Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Single-Layer ZnO Hollow Hemispheres Enable High-Performance Self-Powered Perovskite Photodetector for Optical Communication.

ABSTRACT: The carrier transport layer with reflection reduction morphology has attracted extensive attention for improving the utilization of light. Herein, we introduced single-layer hollow ZnO hemisphere arrays (ZHAs) behaving light trapping effect as the electron transport layer in perovskite photodetectors (PDs). The single-layer hollow ZHAs can not only reduce the reflection, but also widen the angle of the effective incident light and especially transfer the distribution of the optical field from the ZnO/FTO interface to the perovskite active layer confirmed by the 3D finite-difference time-domain simulation. These merits benefit for the generation, transport and separation of carriers, improving the light utilization efficiency. Finally, our optimized FTO/ZHA/CsPbBr₃/carbon structure PDs showed high self-powered performance with a linear dynamic range of 120.3 dB, a detectivity of 4.2 × 10¹² Jones, rise/fall time of 13/28 µs and the f_-3 dB of up to 28 kHz. Benefiting from the high device performance, the PD was demonstrated to the application in the directional transmission of encrypted files as the signal receiving port with super high accuracy. This work uniquely utilizes the features of high-performance self-powered perovskite PDs in optical communication, paving the path to wide applications of all-inorganic perovskite PDs.

SUBMITTER: Pan X

PROVIDER: S-EPMC8187591 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Self-Powered Organometal Halide Perovskite Photodetector with Embedded Silver Nanowires.

Project description:Metal-semiconductor-metal (MSM) configuration of perovskite photodetectors (PPDs) suggests easy and low-cost manufacturing. However, the basic structures of MSM PPDs include vertical and lateral configurations, which require the use of expensive materials such as transparent conductive oxides or/and sophisticated fabrication techniques such as lithography. Integrating metallic nanowire-based electrodes into the perovskite photo-absorber layer to form one-half of the MSM PPD structure could potentially resolve the key issues of both configurations. Here, a manufacturing of solution-processed and self-powered MSM PPDs with embedded silver nanowire electrodes is demonstrated. The embedding of silver nanowire electrode into the perovskite layer is achieved by treating the silver nanowire/perovskite double layer with a methylamine gas vapor. The evaporated gold layer is used as the second electrode to form MSM PPDs. The prepared MSM PPDs show a photoresponsivity of 4 × 10-5 AW-1 in the UV region and 2 × 10-5 AW-1 in the visible region. On average, the devices exhibit a photocurrent of 1.1 × 10-6 A under white light (75 mW cm-2) illumination with an ON/OFF ratio of 83.4. The results presented in this work open up a new method for development and fabrication of simple, solution-processable MSM self-powered PPDs.

| S-EPMC9000456 | biostudies-literature

Deep-Ultraviolet Transparent Electrode Design for High-Performance and Self-Powered Perovskite Photodetector.

Project description:In this study, a highly crystalline and transparent indium-tin-oxide (ITO) thin film was prepared on a quartz substrate via RF sputtering to fabricate an efficient bottom-to-top illuminated electrode for an ultraviolet C (UVC) photodetector. Accordingly, the 26.6 nm thick ITO thin film, which was deposited using the sputtering method followed by post-annealing treatment, exhibited good transparency to deep-UV spectra (67% at a wavelength of 254 nm), along with high electrical conductivity (11.3 S/cm). Under 254 nm UVC illumination, the lead-halide-perovskite-based photodetector developed on the prepared ITO electrode in a vertical structure exhibited an excellent on/off ratio of 1.05 × 104, a superb responsivity of 250.98 mA/W, and a high specific detectivity of 4.71 × 1012 Jones without external energy consumption. This study indicates that post-annealed ITO ultrathin films can be used as electrodes that satisfy both the electrical conductivity and deep-UV transparency requirements for high-performance bottom-illuminated optoelectronic devices, particularly for use in UVC photodetectors.

| S-EPMC10675135 | biostudies-literature

Photocurrent Polarity Controlled by Light Wavelength in Self-Powered ZnO Nanowires/SnS Photodetector System.

Project description:Self-powered photodetectors are expected to play a crucial role in future nano-optoelectronic devices owing to their independent and sustainable operation. Based on the heterojunction between ZnO nanowires (NWs) and shuttle-like SnS, we design a self-powered photodetector exhibiting wide-range photoresponse and tunable spectral selectivity. Differently from conventional devices, a wavelength-induced photocurrent polarity is observed in the ZnO NWs/SnS photodetector, which enables the device to distinguish between photons in the UV and visible (VIS) regions. This is due to switching of the interfacial modulation by the pyroelectric-polarization potential (pyro-potential) inside ZnO NWs and thermoelectric-polarization potential (thermo-potential) inside SnS. A photocurrent enhancement of 125% and improved responsivity of 364 μA/W are obtained under the pyro-potential upon 690 nm light illumination, whereas reversed responsivity of -155 μA/W is obtained under the thermo-potential upon 365 nm light illumination. We believe the photocurrent polarity could be useful for improving resolution of dynamic light sensing/imaging.

| S-EPMC6135929 | biostudies-literature

A Self-Powered Transparent Photodetector Based on Detached Vertical (In,Ga)N Nanowires with 360° Omnidirectional Detection for Underwater Wireless Optical Communication.

Project description:Underwater wireless optical communication (UWOC) is a wireless communication technology using visible light to transmit data in an underwater environment, which has wide applications. Based on lift-off (In,Ga)N nanowires, this work has proposed and successfully demonstrated a self-powered photoelectrochemical (PEC) photodetector (PD) with excellent transmissivity. The transparent functionality of the PD is critical for 360° omnidirectional underwater detection, which was realized by detaching the (In,Ga)N nanowires from the opaque epitaxial substrates to the indium tin oxide (ITO)/glass. It was also found that the insulating SiO2 layer can enhance the photocurrent by about 12 times. The core-shell structure of the nanowires is beneficial for generating carriers and contributing to the photocurrent. Furthermore, a communication system with ASCII code is set to demonstrate the PD detection in underwater communication. This work paves an effective way to develop 360° omnidirectional PDs for the wide applications in UWOC system and underwater photodetection.

| S-EPMC8621864 | biostudies-literature

Optical, electrical and photoresponse data of flexible and high-performing NiO/ZnO ultraviolet photodetector.

Project description:In this work, the fabrication process flow of ZnO/NiO heterojunction device on a PET substrate, optical properties, physical properties and photoresponses presented (Patel and Kim, 2017) [1]. Absorption coefficient and Tauc plots of ZnO and NiO samples are summarized. Digital photograph of flexible NiO/ZnO/ITO device on a PET substrate is presented. Surface morphologies of ITO on PET, polycrystalline ZnO on ITO/PET, and nanocrystalline NiO on ZnO/ITO/PET is presented with a demonstration of scissor-cut design. NiO/ZnO/ITO/PET photoelectric device has advantages of large-scale production and light-weight. Transmittance, reflectance and absorbance dataset of the native PET substrate (100 μm thick) is summarized. Photoresponses of the transparent (NiO/ZnO/ITO/PET) device with bias modulations including the rising edge and falling edge are included in this article.

| S-EPMC5988381 | biostudies-literature

Toward Industrial Production of a High-Performance Self-Powered Ultraviolet Photodetector Using Nanoporous Al-Doped ZnO Thin Films.

Project description:Al-doped ZnO (AZO) thin films are effective n-type semiconductors for ultraviolet (UV) detection because of their low cost, high electron mobility, and high sensitivity to UV light, especially in the UVA spectrum. However, a reasonable compromise between performance (such as sensitivity, detectivity, and response time) and fabrication ease remains an obstacle to the practicability of AZO-based UV photodetectors. To address this issue, we propose an efficient strategy to achieve a large AZO photoactive area for outstanding performance, along with a facile sol-gel method. Consequently, the device exhibits a superb on/off ratio of >104, a high detectivity of 1.85 × 1012 Jones, and a fast response speed under 365 nm UVA illumination without external energy consumption. Hence, this study suggests a self-powered and high-performance nanoporous AZO-based UVA detector with an environmentally friendly scalable process that satisfies industrial production requirements for numerous practical UV-detection applications.

| S-EPMC10536242 | biostudies-literature

Low Dark Current and Performance Enhanced Perovskite Photodetector by Graphene Oxide as an Interfacial Layer.

Project description:Organic-inorganic hybrid perovskite photodetectors are gaining much interest recently for their high performance in photodetection, due to excellent light absorption, low cost, and ease of fabrication. Lower defect density and large grain size are always favorable for efficient and stable devices. Herein, we applied the interface engineering technique for hybrid trilayer (TiO2/graphene oxide/perovskite) photodetector to attain better crystallinity and defect passivation. The graphene oxide (GO) sandwich layer has been introduced in the perovskite photodetector for improved crystallization, better charge extraction, low dark current, and enhanced carrier lifetime. Moreover, the trilayer photodetector exhibits improved device performance with a high on/off ratio of 1.3 × 104, high responsivity of 3.38 AW-1, and low dark current of 1.55 × 10-11 A. The insertion of the GO layer also suppressed the perovskite degradation process and consequently improved the device stability. The current study focuses on the significance of interface engineering to boost device performance by improving interfacial defect passivation and better carrier transport.

| S-EPMC8778836 | biostudies-literature

High-speed colour-converting photodetector with all-inorganic CsPbBr3 perovskite nanocrystals for ultraviolet light communication.

Project description:Optical wireless communication (OWC) using the ultra-broad spectrum of the visible-to-ultraviolet (UV) wavelength region remains a vital field of research for mitigating the saturated bandwidth of radio-frequency (RF) communication. However, the lack of an efficient UV photodetection methodology hinders the development of UV-based communication. The key technological impediment is related to the low UV-photon absorption in existing silicon photodetectors, which offer low-cost and mature platforms. To address this technology gap, we report a hybrid Si-based photodetection scheme by incorporating CsPbBr3 perovskite nanocrystals (NCs) with a high photoluminescence quantum yield (PLQY) and a fast photoluminescence (PL) decay time as a UV-to-visible colour-converting layer for high-speed solar-blind UV communication. The facile formation of drop-cast CsPbBr3 perovskite NCs leads to a high PLQY of up to ~73% and strong absorption in the UV region. With the addition of the NC layer, a nearly threefold improvement in the responsivity and an increase of ~25% in the external quantum efficiency (EQE) of the solar-blind region compared to a commercial silicon-based photodetector were observed. Moreover, time-resolved photoluminescence measurements demonstrated a decay time of 4.5?ns under a 372-nm UV excitation source, thus elucidating the potential of this layer as a fast colour-converting layer. A high data rate of up to 34?Mbps in solar-blind communication was achieved using the hybrid CsPbBr3-silicon photodetection scheme in conjunction with a 278-nm UVC light-emitting diode (LED). These findings demonstrate the feasibility of an integrated high-speed photoreceiver design of a composition-tuneable perovskite-based phosphor and a low-cost silicon-based photodetector for UV communication.

| S-EPMC6804731 | biostudies-literature

Highly Efficient and Stable Self-Powered Mixed Tin-Lead Perovskite Photodetector Used in Remote Wearable Health Monitoring Technology.

Project description:Realization of remote wearable health monitoring (RWHM) technology for the flexible photodiodes is highly desirable in remote-sensing healthcare systems used in space stations, oceans, and forecasting warning, which demands high external quantum efficiency (EQE) and detectivity in NIR region. Traditional inorganic photodetectors (PDs) are mechanically rigid and expensive while the widely reported solution-processed mixed tin-lead (MSP) perovskite photodetectors (PPDs) exhibit a trade-off between EQE and detectivity in the NIR region. Herein, a novel functional passivating antioxidant (FPA) strategy has been introduced for the first time to simultaneously improve crystallization, restrain Sn2+ oxidization, and reduce defects in MSP perovskite films by multiple interactions between thiophene-2-carbohydrazide (TAH) molecules and cations/anions in MSP perovskite. The resultant solution-processed rigid mixed Sn-Pb PPD simultaneously achieves high EQE (75.4% at 840 nm), detectivity (1.8 × 1012 Jones at 840 nm), ultrafast response time (trise /tfall = 94 ns/97 ns), and improved stability. This work also highlights the demonstration of the first flexible photodiode using MSP perovskite and FPA strategy with remarkably high EQE (75% at 840 nm), and operational stability. Most importantly, the RWHM is implemented for the first time in the PIN MSP perovskite photodiodes to remotely monitor the heart rate of humans at rest and after-run conditions.

| S-EPMC9929128 | biostudies-literature

Photocatalytic hollow TiO<sub>2</sub> and ZnO nanospheres prepared by atomic layer deposition.

Project description:Carbon nanospheres (CNSs) were prepared by hydrothermal synthesis, and coated with TiO2 and ZnO nanofilms by atomic layer deposition. Subsequently, through burning out the carbon core templates hollow metal oxide nanospheres were obtained. The substrates, the carbon-metal oxide composites and the hollow nanospheres were characterized with TG/DTA-MS, FTIR, Raman, XRD, SEM-EDX, TEM-SAED and their photocatalytic activity was also investigated. The results indicate that CNSs are not beneficial for photocatalysis, but the crystalline hollow metal oxide nanospheres have considerable photocatalytic activity.

| S-EPMC5489517 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data