Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Gas Phase Glycerol Valorization over Ceria Nanostructures with Well-Defined Morphologies.

ABSTRACT: Glycerol solutions were vaporized and reacted over ceria catalysts with different morphologies to investigate the relationship of product distribution to the surface facets exposed, particularly, the yield of bio-renewable methanol. Ceria was prepared with cubic, rodlike, and polyhedral morphologies via hydrothermal synthesis by altering the concentration of the precipitating agent or synthesis temperature. Glycerol conversion was found to be low over the ceria with a cubic morphology, and this was ascribed to both a low surface area and relatively high acidity. Density functional theory calculations also showed that the (100) surface is likely to be hydroxylated under reaction conditions which could limit the availability of basic sites. Methanol space-time-yields over the polyhedral ceria samples were more than four times that for the cubic material at 400 °C, where 201 g of methanol was produced per hour per kilogram of the catalyst. Under comparable glycerol conversions, we show that the rodlike and polyhedral catalysts produce a major intermediate to methanol, hydroxyacetone (HA), with a selectivity of ca. 45%, but that over the cubic sample, this was found to be 15%. This equates to a 13-fold increase in the space-time-yield of HA over the polyhedral samples compared to the cubes at 320 °C. The implications of this difference are discussed with respect to the reaction mechanism, suggesting that a different mechanism dominates over the cubic catalysts to that for rodlike and polyhedral catalysts. The strong association between exposed surface facets of ceria to high methanol yields is an important consideration for future catalyst design in this area.

SUBMITTER: Smith LR

PROVIDER: S-EPMC8154328 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Soot Combustion over Nanostructured Ceria with Different Morphologies.

Project description:In this study, nano-structure ceria with three different morphologies (nanorod, nanoparticle and flake) have been prepared by hydrothermal and solvothermal methods. The ceria samples were deeply characterized by XRD, SEM, TEM, H2-TPR, XPS and in-situ DRIFTS, and tested for soot combustion in absence/presence NO atmospheres under loose and tight contact conditions. The prepared ceria samples exhibit excellent catalytic activities, especially, the CeO2 with nanorod (Ce-R) shows the best catalytic activity, for which the peak temperature of soot combustion (Tm) is about 500 and 368 °C in loose and tight contact conditions, respectively. The catalytic activity for Ce-R is higher than that of the reported CeO2 catalysts and reaches a level that of precious metals. The characterization results reveal that the maximal amounts of adsorbed oxygen species on the surface of the nanostructure Ce-R catalyst should be the crucial role to decide the catalytic soot performance. High BET surface area may also be a positive effect on soot oxidation activity under loose contact conditions.

| S-EPMC4926248 | biostudies-literature

Gas Phase Hydrogenation of Furaldehydes via Coupling with Alcohol Dehydrogenation over Ceria Supported Au-Cu.

Project description:We have investigated the synthesis and application of Au-Cu/CeO₂ (Cu: Au = 2) in the continuous gas phase (P = 1 atm; T = 498 K) coupled hydrogenation of 5-hydroxymethyl-2-furaldehyde (HMF) with 2-butanol dehydrogenation. STEM-EDX analysis revealed a close surface proximity of both metals in Au-Cu/CeO₂ post-TPR. XPS measurements suggest (support → metal) charge transfer to form Auδ- and strong metal-support interactions to generate Cu⁰ and Cu⁺. Au-Cu/CeO₂ promoted the sole formation of 2,5-dihydroxymethylfuran (DHMF) and 2-butanone in the HMF/2-butanol coupling with full hydrogen utilisation. Under the same reaction conditions, Au/CeO₂ was fully selective to DHMF in standard HMF hydrogenation (using an external hydrogen supply), but delivered a lower production rate and utilised less than 0.2% of the hydrogen supplied. Exclusive -C=O hydrogenation and -OH dehydrogenation is also demonstrated for the coupling of a series of m-substituted (-CH₃, -CH₂CH₃, -CH₂OH, -CF₃, -N(CH₃)₂, -H) furaldehydes with alcohol (1-propanol, 1-butanol, 2-propanol, 2-butanol, cyclohexanol) dehydrogenation over Au-Cu/CeO₂, consistent with a nucleophilic mechanism. In each case, we observed a greater hydrogenation rate and hydrogen utilisation efficiency with a 3⁻15 times lower E-factor in the coupling process relative to standard hydrogenation. Our results demonstrate the feasibility of using hydrogen generated in situ through alcohol dehydrogenation for the selective hydrogenation of m-furaldehydes with important industrial applications.

| S-EPMC6278317 | biostudies-literature

Catalytic Gas-Phase Glycerol Processing over SiO2-, Cu-, Ni- and Fe- Supported Au Nanoparticles.

Project description:In this study, we investigated different metal pairings of Au nanoparticles (NPs) as potential catalysts for glycerol dehydration for the first time. All of the systems preferred the formation of hydroxyacetone (HYNE). Although the bimetallics that were tested, i.e., Au NPs supported on Ni, Fe and Cu appeared to be more active than the Au/SiO2 system, only Cu supported Au NPs gave high conversion (ca. 63%) and selectivity (ca. 70%) to HYNE.

| S-EPMC4651318 | biostudies-literature

The formation of methanol from glycerol bio-waste over doped ceria-based catalysts.

Project description:A series of ceria-based solid solution metal oxides were prepared by co-precipitation and evaluated as catalysts for glycerol cleavage, principally to methanol. The catalyst activity and selectivity to methanol were investigated with respect to the reducibility of the catalysts. Oxides comprising Ce-Pr and Ce-Zr were prepared, calcined and compared to CeO2, Pr6O11 and ZrO2. The oxygen storage capacity of the catalysts was examined with analysis of Raman spectroscopic measurements and a temperature programmed reduction, oxidation and reduction cycle. The incorporation of Pr resulted in significant defects, as evidenced by Raman spectroscopy. The materials were evaluated as catalysts for the glycerol to methanol reaction, and it was found that an increased defect density or reducibility was beneficial. The space-time yield of methanol normalized to surface area over CeO2 was found to be 0.052 mmolMeOH m-2 h-1, and over CeZrO2 and CePrO2, this was to 0.029 and 0.076 mmolMeOH m-2 h-1, respectively. The inclusion of Pr reduced the surface area; however, the carbon mole selectivity to methanol and ethylene glycol remained relatively high, suggesting a shift in the reaction pathway compared to that over ceria. This article is part of a discussion meeting issue 'Science to enable the circular economy'.

| S-EPMC7422895 | biostudies-literature

Spotting plants' microfilament morphologies and nanostructures.

Project description:The tracheary system of plant leaves is composed of a cellulose skeleton with diverse hierarchical structures. It is built of polygonally bent helical microfilaments of cellulose-based nanostructures coated by different layers, which provide them high compression resistance, elasticity, and roughness. Their function includes the transport of water and nutrients from the roots to the leaves. Unveiling details about local interactions of tracheary elements with surrounding material, which varies between plants due to adaptation to different environments, is crucial for understanding ascending fluid transport and for tracheary mechanical strength relevant to potential applications. Here we show that plant tracheary microfilaments, collected from Agapanthus africanus and Ornithogalum thyrsoides leaves, have different surface morphologies, revealed by nematic liquid crystal droplets. This results in diverse interactions among microfilaments and with the environment; the differences translate to diverse mechanical properties of entangled microfilaments and their potential applications. The presented study also introduces routes for accurate characterization of plants' microfilaments.

| S-EPMC6613095 | biostudies-literature

Well-defined, multifunctional nanostructures of a paramagnetic lipid and a lipopeptide for macrophage imaging.

Project description:In the field of nanomedicine there is a great demand for technologies that allow the creation of self-assembled structures of which the size and morphology can be accurately controlled. In the current study, we report a nanoparticle platform that is composed of a paramagnetic lipid and a fluorescently labeled lipopeptide. By judiciously controlling the ratio of the aforementioned amphiphilic molecules, a variety of well-defined nanosized supramolecular structures with different sizes and morphologies could be created. The hydrodynamic radii of the different structures were determined by dynamic light scattering. Cryo-TEM revealed the aggregate morphology to vary from small micellar structures to plate-like and even full grown ribbons of which the aspect ratios varied from a diameter of 5-8 nm to structures with a width of up to 25 nm and infinite length. Interestingly, nuclear magnetic resonance dispersion profiling revealed excellent properties for MRI and also showed that the relaxivity of the structures was tunable and morphology dependent. Finally, macrophage cells were treated with two selected nanoparticles and were shown to be avidly taken up. In conclusion we demonstrate a methodology to create structures that (1) are paramagnetic to enable their detection with MRI, (2) exhibit fluorescent properties, (3) can be tuned to defined sizes and shapes, and (4) are efficiently taken up by macrophage cells in vitro.

| S-EPMC3305789 | biostudies-literature

Hierarchical Self-Assembly of a Water-Soluble Organoplatinum(II) Metallacycle into Well-Defined Nanostructures.

Project description:A water-soluble metallosupramolecular hexagon containing pendant methyl viologen (MV) and trimethylammonium units at the vertices has been synthesized via an organoplatinum(II) ? pyridyl coordination-driven self-assembly reaction. The MV units of the metallacycle were further utilized in the formation of a heteroternary complex with cucurbit[8]uril and a galactose-functionalized naphthalene derivative, yielding a metallacycle-cored carbohydrate cluster that was subsequently ordered into nanospheres and tapes, depending upon the concentration.

| S-EPMC6385591 | biostudies-literature

Gas phase dehydration of glycerol to acrolein over WO<sub>3</sub>-based catalysts prepared by non-hydrolytic sol-gel synthesis.

Project description:Solid acid catalysts based on WO3-SiO2 and WO3-ZrO2-SiO2 were prepared by one-pot non-hydrolytic sol-gel method and tested in the gas phase glycerol dehydration to acrolein. Their structural and textural characteristics were determined by X-ray diffraction (XRD), N2 adsorption, X-ray energy dispersive spectroscopy (XEDS), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). Their acid characteristics were studied by both temperature programmed desorption of ammonia (NH3-TPD) and FTIR of adsorbed pyridine. Under our operating conditions, all the catalysts were active and selective in the transformation of glycerol to acrolein, which was always the main reaction product. The high selectivity to acrolein is achieved on catalysts presenting a higher proportion of Brønsted acid sites. In addition, the role of oxygen in the feed on catalytic performance of these catalysts is also discussed.

| S-EPMC9079827 | biostudies-literature