Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Nanosponge-Based Composite Gel Polymer Electrolyte for Safer Li-O₂ Batteries.

ABSTRACT: Li-O₂ batteries represent a promising rechargeable battery candidate to answer the energy challenges our world is facing, thanks to their ultrahigh theoretical energy density. However, the poor cycling stability of the Li-O₂ system and, overall, important safety issues due to the formation of Li dendrites, combined with the use of organic liquid electrolytes and O₂ cross-over, inhibit their practical applications. As a solution to these various issues, we propose a composite gel polymer electrolyte consisting of a highly cross-linked polymer matrix, containing a dextrin-based nanosponge and activated with a liquid electrolyte. The polymer matrix, easily obtained by thermally activated one pot free radical polymerization in bulk, allows to limit dendrite nucleation and growth thanks to its cross-linked structure. At the same time, the nanosponge limits the O₂ cross-over and avoids the formation of crystalline domains in the polymer matrix, which, combined with the liquid electrolyte, allows a good ionic conductivity at room temperature. Such a composite gel polymer electrolyte, tested in a cell containing Li metal as anode and a simple commercial gas diffusion layer, without any catalyst, as cathode demonstrates a full capacity of 5.05 mAh cm^-2 as well as improved reversibility upon cycling, compared to a cell containing liquid electrolyte.

SUBMITTER: Amici J

PROVIDER: S-EPMC8156716 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A structured three-dimensional polymer electrolyte with enlarged active reaction zone for Li-O2 batteries.

Project description:The application of conventional solid polymer electrolyte (SPE) to lithium-oxygen (Li-O2) batteries has suffered from a limited active reaction zone due to thick SPE and subsequent lack of O2 gas diffusion route in the positive electrode. Here we present a new design for a three-dimensional (3-D) SPE structure, incorporating a carbon nanotube (CNT) electrode, adapted for a gas-based energy storage system. The void spaces in the porous CNT/SPE film allow an increased depth of diffusion of O2 gas, providing an enlarged active reaction zone where Li(+) ions, O2 gas, and electrons can interact. Furthermore, the thin SPE layer along the CNT, forming the core/shell nanostructure, aids in the smooth electron transfer when O2 gas approaches the CNT surface. Therefore, the 3-D CNT/SPE electrode structure enhances the capacity in the SPE-based Li-O2 cell. However, intrinsic instability of poly(ethylene oxide) (PEO) of the SPE matrix to superoxide (O2(·-)) and high voltage gives rise to severe side reactions, convincing us of the need for development of a more stable electrolyte for use in this CNT/SPE design.

| S-EPMC4237987 | biostudies-literature

Cross-linked Composite Gel Polymer Electrolyte using Mesoporous Methacrylate-Functionalized SiO2 Nanoparticles for Lithium-Ion Polymer Batteries.

Project description:Liquid electrolytes composed of lithium salt in a mixture of organic solvents have been widely used for lithium-ion batteries. However, the high flammability of the organic solvents can lead to thermal runaway and explosions if the system is accidentally subjected to a short circuit or experiences local overheating. In this work, a cross-linked composite gel polymer electrolyte was prepared and applied to lithium-ion polymer cells as a safer and more reliable electrolyte. Mesoporous SiO2 nanoparticles containing reactive methacrylate groups as cross-linking sites were synthesized and dispersed into the fibrous polyacrylonitrile membrane. They directly reacted with gel electrolyte precursors containing tri(ethylene glycol) diacrylate, resulting in the formation of a cross-linked composite gel polymer electrolyte with high ionic conductivity and favorable interfacial characteristics. The mesoporous SiO2 particles also served as HF scavengers to reduce the HF content in the electrolyte at high temperature. As a result, the cycling performance of the lithium-ion polymer cells with cross-linked composite gel polymer electrolytes employing methacrylate-functionalized mesoporous SiO2 nanoparticles was remarkably improved at elevated temperatures.

| S-EPMC4870681 | biostudies-literature

Synergy of Sulfur/Polyacrylonitrile Composite and Gel Polymer Electrolyte Promises Heat-Resistant Lithium-Sulfur Batteries.

Project description:Lithium-sulfur (Li-S) batteries with high theoretical energy density attract great research attention. Although tremendous efforts have been made, heat tolerance capability of Li-S batteries is a topic rarely touched, although it is essential for practical application. At high temperatures, the dissolution of the polysulfides is aggravated, and the safety issue becomes severe. Herein, by using sulfur/polyacrylonitrile (SPAN) composites as positive electrode materials and a gel polymer membrane with carbonate electrolyte, we successfully realized a Li-S battery with remarkable heat-resistant performance at 50°C and 60°C. The SPAN-positive materials allow the Li-S battery operated in safer carbonate-containing electrolyte. The gel polymer electrolyte enhances the charge transfer, maintains the morphology of Li metal during cycling, and suppresses the migration of the soluble polysulfides, which is also observed when SPAN is used as positive electrode material. This contribution would bring new opportunity to extend the application of lithium batteries at high temperatures.

| S-EPMC6700433 | biostudies-literature

Addressing Manufacturability and Processability in Polymer Gel Electrolytes for Li/Na Batteries.

Project description:Gel electrolytes are prepared with Ultra High Molecular Weight (UHMW) polyethylene oxide (PEO) in a concentration ranging from 5 to 30 wt.% and Li- and Na-doped 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (PYR14-TFSI) by a simple procedure consisting of dissolving PEO by melting it directly in the liquid electrolyte while stirring the blend. This procedure is fast, reproducible and needs no auxiliary solvents, which makes it sustainable and potentially easy to scale up for mass production. The viability of the up-scaling by extrusion has been studied. Extrusion has been chosen because it is a processing method commonly employed in the plastics industry. The structure and morphology of the gel electrolytes prepared by both methods have been studied by DSC and FTIR, showing small differences among the two methods. Composite gels incorporation high concentrations of surface modified sepiolite fibers have been successfully prepared by extrusion. The rheological behavior and ionic conductivity of the gels have been characterized, and very similar performance of the extruded and manually mixed gels is detected. Ionic conductivity of all the gels, including the composites, are at or over 0.4 mS cm-1 at 25 °C, being at the same time thermoreversible and self-healing gels, tough, sticky, transparent and stretchable. This combination of properties, together with the viability of their industrial up-scaling, makes these gel electrolyte families very attractive for their application in energy storage devices.

| S-EPMC8271759 | biostudies-literature

A Heavily Surface-Doped Polymer with the Bifunctional Catalytic Mechanism in Li-O2 Batteries.

Project description:The application of conducting polymers (CPs) in energy storage systems is greatly limited by insufficient reversibility and stability. Here, we successfully incorporated functionalized dopants (Fe(CN)63- [FCN] and PO43- ions) in CPs matrixes to achieve a preferable electrochemical performance. A stable cation inserting/expulsing behavior of surface-doped polycarbazole (PCz) is demonstrated in our work, where doping levels and semiconductor properties of PCz are effectively controlled to adjust their redox properties and stability. With carbon nanotube (CNT) films as the substrate, the CNT/PCz:FCN composite is initially adopted as a free-standing catalytic electrode in Li-O2 cells. The molecule-level dispersed FCN dopants on the surface can work as bifunctional redox mediators on the charge-discharge process. Thus, this composite can not only achieve a low charge plateau of 3.62 V and a regular growth of capacities from 1,800 to 4,800 mAh/gCNT, but also maintain the most of charge voltages under 4.0 V for 150 cycles.

| S-EPMC6489138 | biostudies-literature

Lignin-Based Gel Polymer Electrolyte for Cationic Conductivity.

Project description:The article presents the results of the preparation and study of a gel-polymer electrolyte based on lignin obtained from Pinus sylvestris. Sulfonation and subsequent chlorination of lignin make possible implementation of the principle of mono-ionic conductivity in a natural biopolymer matrix, which provides predominantly cationic conductivity of the electrolyte. Based on the results of the qualitative and quantitative analysis of the synthesized samples, the mechanisms of the chemical conversion of the biopolymer, the structure models of the converted fragments of macromolecules, as well as the quantum-chemical calculation of their electronic and geometric parameters are presented. The key electronic characteristics of the gel polymer electrolytes (GPE) based on a composite of lignins with 20 wt.% polyvinyl alcohol are determined by impedance spectroscopy. The maximum value of the specific volume conductivity is 2.48 × 10-4 S cm-1, which is comparable with most commercial electrolytes of this type, but at the same time, record values are reached in the number of lithium cation transfer tLi+ of 0.89. The studies allow to identify the basic laws of the effect of chemical modification on the structure of GPE and describe the mechanism of ionic conductivity.

| S-EPMC8309217 | biostudies-literature

Toward garnet electrolyte-based Li metal batteries: An ultrathin, highly effective, artificial solid-state electrolyte/metallic Li interface.

Project description:Solid-state batteries are a promising option toward high energy and power densities due to the use of lithium (Li) metal as an anode. Among all solid electrolyte materials ranging from sulfides to oxides and oxynitrides, cubic garnet-type Li7La3Zr2O12 (LLZO) ceramic electrolytes are superior candidates because of their high ionic conductivity (10-3 to 10-4 S/cm) and good stability against Li metal. However, garnet solid electrolytes generally have poor contact with Li metal, which causes high resistance and uneven current distribution at the interface. To address this challenge, we demonstrate a strategy to engineer the garnet solid electrolyte and the Li metal interface by forming an intermediary Li-metal alloy, which changes the wettability of the garnet surface (lithiophobic to lithiophilic) and reduces the interface resistance by more than an order of magnitude: 950 ohm·cm2 for the pristine garnet/Li and 75 ohm·cm2 for the surface-engineered garnet/Li. Li7La2.75Ca0.25Zr1.75Nb0.25O12 (LLCZN) was selected as the solid-state electrolyte (SSE) in this work because of its low sintering temperature, stabilized cubic garnet phase, and high ionic conductivity. This low area-specific resistance enables a solid-state garnet SSE/Li metal configuration and promotes the development of a hybrid electrolyte system. The hybrid system uses the improved solid-state garnet SSE Li metal anode and a thin liquid electrolyte cathode interfacial layer. This work provides new ways to address the garnet SSE wetting issue against Li and get more stable cell performances based on the hybrid electrolyte system for Li-ion, Li-sulfur, and Li-oxygen batteries toward the next generation of Li metal batteries.

| S-EPMC5384807 | biostudies-literature

Fabrication of UV-Crosslinked Flexible Solid Polymer Electrolyte with PDMS for Li-Ion Batteries.

Project description:Conventional carbonate-based liquid electrolytes have safety issues related to their high flammability and easy leakage. Therefore, it is essential to develop alternative electrolytes for lithium-ion batteries (LIBs). As a potential candidate, solid-polymer electrolytes (SPEs) offer enhanced safety characteristics, while to be widely applied their performance still has to be improved. Here, we have prepared a series of UV-photocrosslinked flexible SPEs comprising poly(ethylene glycol) diacrylate (PEGDA), trimethylolpropane ethoxylate triacrylate (ETPTA), and lithium bis(trifluoromethane sulfonyl)imide (LiTFSI) salt, with the addition of polydimethylsiloxane with acrylated terminal groups (acryl-PDMS) to diminish the crystallinity of the poly(ethylene glycol) chain. Polysiloxanes have gained interest for the fabrication of SPEs due to their unique features, such as decrement of glass transition temperature (Tg), and the ability to improve flexibility and facilitate lithium-ion transport. Freestanding, transparent SPEs with excellent flexibility and mechanical properties were achieved without any supporting backbone, despite the high content of lithium salt, which was enabled by their networked structure, the presence of polar functional groups, and their amorphous structure. The highest ionic conductivity for the developed cross-linked SPEs was 1.75 × 10-6 S cm-1 at room temperature and 1.07 × 10-4 S cm-1 at 80 °C. The SPEs demonstrated stable Li plating/stripping ability and excellent compatibility toward metallic lithium, and exhibited high electrochemical stability in a wide range of potentials, which enables application in high-voltage lithium-ion batteries.

| S-EPMC7793537 | biostudies-literature

Honeycomb-like porous gel polymer electrolyte membrane for lithium ion batteries with enhanced safety.

Project description:Lithium ion batteries have shown great potential in applications as power sources for electric vehicles and large-scale energy storage. However, the direct uses of flammable organic liquid electrolyte with commercial separator induce serious safety problems including the risk of fire and explosion. Herein, we report the development of poly(vinylidene difluoride-co-hexafluoropropylene) polymer membranes with multi-sized honeycomb-like porous architectures. The as-prepared polymer electrolyte membranes contain porosity as high as 78%, which leads to the high electrolyte uptake of 86.2 wt%. The PVDF-HFP gel polymer electrolyte membranes exhibited a high ionic conductivity of 1.03 mS cm(-1) at room temperature, which is much higher than that of commercial polymer membranes. Moreover, the as-obtained gel polymer membranes are also thermally stable up to 350 °C and non-combustible in fire (fire-proof). When applied in lithium ion batteries with LiFePO4 as cathode materials, the gel polymer electrolyte demonstrated excellent electrochemical performances. This investigation indicates that PVDF-HFP gel polymer membranes could be potentially applicable for high power lithium ion batteries with the features of high safety, low cost and good performance.

| S-EPMC4148667 | biostudies-literature

A Bifunctional Fluorophosphate Electrolyte for Safer Sodium-Ion Batteries.

Project description:Most of the currently developed sodium-ion batteries (SIBs) have potential safety hazards due to the use of highly volatile and flammable alkyl carbonate electrolytes. To overcome this challenge, we report an electrochemically compatible and nonflammable electrolyte, tris(2,2,2-trifluoroethyl) phosphate (TFEP) with low-concentration sodium bis(fluorosulfonyl)imide (0.9 M), which is designed not only to match perfectly with the hard carbon (HC) anode but also to enhance the thermal stability of SIBs. Experimental results and theoretical calculations reveal that TFEP molecules have a significantly low barrier to decompose before Na+ inserts into HC, forming a stable inorganic solid-electrolyte interface layer, thus improving the electrochemical and structural stabilities of HC anodes. An HC/Na3V2(PO4)3 full cell using TFEP electrolyte shows a high capacity retention of 89.2% after 300 cycles and a dramatically reduced exothermic heat at elevated temperature, implying its potential application for safe and low-cost larger-scale energy storage.

| S-EPMC6279964 | biostudies-literature