Self-sustained green neuromorphic interfaces.
Ontology highlight
ABSTRACT:
SUBMITTER: Fu T
PROVIDER: S-EPMC8184933 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Dye-containing industrial effluents create major concern nowadays. To address the problem, magnetic nickel oxide nanoparticles (NONPs) were synthesized using the autopropagator combustion technique assisted by sucrose as fuel and used for the removal of toxic malachite green (MG) from water. The material was characterized by scanning electron microscopy (SEM-EDS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), vibrating sample magnetism (VSM), point of zero charge (pHZPC), and Brunauer-Emmet-Teller surface area analysis. SEM images show flowerlike texture with the presence of multiple pores. VSM reveals a well-defined hysteresis at room temperature, confirming a permanent magnetic nature of the material. pHZPC was found to be 6.63, which enables dye separation in the drinking water pH range. MG removal from water was carried out in the batch mode with optimized physicochemical parameters such as contact time, pH, temperature, and dose. Langmuir adsorption capacity was estimated to be 87.72 mg/g. Pseudo-second order kinetics (R 2 = 0.999) and Langmuir isotherm model (R 2 = 0.997) were found to best fit. The magnetic nature facilitates fast and quantitative separation of NONPs from solution using a hand-held magnet. Dye-loaded NONPs can be easily regenerated up to 89% and reused up to five cycles without significant loss of activity. The mechanism of adsorption is proposed to be a combination of electrostatic attraction and weak hydrogen bonding. Strategically designed straightforward synthetic protocol, low cost, high uptake capacity, and sustainable use render NONPs an ideal alternative for future dye treatment.
| S-EPMC7364633 | biostudies-literature
Project description:We study the assembly of magnetite nanoparticles in water-based ferrofluids in wetting layers close to silicon substrates with different functionalization without and with an out-of-plane magnetic field. For particles of nominal sizes 5, 15, and 25 nm, we extract density profiles from neutron reflectivity measurements. We show that self-assembly is only promoted by a magnetic field if a seed layer is formed at the silicon substrate. Such a layer can be formed by chemisorption of activated N-hydroxysuccinimide ester-coated nanoparticles at a (3-aminopropyl)triethoxysilane functionalized surface. Less dense packing is reported for physisorption of the same particles at a piranha-treated (strongly hydrophilic) silicon wafer, and no wetting layer is found for a self-assembled monolayer of octadecyltrichlorosilane (strongly hydrophobic) at the interface. We show that once the seed layer is formed and under an out-of-plane magnetic field further wetting layers assemble. These layers become denser with time, larger magnetic fields, higher particle concentrations, and larger moment of the nanoparticles.
| S-EPMC8154863 | biostudies-literature
Project description:Sensory information processing in robot skins currently rely on a centralized approach where signal transduction (on the body) is separated from centralized computation and decision-making, requiring the transfer of large amounts of data from periphery to central processors, at the cost of wiring, latency, fault tolerance and robustness. We envision a decentralized approach where intelligence is embedded in the sensing nodes, using a unique neuromorphic methodology to extract relevant information in robotic skins. Here we specifically address pain perception and the association of nociception with tactile perception to trigger the escape reflex in a sensorized robotic arm. The proposed system comprises self-healable materials and memtransistors as enabling technologies for the implementation of neuromorphic nociceptors, spiking local associative learning and communication. Configuring memtransistors as gated-threshold and -memristive switches, the demonstrated system features in-memory edge computing with minimal hardware circuitry and wiring, and enhanced fault tolerance and robustness.
| S-EPMC7424569 | biostudies-literature
Project description:Turbulence is known for its ability to vigorously mix fluid and transport heat. Despite over a century of research for enhancing heat transport, few have exceeded the inherent limits posed by turbulent-mixing. Here we have conceptualized a kind of "active particle" turbulence, which far exceeds the limits of classical thermal turbulence. By adding a minute concentration (?v???1%) of a heavy liquid (hydrofluoroether) to a water-based turbulent convection system, a remarkably efficient biphasic dynamics is born, which supersedes turbulent heat transport by up to 500%. The system operates on a self-sustained dynamically equilibrated cycle of a "catalyst-like" species, and exploits several heat-carrier agents including pseudo-turbulence, latent heat and bidirectional wake capture. We find that the heat transfer enhancement is dominated by the kinematics of the active elements and their induced-agitation. The present finding opens the door towards the establishment of tunable, ultra-high efficiency heat transfer/mixing systems.
| S-EPMC6659658 | biostudies-literature
Project description:Intracortical brain-computer interface (BCI) decoders are typically retrained daily to maintain stable performance. Self-recalibrating decoders aim to remove the burden this may present in the clinic by training themselves autonomously during normal use but have only been developed for continuous control. Here we address the problem for discrete decoding (classifiers).We recorded threshold crossings from 96-electrode arrays implanted in the motor cortex of two rhesus macaques performing center-out reaches in 7 directions over 41 and 36 separate days spanning 48 and 58 days in total for offline analysis.We show that for the purposes of developing a self-recalibrating classifier, tuning parameters can be considered as fixed within days and that parameters on the same electrode move up and down together between days. Further, drift is constrained across time, which is reflected in the performance of a standard classifier which does not progressively worsen if it is not retrained daily, though overall performance is reduced by more than 10% compared to a daily retrained classifier. Two novel self-recalibrating classifiers produce a ~15% increase in classification accuracy over that achieved by the non-retrained classifier to nearly recover the performance of the daily retrained classifier.We believe that the development of classifiers that require no daily retraining will accelerate the clinical translation of BCI systems. Future work should test these results in a closed-loop setting.
| S-EPMC4393645 | biostudies-literature
Project description:In solid-liquid systems, macroscopic solids lose their equilibrium and melt in a manner that results in overall movement of the solid-liquid interface. This phenomenon occurs when they are subjected to temperature gradients or external stress, for example. However, many experiments suggest that the melting of nano- and micro-sized metallic nuclei follows a different process not described by traditional melting theory. In this paper, we demonstrate through simulation that the melting of solid nuclei of these sizes occurs via random breaches at the interfaces. Moreover, this breaching process occurs at the exact solid-liquid equilibrium temperature and in the absence of any external disturbance, which suggests the name "self-instability" for this melting process. We attribute this spontaneous instability to the curvature of the samples; based on the relationship between the sample's instability and its curvature, we propose a destabilizing model for small systems. This model fits well with experimental results and leads to new insights into the instability behavior of small-sized systems; these insights have broad implications for research topics ranging from dendrite self-fragmentation to nanoparticle instability.
| S-EPMC4685266 | biostudies-literature
Project description:The ability for artificially reproducing human brain type signals' processing is one of the main challenges in modern information technology, being one of the milestones for developing global communicating networks and artificial intelligence. Electronic devices termed memristors have been proposed as effective artificial synapses able to emulate the plasticity of biological counterparts. Here we report for the first time a single crystalline nanowire based model system capable of combining all memristive functions - non-volatile bipolar memory, multilevel switching, selector and synaptic operations imitating Ca2+ dynamics of biological synapses. Besides underlying common electrochemical fundamentals of biological and artificial redox-based synapses, a detailed analysis of the memristive mechanism revealed the importance of surfaces and interfaces in crystalline materials. Our work demonstrates the realization of self-assembled, self-limited devices feasible for implementation via bottom up approach, as an attractive solution for the ultimate system miniaturization needed for the hardware realization of brain-inspired systems.
| S-EPMC6279771 | biostudies-literature
Project description:A major characteristic of spiking neural networks (SNNs) over conventional artificial neural networks (ANNs) is their ability to spike, enabling them to use spike timing for coding and efficient computing. In this paper, we assess if neuromorphic datasets recorded from static images are able to evaluate the ability of SNNs to use spike timings in their calculations. We have analyzed N-MNIST, N-Caltech101 and DvsGesture along these lines, but focus our study on N-MNIST. First we evaluate if additional information is encoded in the time domain in a neuromorphic dataset. We show that an ANN trained with backpropagation on frame-based versions of N-MNIST and N-Caltech101 images achieve 99.23 and 78.01% accuracy. These are comparable to the state of the art-showing that an algorithm that purely works on spatial data can classify these datasets. Second we compare N-MNIST and DvsGesture on two STDP algorithms, RD-STDP, that can classify only spatial data, and STDP-tempotron that classifies spatiotemporal data. We demonstrate that RD-STDP performs very well on N-MNIST, while STDP-tempotron performs better on DvsGesture. Since DvsGesture has a temporal dimension, it requires STDP-tempotron, while N-MNIST can be adequately classified by an algorithm that works on spatial data alone. This shows that precise spike timings are not important in N-MNIST. N-MNIST does not, therefore, highlight the ability of SNNs to classify temporal data. The conclusions of this paper open the question-what dataset can evaluate SNN ability to classify temporal data?
| S-EPMC8027306 | biostudies-literature
Project description:An RNA enzyme that catalyzes the RNA-templated joining of RNA was converted to a format whereby two enzymes catalyze each other's synthesis from a total of four oligonucleotide substrates. These cross-replicating RNA enzymes undergo self-sustained exponential amplification in the absence of proteins or other biological materials. Amplification occurs with a doubling time of about 1 hour and can be continued indefinitely. Populations of various cross-replicating enzymes were constructed and allowed to compete for a common pool of substrates, during which recombinant replicators arose and grew to dominate the population. These replicating RNA enzymes can serve as an experimental model of a genetic system. Many such model systems could be constructed, allowing different selective outcomes to be related to the underlying properties of the genetic system.
| S-EPMC2652413 | biostudies-literature
Project description:Sustained dropwise condensation of water requires rapid shedding of condensed droplets from the surface. Here, we elucidate a microfluidic mechanism that spontaneously sweeps condensed microscale droplets without the need for the traditional droplet removal pathways such as use of superhydrophobicity for droplet rolling and jumping and utilization of wettability gradients for directional droplet transport among others. The mechanism involves self-generated, directional, cascading coalescence sequences of condensed microscale droplets along standard hydrophobic microgrooves. Each sequence appears like a spontaneous zipping process, can sweep droplets along the microgroove at speeds of up to ?1 m/s, and can extend for lengths more than 100 times the microgroove width. We investigate this phenomenon through high-speed in situ microscale condensation observations and demonstrate that it is enabled by rapid oscillations of a condensate meniscus formed locally in a filled microgroove and pinned on its edges. Such oscillations are in turn spontaneously initiated by coalescence of an individual droplet growing on the ridge with the microgroove meniscus. We quantify the coalescence cascades by characterizing the size distribution of the swept droplets and propose a simple analytical model to explain the results. We also demonstrate that, as condensation proceeds on the hydrophobic microgrooved surface, the coalescence cascades recur spontaneously through repetitive dewetting of the microgrooves. Lastly, we identify surface design rules for consistent realization of the cascades. The hydrophobic microgrooved textures required for the activation of this mechanism can be realized through conventional, scalable surface fabrication methods on a broad range of materials (we demonstrate with aluminum and silicon), thus promising direct application in a host of phase-change processes.
| S-EPMC6703749 | biostudies-literature