Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Low temperature methanation of CO₂ over an amorphous cobalt-based catalyst.

ABSTRACT: CO₂ methanation is an important reaction in CO₂ valorization. Because of the high kinetic barriers, the reaction usually needs to proceed at higher temperature (>300 °C). High-efficiency CO₂ methanation at low temperature (<200 °C) is an interesting topic, and only several noble metal catalysts were reported to achieve this goal. Currently, design of cheap metal catalysts that can effectively accelerate this reaction at low temperature is still a challenge. In this work, we found that the amorphous Co-Zr_0.1-B-O catalyst could catalyze the reaction at above 140 °C. The activity of the catalyst at 180 °C reached 10.7 mmol_CO₂ g_cat ^-1 h^-1, which is comparable to or even higher than that of some noble metal catalysts under similar conditions. The Zr promoter in this work had the highest promoting factor to date among the catalysts for CO₂ methanation. As far as we know, this is the first report of an amorphous transition metal catalyst that could effectively accelerate CO₂ methanation. The outstanding performance of the catalyst could be ascribed to two aspects. The amorphous nature of the catalyst offered abundant surface defects and intrinsic active sites. On the other hand, the Zr promoter could enlarge the surface area of the catalyst, enrich the Co atoms on the catalyst surface, and tune the valence state of the atoms at the catalyst surface. The reaction mechanism was proposed based on the control experiments.

SUBMITTER: Tu J

PROVIDER: S-EPMC8179427 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A low temperature organic synthesis of monodispersed NiRu nanocrystals for CO2 methanation.

Project description:In this study, monodispersed NiRu nanocrystals with a diameter of 3 nm were synthesized at 90 °C via a tuning hot-inject method to lower the temperature of the organic phase synthesis of monodispersed nanomaterials. The key factor for the nanocrystalline formation of NiRu alloy nanocrystals was summarized in detail. Simultaneously, the synergistic effect of Ni and Ru in CO2 methanation was explored. Doping trace Ru can significantly improve the conversion rate of CO2 methanation and CH4 selectivity. The underlying mechanism was studied in detail via X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), temperature-programmed hydrogen reduction (H2-TPR) and desorption (H2-TPD) tests, and temperature-programmed desorption of CO2 (CO2-TPD). This study gives out a new way for the general synthesis of monodisperse nickel-based nanocrystals and provides a reference for the development and application of monodispersed nanoparticles for CO2 methanation.

| S-EPMC8693694 | biostudies-literature

CO2 Hydrogenation at Atmospheric Pressure and Low Temperature Using Plasma-Enhanced Catalysis over Supported Cobalt Oxide Catalysts.

Project description:CO2 is a promising renewable, cheap, and abundant C1 feedstock for producing valuable chemicals, such as CO and methanol. In conventional reactors, because of thermodynamic constraints, converting CO2 to methanol requires high temperature and pressure, typically 250 °C and 20 bar. Nonthermal plasma is a better option, as it can convert CO2 at near-ambient temperature and pressure. Adding a catalyst to such plasma setups can enhance conversion and selectivity. However, we know little about the effects of catalysts in such systems. Here, we study CO2 hydrogenation in a dielectric barrier discharge plasma-catalysis setup under ambient conditions using MgO, γ-Al2O3, and a series of Co x O y /MgO catalysts. While all three catalyst types enhanced CO2 conversion, Co x O y /MgO gave the best results, converting up to 35% of CO2 and reaching the highest methanol yield (10%). Control experiments showed that the basic MgO support is more active than the acidic γ-Al2O3, and that MgO-supported cobalt oxide catalysts improve the selectivity toward methanol. The methanol yield can be tuned by changing the metal loading. Overall, our study shows the utility of plasma catalysis for CO2 conversion under mild conditions, with the potential to reduce the energy footprint of CO2-recycling processes.

| S-EPMC7709469 | biostudies-literature

Preparation of Ni based mesoporous Al2O3 catalyst with enhanced CO2 methanation performance.

Project description:A Ni based mesoporous γ-Al2O3 (MA) catalyst was prepared via partial hydrolysis without organic surfactants and employed in the carbon dioxide methanation reaction. The obtained catalysts were characterized by N2 adsorption-desorption, H2-TPR, XRD, XPS, TG, SEM and TEM-EDS techniques. CO2 methanation was performed in a fixed-bed reactor. A high surface area of MA with excellent hydrothermal stability was obtained, which promoted the dispersion of nickel species, producing a better catalytic performance. Incorporation of more NiO species into the Ni/MA catalyst increased the amount of active metallic Ni sties, further improving the catalytic activity and CH4 selectivity. Moreover, the monolithic skeleton of MA with fabric-like walls suppressed the aggregation of active metallic Ni sites and carbon deposition, enhancing the catalyst's stability, which provides a new insight for potential industrial applications.

| S-EPMC9061876 | biostudies-literature

Oxygen vacancies in Ru/TiO2 - drivers of low-temperature CO2 methanation assessed by multimodal operando spectroscopy.

Project description:Hydrogenation of CO2 is very attractive for transforming this greenhouse gas into valuable high energy density compounds. In this work, we developed a highly active and stable Ru/TiO2 catalyst for CO2 methanation prepared by a solgel method that revealed much higher activity in methanation of CO2 (ca. 4-14 times higher turnover frequencies at 140-210°C) than state-of-the-art Ru/TiO2 catalysts and a control sample prepared by wetness impregnation. This is attributed to a high concentration of O-vacancies, inherent to the solgel methodology, which play a dual role for 1) activation of CO2 and 2) transfer of electrons to interfacial Ru sites as evident from operando DRIFTS and in situ EPR investigations. These results suggest that charge transfer from O-vacancies to interfacial Ru sites and subsequent electron donation from filled metal d-orbitals to antibonding orbitals of adsorbed CO are decisive factors in boosting the CO2 methanation activity.

| S-EPMC8861654 | biostudies-literature

Efficient Solar-Driven CO2 Methanation and Hydrogen Storage Over Nickel Catalyst Derived from Metal-Organic Frameworks with Rich Oxygen Vacancies.

Project description:Solar-driven photothermal conversion of carbon dioxide (CO2 ) to methane (CH4 ) is a promising approach to remedy energy shortage and climate changes, where highly efficient photothermal catalysts for CO2 methanation urgently need to be designed. Herein, nickel-based catalysts (Ni/ZrO2 ) derived from metal-organic frameworks (MOFs) are fabricated and studied for photothermal CO2 methanation. The optimized catalyst 50Ni/ZrO2 achieves a stable CH4 production rate of 583.3 mmol g-1 h-1 in a continuous stability test, which is almost tenfold higher than that of 50Ni/C-ZrO2 synthesized via commercial ZrO2 . Physicochemical properties indicate that 50Ni/ZrO2 generates more tetragonal ZrO2 and possesses more oxygen vacancies (OVs) as well as enhanced nickel-ZrO2 interaction. As a result, 50Ni/ZrO2 exhibits the strong abilities of light absorption and light-to-heat conversion, superior adsorption capacities of reactants (H2 , CO2 ), and an intermediate product (CO), which finally boosts CH4 formation. This work provides an efficient strategy to design a photothermocatalyst of CO2 methanation through utilizing MOFs-derived support.

| S-EPMC10700172 | biostudies-literature

Mechanism of Cobalt-Catalyzed CO Hydrogenation: 1. Methanation.

Project description:The mechanism of CO hydrogenation to CH4 at 260 °C on a cobalt catalyst is investigated using steady-state isotopic transient kinetic analysis (SSITKA) and backward and forward chemical transient kinetic analysis (CTKA). The dependence of CH x residence time is determined by 12CO/H2 ? 13CO/H2 SSITKA as a function of the CO and H2 partial pressure and shows that the CH4 formation rate is mainly controlled by CH x hydrogenation rather than CO dissociation. Backward CO/H2 ? H2 CTKA emphasizes the importance of H coverage on the slow CH x hydrogenation step. The H coverage strongly depends on the CO coverage, which is directly related to CO partial pressure. Combining SSITKA and backward CTKA allows determining that the amount of additional CH4 obtained during CTKA is nearly equal to the amount of CO adsorbed to the cobalt surface. Thus, under the given conditions overall barrier for CO hydrogenation to CH4 under methanation condition is lower than the CO adsorption energy. Forward CTKA measurements reveal that O hydrogenation to H2O is also a relatively slow step compared to CO dissociation. The combined transient kinetic data are used to fit an explicit microkinetic model for the methanation reaction. The mechanism involving direct CO dissociation represents the data better than a mechanism in which H-assisted CO dissociation is assumed. Microkinetics simulations based on the fitted parameters confirms that under methanation conditions the overall CO consumption rate is mainly controlled by C hydrogenation and to a smaller degree by O hydrogenation and CO dissociation. These simulations are also used to explore the influence of CO and H2 partial pressure on possible rate-controlling steps.

| S-EPMC5716442 | biostudies-literature

Room-Temperature CO2 Hydrogenation to Methanol over Air-Stable hcp-PdMo Intermetallic Catalyst.

Project description:CO2 hydrogenation to methanol is one of the most promising routes to CO2 utilization. However, difficulty in CO2 activation at low temperature, catalyst stability, catalyst preparation, and product separation are obstacles to the realization of a practical hydrogenation process under mild conditions. Here, we report a PdMo intermetallic catalyst for low-temperature CO2 hydrogenation. This catalyst can be synthesized by the facile ammonolysis of an oxide precursor and exhibits excellent stability in air and the reaction atmosphere and significantly enhances the catalytic activity for CO2 hydrogenation to methanol and CO compared with a Pd catalyst. A turnover frequency of 0.15 h-1 was achieved for methanol synthesis at 0.9 MPa and 25 °C, which is comparable to or higher than that of the state-of-the-art heterogeneous catalysts under higher-pressure conditions (4-5 MPa).

| S-EPMC10161205 | biostudies-literature

Ni nanocatalysts supported on mesoporous Al2O3-CeO2 for CO2 methanation at low temperature.

Project description:The selectivity and activity of a nickel catalyst for the hydrogenation of carbon dioxide to form methane at low temperatures could be enhanced by mesoporous Al2O3-CeO2 synthesized through a one-pot sol-gel method. The performances of the as-prepared Ni/Al2O3-CeO2 catalysts exceeded those of their single Al2O3 counterpart giving a conversion of 78% carbon dioxide with 100% selectivity for methane during 100 h testing, without any deactivation, at the low temperature of 320 °C. The influence of CeO2 doping on the structure of the catalysts, the interactions between the mesoporous support and nickel species, and the reduction behaviors of Ni2+ ions were investigated in detail. In this work, the addition of CeO2 to the composites increased the oxygen vacancies and active metallic nickel sites, and also decreased the size of the nickel particles, thus improving the low temperature catalytic activity and selectivity significantly.

| S-EPMC9048714 | biostudies-literature

Highly Active Ce- and Mg-Promoted Ni Catalysts Supported on Cellulose-Derived Carbon for Low-Temperature CO2 Methanation.

Project description:The CO2 methanation performance of Mg- and/or Ce-promoted Ni catalysts supported on cellulose-derived carbon (CDC) was investigated. The samples, prepared by biomorphic mineralization techniques, exhibit pore distributions correlated to the particle sizes, revealing a direct effect of the metal content in the textural properties of the samples. The catalytic performance, evaluated as CO2 conversion and CH4 selectivity, reveals that Ce is a better promoter than Mg, reaching higher conversion values in all of the studied temperature range (150-500 °C). In the interval of 350-400 °C, Ni-Mg-Ce/CDC attains the maximum yield to methane, 80%, reaching near 100% CH4 selectivity. Ce-promoted catalysts were highly active at low temperatures (175 °C), achieving 54% CO2 conversion with near 100% CH4 selectivity. Furthermore, the large potential stability of the Ni-Mg-Ce/CDC catalyst during consecutive cycles of reaction opens a promising route for the optimization of the Sabatier process using this type of catalyst.

| S-EPMC9161724 | biostudies-literature

Promotion of Pt/CeO2 catalyst by hydrogen treatment for low-temperature CO oxidation.

Project description:Low temperature CO oxidation reaction is known to be facilitated over platinum supported on a reducible cerium oxide. Pt species act as binding sites for reactant CO molecules, and oxygen vacancies on surface of cerium oxide atomically activate the reactant O2 molecules. However, the impacts of size of Pt species and concentration of oxygen vacancy at the surface of cerium oxide on the CO oxidation reaction have not been clearly distinguished, thereby various diverse approaches have been suggested to date. Here using the co-precipitation method we have prepared pure ceria support and infiltrated it with Pt solution to obtain 0.5 atomic% Pt supported on cerium oxide catalyst, and then systematically varied the size of Pt from single atom to ∼1.7 nm sized nanoparticles and oxygen vacancy concentration at surface of cerium oxide by controlling the heat-treatment conditions, which are temperature and oxygen partial pressure. It is found that Pt nanoparticles in range of 1-1.7 nm achieve 100% of CO oxidation reaction at ∼100 °C lower temperature compared to Pt single atom owing to the facile adsorption of CO but weaker binding strength between Pt and CO molecules, and the oxygen vacancy in the vicinity of Pt accelerates CO oxidation below 150 °C. Based on this understanding, we show that a simple hydrogen reduction at 550 °C for the single atom Pt supported on CeO2 catalyst induces the formation of highly dispersed Pt nanoparticles with size of 1.7 ± 0.2 nm and the higher concentration of surface oxygen vacancies simultaneously, enabling 100% conversion from CO to CO2 at 200 °C as well as 16% conversion even at 150 °C owing to the synergistic effects of Pt nanoparticles and oxygen vacancies.

| S-EPMC9070415 | biostudies-literature