Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Ultrapermeable Composite Membranes Enhanced Via Doping with Amorphous MOF Nanosheets.

ABSTRACT: Thin-film composite (TFC) polymeric membranes have attracted increasing interest to meet the demands of industrial gas separation. However, the development of high-performance TFC membranes within their current configuration faces two key challenges: (i) the thickness-dependent gas permeability of polymeric materials (mainly poly(dimethylsiloxane) (PDMS)) and (ii) the geometric restriction effect due to the limited pore accessibility of the underlying porous substrate. Here we demonstrate that the incorporation of trace amounts (∼1.8 wt %) of amorphous metal-organic framework (MOF) nanosheets into the gutter layer of TFC assemblies can simultaneously address these two limitations by the creation of rapid, transmembrane gas diffusion pathways. The resultant PDMS&MOF membrane displayed excellent CO₂ permeance of 10450 GPU and CO₂/N₂ selectivity of 9.1. Leveraging this strategy, we successfully fabricate a novel TFC membrane, consisting of a PDMS&MOF gutter and an ultrathin (∼54 nm) poly(ethylene glycol) top selective layer via surface-initiated atom transfer radical polymerization. The complete TFC membrane exhibits excellent processability and remarkable CO₂/N₂ separation performance (1990 GPU with a CO₂/N₂ ideal selectivity of 39). This study reveals a strategy for the design and fabrication of a new TFC membrane system with unprecedented gas-separation performance.

SUBMITTER: Liu M

PROVIDER: S-EPMC8155479 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Micropatterned Ultrathin MOF Membranes with Enhanced Molecular Sieving Property.

Project description:Metal-organic frameworks (MOFs) are attractive crystalline materials for membranes due to their diverse crystalline pore structures and molecular separation properties. However, the fabrication cost is relatively high compared to conventional polymeric membranes. The concern of the cost could be eased if they are part of a value-added device, for example, as the key separation unit in a lab-on-a-chip device. This study demonstrates the feasibility of miniaturization of MOF membranes by patterning the membrane surface, a necessary step for MOF membranes to be used in compact devices. Water-stable ultrathin UiO-66 membranes with a thickness down to 250 nm on a substrate with a complex pattern were grown. The patterned membranes showed a 100 % improvement in the apparent permeation flux over conventional flat-UiO-66 membranes without compromising the molecular separation property, indicating the complexity of a surface would not be a formidable obstacle to the MOF membrane fabrication.

| S-EPMC6334230 | biostudies-literature

A Straightforward Method to Prepare MOF-Based Membranes via Direct Seeding of MOF-Polymer Hybrid Nanoparticles.

Project description:Metal Organic Frameworks (MOFs) present high surface areas, various pore topology as well as good stabilities. The functionalities and porosity can be tuned by using different linkers with various functional groups and a wide range of linker lengths. These properties make them good candidates in membrane separation applications. In this work, we propose a simple UiO-66 MOF-based membrane fabrication method following two steps. First, the α-alumina tubular membrane support was dip-coated with MOF-polymer hybrid nanoparticles (NPs). These NPs were prepared via one-pot synthesis by adding poly (methacrylic acid)-b-poly (methyl methacrylate) (PMAA-b-PMMA) NPs to the classical acetic acid-modulated UiO-66 or UiO-66-NH2 synthesis formulation. Second, secondary membrane growth was applied to give rise to a continuous and homogeneous crystalline MOF membrane layer. The gas permeances (He, N2, CO2 and SF6) tests confirmed high membrane permeability with no macro-defects. The as-prepared membranes that were used for dye separation (Rhodamine B) showed relatively good separation capacity.

| S-EPMC9864354 | biostudies-literature

Oriented MOF-polymer composite nanofiber membranes for high proton conductivity at high temperature and anhydrous condition.

Project description:The novel oriented electrospun nanofiber membrane composed of MOFs and SPPESK has been synthesized for proton exchange membrane fuel cell operating at high temperature and anhydrous conditions. It is clear that the oriented nanofiber membrane displays the higher proton conductivity than that of the disordered nanofiber membrane or the membrane prepared by conventional solvent-casting method (without nanofibers). Nanofibers within the membranes are significantly oriented. The proton conductivity of the oriented nanofiber membrane can reach up to (8.2 ± 0.16) × 10(-2) S cm(-1) at 160°C under anhydrous condition for the highly orientation of nanofibers. Moreover, the oxidative stability and resistance of methanol permeability of the nanofibers membrane are obviously improved with an increase in orientation of nanofibers. The observed methanol permeability of 0.707 × 10(-7) cm(2) s(-1) is about 6% of Nafion-115. Consequently, orientated nanofibers membrane is proved to be a promising material as the proton exchange membrane for potential application in direct methanol fuel cells.

| S-EPMC4118289 | biostudies-literature

Tuning the Chemical Hardness of Boron Nitride Nanosheets by Doping Carbon for Enhanced Adsorption Capacity.

Project description:The chemical hardness of adsorbents is an important physicochemical property in the process of adsorption based on the hard and soft acids and bases (HSAB) theory. Tuning chemical hardness of adsorbents modulated by their concomitants is a promising approach to enhance the adsorptive capacity in principle. In the present work, we report an efficient strategy that the adsorption capacity for aromatic sulfocompounds can be enhanced by tuning the chemical hardness. This strategy is first theoretically explored by introducing C element into the network of hexagonal boron nitride (h-BN) based on a series of model materials (model_xC, x = 1-5). Computational results show that the chemical hardness is reduced after gradually C-doping, which may lead to an enhancement of adsorption capacity according to the HSAB theory. Then, a series of C-doped h-BN materials (BCN-x, x = 10-50) were controlled synthesized. All of the as-prepared materials show better adsorption capacities (e.g., 27.43 mg g-1 for BCN-50) than pure h-BN. Experiment results show that the adsorption capacity correlates well with the C content in the BCN-x, which is consistent with the results predicted by theoretical calculation. This strategy may be helpful to rationally design highly efficient adsorbents in separation engineering and may be expanded to similar two-dimensional materials, where the π-π interaction is the dominant driven force.

| S-EPMC6644707 | biostudies-literature

Highly Permeable Sulfonated Graphene-Based Composite Membranes for Electrochemically Enhanced Nanofiltration.

Project description:A sulfophenyl-functionalized reduced graphene oxide (SrGO) membrane is prepared. The SrGO membranes have a high charge density in water and could provide many atomically smooth nanochannels, because of their strong ionized-SO3H groups and low oxygen content. Therefore, the SrGO membranes have an excellent performance in terms of high permeance and high rejection ability. The permeance of SrGO membranes could be up to 118.2 L m-2 h-1 bar-1, which is 7.6 times higher than that of GO membrane (15.5 L m-2 h-1 bar-1). Benefiting from their good electrical conductivity, the SrGO membranes could also function as an electrode and demonstrate a significantly increased rejection toward negatively charged molecules and positively charged heavy metal ions such as Cu2+, Cr3+ and Cd2+, if given an appropriate negative potential. The rejection ratios of these metal ions can be increased from <20% at 0 V to >99% at 2.0 V. This is attributed to the enhanced electrostatic repulsion between the SrGO membrane and the like-charged molecules, and the increased electrostatic adsorption and electrochemical reduction in these heavy metal ions on the membranes. This study is expected to contribute to efficient water treatment and the advance of graphene-based membranes.

| S-EPMC9370331 | biostudies-literature

Fluorine Doping of Microporous Organosilica Membranes for Pore Size Control and Enhanced Hydrophobic Properties.

Project description:Fluorine-doped organosilica membranes for gas and pervaporation (PV) separation were fabricated using a sol-gel method. NH4F and bis(triethoxysilyl)methane (BTESM) were selected as the dopant and Si precursor, respectively, for the fabrication of fluorine-doped organosilica membranes. Doping with fluorine was evaluated for its effect on the physicochemical properties of organosilica (hydrophobicity/hydrophilicity and network size). Fluorine doping dramatically eliminated the formation of Si-OH groups in the sol, so that the condensation of Si-OH groups during the calcination process was suppressed. It is possible that fluorine doping enlarged the network pore sizes in organosilica, because the F-BTESM (F/Si = 1/9) membrane showed superior He and H2 permeance with a low H2/N2 permeance ratio that corresponded to the network pore size by comparison with an undoped BTESM membrane. The F-BTESM (F/Si = 1/9) membranes clearly showed a high level of C3H6 permeance (>3.0 × 10-7 mol m-2 s-1 Pa-1) with a high C3H6/SF6 permeance ratio (?250), which suggests that the network pore size of F-BTESM is suitable for the separation of large molecules such as hydrocarbon gases (C3/C4, C4 isomer, etc.). Organosilica membranes both with and without fluorine doping showed stable PV performance because of the fact that H2O permeance and each permeance ratio under different separation systems was approximately constant over 10 h at 70 °C. Fluorine doping enhanced the hydrophobic nature of the organosilica, which was confirmed by the H2O adsorption and PV properties.

| S-EPMC6644774 | biostudies-literature

Shear-aligned graphene oxide nanosheets incorporated PVDF composite membranes for selective dye rejection with high water flux.

Project description:Membrane technology is crucial in addressing water pollution challenges, particularly in removing dyes from wastewater. This study presents a novel approach to fabricating shear-aligned graphene oxide (GO) nanosheets incorporated polyvinylidene fluoride (PVDF) membranes for achieving exceptional dye rejection efficiency while maintaining high water flux. The membranes were prepared by dispersing graphene oxide within a PVDF matrix and subsequent subjection to shear alignment techniques. Shear and flow-induced alignment were explored to achieve precise and controlled alignment of graphene oxide flakes within the PVDF matrix. The resulting membranes exhibited enhanced structural integrity and optimized molecular packing of PVDF and GO, enabling them to selectively reject dyes while allowing efficient water permeation. The fabricated membranes were extensively characterized using appropriate testing methods. The results demonstrated that the shear-aligned GO sheets infused PVDF composite membranes exhibited outstanding dye rejection (96-99%) performance, surpassing conventional membranes while maintaining high water flux. This innovative membrane fabrication approach holds significant promise for advanced water treatment applications, offering a sustainable solution for selective dye removal and efficient water purification.

| S-EPMC11367625 | biostudies-literature

Molecular Simulations of MOF Membranes and Performance Predictions of MOF/Polymer Mixed Matrix Membranes for CO2/CH4 Separations.

Project description:Efficient separation of CO2 from CO2/CH4 mixtures using membranes has economic, environmental and industrial importance. Membrane technologies are currently dominated by polymers due to their processing abilities and low manufacturing costs. However, polymeric membranes suffer from either low gas permeabilities or low selectivities. Metal organic frameworks (MOFs) are suggested as potential membrane candidates that offer both high selectivity and permeability for CO2/CH4 separation. Experimental testing of every single synthesized MOF material as membranes is not practical due to the availability of thousands of different MOF materials. A multilevel, high-throughput computational screening methodology was used to examine the MOF database for membrane-based CO2/CH4 separation. MOF membranes offering the best combination of CO2 permeability (>106 Barrer) and CO2/CH4 selectivity (>80) were identified by combining grand canonical Monte Carlo and molecular dynamics simulations. Results revealed that the best MOF membranes are located above the Robeson's upper bound indicating that they outperform polymeric membranes for CO2/CH4 separation. The impact of framework flexibility on the membrane properties of the selected top MOFs was studied by comparing the results of rigid and flexible molecular simulations. Relations between structures and performances of MOFs were also investigated to provide atomic-level insights into the design of novel MOFs which will be useful for CO2/CH4 separation processes. We also predicted permeabilities and selectivities of the mixed matrix membranes (MMM) in which the best MOF candidates are incorporated as filler particles into polymers and found that MOF-based MMMs have significantly higher CO2 permeabilities and moderately higher selectivities than pure polymers.

| S-EPMC6344032 | biostudies-literature

Surfactant-Assisted Fabrication of Alumina-Doped Amorphous Silica Nanofiltration Membranes with Enhanced Water Purification Performances.

Project description:Surfactant-templated 5 mol% Al2O3-doped silica membranes nanofiltration membranes were synthesized via the sol-gel method, and afterward, were optimized, and tested with respect to the permeability and rejection rate. The disordered silica network was stabilized by doping 5 mol% alumina. Tetraethyl orthosilicate and aluminum isopropoxide were used as the silica and alumina precursors, respectively. Cetyltrimethylammonium bromide (CTAB) was used not only as a pore-forming agent, but also to control the reaction rate of the aluminum isopropoxide, thus obtaining highly homogeneous materials. The results about filtration of model solutions showed that the optimized membranes are featured by both a relatively high water permeability (1.1-2.3 L·m-2·h-1 ·bar-1) and a high rejection for salts (74% for NaCl, and >95% for MgSO4 and Na2SO4) and organic pollutants (e.g., about 98% for caffeine). High rejection of divalent ions and organic molecules was also observed when a real wastewater effluent was filtered. The influence of the synthesis conditions on the membrane performance is discussed.

| S-EPMC6836250 | biostudies-literature

Enhanced optical absorption via cation doping hybrid lead iodine perovskites.

Project description:The suitable band structure is vital for perovskite solar cells, which greatly affect the high photoelectric conversion efficiency. Cation substitution is an effective approach to tune the electric structure, carrier concentration, and optical absorption of hybrid lead iodine perovskites. In this work, the electronic structures and optical properties of cation (Bi, Sn, and TI) doped tetragonal formamidinium lead iodine CH(NH2)2PbI3 (FAPbI3) are studied by first-principles calculations. For comparison, the cation-doped tetragonal methylammonium lead iodine CH3NH3PbI3 (MAPbI3) are also considered. The calculated formation energies reveal that the Sn atom is easier to dope in the tetragonal MAPbI3/FAPbI3 structure due to the small formation energy of about 0.3 eV. Besides, the band gap of Sn-doped MAPbI3/FAPbI3 is 1.30/1.40 eV, which is considerably smaller than the un-doped tetragonal MAPbI3/FAPbI3. More importantly, compare with the un-doped tetragonal MAPbI3/FAPbI3, the Sn-doped MAPbI3 and FAPbI3 have the larger optical absorption coefficient and theoretical maximum efficiency, especially for Sn-doped FAPbI3. The lower formation energy, suitable band gap and outstanding optical absorption of the Sn-doped FAPbI3 make it promising candidates for high-efficient perovskite cells.

| S-EPMC5552798 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data