Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effects of Organic Light-Emitting Diodes on Circadian Rhythm and Sleep.

ABSTRACT:

Objective

Organic light-emitting diodes (OLEDs) emit less blue light than traditional light-emitting diodes (LEDs), and we previously found that early-night OLED light exposure (LE) delays the melatonin phase by less than LED at a color temperature of 4,000 K. As a follow-up study, we investigated the effects of OLED and LED at a different color temperature (3,000 K) on melatonin profile, sleep, and vigilance.

Methods

24 healthy subjects (27.5±5.1 years) were exposed to three light conditions [OLED, LED, and dim light (DL)] from 17:30 to 24:00, in a random order and with a 1-week interval. Saliva samples for melatonin were taken every hour from 18:00 to 24:00. Polysomnography (PSG) and a psychomotor vigilance test (PVT) were performed.

Results

Melatonin onset time was significantly delayed under OLED and LED compared with DL, with no significant difference between OLED and LED. The mean melatonin level at 24:00 under LED was lower than that under DL, but there was no significant difference between OLED LE and DL. The percentage of slow wave sleep (N3) in LED was significantly lower than in OLED.

Conclusion

Exposure to light in the evening can suppress melatonin secretion late at night and disturb deep sleep, and those effects are slightly worse under LED than OLED.

SUBMITTER: Jo H

PROVIDER: S-EPMC8169338 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Effects of Evening Exposure to Light from Organic Light-Emitting Diodes on Melatonin and Sleep.

Project description:Background and purposeOrganic light-emitting diodes (OLEDs) emit less blue light than traditional light-emitting diodes (LEDs), but the effects of OLED light exposure (LE) on melatonin and sleep have not been evaluated.MethodsTwenty-four healthy subjects (age 26.9±5.7 years; including 18 females) with the intermediate chronotype were exposed to three different light conditions [4,000 K 150 lux OLED LE, 4,000 K 150 lux LED LE, and dim light (DL) at <10 lux] for 6.5 h from 17:30 to 24:00, in a random order and with a 1-week interval. Participants entered the unit for the experiment at 16:00, and their daylight was measured by actigraphy from 8:00 to 16:00 during each session. Saliva samples for melatonin were taken every hour from 18:00 to 24:00. Sleep was monitored by polysomnography, and vigilance was evaluated by psychomotor vigilance test upon awakening.ResultsMelatonin onset occurred at 21:11±01:24, 21:20±01:19, and 21:36±01:16 in the DL, OLED, and LED conditions, respectively. Melatonin onset was significantly delayed under LED LE compared to DL (p=0.007) but did not differ under OLED LE (p=0.245). Melatonin suppression, sleep parameters, and vigilance were similar among the three light conditions. The accumulated amount of daytime light in each session was negatively correlated with the melatonin onset time under the DL (rho=-0.634, p=0.002) and OLED (rho=-0.447, p=0.029) conditions, not under the LED condition (p=0.129).ConclusionsMelatonin onset under OLED LE was not significantly delayed compared to DL. Exposure to sufficient daylight may advance melatonin onset even when a subject is exposed to OLED LE in the evening.

| S-EPMC7354965 | biostudies-literature

Blue emitting exciplex for yellow and white organic light-emitting diodes.

Project description:White organic light-emitting diodes (WOLEDs) have several desirable features, but their commercialization is hindered by the poor stability of blue light emitters and high production costs due to complicated device structures. Herein, we investigate a standard blue emitting hole transporting material (HTM) N,N'-bis(naphthalen-1-yl)-N,N'-bis(phenyl)benzidine (NPB) and its exciplex emission upon combining with a suitable electron transporting material (ETM), 3-(biphenyl-4-yl)-5-(4-tert-butylphenyl)-4-phenyl-4H-1,2,4-triazole (TAZ). Blue and yellow OLEDs with simple device structures are developed by using a blend layer, NPB:TAZ, as a blue emitter as well as a host for yellow phosphorescent dopant iridium (III) bis(4-phenylthieno[3,2-c]pyridinato-N,C2')acetylacetonate (PO-01). Strategic device design then exploits the ambipolar charge transport properties of tetracene as a spacer layer to connect these blue and yellow emitting units. The tetracene-linked device demonstrates more promising results compared to those using a conventional charge generation layer (CGL). Judicious choice of the spacer prevents exciton diffusion from the blue emitter unit, yet facilitates charge carrier transport to the yellow emitter unit to enable additional exciplex formation. This complementary behavior of the spacer improves the blue emission properties concomitantly yielding reasonable yellow emission. The overall white light emission properties are enhanced, achieving CIE coordinates (0.36, 0.39) and color temperature (4643 K) similar to daylight. Employing intermolecular exciplex emission in OLEDs simplifies the device architecture via its dual functionality as a host and as an emitter.

| S-EPMC10721783 | biostudies-literature

Ultraflexible organic light-emitting diodes for optogenetic nerve stimulation.

Project description:Organic electronic devices implemented on flexible thin films are attracting increased attention for biomedical applications because they possess extraordinary conformity to curved surfaces. A neuronal device equipped with an organic light-emitting diode (OLED), used in combination with animals that are genetically engineered to include a light-gated ion channel, would enable cell type-specific stimulation to neurons as well as conformal contact to brain tissue and peripheral soft tissue. This potential application of the OLEDs requires strong luminescence, well over the neuronal excitation threshold in addition to flexibility. Compatibility with neuroimaging techniques such as MRI provides a method to investigate the evoked activities in the whole brain. Here, we developed an ultrathin, flexible, MRI-compatible OLED device and demonstrated the activation of channelrhodopsin-2-expressing neurons in animals. Optical stimulation from the OLED attached to nerve fibers induced contractions in the innervated muscles. Mechanical damage to the tissues was significantly reduced because of the flexibility. Owing to the MRI compatibility, neuronal activities induced by direct optical stimulation of the brain were visualized using MRI. The OLED provides an optical interface for modulating the activity of soft neuronal tissues.

| S-EPMC7474697 | biostudies-literature

Pyrenylpyridines: Sky-Blue Emitters for Organic Light-Emitting Diodes.

Project description:A novel sky-blue-emitting tripyrenylpyridine derivative, 2,4,6-tri(1-pyrenyl)pyridine (2,4,6-TPP), has been synthesized using a Suzuki coupling reaction and compared with three previously reported isomeric dipyrenylpyridine (DPP) analogues (2,4-di(1-pyrenyl)pyridine (2,4-DPP), 2,6-di(1-pyrenyl)pyridine (2,6-DPP), and 3,5-di(1-pyrenyl)pyridine (3,5-DPP)). As revealed by single-crystal X-ray analysis and computational simulations, all compounds possess highly twisted conformations in the solid state with interpyrene torsional angles of 42.3°-57.2°. These solid-state conformations and packing variations of pyrenylpyridines could be correlated to observed variations in physical characteristics such as photo/thermal stability and spectral properties, but showed only marginal influence on electrochemical properties. The novel derivative, 2,4,6-TPP, exhibited the lowest degree of crystallinity as revealed by powder X-ray diffraction analysis and formed amorphous thin films as verified using grazing-incidence wide-angle X-ray scattering. This compound also showed high thermal/photo stability relative to its disubstituted analogues (DPPs). Thus, a nondoped organic light-emitting diode (OLED) prototype was fabricated using 2,4,6-TPP as the emissive layer, which displayed a sky-blue electroluminescence with Commission Internationale de L'Eclairage (CIE) coordinates of (0.18, 0.34). This OLED prototype achieved a maximum external quantum efficiency of 6.0 ± 1.2% at 5 V. The relatively high efficiency for this simple-architecture device reflects a good balance of electron and hole transporting ability of 2,4,6-TPP along with efficient exciton formation in this material and indicates its promise as an emitting material for design of blue OLED devices.

| S-EPMC6796915 | biostudies-literature

Towards efficient near-infrared fluorescent organic light-emitting diodes.

Project description:The energy gap law (EG-law) and aggregation quenching are the main limitations to overcome in the design of near-infrared (NIR) organic emitters. Here, we achieve unprecedented results by synergistically addressing both of these limitations. First, we propose porphyrin oligomers with increasing length to attenuate the effects of the EG -law by suppressing the non-radiative rate growth, and to increase the radiative rate via enhancement of the oscillator strength. Second, we design side chains to suppress aggregation quenching. We find that the logarithmic rate of variation in the non-radiative rate vs. EG is suppressed by an order of magnitude with respect to previous studies, and we complement this breakthrough by demonstrating organic light-emitting diodes with an average external quantum efficiency of ~1.1%, which is very promising for a heavy-metal-free 850 nm emitter. We also present a novel quantitative model of the internal quantum efficiency for active layers supporting triplet-to-singlet conversion. These results provide a general strategy for designing high-luminance NIR emitters.

| S-EPMC7820436 | biostudies-literature

Operating organic light-emitting diodes imaged by super-resolution spectroscopy.

Project description:Super-resolution stimulated emission depletion (STED) microscopy is adapted here for materials characterization that would not otherwise be possible. With the example of organic light-emitting diodes (OLEDs), spectral imaging with pixel-by-pixel wavelength discrimination allows us to resolve local-chain environment encoded in the spectral response of the semiconducting polymer, and correlate chain packing with local electroluminescence by using externally applied current as the excitation source. We observe nanoscopic defects that would be unresolvable by traditional microscopy. They are revealed in electroluminescence maps in operating OLEDs with 50?nm spatial resolution. We find that brightest emission comes from regions with more densely packed chains. Conventional microscopy of an operating OLED would lack the resolution needed to discriminate these features, while traditional methods to resolve nanoscale features generally cannot be performed when the device is operating. This points the way towards real-time analysis of materials design principles in devices as they actually operate.

| S-EPMC5512612 | biostudies-literature

Color-Stable White Organic Light-Emitting Diodes Utilizing a Blue-Emitting Electron-Transport Layer.

Project description:We have fabricated efficient and color-stable white organic light-emitting diodes (WOLEDs) based on a simple double-layer device structure consisting of a blue-emitting oligoquinoline electron-transport layer and a poly(N-vinyl carbazole) layer doped with phosphorescent green and red iridium emitters. Pure white color with the CIE coordinates from (0.30, 0.31) to (0.34, 0.37) in the whole operating bias voltage range and luminous efficiency higher than 7 cd/A at a brightness up to 12?000 cd/m2 was achieved. These results demonstrate a new strategy to realizing easily processable, highly efficient, and color-stable WOLEDs with a simple structure.

| S-EPMC6645075 | biostudies-literature

Vacuum nanohole array embedded phosphorescent organic light emitting diodes.

Project description:Light extraction from organic light-emitting diodes that utilize phosphorescent materials has an internal efficiency of 100% but is limited by an external quantum efficiency (EQE) of 30%. In this study, extremely high-efficiency organic light emitting diodes (OLEDs) with an EQE of greater than 50% and low roll-off were produced by inserting a vacuum nanohole array (VNHA) into phosphorescent OLEDs (PhOLEDs). The resultant extraction enhancement was quantified in terms of EQE by comparing experimentally measured results with those produced from optical modeling analysis, which assumes the near-perfect electric characteristics of the device. A comparison of the experimental data and optical modeling results indicated that the VNHA extracts the entire waveguide loss into the air. The EQE obtained in this study is the highest value obtained to date for bottom-emitting OLEDs.

| S-EPMC4346830 | biostudies-other

Organic light-emitting diodes formed by soft contact lamination.

Project description:Although tremendous progress has been made in organic light-emitting diodes (OLEDs), with few exceptions they are fabricated in the standard way by sequentially depositing active layers and electrodes onto a substrate. Here we describe a different approach for building OLEDs, which is based on physical lamination of thin metal electrodes supported by an elastomeric layer against an electroluminescent organic. This method relies only on van der Waals interactions to establish spatially homogeneous, intimate contacts between the electrodes and the organic. We find that devices fabricated in this manner have better performance than those constructed with standard processing techniques. The lamination approach avoids forms of disruption that can be introduced at the electrode/organic interface by metal evaporation and has a reduced sensitivity to pinhole or partial pinhole defects. In addition, because this form of "soft" contact lamination is intrinsically compatible with the techniques of soft lithography, it is easy to build patterned OLEDs with feature sizes into the nanometer regime. This method provides a new route to OLEDs for applications ranging from high performance displays to storage and lithography systems that rely on subwavelength light sources.

| S-EPMC327164 | biostudies-other

Sub-millisecond Control of Neuronal Firing by Organic Light-Emitting Diodes.

Project description:Optogenetics combines optics and genetics to enable minimally invasive cell-type-specific stimulation in living tissue. For the purposes of bio-implantation, there is a need to develop soft, flexible, transparent and highly biocompatible light sources. Organic semiconducting materials have key advantages over their inorganic counterparts, including low Young's moduli, high strain resistances, and wide color tunability. However, until now it has been unclear whether organic light emitting diodes (OLEDs) are capable of providing sufficient optical power for successful neuronal stimulation, while still remaining within a biologically acceptable temperature range. Here we investigate the use of blue polyfluorene- and orange poly(p-phenylenevinylene)-based OLEDs as stimuli for blue-light-activated Sustained Step Function Opsin (SFFO) and red-light-activated ChrimsonR opsin, respectively. We show that, when biased using high frequency (multi-kHz) drive schemes, the OLEDs permit safe and controlled photostimulation of opsin-expressing neurons and were able to control neuronal firing with high temporal-resolution at operating temperatures lower than previously demonstrated.

| S-EPMC6817475 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data