The potential of trace elements mapping in child's natal tooth by laser ablation-ICPMS method.
Ontology highlight
ABSTRACT: Purpose
Tooth enamel might provide past chronological metabolic, nutritional status and trace metal exposure during development. Thus, the trace elements distribution embedded in tooth tissues represents an archive of the environmental conditions. The choice of biomarker is estimated as critical to the measurement of metal exposure. Natal teeth are defined as teeth being present at birth.Methods
LA-ICP-MS provides a quantitative assessment of spatial distribution of trace elements in a natal tooth. The objective of the current study was to compare concentrations of building and other elements in a rare but reliable and valid biomarker - natal tooth.Results
It have been reported presence of potentially toxic elements: Pb, Cu, Mn, Cd, Ni distributed in prenatally and perinatally formed enamel and dentine.Conclusions
Analyses of deciduous enamel can provide answers into individuals' earliest development, including critical pre- and perinatal period.Supplementary information
The online version contains supplementary material available at 10.1007/s40201-021-00611-2.
SUBMITTER: Olszewska A
PROVIDER: S-EPMC8172758 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Teeth are a fundamental tool in forensic odontology for identification in a legal context of those individuals who cannot be identified visually or by other means. Dentine presents physiological exchanges of in trace elements after a period of mineralization and several factors can affect its concentration. The aim of this study was to investigate the concentration of 25 trace elements in the coronal dentine according to sex and type of tooth to determine their relationship with age. A total of 25 trace elements were analyzed in 150 human coronal dentine. Teeth were classified into three age groups, sex and tooth type. The trace elements were grouped as potentially toxic or essential. Inductively Coupled Plasma-Mass Spectrometry and Atomic Emission Spectroscopy were used. The toxic and essential elements were detected in the following order of concentration: Al > Pb > Sn > Li > As > Cd and Ca > P > Mg > Na > S > K > Sr > Zn > Ba > Fe > B > Ti > Mn > Cr > Ni > Cu > Co > Se > V. Our findings show an increase in the concentration of toxic (Pb, Li and Sn) and essential (B, Ba, K, Sr, S and Mg) elements in coronal dentin related to the age of the teeth, regardless of sex. The concentrations of Pb and K in dentin of molars and premolars are the elements that best relate their variations with age. In view of our results, the analysis of these trace elements in dentin in combination with other types of techniques could be established as an element to consider in age dating studies in different forensic situations.
| S-EPMC7305194 | biostudies-literature
Project description:In previous studies, we showed that the size of apatite nanocrystals in tooth enamel can influence its physical properties. This important discovery raised a new question; which factors are regulating the size of these nanocrystals? Trace elements can affect crystallographic properties of synthetic apatite, therefore this study was designed to investigate how trace elements influence enamel's crystallographic properties and ultimately its physical properties. The concentration of trace elements in tooth enamel was determined for 38 extracted human teeth using inductively coupled plasma-optical emission spectroscopy (ICP-OES). The following trace elements were detected: Al, K, Mg, S, Na, Zn, Si, B, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Sb, Se and Ti. Simple and stepwise multiple regression was used to identify the correlations between trace elements concentration in enamel and its crystallographic structure, hardness, resistance to crack propagation, shade lightness and carbonate content. The presence of some trace elements in enamel was correlated with the size (Pb, Ti, Mn) and lattice parameters (Se, Cr, Ni) of apatite nanocrystals. Some trace elements such as Ti was significantly correlated with tooth crystallographic structure and consequently with hardness and shade lightness. We conclude that the presence of trace elements in enamel could influence its physical properties.
| S-EPMC3795877 | biostudies-literature
Project description:Objective: Stroke is the main cause of adult disability in the world, leaving more than half of the patients dependent on daily assistance. Understanding the post-stroke biochemical and molecular changes are critical for patient survival and stroke management. The aim of this work was to investigate the photo-thrombotic ischemic stroke in male rats with particular focus on biochemical and elemental changes in the primary stroke lesion in the somatosensory cortex and surrounding areas, including the corpus callosum. Materials and Methods: FT-IR imaging spectroscopy and LA-ICPMS techniques examined stroke brain samples, which were compared with standard immunohistochemistry studies. Results: The FTIR results revealed that in the lesioned gray matter the relative distribution of lipid, lipid acyl and protein contents decreased significantly. Also at this locus, there was a significant increase in aggregated protein as detected by high-levels A?1-42. Areas close to the stroke focus experienced decrease in the lipid and lipid acyl contents associated with an increase in lipid ester, olefin, and methyl bio-contents with a novel finding of A?1-42 in the PL-GM and L-WM. Elemental analyses realized major changes in the different brain structures that may underscore functionality. Conclusion: In conclusion, FTIR bio-spectroscopy is a non-destructive, rapid, and a refined technique to characterize oxidative stress markers associated with lipid degradation and protein denaturation not characterized by routine approaches. This technique may expedite research into stroke and offer new approaches for neurodegenerative disorders. The results suggest that a good therapeutic strategy should include a mechanism that provides protective effect from brain swelling (edema) and neurotoxicity by scavenging the lipid peroxidation end products.
| S-EPMC6157330 | biostudies-literature
Project description:This paper reviews the problems encountered in eleven studies of Sr isotope analysis using laser ablation multicollector inductively coupled plasma mass spectrometry (LA-MC-ICPMS) in the period 1995-2006. This technique has been shown to have great potential, but the accuracy and precision are limited by: (1) large instrumental mass discrimination, (2) laser-induced isotopic and elemental fractionations and (3) molecular interferences. The most important isobaric interferences are Kr and Rb, whereas Ca dimer/argides and doubly charged rare earth elements (REE) are limited to sample materials which contain substantial amounts of these elements. With modern laser (193 nm) and MC-ICPMS equipment, minerals with >500 ppm Sr content can be analysed with a precision of better than 100 ppm and a spatial resolution (spot size) of approximately 100 microm. The LA MC-ICPMS analysis of 87Sr/86Sr of both carbonate material and plagioclase is successful in all reported studies, although the higher 84Sr/86Sr ratios do suggest in some cases an influence of Ca dimer and/or argides. High Rb/Sr (>0.01) materials have been successfully analysed by carefully measuring the 85Rb/87Rb in standard material and by applying the standard-sample bracketing method for accurate Rb corrections. However, published LA-MC-ICPMS data on clinopyroxene, apatite and sphene records differences when compared with 87Sr/86Sr measured by thermal ionisation mass spectrometry (TIMS) and solution MC-ICPMS. This suggests that further studies are required to ensure that the most optimal correction methods are applied for all isobaric interferences.
| S-EPMC2175028 | biostudies-other
Project description:Protecting a nation's primary production sector and natural estate is heavily dependent on the ability to determine the risk presented by incursions of exotic insect species. Identifying the geographic origin of such biosecurity breaches can be crucial in determining this risk and directing the appropriate operational responses and eradication campaigns, as well as ascertaining incursion pathways. Reading natural abundance biogeochemical markers using mass spectrometry is a powerful tool for tracing ecological pathways as well as provenance determination of commercial products and items of forensic interest. However, application of these methods to trace insects has been underutilised to date and our understanding in this field is still in a phase of basic development. In addition, biogeochemical markers have never been considered in the atypical situation of a biosecurity incursion, where sample sizes are often small, and of unknown geographic origin and plant host. These constraints effectively confound the interpretation of the one or two isotope geo-location markers systems that are currently used, which are therefore unlikely to achieve the level of provenance resolution required in biosecurity interceptions. Here, a novel approach is taken to evaluate the potential for provenance resolution of insect samples through multiple biogeochemical markers. The international pest, Helicoverpa armigera, has been used as a model species to assess the validity of using naturally occurring ?2H, 87Sr/86Sr, 207Pb/206Pb and 208Pb/206Pb isotope ratios and trace element concentration signatures from single moth specimens for regional assignment to natal origin. None of the biogeochemical markers selected were individually able to separate moths from the different experimental regions (150-3000 km apart). Conversely, using multivariate analysis, the region of origin was correctly identified for approximately 75% of individual H. armigera samples. The geographic resolution demonstrated with this approach has considerable potential for biosecurity as well as other disciplines including forensics, ecology and pest management.
| S-EPMC3963883 | biostudies-literature
Project description:Strontium isotopic analysis of sequentially formed tissues, such as tooth enamel, is commonly used to study provenance and mobility of humans and animals. However, the potential of 87Sr/86Sr in tooth enamel to track high-frequency movements has not yet been established, in part due to the lack of data on modern animals of known movement and predictive model of isotope variation across the landscape. To tackle this issue, we measured the 87Sr/86Sr in plant samples taken from a 2000 km2 area in the Altai Mountains (Mongolia), and the 87Sr/86Sr in tooth enamel of domestic caprines whose mobility was monitored using GPS tracking. We show that high-resolution, sequential profiles of strontium isotope composition of tooth enamel reliably reflect the high-frequency mobility of domestic livestock and that short-term residency of about 45 days can be resolved. This offers new perspectives in various disciplines, including forensics, ecology, palaeoanthropology, and bioarchaeology.
| S-EPMC7838167 | biostudies-literature
Project description:This study aims to investigate the potential benefits of adapting the ablating grid in two-dimensional (2D) and three-dimensional (3D) laser ablation inductively coupled plasma mass spectrometry in a single pulse mapping mode. The goals include enhancing the accuracy of surface sampling of element distributions, improving the control of depth-related sampling, smoothing the post-ablation surface for layer-by-layer sampling, and increasing the image quality. To emulate the capabilities of currently unavailable laser ablation stages, a computational approach using geometrical modeling was employed to compound square or round experimentally obtained 3D crater profiles on variable orthogonal or hexagonal ablation grids. These grids were optimized by minimizing surface roughness as a function of average ablation depth, followed by simulating the post-ablation surface and related image quality. An online application (https://laicpms-apps.ki.si/webapps/home/) is available for users to virtually experiment with contracting/expanding orthogonal and hexagonal ablation grids for generic 3D super-Gaussian laser crater profiles, allowing for exploration of the resulting post-ablation surface layer roughness and depth.
| S-EPMC10323869 | biostudies-literature
Project description:Metabolic syndrome (MetS) is a constellation of metabolic derangements, including central obesity, insulin resistance, hypertension, glucose intolerance, and dyslipidemia. The pathogenesis of MetS has been intensively studied, and now many factors are recognized to contribute to the development of MetS. Among these, trace elements influence the structure of proteins, enzymes, and complex carbohydrates, and thus an imbalance in trace elements is an independent risk factor for MetS. The molecular link between trace elements and metabolic homeostasis has been established, and peroxisome proliferator-activated receptors (PPARs) have appeared as key regulators bridging these two elements. This is because on one hand, PPARs are actively involved in various metabolic processes, such as abdominal adiposity and insulin sensitivity, and on the other hand, PPARs sensitively respond to changes in trace elements. For example, an iron overload attenuates hepatic mRNA expression of Ppar-?; zinc supplementation is considered to recover the DNA-binding activity of PPAR-?, which is impaired in steatotic mouse liver; selenium administration downregulates mRNA expression of Ppar-?, thereby improving lipid metabolism and oxidative status in the liver of high-fat diet (HFD)-fed mice. More importantly, PPARs' expression and activity are under the control of the circadian clock and show a robust 24 h rhythmicity, which might be the reasons for the side effects and the clinical limitations of trace elements targeting PPARs. Taken together, understanding the casual relationships among trace elements, PPARs' actions, and the pathogenesis of MetS is of great importance. Further studies are required to explore the chronopharmacological effects of trace elements on the diurnal oscillation of PPARs and the consequent development of MetS.
| S-EPMC7177711 | biostudies-literature
Project description:With high sensitivity at single molecule level, surface-enhanced Raman scattering (SERS) is considered as an ultrasensitive optical detection technology with broad application prospects in lots of fields. However, the complicated fabrication and unaffordable price of SERS substrate are still a roadblock on the way to be widely used in industry. In this work, the SERS spectra on a commercial laser engraved Teflon (PTFE) film with engraved microarray are investigated. The wettability of film surface modulated by laser engraving make the microarray have the ability to decrease the contact area on film surface while water evaporation. The SEM image of the engraved area points out the micro/nanostructures generated engraving process is crucial to its superhydrophobic property. The probing molecules (i.e., methylene blue and rhodamine6G) were utilized to investigate with the limit of detection (1?×?10-14 M). Furthermore, the biomolecule (bovine serum albumin) was used to demonstrate its benefits in biological applications. The measured intensities of Raman spectra on this PTFE with laser engraved microarray demonstrate its potential value for a SERS substrate. Our work on this simple, cheap SERS substrate with high sensitivity has a great commercial value and plenty of application in lots of fields.
| S-EPMC6104470 | biostudies-literature
Project description:Background and aimBacterial biofilms play a major role in the etiology of periodontal and peri-implant diseases. The aim of the study was to evaluate the removal of bacterial biofilms and attachment of epithelial cells (EC), gingival fibroblasts (GF) and osteoblast-like cells (OC) to dentin and titanium surfaces after Er:YAG laser (Er:YAG) in comparison with other treatment methods.Material and methodsMulti-species bacterial biofilms were grown on standardized dentin and titanium specimens with a sand-blasted and acid etched (SLA) surface for 3.5 d. Thereafter, the specimens were placed into artificially-created pockets. The following methods for biofilm removal were used: 1) Gracey (dentin) or titanium curettes (CUR), 2) Er:YAG, 3) photodynamic therapy (PDT) and 4) CUR with adjunctive PDT (CUR/PDT). Colony forming units (CFUs) of the remaining biofilms and attachment of EC, GF and OC were determined. Statistical analysis was performed by means of ANOVA with post-hoc LSD.ResultsAll treatment methods decreased statistically significantly (p<0.001) total CFUs in biofilms compared with untreated dentin and titanium surfaces respectively. On dentin, Er:YAG was equally efficient as CUR and PDT but inferior to CUR/PDT (p = 0.005). On titanium, surfaces, the use of Er:YAG resulted in statistically significantly superior biofilm removal compared to the 3 other treatments (each p<0.001). Counts of attached EC, GF and OC were the lowest on untreated contaminated dentin and titanium surfaces each. After CUR/PDT higher EC counts were found on dentin (p = 0.006). On titanium, all decontamination methods statistically significantly increased (p<0.001) the counts of attached EC without differences between groups. Statistically significantly higher counts of GF (p = 0.024) and OC (p<0.001) were observed after Er:YAG decontamination compared with untreated surfaces.ConclusionAblation of subgingival biofilms and in particular decontamination of titanium implant surfaces with an Er:YAG laser seem to be a promising approach and warrants further investigations.
| S-EPMC5268770 | biostudies-literature