Browse
Submit Data
Databases
API
Help

Dataset Information

7 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Optimised power harvesting by controlling the pressure applied to molecular junctions.

ABSTRACT: A major potential advantage of creating thermoelectric devices using self-assembled molecular layers is their mechanical flexibility. Previous reports have discussed the advantage of this flexibility from the perspective of facile skin attachment and the ability to avoid mechanical deformation. In this work, we demonstrate that the thermoelectric properties of such molecular devices can be controlled by taking advantage of their mechanical flexibility. The thermoelectric properties of self-assembled monolayers (SAMs) fabricated from thiol terminated molecules were measured with a modified AFM system, and the conformation of the SAMs was controlled by regulating the loading force between the organic thin film and the probe, which changes the tilt angle at the metal-molecule interface. We tracked the thermopower shift vs. the tilt angle of the SAM and showed that changes in both the electrical conductivity and Seebeck coefficient combine to optimize the power factor at a specific angle. This optimization of thermoelectric performance via applied pressure is confirmed through the use of theoretical calculations and is expected to be a general method for optimising the power factor of SAMs.

SUBMITTER: Wang X

PROVIDER: S-EPMC8179551 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Stable and optoelectronic dipeptide assemblies for power harvesting.

Project description:Low biocompatibility or engineerability of conventional inorganic materials limits their extensive application for power harvesting in biological systems or at bio-machine interfaces. In contrast, intrinsically biocompatible peptide self-assemblies have shown promising potential as a new type of ideal components for eco-friendly optoelectronic energy-harvesting devices. However, the structural instability, weak mechanical strength, and inefficient optical or electrical properties severely impede their extensive application. Here, we demonstrate tryptophan-based aromatic dipeptide supramolecular structures to be direct wide-gap semiconductors. The molecular packings can be effectively modulated by changing the peptide sequence. The extensive and directional hydrogen bonding and aromatic interactions endow the structures with unique rigidity and thermal stability, as well as a wide-spectrum photoluminescence covering nearly the entire visible region, optical waveguiding, temperature/irradiation-dependent conductivity, and the ability to sustain quite high external electric fields. Furthermore, the assemblies display high piezoelectric properties, with a measured open-circuit voltage of up to 1.4 V. Our work provides insights into using aromatic short peptide self-assemblies for the fabrication of biocompatible, miniaturized electronics for power generation with tailored semiconducting optoelectronic properties and improved structural stability.

| S-EPMC6850901 | biostudies-literature

Pseudogene repair driven by selection pressure applied in experimental evolution

Project description:We performed evolution of ∆menF∆entC strain of Escherichia coli K12 MG1655 to study how the system adapt to the loss of siderophore biosynthesis. RNA-Seq was performed to examine the underlying transcriptional rewiring.

2018-12-20 | GSE122779 | GEO

Harvesting Electrical Power during Carbon Capture using Various Amine Solvents.

Project description:There exists an urgent demand for the advancement of technologies that reduce and capture carbon dioxide (CO2) emissions to mitigate anthropogenic contributions to climate change. This paper compares the maximum power densities achieved from the combination of reverse electrodialysis (RED) with carbon capture (CC) using various CC solvents. Carbon capture reverse electrodialysis (CCRED) harvests energy from the salinity gradients generated from the reaction of CO2 with specific solvents, generally amines. To eliminate the requirement of freshwater as an external resource, we took advantage of a semiclosed system that would allow the inputs to be industrial emissions and heat and the outputs to be electrical power, clean emissions, and captured CO2. We assessed the power density that can be attained using CCRED with five commonly studied CC solvents: monoethanolamine (MEA), diethanolamine (DEA), N-methyldiethanolamine (MDEA), 2-amino-2-methyl-2-propanol (AMP), and ammonia. We achieved the highest power density, 0.94 W m-2 cell-1, using ammonia. This work provides a foundation for future iterations of CCRED that may help to incentivize adoption of CC technology.

| S-EPMC9483915 | biostudies-literature

Magnetic and Electric Energy Harvesting Technologies in Power Grids: A Review.

Project description:With the development of intelligent modern power systems, real-time sensing and monitoring of system operating conditions have become one of the enabling technologies. Due to their flexibility, robustness and broad serviceable scope, wireless sensor networks have become a promising candidate for achieving the condition monitoring in a power grid. In order to solve the problematic power supplies of the sensors, energy harvesting (EH) technology has attracted increasing research interest. The motivation of this paper is to investigate the profiles of harnessing the electric and magnetic fields and facilitate the further application of energy scavenging techniques in the context of power systems. In this paper, the fundamentals, current status, challenges, and future prospects of the two most applicable EH methods in the grid-magnetic field energy harvesting (MEH) and electric field energy harvesting (EEH) are reviewed. The characteristics of the magnetic field and electric field under typical scenarios in power systems is analyzed first. Then the MEH and EEH are classified and reviewed respectively according to the structural difference of energy harvesters, which have been further evaluated based on the comparison of advantages and disadvantages for the future development trend.

| S-EPMC7085584 | biostudies-literature

Reverse electrowetting as a new approach to high-power energy harvesting.

Project description:Over the last decade electrical batteries have emerged as a critical bottleneck for portable electronics development. High-power mechanical energy harvesting can potentially provide a valuable alternative to the use of batteries, but, until now, a suitable mechanical-to-electrical energy conversion technology did not exist. Here we describe a novel mechanical-to-electrical energy conversion method based on the reverse electrowetting phenomenon. Electrical energy generation is achieved through the interaction of arrays of moving microscopic liquid droplets with novel nanometer-thick multilayer dielectric films. Advantages of this process include the production of high power densities, up to 10(3) W m(-2); the ability to directly utilize a very broad range of mechanical forces and displacements; and the ability to directly output a broad range of currents and voltages, from several volts to tens of volts. These advantages make this method uniquely suited for high-power energy harvesting from a wide variety of environmental mechanical energy sources.

| S-EPMC3265368 | biostudies-literature

Piezoelectric Energy Harvesting from Rotational Motion to Power Industrial Maintenance Sensors.

Project description:In industry, forecasting machinery failures could save significant time and money if any maintenance breaks are predictable. The aim of this work was to develop an energy harvesting system which could, in theory, power condition monitoring sensors in heavy machinery. In this study, piezoelectric-cantilever-type energy harvesters were attached to a motor and spun around with different rotational speeds. A mass was placed on the tip of the cantilevers, which were mounted pointing inward toward the center axis of the motor. Pointing a cantilever tip inward and increasing the distance from the center axis of the motor decreased the natural resonance frequency significantly and thus enabled higher harvested energy levels with lower rotational frequencies. Motion of the cantilever was also controlled by altering the movement space of the tip mass. This created another possibility to control the cantilever dynamics and prevent overstressing of the piezoelectric material. Restricting the movement of the tip mass can also be used to harvest energy over a wider frequency range and prevent the harvester from getting trapped into a stagnant position. The highest calculated raw power of 579.2 µW at 7.4 Hz rotational frequency was measured from a cantilever with outer dimensions of 25 mm × 100 mm. Results suggest that an energy harvesting system with multiple cantilevers could be designed to replace batteries in condition sensors monitoring revolving machinery.

| S-EPMC9570772 | biostudies-literature

An optimised protocol for molecular identification of Eimeria from chickens.

Project description:Molecular approaches supporting identification of Eimeria parasites infecting chickens have been available for more than 20 years, although they have largely failed to replace traditional measures such as microscopy and pathology. Limitations of microscopy-led diagnostics, including a requirement for specialist parasitological expertise and low sample throughput, are yet to be outweighed by the difficulties associated with accessing genomic DNA from environmental Eimeria samples. A key step towards the use of Eimeria species-specific PCR as a sensitive and reproducible discriminatory tool for use in the field is the production of a standardised protocol that includes sample collection and DNA template preparation, as well as primer selection from the numerous PCR assays now published. Such a protocol will facilitate development of valuable epidemiological datasets which may be easily compared between studies and laboratories. The outcome of an optimisation process undertaken in laboratories in India and the UK is described here, identifying four steps. First, samples were collected into a 2% (w/v) potassium dichromate solution. Second, oocysts were enriched by flotation in saturated saline. Third, genomic DNA was extracted using a QIAamp DNA Stool mini kit protocol including a mechanical homogenisation step. Finally, nested PCR was carried out using previously published primers targeting the internal transcribed spacer region 1 (ITS-1). Alternative methods tested included sample processing in the presence of faecal material, DNA extraction using a traditional phenol/chloroform protocol, the use of SCAR multiplex PCR (one tube and two tube versions) and speciation using the morphometric tool COCCIMORPH for the first time with field samples.

| S-EPMC3858809 | biostudies-literature

Simulation methods to estimate design power: an overview for applied research.

Project description:BackgroundEstimating the required sample size and statistical power for a study is an integral part of study design. For standard designs, power equations provide an efficient solution to the problem, but they are unavailable for many complex study designs that arise in practice. For such complex study designs, computer simulation is a useful alternative for estimating study power. Although this approach is well known among statisticians, in our experience many epidemiologists and social scientists are unfamiliar with the technique. This article aims to address this knowledge gap.MethodsWe review an approach to estimate study power for individual- or cluster-randomized designs using computer simulation. This flexible approach arises naturally from the model used to derive conventional power equations, but extends those methods to accommodate arbitrarily complex designs. The method is universally applicable to a broad range of designs and outcomes, and we present the material in a way that is approachable for quantitative, applied researchers. We illustrate the method using two examples (one simple, one complex) based on sanitation and nutritional interventions to improve child growth.ResultsWe first show how simulation reproduces conventional power estimates for simple randomized designs over a broad range of sample scenarios to familiarize the reader with the approach. We then demonstrate how to extend the simulation approach to more complex designs. Finally, we discuss extensions to the examples in the article, and provide computer code to efficiently run the example simulations in both R and Stata.ConclusionsSimulation methods offer a flexible option to estimate statistical power for standard and non-traditional study designs and parameters of interest. The approach we have described is universally applicable for evaluating study designs used in epidemiologic and social science research.

| S-EPMC3146952 | biostudies-literature

Wearable, Knitted 3D Spacer Thermoelectric Generator with Detachable p-n Junctions for Body Heat Energy Harvesting.

Project description:Textile-based thermoelectric (TE) devices are being investigated to power smart textiles autonomously. While previous research has focused on a solid system where the required junctions are fabricated into the device, there has been limited attention given to replacing these TE systems reliably. This work looks at a newer approach to the construction and demonstration of a wearable thermoelectric structure that employs three-dimensional knitted spacers to increase the temperature difference where the TE junctions are detachable and disposable. This system features positive and negative junctions which can be removed while maintaining its excellent voltage generation in low ΔT and good Seebeck coefficients. A mathematical model simulates the potential energy outputs and maximum power points generated, which can be used to increase the device's performance for future wearable sensing applications.

| S-EPMC11359260 | biostudies-literature

Molecular harvesting with electroporation for tissue profiling.

Project description:Recent developments in personalized medicine are based on molecular measurement steps that guide personally adjusted medical decisions. A central approach to molecular profiling consists of measuring DNA, RNA, and/or proteins in tissue samples, most notably in and around tumors. This measurement yields molecular biomarkers that are potentially predictive of response and of tumor type. Current methods in cancer therapy mostly use tissue biopsy as the starting point of molecular profiling. Tissue biopsies involve a physical resection of a small tissue sample, leading to localized tissue injury, bleeding, inflammation and stress, as well as to an increased risk of metastasis. Here we developed a technology for harvesting biomolecules from tissues using electroporation. We show that tissue electroporation, achieved using a combination of high-voltage short pulses, 50 pulses 500?V?cm-1, 30?µs, 1?Hz, with low-voltage long pulses 50 pulses 50?V?cm-1, 10?ms, delivered at 1?Hz, allows for tissue-specific extraction of RNA and proteins. We specifically tested RNA and protein extraction from excised kidney and liver samples and from excised HepG2 tumors in mice. Further in vivo development of extraction methods based on electroporation can drive novel approaches to the molecular profiling of tumors and of tumor environment and to related diagnosis practices.

| S-EPMC6823461 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data