Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Mineral Carbonation of Biomass Ashes in Relation to Their CO₂ Capture and Storage Potential.

ABSTRACT: Short-term stored, long-term stored, and weathered biomass ashes (BAs) produced from eight biomass varieties were studied to define their composition, mineral carbonation, and CO₂ capture and storage (CCS) potential by a combination of methods. Most of these BAs are highly enriched in alkaline-earth and alkaline oxides, and the minerals responsible for CCS in them include carbonates such as calcite, kalicinite, and fairchildite, and to a lesser extent, butschliite and baylissite. These minerals are a result of reactions between alkaline-earth and alkaline oxyhydroxides in BA and flue CO₂ gas during biomass combustion and atmospheric CO₂ during BA storage and weathering. The mineral composition of the short-term stored, long-term stored, and weathered BAs is similar; however, there are increased proportions of carbonates and especially bicarbonates in the long-term stored BAs and particularly weathered BAs. The carbonation of BAs based on the measurement of CO₂ volatilization determined in fixed temperature ranges is approximately 1-27% (mean 11%) for short-term stored BAs, 2-33% (mean 18%) for long-term stored BAs, and 2-34% (mean 22%) for weathered BAs. Hence, biomass has some extra CCS potential because of sequestration of atmospheric CO₂ in BA, and the forthcoming industrial bioenergy production in a sustainable way can contribute for decreasing CO₂ emissions and can reduce the use of costly CCS technologies.

SUBMITTER: Vassilev SV

PROVIDER: S-EPMC8190880 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Real Time 3D Observations of Portland Cement Carbonation at CO2 Storage Conditions.

Project description:Depleted oil reservoirs are considered a viable solution to the global challenge of CO2 storage. A key concern is whether the wells can be suitably sealed with cement to hinder the escape of CO2. Under reservoir conditions, CO2 is in its supercritical state, and the high pressures and temperatures involved make real-time microscopic observations of cement degradation experimentally challenging. Here, we present an in situ 3D dynamic X-ray micro computed tomography (μ-CT) study of well cement carbonation at realistic reservoir stress, pore-pressure, and temperature conditions. The high-resolution time-lapse 3D images allow monitoring the progress of reaction fronts in Portland cement, including density changes, sample deformation, and mineral precipitation and dissolution. By switching between flow and nonflow conditions of CO2-saturated water through cement, we were able to delineate regimes dominated by calcium carbonate precipitation and dissolution. For the first time, we demonstrate experimentally the impact of the flow history on CO2 leakage risk for cement plugging. In-situ μ-CT experiments combined with geochemical modeling provide unique insight into the interactions between CO2 and cement, potentially helping in assessing the risks of CO2 storage in geological reservoirs.

| S-EPMC7467647 | biostudies-literature

Using Biomass Gasification Mineral Residue as Catalyst to Produce Light Olefins from CO, CO2 , and H2 Mixtures.

Project description:Gasification is a process to transform solids, such as agricultural and municipal waste, into gaseous feedstock for making transportation fuels. The so-called coarse solid residue (CSR) that remains after this conversion process is currently discarded as a process solid residue. In the context of transitioning from a linear to a circular society, the feasibility of using the solid process residue from waste gasification as a solid catalyst for light olefin production from CO, CO2 , and H2 mixtures was investigated. This CSR-derived catalyst converted biomass-derived syngas, a H2 -poor mixture of CO, CO2 , H2 , and N2 , into methane (57 %) and C2 -C4 olefins (43 %) at 450 °C and 20 bar. The main active ingredient of CSR was Fe, and it was discovered with operando X-ray diffraction that metallic Fe, present after pre-reduction in H2 , transformed into an Fe carbide phase under reaction conditions. The increased formation of Fe carbides correlated with an increase in CO conversion and olefin selectivity. The presence of alkali elements, such as Na and K, in CSR-derived catalyst increased olefin production as well.

| S-EPMC9314133 | biostudies-literature

Sequestration of Martian CO2 by mineral carbonation.

Project description:Carbonation is the water-mediated replacement of silicate minerals, such as olivine, by carbonate, and is commonplace in the Earth's crust. This reaction can remove significant quantities of CO2 from the atmosphere and store it over geological timescales. Here we present the first direct evidence for CO2 sequestration and storage on Mars by mineral carbonation. Electron beam imaging and analysis show that olivine and a plagioclase feldspar-rich mesostasis in the Lafayette meteorite have been replaced by carbonate. The susceptibility of olivine to replacement was enhanced by the presence of smectite veins along which CO2-rich fluids gained access to grain interiors. Lafayette was partially carbonated during the Amazonian, when liquid water was available intermittently and atmospheric CO2 concentrations were close to their present-day values. Earlier in Mars' history, when the planet had a much thicker atmosphere and an active hydrosphere, carbonation is likely to have been an effective mechanism for sequestration of CO2.

| S-EPMC4354006 | biostudies-literature

Computationally Designed 1,2,4-Triazolylidene-Derived N-Heterocyclic Olefins for CO2 Capture, Activation, and Storage.

Project description:In this article, triazolylidene-derived N-heterocyclic olefins (trNHOs) are designed using computational quantum tools, and their potential to promote CO2 sequestration is tested and discussed in detail. The low barrier heights related to the trNHO-mediated process indicate that the tailored compounds are very promising for fast CO2 sequestration. The systematic analysis of the presence of distinct substitutes at different N positions of the trNHO ring allows us to rationalize their effect on the carboxylation process and reveal the best N-substituted trNHO systems for CO2 sequestration and improved trNHO carboxylates for faster CO2 capture/release.

| S-EPMC6641026 | biostudies-literature

In situ carbonation of peridotite for CO2 storage

Project description:The rate of natural carbonation of tectonically exposed mantle peridotite during weathering and low-temperature alteration can be enhanced to develop a significant sink for atmospheric CO2. Natural carbonation of peridotite in the Samail ophiolite, an uplifted slice of oceanic crust and upper mantle in the Sultanate of Oman, is surprisingly rapid. Carbonate veins in mantle peridotite in Oman have an average 14C age of ?26,000 years, and are not 30–95 million years old as previously believed. These data and reconnaissance mapping show that ?104 to 105 tons per year of atmospheric CO2 are converted to solid carbonate minerals via peridotite weathering in Oman. Peridotite carbonation can be accelerated via drilling, hydraulic fracture, input of purified CO2 at elevated pressure, and, in particular, increased temperature at depth. After an initial heating step, CO2 pumped at 25 or 30 °C can be heated by exothermic carbonation reactions that sustain high temperature and rapid reaction rates at depth with little expenditure of energy. In situ carbonation of peridotite could consume >1 billion tons of CO2 per year in Oman alone, affording a low-cost, safe, and permanent method to capture and store atmospheric CO2.

| S-EPMC2582290 | biostudies-literature

The Application of Biochar for CO2 Capture: Influence of Biochar Preparation and CO2 Capture Reactors.

Project description:This work investigates three types of biochar (bamboo charcoal, wood pellet, and coconut shell) for postcombustion carbon capture. Each biochar is structurally modified through physical (H2O, CO2) and chemical (ZnCl2, KOH, H3PO4) activation to improve carbon capture performance. Three methods (CO2 adsorption isotherms, CO2 fixed-bed adsorption, and thermogravimetric analysis) are used to determine the CO2 adsorption capacity. The results show that a more than 2.35 mmol·g-1 (1 bar, 298 K) CO2 capture capacity was achieved using the activated biochar samples. It is also demonstrated that the CO2 capture performance by biochar depends on multiple surface and textural properties. A high surface area and pore volume of biochar resulted in an enhanced CO2 capture capacity. Furthermore, the O*/C ratio and pore width show a negative correlation with the CO2 capture capacity of biochars.

| S-EPMC10603783 | biostudies-literature

Evaluation of effective quantum yields of photosystem II for CO2 leakage monitoring in carbon capture and storage sites.

Project description:Vegetation monitoring can be used to detect CO2 leakage in carbon capture and storage (CCS) sites because it can monitor a large area at a relatively low cost. However, a rapidly responsive, sensitive, and cost-effective plant parameters must be suggested for vegetation monitoring to be practically utilized as a CCS management strategy. To screen the proper plant parameters for leakage monitoring, a greenhouse experiment was conducted by exposing kale (Brassica oleracea var. viridis), a sensitive plant, to 10%, 20%, and 40% soil CO2 concentrations. Water and water with CO2 stress treatments were also introduced to examine the parameters differentiating CO2 stress from water stresses. We tested the hypothesis that chlorophyl fluorescence parameters would be early and sensitive indicator to detect CO2 leakage. The results showed that the fluorescence parameters of effective quantum yield of photosystem II (Y(II)), detected the difference between CO2 treatments and control earlier than any other parameters, such as chlorophyl content, hyperspectral vegetation indices, and biomass. For systematic comparison among many parameters, we proposed an indicator evaluation score (IES) method based on four categories: CO2 specificity, early detection, field applicability, and cost. The IES results showed that fluorescence parameters (Y(II)) had the highest IES scores, and the parameters from spectral sensors (380-800 nm wavelength) had the second highest values. We suggest the IES system as a useful tool for evaluating new parameters in vegetation monitoring.

| S-EPMC7847708 | biostudies-literature

Multifunctional Carbon Aerogels with Hierarchical Anisotropic Structure Derived from Lignin and Cellulose Nanofibers for CO2 Capture and Energy Storage.

Project description:In current times, CO2 capture and lightweight energy storage are receiving significant attention and will be vital functions in next-generation materials. Porous carbonaceous materials have great potential in these areas, whereas most of the developed carbon materials still have significant limitations, such as nonrenewable resources, complex and costly processing, or the absence of tailorable structure. In this study, a new strategy is developed for using the currently underutilized lignin and cellulose nanofibers, which can be extracted from renewable resources to produce high-performance multifunctional carbon aerogels with a tailorable, anisotropic pore structure. Both the macro- and microstructure of the carbon aerogels can be simultaneously controlled by carefully tuning the weight ratio of lignin to cellulose nanofibers in the precursors, which considerably influences their final porosity and surface area. The designed carbon aerogels demonstrate excellent performance in both CO2 capture and capacitive energy storage, and the best results exhibit a CO2 adsorption capacity of 5.23 mmol g-1 at 273 K and 100 kPa and a specific electrical double-layer capacitance of 124 F g-1 at a current density of 0.2 A g-1, indicating that they have great future potential in the relevant applications.

| S-EPMC7307840 | biostudies-literature

Valorisation of agricultural biomass-ash with CO2.

Project description:This work is part of a study of different types of plant-based biomass to elucidate their capacity for valorisation via a managed carbonation step involving gaseous carbon dioxide (CO2). The perspectives for broader biomass waste valorisation was reviewed, followed by a proposed closed-loop process for the valorisation of wood in earlier works. The present work newly focusses on combining agricultural biomass with mineralised CO2. Here, the reactivity of selected agricultural biomass ashes with CO2 and their ability to be bound by mineralised carbonate in a hardened product is examined. Three categories of agricultural biomass residues, including shell, fibre and soft peel, were incinerated at 900 ± 25 °C. The biomass ashes were moistened (10% w/w) and moulded into cylindrical samples and exposed to 100% CO2 gas at 50% RH for 24 h, during which they cemented into hardened monolithic products. The calcia in ashes formed a negative relationship with ash yield and the microstructure of the carbonate-cementing phase was distinct and related to the particular biomass feedstock. This work shows that in common with woody biomass residues, carbonated agricultural biomass ash-based monoliths have potential as novel low-carbon construction products.

| S-EPMC7429819 | biostudies-literature

Rational synthesis of microporous carbons for enhanced post-combustion CO2 capture via non-hydroxide activation of air carbonised biomass.

Project description:This work explores the use of a less corrosive activating agent, potassium oxalate (PO), in combination with difficult to activate carbonaceous matter for the preparation of activated carbons. The design of the study allowed a fuller understanding of the workings of PO compared to hydroxide (KOH) activation, and also optimised the preparation of highly microporous carbons with exceptional CO2 storage capacity under low pressure (≤1 bar) conditions at ambient temperature. The PO activated carbons have a surface area of up to 1760 m2 g-1 and are highly microporous with virtually all of the surface area arising from micropores. The porosity of the PO activated carbons can be readily tailored towards having pores of size 6-8 Å, which are highly suited for CO2 storage at low pressure (i.e., post-combustion capture). At 25 °C, the PO activated carbons can store up to 1.8 and 5.0 mmol g-1 of CO2 at 0.15 bar and 1 bar, respectively. On the other hand, KOH activated carbons reach a higher surface area of up to 2700 m2 g-1, and store up to 1.0 and 4.0 mmol g-1 of CO2. This work demonstrates that PO may be used as a mild, less corrosive and less toxic activating agent for the rational and targeted synthesis of biomass-derived activated carbons with tailored porosity. The targeted synthesis may be aided by careful selection of the biomass starting material as guided by the O/C ratio of the biomass.

| S-EPMC9275833 | biostudies-literature