Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A Sulfhydryl Azobenzene-Modified Polyaniline/Silver Electrode and Its Photoswitching Electrochemical Performance.

ABSTRACT: In this work, a sulfhydryl-functionalized azobenzene derivative (Azo) was synthesized and polyaniline/silver was modified (PANI/Ag) to make a nanocomposite (PANI/Ag/Azo). A series of characterization techniques like¹HNMR, UV-vis absorption spectra, Raman spectra, FT-IR, XRD, SEM, TEM, and TGA was employed to study Azo, PANI/Ag, and PANI/Ag/Azo. Electrochemical properties were measured by cyclic voltammetry (CV) and galvanostatic charging/discharging (GCD). CV showed that UV and blue light had hardly any effect on PANI/Ag. However, with the prolonged exposure time of UV light, the maximum CV current density of PANI/Ag/Azo rose from 1.24 to 2.72 A g^-1. Then, after 20 min of blue light irradiation, the maximum current density gradually recovered (from 2.72 to 1.26 A g^-1). The GCD also obtained similar results. After formula calculation, the specific capacitance of PANI/Ag/Azo also presented a reversible trend under the alternating irradiation of UV light and blue light. All the results show that PANI/Ag/Azo has a good photoelectric response, and its electrochemical performance can be reversibly adjusted by light. This result provides a new design idea for developing electrode materials with real-time electrochemical properties.

SUBMITTER: Xue C

PROVIDER: S-EPMC8154009 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Silver Nanoparticle Modified Electrode Covered by Graphene Oxide for the Enhanced Electrochemical Detection of Dopamine.

Project description:Several neurological disorders such as Alzheimer's disease and Parkinson's disease have become a serious impediment to aging people nowadays. One of the efficient methods used to monitor these neurological disorders is the detection of neurotransmitters such as dopamine. Metal materials, such as gold and platinum, are widely used in this electrochemical detection method; however, low sensitivity and linearity at low dopamine concentrations limit the use of these materials. To overcome these limitations, a silver nanoparticle (SNP) modified electrode covered by graphene oxide for the detection of dopamine was newly developed in this study. For the first time, the surface of an indium tin oxide (ITO) electrode was modified using SNPs and graphene oxide sequentially through the electrochemical deposition method. The developed biosensor provided electrochemical signal enhancement at low dopamine concentrations in comparison with previous biosensors. Therefore, our newly developed SNP modified electrode covered by graphene oxide can be used to monitor neurological diseases through electrochemical signal enhancement at low dopamine concentrations.

| S-EPMC5750767 | biostudies-literature

Azobenzene Photoswitching with Near-Infrared Light Mediated by Molecular Oxygen.

Project description:Efficient photoisomerization between the cis and the trans states of azobenzenes using low-energy light is desirable for a range of applications in, e.g., photobiology yet challenging to accomplish directly with modified azobenzenes. Herein, we utilize molecular iodine as a photocatalyst to induce indirect cis-to-trans isomerization of 4,4'-dimethoxyazobenzene with 770 nm near-infrared light, showing robustness during more than 1000 cycles in ambient conditions. Intriguingly, the catalysis is mediated by molecular oxygen, and we demonstrate that other singlet-oxygen-generating photosensitizers besides iodine, i.e., palladium phthalocyanine, catalyze the isomerization as well. Thus, we envision that the approach can be further improved by employing other catalysts with suitable photoelectrochemical properties. Further studies are needed to explore the applicability of the approach with other azobenzene derivatives.

| S-EPMC8607416 | biostudies-literature

Preparation and Electrochemical Characterization of Mesoporous Polyaniline-Silica Nanocomposites as an Electrode Material for Pseudocapacitors.

Project description:Mesoporous polyaniline-silica nanocomposites with a full interpenetrating structure for pseudocapacitors were synthesized via the vapor phase approach. The morphology and structure of the nanocomposites were deeply investigated by scanning electron microscopy, infrared spectroscopy, X-ray diffraction, thermal gravimetric analysis and nitrogen adsorption-desorption tests. The results present that the mesoporous nanocomposites possess a uniform particle morphology and full interpenetrating structure, leading to a continuous conductive polyaniline network with a large specific surface area. The electrochemical performances of the nanocomposites were tested in a mixed solution of sulfuric acid and potassium iodide. With the merits of a large specific surface area and suitable pore size distribution, the nanocomposite showed a large specific capacitance (1702.68 farad (F)/g) due to its higher utilization of the active material. This amazing value is almost three-times larger than that of bulk polyaniline when the same mass of active material was used.

| S-EPMC5507039 | biostudies-other

Potentiometric Phosphate Ion Sensor Based on Electrochemical Modified Tungsten Electrode.

Project description:Determination of phosphate ions in aqueous solutions attracts a great deal of interest in the areas of environment, medicine, and agriculture. As phosphoric acid is a poly basic acid, the different forms of existence at different pH result in direct determination facing a big challenge. Herein, we reported a potentiometric phosphate ion sensor based on a surface-modified tungsten electrode. Pure tungsten was electrodeposited at a constant potential of 0.2 V versus Ag|AgCl in Na2HPO4. WO3 and H3O40PW12·xH2O were electrodeposited on the surface of the tungsten electrode. The modified tungsten electrode was used as a working electrode in a two-electrode system to detect the concentration of phosphate ions in aqueous solutions. The detection limit of the modified tungsten electrode for phosphate ions is 10-6 M from pH 7 to pH 8 and 10-5 M from pH 9 to pH 10. It has good selectivity to other common anions. The long-term monitoring experiment showed that the potential fluctuation was less than ±3 mV in 24 h. Compared to conventional determination methods, the current phosphate ion sensor showed a close value in a real sample. The mechanism of phosphate ion response was investigated in detail. This sensor possesses advantages of simple manufacture, low cost, a wide pH range for detecting, and good selectivity.

| S-EPMC8173557 | biostudies-literature

Electrochemical Sensing of Biotin Using Nafion-Modified Boron-Doped Diamond Electrode.

Project description:Nafion formed on the surface of a boron-doped diamond electrode allows for a chemosensing system for biotin. The modified electrode is capable of oxidizing biotin and offers a detection limit of 5 nM, the average normal level of biotin in blood plasma. The developed method was successfully applied to determine biotin in human plasma samples and a popular health product as two popular models.

| S-EPMC6072246 | biostudies-literature

Investigation of L-Tryptophan Electrochemical Oxidation with a Graphene-Modified Electrode.

Project description:A graphene sample (EGr) was prepared by electrochemical exfoliation of graphite rods in solution containing 0.05 M (NH4)2SO4 + 0.1 M H3BO3 + 0.05 M NaCl. The exfoliation was performed by applying a constant voltage (12 V) between the graphite rods, while the temperature was kept constant (18 °C) with a temperature-controlled cryostat. The structural investigation of the graphene sample, performed by X-ray powder diffraction (XRD), revealed that the sample consists of a mixture of few-layer (69%), multi-layer graphene (14%) and graphene oxide (17%). In addition, XPS analysis proved that the sample was triple-doped with heteroatoms such as nitrogen (1.7 at%), sulfur (2.5 at%), and boron (3 at%). The sample was deposited onto the surface of a clean, glassy carbon electrode (GC) and investigated for the non-enzymatic electrochemical detection of L-tryptophan (TRP). The electrocatalytic properties of the EGr/GC electrode led to a considerable decrease in the oxidation potential from +0.9 V (bare GC) to +0.72 V. In addition, the EGr/GC electrode has higher sensitivity (two times) and a lower detection limit (ten times) in comparison with the bare GC electrode.

| S-EPMC7911164 | biostudies-literature

Nanocoral-like Polyaniline-Modified Graphene-Based Electrochemical Paper-Based Analytical Device for a Portable Electrochemical Sensor for Xylazine Detection.

Project description:A portable electrochemical device for xylazine detection is presented for the first time. An electrochemical paper-based analytical device (ePAD) was integrated with a smartphone. The fabrication of the ePAD involved wax printing, low-tack transfer tape, and cutting and screen-printing techniques. Graphene ink was coated on the substrate and modified with nanocoral-like polyaniline, providing an electron transfer medium with a larger effective surface area that promoted charge transfer. The conductive ink on the ePAD presented a thickness of 25.0 ± 0.9 μm for an effective surface area of 0.374 cm2. This sensor was then tested directly on xylazine using differential pulse voltammetry. Two linear responses were obtained: from 0.2 to 5 μg mL-1 and from 5 to 100 μg mL-1. The detection limit was 0.06 μg mL-1. Reproducibility was tested on 10 preparations. The relative standard deviation was less than 5%. The applicability of the sensor was evaluated with beverage samples spiked with trace xylazine. Recoveries ranged from 84 ± 4 to 105 ± 2%. The developed sensor demonstrated excellent accuracy in the detection of trace xylazine. It would be possible to develop the portable system to detect various illicit drugs to aid forensic investigations.

| S-EPMC9088932 | biostudies-literature

Light-enhanced liquid-phase exfoliation and current photoswitching in graphene-azobenzene composites.

Project description:Multifunctional materials can be engineered by combining multiple chemical components, each conferring a well-defined function to the ensemble. Graphene is at the centre of an ever-growing research effort due to its combination of unique properties. Here we show that the large conformational change associated with the trans-cis photochemical isomerization of alkyl-substituted azobenzenes can be used to improve the efficiency of liquid-phase exfoliation of graphite, with the photochromic molecules acting as dispersion-stabilizing agents. We also demonstrate reversible photo-modulated current in two-terminal devices based on graphene-azobenzene composites. We assign this tuneable electrical characteristics to the intercalation of the azobenzene between adjacent graphene layers and the resulting increase in the interlayer distance on (photo)switching from the linear trans-form to the bulky cis-form of the photochromes. These findings pave the way to the development of new optically controlled memories for light-assisted programming and high-sensitive photosensors.

| S-EPMC4829665 | biostudies-literature

High-Performance 3D Nanostructured Silver Electrode for Micro-Supercapacitor Application.

Project description:In the current energy crisis scenario, the development of renewable energy forms such as energy storage systems among the supercapacitors is an urgent need as a tool for environmental protection against increasing pollution. In this work, we have designed a novel 3D nanostructured silver electrode through an antireplica/replica template-assisted procedure. The chemical surface and electrochemical properties of this novel 3D electrode have been studied in a 5 M KOH electrolyte. Microstructural characterization and compositional analysis were studied by SEM, energy-dispersive X-ray spectroscopy, XRD technique, and Kripton adsorption at -198 °C, together with cyclic voltammetry and galvanostatic charge-discharge cycling measurements, Coulombic efficiency, cycle stability, and their leakage current drops, in addition to the self-discharge and electrochromoactive behavior, were performed to fully characterize the 3D nanostructured electrode. Large areal capacitance value of 0.5 F/cm2 and Coulombic efficiency of 97.5% are obtained at a current density of 6.4 mA/cm2 for a voltage window of 1.2 V (between -0.5 and 0.8 V). The 3D nanostructured silver electrode exhibits excellent capacitance retention (95%) during more than 2600 cycles, indicating a good cyclic stability. Additionally, the electrode delivers a high energy density of around 385.87 μWh/cm2 and a power density value of 3.82 μW/cm2 and also displays an electrochromoactive behavior. These experimental results strongly support that this versatile combined fabrication procedure is a suitable strategy for improving the electrochemical performances of 3D nanostructured silver electrodes for applications as micro-supercapacitors or in electrochemical devices.

| S-EPMC10620899 | biostudies-literature

High Aspect Ratio Silver Nanogrids by Bottom-Up Electrochemical Growth as Transparent Electrode

Project description: Not available

| S-EPMC10964241 | biostudies-literature