Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A redox-active organic salt for safer Na-ion batteries.

ABSTRACT: Overcharge abuse can trigger thermal runaway when a device is left unattended. Redox shuttles, as economic and efficient electrolyte additives, have been proven to provide reliable and reversible protection for state-of-art Li-ion batteries (LIBs) against overcharge. Here, a functional organic salt, trisaminocyclopropenium perchlorate (TAC•ClO₄), is developed and employed as a redox shuttle for overcharge protection in a Na-ion battery system. This type of novel redox shuttle molecule is reported for the first time. As a unique ionic compound with the smallest aromatic ring structure, TAC•ClO₄ exhibits distinctive attributes of fast diffusion, high solubility, and ultrahigh chemical/electrochemical stability in both redox states. With merely 0.1 M TAC•ClO₄ in electrolyte, Na₃V₂(PO₄)₃ cathode can carry overcharge current even up to 10C or 400% SOC. Na₃V₂(PO₄)₃/hard carbon cells demonstrated strong anti-overcharging ability of 176 cycles at 0.5C rate and 54 cycles at 1C rate with 100% overcharge. Moreover, TAC•ClO₄ addition has little impact on the electrochemical performance of Na-ion batteries, especially on the rate performance and the initial Columbic efficiency. Interestingly, a unique and reversible electrochromic behavior of TAC•ClO₄ electrolyte can promptly provide the device an overcharge alarm under a designed potential to further enhance the safety level.

SUBMITTER: Ji W

PROVIDER: S-EPMC8186495 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Redox-Active Separators for Lithium-Ion Batteries.

Project description:A bilayered cellulose-based separator design is presented that can enhance the electrochemical performance of lithium-ion batteries (LIBs) via the inclusion of a porous redox-active layer. The proposed flexible redox-active separator consists of a mesoporous, insulating nanocellulose fiber layer that provides the necessary insulation between the electrodes and a porous, conductive, and redox-active polypyrrole-nanocellulose layer. The latter layer provides mechanical support to the nanocellulose layer and adds extra capacity to the LIBs. The redox-active separator is mechanically flexible, and no internal short circuits are observed during the operation of the LIBs, even when the redox-active layer is in direct contact with both electrodes in a symmetric lithium-lithium cell. By replacing a conventional polyethylene separator with a redox-active separator, the capacity of the proof-of-concept LIB battery containing a LiFePO4 cathode and a Li metal anode can be increased from 0.16 to 0.276 mA h due to the capacity contribution from the redox-active separator. As the presented redox-active separator concept can be used to increase the capacities of electrochemical energy storage systems, this approach may pave the way for new types of functional separators.

| S-EPMC5867047 | biostudies-literature

Redox-Flow Batteries: From Metals to Organic Redox-Active Materials.

Project description:Research on redox-flow batteries (RFBs) is currently experiencing a significant upturn, stimulated by the growing need to store increasing quantities of sustainably generated electrical energy. RFBs are promising candidates for the creation of smart grids, particularly when combined with photovoltaics and wind farms. To achieve the goal of "green", safe, and cost-efficient energy storage, research has shifted from metal-based materials to organic active materials in recent years. This Review presents an overview of various flow-battery systems. Relevant studies concerning their history are discussed as well as their development over the last few years from the classical inorganic, to organic/inorganic, to RFBs with organic redox-active cathode and anode materials. Available technologies are analyzed in terms of their technical, economic, and environmental aspects; the advantages and limitations of these systems are also discussed. Further technological challenges and prospective research possibilities are highlighted.

| S-EPMC5248651 | biostudies-literature

Redox Activity of Sodium Vanadium Oxides towards Oxidation in Na Ion Batteries.

Project description:The search for new materials that could be used as electrode material for Na-ion batteries is one of the most challenging issues of today. Many transition metal oxide families as well as transition metal polyanionic frameworks have been proposed over the last five years. In this work, we report the sodium extraction from Na₂V₃O₇, which is a tunnel type structure built of [V₃O₇]2−∞ nanotubes held by sodium ions. We report a reversible charge capacity of 80 mAh/g at 2.8 V vs. Na⁺/Na due to the V5+/V4+ redox activity. No oxygen redox activity has been observed for this material nor for the vanadium (5+) oxide Na₄V₂O₇.

| S-EPMC6024919 | biostudies-literature

Redox-active zinc thiolates for low-cost aqueous rechargeable Zn-ion batteries.

Project description:Aqueous zinc-ion batteries (AZIBs) are promising candidates for large-scale electrical energy storage due to the inexpensive, safe, and non-toxic nature of zinc. One key area that requires further development is electrode materials that store Zn2+ ions with high reversibility and fast kinetics. To determine the viability of low-cost organosulfur compounds as OEMs for AZIBs, we investigate how structural modification affects electrochemical performance in Zn-thiolate complexes 1 and 2. Remarkably, modification of one thiolate in 1 to sulfide in 2 reduces the voltage hysteresis from 1.04 V to 0.15 V. While 1 exhibits negligible specific capacity due to the formation of insulating DMcT polymers, 2 delivers a capacity of 107 mA h g-1 with a primary discharge plateau at 1.1 V vs. Zn2+/Zn. Spectroscopic studies of 2 suggest a Zn2+ and H+ co-insertion mechanism with Zn2+ as the predominant charge carrier. Capacity fading in Zn-2 cells likely results from the formation of (i) soluble H+ insertion products and (ii) non-redox-active side products. Increasing electrolyte concentration and using a Nafion membrane significantly enhances the stability of 2 by suppressing H+ insertion. Our findings provide insight into the molecular design strategies to reduce the polarization potential and improve the cycling stability of the thiolate/disulfide redox couple in aqueous battery systems.

| S-EPMC8635210 | biostudies-literature

A Bifunctional Fluorophosphate Electrolyte for Safer Sodium-Ion Batteries.

Project description:Most of the currently developed sodium-ion batteries (SIBs) have potential safety hazards due to the use of highly volatile and flammable alkyl carbonate electrolytes. To overcome this challenge, we report an electrochemically compatible and nonflammable electrolyte, tris(2,2,2-trifluoroethyl) phosphate (TFEP) with low-concentration sodium bis(fluorosulfonyl)imide (0.9 M), which is designed not only to match perfectly with the hard carbon (HC) anode but also to enhance the thermal stability of SIBs. Experimental results and theoretical calculations reveal that TFEP molecules have a significantly low barrier to decompose before Na+ inserts into HC, forming a stable inorganic solid-electrolyte interface layer, thus improving the electrochemical and structural stabilities of HC anodes. An HC/Na3V2(PO4)3 full cell using TFEP electrolyte shows a high capacity retention of 89.2% after 300 cycles and a dramatically reduced exothermic heat at elevated temperature, implying its potential application for safe and low-cost larger-scale energy storage.

| S-EPMC6279964 | biostudies-literature

Perylenetetracarboxylic Diimide as Diffusion-Less Electrode Material for High-Rate Organic Na-Ion Batteries.

Project description:In this work 3,4,9,10-perylenetetracarboxylic diimide (PTCDI) is investigated as electrode material for organic Na-ion batteries. Since PTCDI is a widely used industrial pigment, it may turn out to be a cost-effective, abundant, and environmentally benign cathode material for secondary Na-ion batteries. Among other carbonyl pigments, PTCDI is especially interesting due to its high Na-storage capacity in combination with remarkable high rate capabilities. The detailed analysis of cyclic voltammetry measurements reveals a diffusion-less mechanism, suggesting that Na-ion storage in the PTCDI film allows for exceptionally fast charging/discharging rates. This finding is further corroborated by galvanostatic sodiation measurements at high rates of 17 C (2.3 A g-1 ), showing that 57 % of the theoretically possible capacity of PTCDI, or 78 mAh g-1 , are attained in only 3.5 min charging time.

| S-EPMC7839514 | biostudies-literature

Development of efficient aqueous organic redox flow batteries using ion-sieving sulfonated polymer membranes.

Project description:Redox flow batteries using aqueous organic-based electrolytes are promising candidates for developing cost-effective grid-scale energy storage devices. However, a significant drawback of these batteries is the cross-mixing of active species through the membrane, which causes battery performance degradation. To overcome this issue, here we report size-selective ion-exchange membranes prepared by sulfonation of a spirobifluorene-based microporous polymer and demonstrate their efficient ion sieving functions in flow batteries. The spirobifluorene unit allows control over the degree of sulfonation to optimize the transport of cations, whilst the microporous structure inhibits the crossover of organic molecules via molecular sieving. Furthermore, the enhanced membrane selectivity mitigates the crossover-induced capacity decay whilst maintaining good ionic conductivity for aqueous electrolyte solution at pH 9, where the redox-active organic molecules show long-term stability. We also prove the boosting effect of the membranes on the energy efficiency and peak power density of the aqueous redox flow battery, which shows stable operation for about 120 h (i.e., 2100 charge-discharge cycles at 100 mA cm-2) in a laboratory-scale cell.

| S-EPMC9177609 | biostudies-literature

Na<sup>+</sup>/vacancy disordering promises high-rate Na-ion batteries.

Project description:As one of the most fascinating cathode candidates for Na-ion batteries (NIBs), P2-type Na layered oxides usually exhibit various single-phase domains accompanied by different Na+/vacancy-ordered superstructures, depending on the Na concentration when explored in a limited electrochemical window. Therefore, their Na+ kinetics and cycling stability at high rates are subjected to these superstructures, incurring obvious voltage plateaus in the electrochemical profiles and insufficient battery performance as cathode materials for NIBs. We show that this problem can be effectively diminished by reasonable structure modulation to construct a completely disordered arrangement of Na-vacancy within Na layers. The combined analysis of scanning transmission electron microscopy, ex situ x-ray absorption spectroscopy, and operando x-ray diffraction experiments, coupled with density functional theory calculations, reveals that Na+/vacancy disordering between the transition metal oxide slabs ensures both fast Na mobility (10-10 to 10-9 cm2 s-1) and a low Na diffusion barrier (170 meV) in P2-type compounds. As a consequence, the designed P2-Na2/3Ni1/3Mn1/3Ti1/3O2 displays extra-long cycle life (83.9% capacity retention after 500 cycles at 1 C) and unprecedented rate capability (77.5% of the initial capacity at a high rate of 20 C). These findings open up a new route to precisely design high-rate cathode materials for rechargeable NIBs.

| S-EPMC5844706 | biostudies-literature

Benchmarking organic active materials for aqueous redox flow batteries in terms of lifetime and cost.

Project description:Flow batteries are one option for future, low-cost stationary energy storage. We present a perspective overview of the potential cost of organic active materials for aqueous flow batteries based on a comprehensive mathematical model. The battery capital costs for 38 different organic active materials, as well as the state-of-the-art vanadium system are elucidated. We reveal that only a small number of organic molecules would result in costs close to the vanadium reference system. We identify the most promising candidate as the phenazine 3,3'-(phenazine-1,6-diylbis(azanediyl))dipropionic acid) [1,6-DPAP], suggesting costs even below that of the vanadium reference. Additional cost-saving potential can be expected by mass production of these active materials; major benefits lie in the reduced electrolyte costs as well as power costs, although plant maintenance is a major challenge when applying organic materials. Moreover, this work is designed to be expandable. The developed calculation tool (ReFlowLab) accompanying this publication is open for updates with new data.

| S-EPMC10590391 | biostudies-literature

High-Performant All-Organic Aqueous Sodium-Ion Batteries Enabled by PTCDA Electrodes and a Hybrid Na/Mg Electrolyte.

Project description:Aqueous sodium-ion batteries (ASIBs) are aspiring candidates for low environmental impact energy storage, especially when using organic electrodes. In this respect, perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA) is a promising anode active material, but it suffers from extensive dissolution in conventional aqueous electrolytes. As a remedy, we here present a novel aqueous electrolyte, which inhibits the PTCDA dissolution and enables their use as all-organic ASIB anodes with high capacity retention and Coulombic efficiencies. Furthermore, the electrolyte is based on two, hence "hybrid", inexpensive and non-fluorinated Na/Mg-salts, it displays favourable physico-chemical properties and an electrochemical stability window >3 V without resorting to the extreme salt concentrations of water-in-salt electrolytes. Altogether, this paves the way for ASIBs with both relatively high energy densities, inexpensive total cell chemistries, long-term sustainability, and improved safety.

| S-EPMC8596776 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data