Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Optically Transparent and Toughened Poly(methyl methacrylate) Composite Films with Acylated Cellulose Nanofibers.

ABSTRACT: In this work, nanocomposites of poly(methyl methacrylate) (PMMA) with cellulose nanofiber (CNF) were prepared by a solution casting technique. CNF was modified by propionic anhydride (PA) to form surface-propionylated CNF (CNFp) to improve its compatibility with the PMMA matrix. CNF, CNFp, and acetylated CNF were compared with respect to their influence as fillers in PMMA composite films by ultraviolet-visible transmittance, haze values, tensile strength testing, and water contact angle measurement. It was demonstrated that 1 wt % of CNFp has good compatibility and uniform dispersion in the PMMA matrix, as demonstrated by the formation of a smooth surface composite film with good transparency, enhanced tensile properties, improved toughness, and lower wettability. Therefore, PMMA/CNFp composite films have great potential for use in several applications such as lightweight transparent materials, window substitutes, and see-through packaging.

SUBMITTER: Jamaluddin N

PROVIDER: S-EPMC8153788 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

SI ATRP for the Surface Modifications of Optically Transparent Paper Films Made by TEMPO-Oxidized Cellulose Nanofibers.

Project description:Applications of cellulose nanofibers currently match the demands of biodegradable and renewable constituent biocomposites. In this study, we studied the process of preparing TEMPO-oxidized cellulose nanofibers (TOCNs). These nano-sized cellulose fibers (ca. 11 nm) can be fabricated to high transmittance and optically transparent paper (OP) films. Then the OP films can be facilely immobilized initiating sites for the subsequent surface-initiated atom transfer radical polymerization (SI ATRP). We investigated SI ATRP with styrene (St) kinetics and monitored chemical structure changes of the OP surfaces. The obtained OP-g-PSt significantly led to enhance thermal stability and alter the OP surface with hydrophobic compared to that of pristine OP film. Characterization was studied by Fourier transform infrared spectroscopy (FT-IR), powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), UV-Vis spectroscopy, thermogravimetric analyzer (TGA), and water contact angle (WCA) measurements.

| S-EPMC8912791 | biostudies-literature

Highly Toughened and Transparent Biobased Epoxy Composites Reinforced with Cellulose Nanofibrils.

Project description:Biobased nanofillers, such as cellulose nanofibrils (CNFs), have been widely used as reinforcing fillers for various polymers due to their high mechanical properties and potential for sustainable production. In this study, CNF-based composites with a commercial biobased epoxy resin were prepared and characterized to determine the morphology, mechanical, thermal, and barrier properties. The addition of 18?23 wt % of CNFs to epoxy significantly increased the modulus, strength and strain of the resulting composites. The addition of fibrils led to an overall increase in strain energy density or modulus of toughness by almost 184 times for the composites compared to the neat epoxy. The addition of CNFs did not affect the high thermal stability of epoxy. The presence of nanofibrils had a strong reinforcing effect in both glassy and glass transition region of the composites. A significant decrease in intensity in tan ? peak for the epoxy matrix occurred with the addition of CNFs, indicating a high interaction between fibrils and epoxy during the phase transition. The presence of highly crystalline and high aspect ratio CNFs (23 wt %) decreased the water vapour permeability of the neat epoxy resin by more than 50%.

| S-EPMC6523465 | biostudies-literature

Dispersion of Cellulose Nanofibers in Methacrylate-Based Nanocomposites.

Project description:Poly(methylmethacrylate-co-methacrylic acid) (PMMA-co-MAA) polymers were prepared via cobalt-mediated free radical copolymerization and were characterized after synthesis. The synthesis led to a 98.5% conversion and a final ratio between the two units, MMA/MAA, was equal to 63:37 mol%. PMMA-co-MAA was then used as a matrix for cellulose-based nanocomposites to tailor filler compatibility, thanks to the presence of carboxylic groups capable of generating strong H-bonds with the cellulose surface. Cellulose nanofibers (CNFs) were dispersed using a solution with a mixture of two solvents to tailor compatibility of both the components. For this purpose, CNFs were successfully re-dispersed in methanol using the solvent exchange method and tetrahydrofuran/methanol mixtures at different ratios were used for the preparation of the films. Fully transparent films of PMMA-co-MAA + CNF were prepared up to 15 wt% of CNF with a good dispersion in the matrix. This dispersion state leads to the reinforcement of the polymethacrylate matrix, increasing its tensile strength whilst preserving optical transparency.

| S-EPMC10421470 | biostudies-literature

Thermal conductivity enhancement in electrospun poly(vinyl alcohol) and poly(vinyl alcohol)/cellulose nanocrystal composite nanofibers.

Project description:The thermal conductivity enhancement of neat poly(vinyl alcohol) and poly(vinyl alcohol) (PVA)/cellulose nanocrystal (CNC) composite was attempted via electrospinning. The suspended microdevice technique was applied to measure the thermal conductivity of electrospun nanofibers (NFs). Neat PVA NFs and PVA/CNC NFs with a diameter of approximately 200 nm showed thermal conductivities of 1.23 and 0.74 W/m-K, respectively, at room temperature, which are higher than that of bulk PVA by factors of 6 and 3.5, respectively. Material characterization by Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis confirmed that the thermal conductivity of the PVA/CNC NFs was enhanced by the reinforcement of their backbone rigidity, while that of the neat PVA NFs was attributed to the increase in their crystallinity that occurred during the electrospinning.

| S-EPMC6395720 | biostudies-literature

Optically transparent recombinant silk-elastinlike protein polymer films.

Project description:Recombinant protein polymers, evaluated extensively as biomaterials for applications in drug delivery and tissue engineering, are rarely reported as being optically transparent. Here we report the notable optical transparency of films composed of a genetically engineered silk-elastinlike protein polymer SELP-47K. SELP-47K films of 100 ?m in thickness display a transmittance of 93% in the wavelength range of 350-800 nm. While covalent cross-linking of SELP-47K via glutaraldehyde decreases its transmittance to 77% at the wavelength of 800 nm, noncovalent cross-linking using methanol slightly increases it to 95%. Non- and covalent cross-linking of SELP-47K films also influences their secondary structures and water contents. Cell viability and proliferation analyses further reveal the excellent cytocompatibility of both non- and covalently cross-linked SELP-47K films. The combination of high optical transparency and cytocompatibility of SELP-47K films, together with their previously reported outstanding mechanical properties, suggests that this protein polymer may be useful in unique, new biomedical applications.

| S-EPMC3041846 | biostudies-literature

Transparent Polymer Blends of Poly(methyl methacrylate) and Poly(propylene glycol).

Project description:Polymer blends, obtained by polymerization of methyl methacrylate in the presence of poly(propylene glycol), are investigated. Poly(propylene glycol) acts as a plasticizer, significantly lowering poly(methyl methacrylate)'s glass transition temperature and decreasing its elasticity modulus and yield stress. The mixture of methyl methacrylate with poly(propylene glycol) is more stable than its mixture with currently used poly(ethylene glycol), which leads to more uniform distribution and higher possible content of the plasticizer. Unlike low molecular weight plasticizers, poly(propylene glycol) is less prone to migration and exudation during manufacturing process and in use, and has low toxicity. Dynamic mechanical thermal analysis, compression testing and X-ray diffraction were used to investigate how the properties of the material depend on the content and molecular weight of the poly(propylene glycol) in the polymer blend. It was shown that the dependence of the glass transition temperature of methyl methacrylate polymerized in the presence of poly(propylene glycol) on the molar fraction of propylene glycol units is linear, and poly(propylene glycol) with lower molecular weight affects properties of the material stronger than poly(propylene glycol) with higher molecular weight. Therefore, the addition of poly(propylene glycol) allows to control the properties of poly(methyl methacrylate) easily and within wide range.

| S-EPMC9183039 | biostudies-literature

Effects of Acid-Anhydride-Modified Cellulose Nanofiber on Poly(Lactic Acid) Composite Films.

Project description:In this study, we investigated the effect of the addition of cellulose nanofiber (CNF) fillers on the performance of poly(lactic acid) (PLA). Modification of the hydroxyl group of cellulose to the acyl group by acid anhydrides changed the compatibility of the CNF with PLA. CNF was modified by acetic anhydride, propionic anhydride, and butyric anhydride to form surface-modified acetylated CNF (CNFa), propionylated CNF (CNFp), and butyrylated CNF (CNFb), respectively, to improve the compatibility with the PLA matrix. The effects of the different acid anhydrides were compared based on their rates of reaction in the acylation process. PLA with modified cellulose nanofiber fillers formed smoother surfaces with better transparency, mechanical, and wettability properties compared with the PLA/CNF composite film. The effects of CNFa, CNFp, and CNFb on the PLA matrix were compared, and it was found that CNFp was the best filler for PLA.

| S-EPMC8002836 | biostudies-literature

Preparation of Surlyn films reinforced with cellulose nanofibres and feasibility of applying the transparent composite films for organic photovoltaic encapsulation.

Project description:This research concerns the development of Surlyn film reinforced with micro-/nanofibrillated celluloses (MFC) for use as an encapsulant in organic photovoltaic (OPV) cells. The aim of this work was to investigate the effects of fibre types and the mixing methods on the structure-properties of the composite films. Three types of cellulose micro/nanofibrils were prepared: the as-received MFC, the dispersed MFC and the esterified MFC. The fibres were mixed with Surlyn via an extrusion process, using two different mixing methods. It was found that the extent of fibre disintegration and tensile modulus of the composite films prepared by the master-batching process was superior to that of the composite system prepared by the direct mixing method. Using the esterified MFC as a reinforcement, compatibility between polymer and the fibre increased, accompanied with the improvement of the percentage elongation of the Surlyn composite film. The percentage of light transmittance of the Surlyn/MFC films was above 88, regardless of the fibre types and fibre concentrations. The water vapour transmission rate of the Surlyn/esterified MFC film was 65% lower than that of the neat Surlyn film. This contributed to the longer lifetime of the OPV encapsulated with the Surlyn/esterified MFC film.

| S-EPMC5666266 | biostudies-literature

Super-Toughened Poly(lactic Acid) with Poly(ε-caprolactone) and Ethylene-Methyl Acrylate-Glycidyl Methacrylate by Reactive Melt Blending.

Project description:In recent years, poly(lactic acid) (PLA) has attracted more and more attention as one of the most promising biobased and biodegradable polymers. However, the inherent brittleness significantly limits its wide application. Here, ternary blends of PLA, poly(ε-caprolactone) (PCL) with various amounts of ethylene-methyl acrylate-glycidyl methacrylate (EMA-GMA) terpolymer were fabricated through reactive melt blending in order to improve the toughness of PLA. The effect of different addition amounts of EMA-GMA on the mechanical properties, interfacial compatibility and phase morphology of PLA/PCL blends were studied. The reactions between the epoxy groups of EMA-GMA and carboxyl and hydroxyl end groups of PLA and PCL were investigated thorough a Fourier transform infrared (FT-IR). The miscibility and thermal behavior of the blends were studied through a dynamic mechanical analysis (DMA), differential scanning calorimetric (DSC) and X-ray diffraction (XRD). The phase morphology and impact fracture surface of the blends were also investigated through a scanning electron microscope (SEM). With the addition of 8 phr EMA-GMA, a PLA/PCL (90 wt %:10 wt %)/EMA-GMA ternary blend presenting a suitable multiple stacked phase structure with an optimum interfacial adhesion exhibited an elongation at break of 500.94% and a notched impact strength of 64.31 kJ/m2 with a partial break impact behavior. Finally, the toughening mechanism of the supertough PLA based polymers have been established based on the above analysis.

| S-EPMC6571553 | biostudies-literature

Transparent and Homogenous Cellulose Nanocrystal/Lignin UV-Protection Films.

Project description:In the context of valorization of lignin produced from the pulp and paper industries, biodegradable UV-protection films were prepared using lignin and cellulose nanocrystals (CNCs). Initially, CNC films were optimized for improving their transparency by studying the effect of various sodium hydroxide (NaOH) concentrations. Maximum (%) transmittance of CNC film was obtained for NaOH addition between 3 and 4 wt %. The optimized CNC suspensions were used for incorporating alkaline lignin (AL) and softwood kraft lignin (SKL) in various concentrations (1-10 wt %). Morphological characterization showed homogeneity of the lignin distribution in CNC/lignin films. Complete UV blocking was achieved at 10 wt % lignin (AL or SKL) in CNC films. Cross-polarized optical microscopy and scanning electron microscopic images of films showed some degrees of global alignment of CNC rods upon addition of NaOH, which remained unaffected by lignin addition. Lignin modification through acetylation reduced the lignin color and improved visible light transmission of films without significantly affecting the UV-absorption properties. Presence of lignin also enhanced the thermal and contact angle stability of the films. This work shows for the first time that CNC aqueous suspensions with and without containing lignin could be tuned through the addition of NaOH to produce transparent and homogenous films, providing a simple and green approach in engineering CNC/lignin UV-protection films.

| S-EPMC6173482 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data