer electrolytes with high ionic conductivity because of its unique sheet shape, large specific surface area and high aspect ratio. Because MXene has numerous -OH groups on its surface, it can cause dehydration and condensation reactions with poly(4-styrenesulfonic acid) (PSSA) and consequently create pathways for the conduction of cations. The movement of Grotthuss-type hydrogen ions along the cation-conduction pathway is promoted and a high ionic conductivity can be obtained. In addition, when electrolytes composed of a conventional acid or metal salt alone is applied to an electrochromic device (ECD), it does not bring out fast response time, high coloration efficiency and transmittance contrast simultaneously. Therefore, dual-cation electrolytes are designed for high-performance ECDs. Bis(trifluoromethylsulfonyl)amine lithium salt (LiTFSI) was used as a source of lithium ions and PSSA crosslinked with MXene was used as a source of protons. Dual-Cation electrolytes crosslinked with MXene was applied to an indium tin oxide-free, all-solution-processable ECD. The effect of applying the electrolyte to the device was verified in terms of response time, coloration efficiency and transmittance contrast. The ECD with a size of 5 × 5 cm2 showed a high transmittance contrast of 66.7%, fast response time (8 s/15 s) and high coloration efficiency of 340.6 cm2/C.

| S-EPMC8065717 | biostudies-literature

Three Carbazole-Based Polymers as Potential Anodically Coloring Materials for High-Contrast Electrochromic Devices.

Project description:Three carbazole-based conjugated polymers (poly(3,6-di(2-thienyl)carbazole) (PDTC), poly(2,7-bis(carbazol-9-yl)-9,9-spirobifluorene) (PS2CBP), and poly(3,6-bis(N-carbazole)-N-ethylcarbazole) (PCEC)) are synthesized using electrochemical polymerization. The spectroelectrochemical studies indicate that the PDTC, PS2CBP, and PCEC films show reversible electrochromic behaviors in their redox states, and the PS2CBP film shows a distinct color transition with four various colors (gray at 0 V, grayish-green at 1.0 V, moss green at 1.2 V, and foliage green at 1.4 V). The maximum optical contrast of the PS2CBP and PCEC films is 39.83% at 428 nm and 32.41% at 420 nm, respectively, in an ionic liquid solution. Dual-type electrochromic devices (ECDs) that employ PDTC, PS2CBP, or PCEC film as an anodic layer, and PProDOT-Et₂ film as a cathodic layer, were constructed. The as-prepared PCEC/PProDOT-Et₂ ECD shows high optical contrast (38.25% at 586 nm) and high coloration efficiency (369.85 cm² C-1 at 586 nm), and the PS2CBP/PProDOT-Et₂ ECD shows high optical contrast (34.45% at 590 nm), good optical memory, and good long-term cycling stability.

| S-EPMC6431872 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data