Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

In Situ Growth of Metallic 1T-MoS₂ on TiO₂ Nanotubes with Improved Photocatalytic Performance.

ABSTRACT: 1T-MoS₂ is in situ grown on TiO₂ nanotubes (TNTs) using a hydrothermal method, forming a 1T-MoS₂@TNTs composite, which is confirmed by its physical characterization. The prepared composites show enhanced photocatalytic performance for the degradation of tetracycline hydrochloride under visible light, and the improved photocatalytic activity is closely related to the loaded amount of 1T-MoS₂. Therein, 0.5 wt % 1T-MoS₂@TNTs can degrade 57% in 1 h, which is the highest photocatalytic efficiency observed in experiments so far. It is speculated that the introduction of 1T-MoS₂ may optimize light absorption and charge separation/transport. The active species are identified and the reaction mechanism is proposed here.

SUBMITTER: Chen M

PROVIDER: S-EPMC8154240 | biostudies-literature | 2021 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

In Situ Growth of Metallic 1T-MoS2 on TiO2 Nanotubes with Improved Photocatalytic Performance.

Chen Miaogen M Sun Tao T Zhao Wan W Yang Xiuru X Chang Wenya W Qian Xiaoxiao X Yang Qian Q Chen Zhi Z

ACS omega 20210504 19

1T-MoS2 is in situ grown on TiO2 nanotubes (TNTs) using a hydrothermal method, forming a 1T-MoS2@TNTs composite, which is confirmed by its physical characterization. The prepared composites show enhanced photocatalytic performance for the degradation of tetracycline hydrochloride under visible light, and the improved photocatalytic activity is closely related to the loaded amount of 1T-MoS2. Therein, 0.5 wt % 1T-MoS2@TNTs can degrade 57% in ...[more]

PMID: 34056429

Similar Datasets

Controllable growth of MoS2 nanosheets on TiO2 burst nanotubes and their photocatalytic activity.

Project description:MoS2 nanosheets were grown on TiO2 nanotubes by the simple hydrothermal method for the first time. The layer-by-layer growth of MoS2 nanosheets led to a significant increase in the specific surface area of TiO2/MoS2 burst tube composites compared with TiO2 burst tubes, a significantly enhanced ability to separate photo-induced carriers, and synergistic adsorption and visible light catalytic activity of dye molecules. The maximum adsorption (q max) of MB was 72.46 mg g-1. In addition, 94.1% of MB could be degraded after 30 minutes of visible light irradiation. The microsurface morphology, structure, chemical composition, element valence and band width of TiO2/MoS2 nanocomposites were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectroscopy (DRS) and photoluminescence spectroscopy (PL). The mechanism of photocatalytic reaction was studied via free radical capture experiments.

| S-EPMC9057720 | biostudies-literature

Atomically engineering activation sites onto metallic 1T-MoS2 catalysts for enhanced electrochemical hydrogen evolution.

Project description:Engineering catalytic sites at the atomic level provides an opportunity to understand the catalyst's active sites, which is vital to the development of improved catalysts. Here we show a reliable and tunable polyoxometalate template-based synthetic strategy to atomically engineer metal doping sites onto metallic 1T-MoS2, using Anderson-type polyoxometalates as precursors. Benefiting from engineering nickel and oxygen atoms, the optimized electrocatalyst shows great enhancement in the hydrogen evolution reaction with a positive onset potential of ~ 0 V and a low overpotential of -46 mV in alkaline electrolyte, comparable to platinum-based catalysts. First-principles calculations reveal co-doping nickel and oxygen into 1T-MoS2 assists the process of water dissociation and hydrogen generation from their intermediate states. This research will expand on the ability to improve the activities of various catalysts by precisely engineering atomic activation sites to achieve significant electronic modulations and improve atomic utilization efficiencies.

| S-EPMC6395606 | biostudies-literature

Photocatalytic H2 Evolution on TiO2 Assembled with Ti3C2 MXene and Metallic 1T-WS2 as Co-catalysts.

Project description:The biggest challenging issue in photocatalysis is efficient separation of the photoinduced carriers and the aggregation of photoexcited electrons on photocatalyst's surface. In this paper, we report that double metallic co-catalysts Ti3C2 MXene and metallic octahedral (1T) phase tungsten disulfide (WS2) act pathways transferring photoexcited electrons in assisting the photocatalytic H2 evolution. TiO2 nanosheets were in situ grown on highly conductive Ti3C2 MXenes and 1T-WS2 nanoparticles were then uniformly distributed on TiO2@Ti3C2 composite. Thus, a distinctive 1T-WS2@TiO2@Ti3C2 composite with double metallic co-catalysts was achieved, and the content of 1T phase reaches 73%. The photocatalytic H2 evolution performance of 1T-WS2@TiO2@Ti3C2 composite with an optimized 15 wt% WS2 ratio is nearly 50 times higher than that of TiO2 nanosheets because of conductive Ti3C2 MXene and 1T-WS2 resulting in the increase of electron transfer efficiency. Besides, the 1T-WS2 on the surface of TiO2@Ti3C2 composite enhances the Brunauer-Emmett-Teller surface area and boosts the density of active site.

| S-EPMC7770731 | biostudies-literature

Highly effective photocatalytic performance of {001}-TiO2/MoS2/RGO hybrid heterostructures for the reduction of Rh B.

Project description:Effective separation and rapid transfer of photogenerated electron-hole pairs are key features of photocatalytic materials with high catalytic activity, which could be achieved in co-catalysts. It is reported that the two-dimensional (2D) MoS2 is a promising co-catalyst due to its unique semi-conductive properties and graphene-like layered structure. However, the application of MoS2 as a co-catalyst is limited by its poor electrical conductivity. On the other hand, it is worth noting that TiO2 possesses reactive crystal facets, which is one of the dominant mechanisms for the separation of photogenerated electron-hole pairs. In this work, we prepared MoS2/RGO hybrids as co-catalysts which were doped to TiO2 with highly reactive {001} planes via the hydrothermal method. It was found that the {001}-TiO2/MoS2/RGO photocatalysts with 7 wt% MoS2/RGO co-catalyst show the highest photodegradation activity for the degradation of Rh B under visible light irradiation (λ > 400 nm), which could result from the synergy of the effective separation of electron-hole pairs by the {001} facets in TiO2 and the rapid transfer of electron-hole pairs in MoS2/RGO. The results show that the {001}-TiO2/MoS2/RGO hybrid is a low-cost and stable photocatalyst for the effective degradation of Rh B under visible light.

| S-EPMC9064259 | biostudies-literature

A comparative study on the photocatalytic degradation of organic dyes using hybridized 1T/2H, 1T/3R and 2H MoS2 nano-sheets.

Project description:MoS2 is a very attractive material and has been well studied for potential applications in various areas. However, due to the wide variety of factors affecting the molecular and electronic structure of MoS2, several contradictory reports about the adsorptive and photocatalytic properties of such materials have been published. In most of these reports, the effect of the actual phase of the materials on the properties was neglected. Here, different phases of MoS2 nanosheets (1T/2H, 1T/3R and 2H) have been obtained using the hydrothermal method with different Mo : S molar ratios and different autoclave filling ratios. The obtained materials have been thoroughly characterized using Raman, UV-vis, powder XRD, SEM, TEM and XPS measurements in order to accurately identify the existing phases in each material. A comparative study of the photocatalytic organic dye degradation efficiency under white light irradiation has been conducted using methyl orange to correlate the different activity of each material to the respective phase composition. The results indicate a much higher performance of the 1T/2H phase compared to the 2H and 3R phases. Detailed computational studies of the different phases revealed the emergence of mid-gap states upon introducing 1T sites into the 2H lattice. This leads to the improvement of the photocatalytic activity of 1T/2H compared to the other prepared materials.

| S-EPMC9083085 | biostudies-literature

Rationally Designed CdS-Based Ternary Heterojunctions: A Case of 1T-MoS2 in CdS/TiO2 Photocatalyst.

Project description:As promising heterojunction photocatalysts, the binary CdS-based heterojunctions were investigated extensively. In most of the reported CdS-based heterojunctions, however, electrons come from the semiconductor with wide band gap (e.g., TiO2) would limit the visible-light absorption of CdS and hence lower the performance. In this work, we introduced 1T-MoS2 to form a novel ternary heterojunction, namely CdS/1T-MoS2/TiO2, in which 1T-MoS2 has more positive conduction band than CdS and TiO2. The hydrogen evolution rate of CdS/1T-MoS2/TiO2 reaches 3.15 mmol g-1 h-1, which is approximately 12 and 35 times higher than that of pure CdS and CdS/TiO2 binary heterojunction under the same conditions, respectively. This performance enhancement could be attributed to the presence of 1T-MoS2 and a plausible mechanism is proposed based on photoelectrochemical characterizations. Our results illustrate that the performance of CdS-based heterojunctions for solar hydrogen evolution can be greatly improved by appropriate materials selection.

| S-EPMC7823533 | biostudies-literature

MoS2 nanotubes loaded with TiO2 nanoparticles for enhanced electrocatalytic hydrogen evolution.

Project description:Efficient and stable non-precious metal catalysts composed of earth-abundant elements are crucial to the hydrogen evolution reaction (HER) in high-energy conversion efficiency. Herein, TiO2/MoS2-NTs catalyst, in which the MoS2 nanotubes were loaded with TiO2 nanoparticles, have been synthesized via a facile solvothermal and hydrothermal method. The as-prepared TiO2/MoS2-NTs electrocatalyst demonstrated enhanced electrocatalytic hydrogen evolution performance compared with MoS2-NTs. Electrochemical measurements reveal the overpotential and Tafel slope of as-prepared TiO2/MoS2-NTs are -0.21 V and 42 mV dec-1. The HER improvement is proposed to be attributed to the increased edge sites results from the interfaces and synergic effect between TiO2 nanoparticles and MoS2 nanotubes.

| S-EPMC9070309 | biostudies-literature

Improved Solar-Driven Photocatalytic Performance of Highly Crystalline Hydrogenated TiO2 Nanofibers with Core-Shell Structure.

Project description:Hydrogenated titanium dioxide has attracted intensive research interests in pollutant removal applications due to its high photocatalytic activity. Herein, we demonstrate hydrogenated TiO2 nanofibers (H:TiO2 NFs) with a core-shell structure prepared by the hydrothermal synthesis and subsequent heat treatment in hydrogen flow. H:TiO2 NFs has excellent solar light absorption and photogenerated charge formation behavior as confirmed by optical absorbance, photo-Kelvin force probe microscopy and photoinduced charge carrier dynamics analyses. Photodegradation of various organic dyes such as methyl orange, rhodamine 6G and brilliant green is shown to take place with significantly higher rates on our novel catalyst than on pristine TiO2 nanofibers and commercial nanoparticle based photocatalytic materials, which is attributed to surface defects (oxygen vacancy and Ti3+ interstitial defect) on the hydrogen treated surface. We propose three properties/mechanisms responsible for the enhanced photocatalytic activity, which are: (1) improved absorbance allowing for increased exciton generation, (2) highly crystalline anatase TiO2 that promotes fast charge transport rate, and (3) decreased charge recombination caused by the nanoscopic Schottky junctions at the interface of pristine core and hydrogenated shell thus promoting long-life surface charges. The developed H:TiO2 NFs can be helpful for future high performance photocatalysts in environmental applications.

| S-EPMC5244370 | biostudies-literature

Construction of 1T@2H MoS2 heterostructures in situ from natural molybdenite with enhanced electrochemical performance for lithium-ion batteries.

Project description:Natural molybdenite, an inexpensive and naturally abundant material, can be directly used as an anode material for lithium-ion batteries. However, how to release the intrinsic capacity of natural molybdenite to achieve high rate performance and high capacity is still a challenge. Herein, we introduce an innovative, effective, and one-step approach to preparing a type of heterostructure material containing 1T@2H MoS2 crafted from insertion and expansion of natural molybdenite. The metallic 1T phase formed in situ can significantly improve the electronic conductivity of MoS2. At the same time, 1T@2H MoS2 heterostructures can provide an internal electric field (E-field) to accelerate the migration rate of electrons and ions, promote the charge transfer behaviour, and ensure the reaction reversibility and lithium storage kinetics. Such worm-like 1T@2H MoS2 heterostructures also have a large specific surface area and a large number of defects, which will help shorten the lithium-ion transmission distance and provide more ion transmission channels. As a result, it exhibits a discharge capacity of 788 mA h g-1 remarkably at 100 mA g-1 after 485 cycles and stable cycling performance. It also shows excellent magnification performance of 727 mA h g-1 at 1 A g-1, compared to molybdenite concentrate. Briefly, this work's heterostructure architectures open up a new avenue for applying natural molybdenite in lithium-ion batteries, which has the potential to achieve large-scale commercial applications.

| S-EPMC9042300 | biostudies-literature

Enhanced Photocatalytic Paracetamol Degradation by NiCu-Modified TiO2 Nanotubes: Mechanistic Insights and Performance Evaluation.

Project description:Anodic TiO2 nanotube arrays decorated with Ni, Cu, and NiCu alloy thin films were investigated for the first time for the photocatalytic degradation of paracetamol in water solution under UV irradiation. Metallic co-catalysts were deposited on TiO2 nanotubes using magnetron sputtering. The influence of the metal layer composition and thickness on the photocatalytic activity was systematically studied. Photocatalytic experiments showed that only Cu-rich co-catalysts provide enhanced paracetamol degradation rates, whereas Ni-modified photocatalysts exhibit no improvement compared with unmodified TiO2. The best-performing material was obtained by sputtering a 20 nm thick film of 1:1 atomic ratio NiCu alloy: this material exhibits a reaction rate more than doubled compared with pristine TiO2, enabling the complete degradation of 10 mg L-1 of paracetamol in 8 h. The superior performance of NiCu-modified systems over pure Cu-based ones is ascribed to a Ni and Cu synergistic effect. Kinetic tests using selective holes and radical scavengers unveiled, unlike prior findings in the literature, that paracetamol undergoes direct oxidation at the photocatalyst surface via valence band holes. Finally, Chemical Oxygen Demand (COD) tests and High-Resolution Mass Spectrometry (HR-MS) analysis were conducted to assess the degree of mineralization and identify intermediates. In contrast with the existing literature, we demonstrated that the mechanistic pathway involves direct oxidation by valence band holes.

| S-EPMC11477857 | biostudies-literature