Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Impact of the Composition of Alcohol/Water Dispersion on the Proton Transport and Morphology of Cast Perfluorinated Sulfonic Acid Ionomer Thin Films.

ABSTRACT: The dispersion of perfluorinated sulfonic acid ionomers in catalyst inks is an important factor that controls the performance of catalyst layers in membrane electrode assemblies of polymer electrolyte fuel cells. Herein, the effects of water/alcohol compositions on the morphological properties and proton transport are examined by grazing incidence small-angle X-ray scattering, grazing incidence wide-angle X-ray scattering, and electrochemical impedance spectroscopy. The thin films cast by a high water/alcohol ratio Nafion dispersion have high proton conductivity and well-defined hydrophilic/hydrophobic phase separation, which indicates that the proton conductivity and morphology of the Nafion thin films are strongly influenced by the state of dispersion. This finding is expected to further understand the morphology and proton transport properties of Nafion thin films with different water/alcohol ratios, which has implications for the performance of the Pt/Nafion interface.

SUBMITTER: Gao X

PROVIDER: S-EPMC8190810 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Mechanocatalytic Depolymerization of Cellulose With Perfluorinated Sulfonic Acid Ionomers.

Project description:Here, we investigated that the mechanocatalytic depolymerization of cellulose in the presence of Aquivion, a sulfonated perfluorinated ionomer. Under optimized conditions, yields of water soluble sugars of 90-97% were obtained using Aquivion PW98 and PW66, respectively, as a solid acid catalyst. The detailed characterization of the water soluble fraction revealed (i) the selective formation of oligosaccharides with a DP up to 11 and (ii) that depolymerization and reversion reactions concomitantly occurred during the mechanocatalytic process, although the first largely predominated. More importantly, we discussed on the critical role of water contained in Aquivion and cellulose on the efficiency of the mechanocatalytic process.

| S-EPMC5874291 | biostudies-literature

Electrical transport and grain growth in solution-cast, chloride-terminated cadmium selenide nanocrystal thin films.

Project description:We report the evolution of electrical transport and grain size during the sintering of thin films spin-cast from soluble phosphine and amine-bound, chloride-terminated cadmium selenide nanocrystals. Sintering of the nanocrystals occurs in three distinct stages as the annealing temperature is increased: (1) reversible desorption of the organic ligands (≤150 °C), (2) irreversible particle fusion (200-300 °C), and (3) ripening of the grains to >5 nm domains (>200 °C). Grain growth occurs at 200 °C in films with 8 atom % Cl(-), while films with 3 atom % Cl(-) resist growth until 300 °C. Fused nanocrystalline thin films (grain size = 4.5-5.5 nm) on thermally grown silicon dioxide gate dielectrics produce field-effect transistors with electron mobilities as high as 25 cm(2)/(Vs) and on/off ratios of 10(5) with less than 0.5 V hysteresis in threshold voltage without the addition of indium.

| S-EPMC4216209 | biostudies-literature

Thin water films and particle morphology evolution in nanocrystalline MgO.

Project description:A key question in the field of ceramics and catalysis is how and to what extent residual water in the reactive environment of a metal oxide particle powder affects particle coarsening and morphology. With X-ray Diffraction (XRD) and Transmission Electron Microscopy (TEM), we investigated annealing-induced morphology changes on powders of MgO nanocubes in different gaseous H2O environments. The use of such a model system for particle powders enabled us to describe how adsorbed water that originates from short exposure to air determines the evolution of MgO grain size, morphology, and microstructure. While cubic nanoparticles with a predominant abundance of (100) surface planes retain their shape after annealing to T = 1173 K under continuous pumping with a base pressure of water p(H2O) = 10-5 mbar, higher water partial pressures promote mass transport on the surfaces and across interfaces of such particle systems. This leads to substantial growth and intergrowth of particles and simultaneously favors the formation of step edges and shallow protrusions on terraces. The mass transfer is promoted by thin films of water providing a two-dimensional solvent for Mg2+ ion hydration. In addition, we obtained direct evidence for hydroxylation-induced stabilization of (110) faces and step edges of the grain surfaces.

| S-EPMC6175089 | biostudies-literature

Contactless actuation of perfluorinated ionomer membranes in salt solution: an experimental investigation.

Project description:A variety of modeling frameworks have been proposed for ionic polymer metal composites (IPMCs), but the physical underpinnings of their actuation remain elusive. A critical step toward the validation of existing theories and transition to engineering practice entails the design of new experimental paradigms that could support hypothesis-driven research. While several factors exacerbate the complexity of experimenting with IPMCs, the presence of the electrodes plays a major role by hindering the repeatability of the results and bringing a number of difficult-to-measure parameters into the picture. Here, we seek to address these experimental confounds by investigating contactless actuation of perfluorinated ionomer membranes in salt solution. In contrast to IPMCs that bend toward the anode in response to an applied voltage, ionomer membranes display a consistent deflection toward the cathode. Through hypothesis-driven experiments where the membrane width, solution concentration, and voltage applied across the electrodes are systematically varied, we elucidate electrochemistry and mechanics of contactless actuation. The applied voltage and solution concentration have a dominant role on the electrochemistry, while mechanics is mainly affected by the applied voltage and membrane width. Our results depict a complex scenario, which is expected to inform future theoretical inquiries about IPMC actuation.

| S-EPMC6700092 | biostudies-literature

Substrate Topography Guides Pore Morphology Evolution in Nanoporous Gold Thin Films.

Project description:This paper illustrates the effect of substrate topography on morphology evolution in nanoporous gold (np-Au) thin films. One micron-high silicon ridges with widths varying between 150 nm to 50 µm were fabricated and coated with 500 nm-thick np-Au films obtained by dealloying sputtered gold-silver alloy films. Analysis of scanning electron micrographs of the np-Au films following dealloying and thermal annealing revealed two distinct regimes where the ratio of film thickness to ridge width determines the morphological evolution of np-Au films.

| S-EPMC4587536 | biostudies-literature

Proton Conduction in Grain-Boundary-Free Oxygen-Deficient BaFeO2.5+δ Thin Films.

Project description:Reduction of the operating temperature to an intermediate temperature range between 350 °C and 600 °C is a necessity for Solid Oxide Fuel/Electrolysis Cells (SOFC/SOECs). In this respect the application of proton-conducting oxides has become a broad area of research. Materials that can conduct protons and electrons at the same time, to be used as electrode catalysts on the air electrode, are especially rare. In this article we report on the proton conduction in expitaxially grown BaFeO2.5+δ (BFO) thin films deposited by pulsed laser deposition on Nb:SrTiO₃ substrates. By using Electrochemical Impedance Spectroscopy (EIS) measurements under different wet and dry atmospheres, the bulk proton conductivity of BFO (between 200 °C and 300 °C) could be estimated for the first time (3.6 × 10-6 S cm-1 at 300 °C). The influence of oxidizing measurement atmosphere and hydration revealed a strong dependence of the conductivity, most notably at temperatures above 300 °C, which is in good agreement with the hydration behavior of BaFeO2.5 reported previously.

| S-EPMC5793550 | biostudies-literature

Evolution of Surface Morphology of Spin-Coated Poly(methyl methacrylate) Thin Films.

Project description:The morphology of sub-micron poly(methyl methacrylate) films coated to glass supports by spin coating from toluene is examined using surface profilometry. Wrinkled surfaces with local quasi-sinusoidal periodicity were seen on the surfaces of films with thicknesses of larger than 75 nm. The surface wrinkles had large aspect ratios with wavelengths in the tens of microns and amplitudes in the tens of nanometers. Wrinkles that formed during spin-coating are attributed to surface perturbations caused by Rayleigh-Bénard-Marangoni convective instabilities. The effects of film thickness, coating solution concentration, and drying rate on the thin film surface morphology are investigated. The results can be used to prepare surfaces with controlled morphology, either smooth or with periodic wrinkles.

| S-EPMC8271514 | biostudies-literature

Optical dispersion control in surfactant-free DNA thin films by vitamin B<sub>2</sub> doping.

Project description:A new route to systematically control the optical dispersion properties of surfactant-free deoxyribonucleic acid (DNA) thin solid films was developed by doping them with vitamin B2, also known as riboflavin. Surfactant-free DNA solid films of high optical quality were successfully deposited on various types of substrates by spin coating of aqueous solutions without additional chemical processes, with thicknesses ranging from 18 to 100 nm. Optical properties of the DNA films were investigated by measuring UV-visible-NIR transmission, and their refractive indices were measured using variable-angle spectroscopic ellipsometry. By doping DNA solid films with riboflavin, the refractive index was consistently increased with an index difference Δn ≥ 0.015 in the spectral range from 500 to 900 nm, which is sufficiently large to make an all-DNA optical waveguide. Detailed correlation between the optical dispersion and riboflavin concentration was experimentally investigated and thermo-optic coefficients of the DNA-riboflavin thin solid films were also experimentally measured in the temperature range from 20 to 85 °C, opening the potential to new bio-thermal sensing applications.

| S-EPMC6008429 | biostudies-literature

Thickness dispersion of surface plasmon of Ag nano-thin films: determination by ellipsometry iterated with transmittance method.

Project description:Effective optical constants of Ag thin films are precisely determined with effective thickness simultaneously by using an ellipsometry iterated with transmittance method. Unlike the bulk optical constants in Palik's database the effective optical constants of ultrathin Ag films are found to strongly depend on the thickness. According to the optical data two branches of thickness dispersion of surface plasmon energy are derived and agreed with theoretical predication. The thickness dispersion of bulk plasmon is also observed. The influence of substrate on surface plasmon is verified for the first time by using ellipsometry. The thickness dependent effective energy loss function is thus obtained based on this optical method for Ag ultrathin films. This method is also applicable to other ultrathin films and can be used to establish an effective optical database for ultrathin films.

| S-EPMC4369689 | biostudies-literature

Understanding nanodomain morphology formation in dip-coated PS-<i>b</i>-PEO thin films.

Project description:Block copolymer (BCP) thin films prepared by dip-coating are increasingly investigated, owing to the many promising application areas, the facility, and the industrial scalability of this technique. Yet, the effect of different dip-coating parameters on BCP nanostructure formation is still underdeveloped and the results of previous literature are limited to a few block copolymers. Here, we study the effect of the withdrawal rate and solvent selectivity on the morphology evolution of dip-coated polystyrene-b-poly(ethylene oxide) thin films by applying a wide range of dip-coating speeds and altering the volume ratio of the tetrahydrofuran-water solvent system. The dip-coated films were characterized using atomic force microscopy and ellipsometry. The nanodomain morphology, its feature sizes, its spanning, and the degree of ordering were investigated with regard to different dip-coating parameters. Notably, we have obtained a hexagonally packed BCP pattern with long-range order without the need for post-annealing processes. Overall, a solid understanding of the parameters affecting the formed surface patterns and their interplay was attained and explained, extending the knowledge of this field to more materials.

| S-EPMC9418883 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data