Dataset Information

Biodegradation of bio-sourced and synthetic organic electronic materials towards green organic electronics.

ABSTRACT: Ubiquitous use of electronic devices has led to an unprecedented increase in related waste as well as the worldwide depletion of reserves of key chemical elements required in their manufacturing. The use of biodegradable and abundant organic (carbon-based) electronic materials can contribute to alleviate the environmental impact of the electronic industry. The pigment eumelanin is a bio-sourced candidate for environmentally benign (green) organic electronics. The biodegradation of eumelanin extracted from cuttlefish ink is studied both at 25 °C (mesophilic conditions) and 58 °C (thermophilic conditions) following ASTM D5338 and comparatively evaluated with the biodegradation of two synthetic organic electronic materials, namely copper (II) phthalocyanine (Cu-Pc) and polyphenylene sulfide (PPS). Eumelanin biodegradation reaches 4.1% (25 °C) in 97 days and 37% (58 °C) in 98 days, and residual material is found to be without phytotoxic effects. The two synthetic materials, Cu-Pc and PPS, do not biodegrade; Cu-Pc brings about the inhibition of microbial respiration in the compost. PPS appears to be potentially phytotoxic. Finally, some considerations regarding the biodegradation test as well as the disambiguation of "biodegradability" and "bioresorbability" are highlighted.

SUBMITTER: Di Mauro E

PROVIDER: S-EPMC8154894 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Printed circuit boards (PCBs) physically support and connect electronic components to the implementation of complex circuits. The most widespread insulating substrate that also acts as a mechanical support in PCBs is commercially known as FR4, and it is a glass-fiber-reinforced epoxy resin laminate. FR4 has exceptional dielectric, mechanical, and thermal properties. However, it was designed without considering sustainability and end-of-life aspects, heavily contributing to the accumulation of electronic waste in the environment. Thus, greener alternatives that can be reprocessed, reused, biodegraded, or composted at the end of their function are needed. This work presents the development and characterization of a PCB substrate based on poly(lactic acid) and cotton fabric, a compostable alternative to the conventional FR4. The substrate has been developed by compression molding, a process compatible with the polymer industry. We demonstrate that conductive silver ink can be additively printed on the substrate's surface, as its morphology and wettability are similar to those of FR4. For example, the compostable PCB's water contact angle is 72°, close to FR4's contact angle of 64°. The developed substrate can be thermoformed to curved surfaces at low temperatures while preserving the conductivity of the silver tracks. The green substrate has a dielectric constant comparable to that of the standard FR4, showing a value of 5.6 and 4.6 at 10 and 100 kHz, respectively, which is close to the constant value of 4.6 of FR4. The substrate is suitable for microdrilling, a fundamental process for integrating electronic components to the PCB. We implemented a proof-of-principle circuit to control the blinking of LEDs on top of the PCB, comprising resistors, capacitors, LEDs, and a dual in-line package circuit timer. The developed PCB substrate represents a sustainable alternative to standard FR4 and could contribute to the reduction of the overwhelming load of electronic waste in landfills.

Project description:Decomposed organic materials, in combination with plant growth-promoting bacteria (PGPB), are environmentally friendly and reduce synthetic fertilizer use in rice production. A bio-organic fertilizer (BoF) was prepared using kitchen waste (79%), chita-dhan (unfilled rice grain) biochar (15%), rock phosphate (5%), and a consortium of 10 PGPB (1%) to supplement 30% nitrogen and to replace triple superphosphate (TSP) fertilizer in rice production with an improvement of soil health. PGPB were local isolates and identified using 16S ribosomal RNA partial gene sequences as Bacillus mycoides, Proteus sp., Bacillus cereus, Bacillus subtilis, Bacillus pumilus, Paenibacillus polymyxa, and Paenibacillus spp. Isolates could fix N2 by 0.7-1.4 g kg-1, solubilize 0.1-1.2 g kg-1 phosphate, and produce 0.1-40 g kg-1 indoleacetic acid. The performance of BoF was evaluated by 16 field experiments and 18 farmers' field demonstration trials during the year 2017-2020 in different parts of Bangladesh. Performances of BoF were evaluated based on control (T1), full synthetic fertilizer dose of N, P, and K (T2), BoF (2 t ha-1) + 70% N as urea + 100% K as muriate of potash (T3), 70% N as urea + 100% P as TSP + 100% K as muriate of potash (T4), and 2 t ha-1 BoF (T5) treatments. At the research station, average grain yield improved by 10-13% in T3 compared with T2 treatment. Depending on seasons, higher agronomic N use efficiency (19-30%), physiological N use efficiency (8-18%), partial factor productivity (PFP)N (114-150%), recovery efficiency (RE)N (3-31%), N harvest index (HIN) (14-24%), agronomic P use efficiency (22-25%), partial factor productivity of P (9-12%), AREP (15-23%), and HIP (3-6%) were obtained in T3 compared with T2 treatment. Research results were reflected in farmers' field, and significant (P < 0.05) higher plant height, tiller, panicle, grain yield, partial factor productivity of N and P were obtained in the same treatment. Application of BoF improved soil organic carbon by 6-13%, along with an increased number of PGPB as compared with full synthetic fertilizer dose. In conclusion, tested BoF can be considered as a green technology to reduce 30% synthetic N and 100% TSP requirements in rice production with improved soil health.

Dataset Information

Biodegradation of bio-sourced and synthetic organic electronic materials towards green organic electronics.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets