Aluminium release and fluid warming: provocational setting and devices at risk.
Ontology highlight
ABSTRACT: Background
Fluid warming, recommended for fluid rates of > 500 ml h-1, is an integral part of patient temperature management strategies. Fluid warming devices using an uncoated aluminium containing heating element have been reported to liberate aluminium resulting in critical aluminium concentrations in heated fluids. We investigated saline solution (0.9%), artificially spiked with organic acids to determine the influence of fluid composition on aluminium release using the uncoated enFlow® device. Additionally, the Level1® as a high volume fluid warming device and the ThermoSens® device were investigated with artificial spiked fluid at high risk for aluminum release and a clinically used crystalloid solution.Results
Saline solution spiked with lactate more than acetate, especially at a non neutral pH, led to high aluminium release. Next to the enFlow® device, aluminium release was observed for the Level1® device, but not for the coated ThermoSens®-device.Conclusion
Uncoated aluminium containing fluid warming devices lead to potentially toxic levels of aluminium in heated fluids, especially in fluids with non-neutral pH containing organic acids and their salts like balanced electrolyte solutions.
SUBMITTER: Perl T
PROVIDER: S-EPMC8157702 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:In order to investigate the release of aluminium ions from food contact materials, three different types of uncoated aluminium menu trays for single use were tested with the foodstuffs sauerkraut juice, apple sauce and tomato puree, as well as with the food simulants 5 g/L citric acid solution and artificial tap water. To mimic a consumer relevant exposure scenario, the aluminium trays were studied using time and temperature gradients according to the Cook & Chill method, also taking into account storage time at elevated temperatures during the delivery period. The release of aluminium was found to exceed the specific release limit (SRL) of 5 mg aluminium per kilogram of food specified by the Council of Europe by up to six times. Furthermore, a release of thallium was also detected unexpectedly. Kinetic studies showed a comparable behaviour in the release of aluminium, manganese and vanadium as components of the aluminium alloy itself. In contrast, thallium could be identified as a surface contaminant or impurity because of an entirely different kinetic curve. Kinetic studies also allowed activation energy calculations. Additional camping saucepans were tested as an article for repeated use. In three subsequent release experiments with citric acid (5 g/L), artificial tap water and tomato puree as benchmark foodstuffs, the results were comparable to those of the uncoated wrought alloy aluminium trays.
| S-EPMC6056035 | biostudies-literature
Project description:BackgroundAccidental intraoperative hypothermia is a common and avoidable adverse event of the perioperative period and is associated with detrimental effects on multiple organ systems and postoperative patient outcomes. In a resource-limited environment, prevention of intraoperative hypothermia is often challenging. Resourceful clinicians overcome these challenges through creative devices and frugal innovations.ObjectivesTo investigate the thermal performance of two Baragwanath Rewarming Appliances (BaRA) against that of the Hotline device to describe an optimal setup for these devices.MethodsThis was a quasi-experimental laboratory study that measured the thermal performance of two BaRA devices and the Hotline device under a number of scenarios. Independent variables including fluid type, flow rate, warming temperature and warming transit distance were sequentially altered and temperatures measured along the fluid stream. Change in temperature (ΔT) was calculated as the difference between entry and exit temperature for each combination of variables for each warming device.ResultsA total of 219 experiments were performed. At a temperature of 43.0°C and a transit distance of 200 cm, the BaRA A configuration either matched or exceeded the ΔT of the Hotline over all fluid type and flowrate combinations. The BaRA B configuration does not provide comparable thermal performance to the Hotline. Measured flowrates were noticeably slower than manufacturer-quoted values for all intravenous (IV) cannulae used.ConclusionA warm-water bath at 43.0°C with 200 cm of submerged IV tubing provides thermal performance comparable to the Hotline device, with all fluid type and flowrate combinations.Contributions of the studyThe present study provides an evidence-based method for warming intravenous fluid in resource-limited scenarios.
| S-EPMC10016232 | biostudies-literature
Project description:Microfluidics research for various applications, including drug delivery, cell-based assays and biomedical research has grown exponentially. Despite this technology's enormous potential, drawbacks include the need for multistep fabrication, typically with lithography. We present a one-step fabrication process of a microfluidic chip for drug dissolution assays based on a 3D printing technology. Doxorubicin porous and non-porous microspheres, with a mean diameter of 250µm, were fabricated using a conventional "batch" or microfluidic method, based on an optimized solid-in-oil-in-water protocol. Microspheres fabricated with microfluidics system exhibited higher encapsulation efficiency and drug content as compared with batch formulations. We determined drug release profiles of microspheres in varying pH conditions using two distinct dissolution devices that differed in their mechanical barrier structures. The release profile of the "V" shape barrier was similar to that of the dialysis sac test and differed from the "basket" barrier design. Importantly, a cytotoxicity test confirmed biocompatibility of the printed resin. Finally, the chip exhibited high durability and stability, enabling multiple recycling sessions. We show how the combination of microfluidics and 3D printing can reduce costs and time, providing an efficient platform for particle production while offering a feasible cost-effective alternative to clean-room facility polydimethylsiloxane-based chip microfabrication.
| S-EPMC7824507 | biostudies-literature
Project description:Handheld Electronic Devices (HEDs) play a central role in the hospital environment. However, they can be a vehicle for transmitting (pathogenic) microorganisms. We studied whether disinfection with UV-C light is successful in disinfecting three different HEDs in a clinical setting. Disinfection with UV-C light was performed with the UV-Smart® D25. We took a total of 800 samples on two departments and counted colony forming units. More than half of the baseline measurements were moderately (>10CFU) or highly (>50 CFU) contaminated. Post-disinfection the CFU was 0 in 87% of measurements. We conclude that the UV-Smart® D25 can be used to disinfect non-critical HEDs in clinical healthcare.
| S-EPMC8336058 | biostudies-literature
Project description:Microneedles are a relatively simple, minimally invasive and painless approach to deliver drugs across the skin. However, there remain limitations with this approach because of the materials most commonly utilized for such systems. Silk protein, with tunable and biocompatibility properties, is a useful biomaterial to overcome the current limitations with microneedles. Silk devices preserve drug activity, offer superior mechanical properties and biocompatibility, can be tuned for biodegradability, and can be processed under aqueous, benign conditions. In the present work, the fabrication of dense microneedle arrays from silk with different drug release kinetics is reported. The mechanical properties of the microneedle patches are tuned by post-fabrication treatments or by loading the needles with silk microparticles, to increase capacity and mechanical strength. Drug release is further enhanced by the encapsulation of the drugs in the silk matrix and coating with a thin dissolvable drug layer. The microneedles are used on human cadaver skin and drugs are delivered successfully. The various attributes demonstrated suggest that silk-based microneedle devices can provide significant benefit as a platform material for transdermal drug delivery.
| S-EPMC3883884 | biostudies-literature
Project description:The bubble-free and pulse-free fluid delivery is critical to reliable operation of microfluidic devices. In this study, we propose a new method for stable bubble-free and pulse-free fluid delivery in a microfluidic device. Gas bubbles are separated from liquid by using the density difference between liquid and gas in a closed cavity. The pulsatile flow caused by a peristaltic pump is stabilized via gas compressibility. To demonstrate the proposed method, a fluidic chamber which is composed of two needles for inlet and outlet, one needle for a pinch valve and a closed cavity is carefully designed. By manipulating the opening or closing of the pinch valve, fluids fill up the fluidic chamber or are delivered into a microfluidic device through the fluidic chamber in a bubble-free and pulse-free manner. The performance of the proposed method in bubble-free and pulse-free fluid delivery is quantitatively evaluated. The proposed method is then applied to monitor the temporal variations of fluidic flows of rat blood circulating within a complex fluidic network including a rat, a pinch valve, a reservoir, a peristaltic pump, and the microfluidic device. In addition, the deformability of red blood cells and platelet aggregation are quantitatively evaluated from the information on the temporal variations of blood flows in the microfluidic device. These experimental demonstrations confirm that the proposed method is a promising tool for stable, bubble-free, and pulse-free supply of fluids, including whole blood, into a microfluidic device. Furthermore, the proposed method will be used to quantify the biophysical properties of blood circulating within an extracorporeal bypass loop of animal models.
| S-EPMC3982455 | biostudies-other
Project description:Emerging nano-optofluidic devices have allowed a synergetic relation between photonic integrated circuits and microfluidics, allowing manipulation and transport at the realm of nanoscale science. Simultaneously, optical gradient forces have allowed highly precise control of mechanical motion in nano-optomechanical devices. In this report, we show that the repulsive optical forces of the antisymmetric eigenmodes in an optomechanical device, based on a slot-waveguide structure, increases as the refraction index of the fluid medium increases. This effect provides a feasible way to tailor the repulsive optical forces when these nano-optomechanical devices are immersed in dielectric liquids. Furthermore, the total control of the attractive and repulsive optical forces inside liquids may be applied to design novel nanophotonic devices, containing both microfluidic and nanomechanical functionalities, which may find useful applications in several areas, such as biomedical sensors, manipulators and sorters, amongst others.
| S-EPMC5662605 | biostudies-literature
Project description:BackgroundTo prove effectiveness of wrapping tablet computers in order to reduce microbiological contamination and to evaluate whether a plastic bag-covered tablet leads to impaired user satisfaction or touchscreen functionality.Materials and methodsWithin a period of 11 days 115 patients were provided with a tablet computer while waiting for their magnetic resonance imaging examination. Every day the contamination of the surface of the tablet was determined before the first and after the final use. Before the device was handed over to a patient, it was enclosed in a customized single-use plastic bag, which was analyzed for bacterial contamination after each use. A questionnaire was applied to determine whether the plastic bag impairs the user satisfaction and the functionality of the touchscreen.ResultsFollowing the use by patients the outside of the plastic bags was found to be contaminated with various bacteria (657.5 ± 368.5 colony forming units/day); some of them were potentially pathogenic. In contrast, the plastic bag covered surface of the tablet was significantly less contaminated (1.7 ± 1.9 colony forming units/day). Likewise, unused plastic bags did not show any contamination. 11% of the patients reported problems with the functionality of the touchscreen. These patients admitted that they had never used a tablet or a smartphone before.ConclusionsTablets get severely contaminated during usage in a clinical setting. Wrapping with a customized single-use plastic bag significantly reduces microbiological contamination of the device, protects patients from the acquisition of potentially pathogenic bacteria and hardly impairs the user satisfaction and the functionality of the touchscreen.
| S-EPMC4152284 | biostudies-literature
Project description:The design of new reductive routes to low oxidation state aluminium (Al) compounds offers the opportunity to better understand redox processes at the metal centre and develop reactivity accordingly. Here, a monomeric AlI compound acts as a stoichiometric reducing agent towards a series of AlIII dihydrides, leading to the formation of new low oxidation state species including symmetric and asymmetric dihydrodialanes, and a masked dialumene. These compounds are formed by a series of equilibrium processes involving AlI , AlII and AlIII species and product formation can be manipulated by fine-tuning the reaction conditions. The transient formation of monomeric AlI compounds is proposed: this is shown to be energetically viable by computational (DFT) investigations and reactivity studies show support for the formation of AlI species. Importantly, despite the potential for the equilibrium mixtures to lead to ill-defined reactivity, controlled reactivity of these low oxidation state species is observed.
| S-EPMC9401008 | biostudies-literature
Project description:California is currently in the midst of a record-setting drought. The drought began in 2012 and now includes the lowest calendar-year and 12-mo precipitation, the highest annual temperature, and the most extreme drought indicators on record. The extremely warm and dry conditions have led to acute water shortages, groundwater overdraft, critically low streamflow, and enhanced wildfire risk. Analyzing historical climate observations from California, we find that precipitation deficits in California were more than twice as likely to yield drought years if they occurred when conditions were warm. We find that although there has not been a substantial change in the probability of either negative or moderately negative precipitation anomalies in recent decades, the occurrence of drought years has been greater in the past two decades than in the preceding century. In addition, the probability that precipitation deficits co-occur with warm conditions and the probability that precipitation deficits produce drought have both increased. Climate model experiments with and without anthropogenic forcings reveal that human activities have increased the probability that dry precipitation years are also warm. Further, a large ensemble of climate model realizations reveals that additional global warming over the next few decades is very likely to create ∼ 100% probability that any annual-scale dry period is also extremely warm. We therefore conclude that anthropogenic warming is increasing the probability of co-occurring warm-dry conditions like those that have created the acute human and ecosystem impacts associated with the "exceptional" 2012-2014 drought in California.
| S-EPMC4386330 | biostudies-literature