Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Carbon Dioxide Tornado-Type Atmospheric-Pressure-Plasma-Jet-Processed rGO-SnO₂ Nanocomposites for Symmetric Supercapacitors.

ABSTRACT: Pastes containing reduced graphene oxide (rGO) and SnCl₂ solution were screen printed on carbon cloth and then calcined using a CO₂ tornado-type atmospheric-pressure plasma jet (APPJ). The tornado circulation of the plasma gas enhances the mixing of the reactive plasma species and thus ensures better reaction uniformity. Scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS) were performed to characterize the synthesized rGO-SnO₂ nanocomposites on carbon cloth. After CO₂ tornado-type APPJ treatment, the pastes were converted into rGO-SnO₂ nanocomposites for use as the active electrode materials of polyvinyl alcohol (PVA)-H₂SO₄ gel-electrolyte flexible supercapacitors (SCs). Various APPJ scanning times were tested to obtain SCs with optimized performance. With seven APPJ scans, the SC achieved the best areal capacitance of 37.17 mF/cm² in Galvanostatic charging/discharging (GCD) and a capacitance retention rate of 84.2% after 10,000-cycle cyclic voltammetry (CV) tests. The capacitance contribution ratio, calculated as pseudocapacitance/electrical double layer capacitance (PC/EDLC), is ~50/50 as analyzed by the Trasatti method. GCD data were also analyzed to obtain Ragone plots; these indicated an energy density comparable to those of SCs processed using a fixed-point nitrogen APPJ in our previous study.

SUBMITTER: Chang JH

PROVIDER: S-EPMC8197281 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

High-performance symmetric supercapacitors based on carbon nanotube/graphite nanofiber nanocomposites.

Project description:This work reports the nanocomposites of graphitic nanofibers (GNFs) and carbon nanotubes (CNTs) as the electrode material for supercapacitors. The hybrid CNTs/GNFs was prepared via a synthesis route that involved catalytic chemical vapor deposition (CVD) method. The structure and morphology of CNTs/GNFs can be precisely controlled by adjusting the flow rates of reactant gases. The nest shape entanglement of CNTs and GNFs which could not only have high conductivity to facilitate ion transmission, but could also increase surface area for more electrolyte ions access. When assembled in a symmetric two-electrode system, the CNTs/GNFs-based supercapacitor showed a very good cycling stability of 96% after 10 000 charge/discharge cycles. Moreover, CNTs/GNFs-based symmetric device can deliver a maximum specific energy of 72.2 Wh kg-1 at a power density of 686.0 W kg-1. The high performance of the hybrid performance can be attributed to the wheat like GNFs which provide sufficient accessible sites for charge storage, and the CNTs skeleton which provide channels for charge transport.

| S-EPMC5998012 | biostudies-literature

Ultrafast Fabrication of H2SO4, LiCl, and Li2SO4 Gel Electrolyte Supercapacitors with Reduced Graphene Oxide (rGO)-LiMnOx Electrodes Processed Using Atmospheric-Pressure Plasma Jet.

Project description:Pastes containing reduced graphene oxide (rGO) and LiCl-Mn(NO3)2·4H2O are screen-printed on a carbon cloth substrate and then calcined using a nitrogen atmospheric-pressure plasma jet (APPJ) for conversion into rGO-LiMnOx nanocomposites. The APPJ processing time is within 300 s. RGO-LiMnOx on carbon cloth is used to sandwich H2SO4, LiCl, or Li2SO4 gel electrolytes to form hybrid supercapacitors (HSCs). The areal capacitance, energy density, and cycling stability of the HSCs are evaluated using electrochemical measurement. The HSC utilizing the Li2SO4 gel electrolyte exhibits enhanced electrode-electrolyte interface reactions and increased effective surface area due to its high pseudocapacitance (PC) ratio and lithium ion migration rate. As a result, it demonstrates the highest areal capacitance and energy density. The coupling of charges generated by embedded lithium ions with the electric double-layer capacitance (EDLC) further contributed to the significant overall capacitance enhancement. Conversely, the HSC with the H2SO4 gel electrolyte exhibits better cycling stability. Our findings shed light on the interplay between gel electrolytes and electrode materials, offering insights into the design and optimization of high-performance HSCs.

| S-EPMC10535643 | biostudies-literature

Free-Standing rGO-CNT Nanocomposites with Excellent Rate Capability and Cycling Stability for Na2SO4 Aqueous Electrolyte Supercapacitors.

Project description:Facing the increasing demand for various renewable energy storage devices and wearable and portable energy storage systems, the research on electrode materials with low costs and high energy densities has attracted great attention. Herein, free-standing rGO-CNT nanocomposites have been successfully synthesized by a facile hydrothermal method, in which the hierarchical porous network nanostructure is synergistically assembled by rGO nanosheets and CNT with interlaced network distribution. The rGO-CNT composite electrodes with synergistic enhancement of rGO and CNT exhibit high specific capacitance, excellent rate capability, exceptional conductivity and outstanding long-term cycling stability, especially for the optimal rGO-CNT30 electrode. Applied to a symmetric supercapacitor systems (SSS) assembled with an rGO-CNT30 electrode and with 1 M Na2SO4 aqueous solution as the electrolyte, the SSS possesses a high energy density of 12.29 W h kg-1 and an outstanding cycling stability, with 91.42% of initial specific capacitance after 18,000 cycles. Results from these electrochemical properties suggest that the rGO-CNT30 nanocomposite electrode is a promising candidate for the development of flexible and lightweight high-performance supercapacitors.

| S-EPMC8229913 | biostudies-literature

Iron-selenide-based titanium dioxide nanocomposites as a novel electrode material for asymmetric supercapacitors operating at 2.3 V.

Project description:This study portrays a facile wet-chemical synthesis of FeSe2/TiO2 nanocomposites for the first time for advanced asymmetric supercapacitor (SC) energy storage applications. Two different composites were prepared with varying ratios of TiO2 (90 and 60%, symbolized as KT-1 and KT-2) and their electrochemical properties were investigated to obtain an optimized performance. The electrochemical properties showed excellent energy storage performance owing to faradaic redox reactions from Fe2+/Fe3+ while TiO2 due to Ti3+/Ti4+ with high reversibility. Three-electrode designs in aqueous solutions showed a superlative capacitive performance, with KT-2 performing better (high capacitance and fastest charge kinetics). The superior capacitive performance drew our attention to further employing the KT-2 as a positive electrode to fabricate an asymmetric faradaic SC (KT-2//AC), exceeding exceptional energy storage performance after applying a wider voltage of 2.3 V in an aqueous solution. The constructed KT-2/AC faradaic SCs significantly improved electrochemical parameters such as capacitance of 95 F g-1, specific energy (69.79 Wh kg-1), and specific power delivery of 11529 W kg-1. Additionally, extremely outstanding durability was maintained after long-term cycling and rate performance. These fascinating findings manifest the promising feature of iron-based selenide nanocomposites, which can be effective electrode materials for next-generation high-performance SCs.

| S-EPMC9972855 | biostudies-literature

Highly Conductive In-SnO2/RGO Nano-Heterostructures with Improved Lithium-Ion Battery Performance.

Project description:The increasing demand of emerging technologies for high energy density electrochemical storage has led many researchers to look for alternative anode materials to graphite. The most promising conversion and alloying materials do not yet possess acceptable cycle life or rate capability. In this work, we use tin oxide, SnO2, as a representative anode material to explore the influence of graphene incorporation and In-doping to increase the electronic conductivity and concomitantly improve capacity retention and cycle life. It was found that the incorporation of In into SnO2 reduces the charge transfer resistance during cycling, prolonging life. It is also hypothesized that the increased conductivity allows the tin oxide conversion and alloying reactions to both be reversible, leading to very high capacity near 1200?mAh/g. Finally, the electrodes show excellent rate capability with a capacity of over 200?mAh/g at 10C.

| S-EPMC4863165 | biostudies-literature

Superior field emission properties of layered WS2-RGO nanocomposites.

Project description:We report here the field emission studies of a layered WS2-RGO composite at the base pressure of ~1 × 10(-8) mbar. The turn on field required to draw a field emission current density of 1 ?A/cm(2) is found to be 3.5, 2.3 and 2 V/?m for WS2, RGO and the WS2-RGO composite respectively. The enhanced field emission behavior observed for the WS2-RGO nanocomposite is attributed to a high field enhancement factor of 2978, which is associated with the surface protrusions of the single-to-few layer thick sheets of the nanocomposite. The highest current density of ~800 ?A/cm(2) is drawn at an applied field of 4.1 V/?m from a few layers of the WS2-RGO nanocomposite. Furthermore, first-principles density functional calculations suggest that the enhanced field emission may also be due to an overalp of the electronic structures of WS2 and RGO, where graphene-like states are dumped in the region of the WS2 fundamental gap.

| S-EPMC3836036 | biostudies-literature

Zn- and Ti-Doped SnO2 for Enhanced Electroreduction of Carbon Dioxide.

Project description:The electrocatalytic reduction of CO2 into useful fuels, exploiting rationally designed, inexpensive, active, and selective catalysts, produced through easy, quick, and scalable routes, represents a promising approach to face today's climate challenges and energy crisis. This work presents a facile strategy for the preparation of doped SnO2 as an efficient electrocatalyst for the CO2 reduction reaction to formic acid and carbon monoxide. Zn or Ti doping was introduced into a mesoporous SnO2 matrix via wet impregnation and atomic layer deposition. It was found that doping of SnO2 generates an increased amount of oxygen vacancies, which are believed to contribute to the CO2 conversion efficiency, and among others, Zn wet impregnation resulted the most efficient process, as confirmed by X-ray photoelectron spectroscopy analysis. Electrochemical characterization and active surface area evaluation show an increase of availability of surface active sites. In particular, the introduction of Zn elemental doping results in enhanced performance for formic acid formation, in comparison to un-doped SnO2 and other doped SnO2 catalysts. At -0.99 V versus reversible hydrogen electrode, the total faradaic efficiency for CO2 conversion reaches 80%, while the partial current density is 10.3 mA cm-2. These represent a 10% and a threefold increases for faradaic efficiency and current density, respectively, with respect to the reference un-doped sample. The enhancement of these characteristics relates to the improved charge transfer and conductivity with respect to bare SnO2.

| S-EPMC8125724 | biostudies-literature

Atmospheric Pressure Microwave Plasma Jet for Organic Thin Film Deposition.

Project description:In this work, the potential of a microwave (MW)-induced atmospheric pressure plasma jet (APPJ) in film deposition of styrene and methyl methacrylate (MMA) precursors is investigated. Plasma properties during the deposition and resultant coating characteristics are studied. Optical emission spectroscopy (OES) results indicate a higher degree of monomer dissociation in the APPJ with increasing power and a carrier gas flow rate of up to 250 standard cubic centimeters per minute (sccm). Computational fluid dynamic (CFD) simulations demonstrate non-uniform monomer distribution near the substrate and the dependency of the deposition area on the monomer-containing gas flow rate. A non-homogeneous surface morphology and topography of the deposited coatings is also observed using atomic force microscopy (AFM) and SEM. Coating chemical analysis and wettability are studied by XPS and water contact angle (WCA), respectively. A lower monomer flow rate was found to result in a higher C-O/C-C ratio and a higher wettability of the deposited coatings.

| S-EPMC7077475 | biostudies-literature

Ultrahigh Energy and Power Densities of d-MXene-Based Symmetric Supercapacitors.

Project description:Here, rational design electrodes are fabricated by mixing MXene with an aqueous solution of chloroauric acid (HAuCl4). In order to prevent MXene from self-restacking, the groups of -OH on the surface of Ti3C2Tx nanosheets underwent a one-step simultaneous self-reduction from AuCl4-, generating spaces for rapid ion transit. Additionally, by using this procedure, MXene's surface oxidation can be decreased while preserving its physio-chemical properties. The interlayered MX/Au NPs that have been obtained are combined into a conducting network structure that offers more active electrochemical sites and improved mass transfer at the electrode-electrolyte interface, both of which promote quick electron transfer during electrochemical reactions and excellent structural durability. The Ti3C2Tx-AuNPs film thus demonstrated a rate performance that was preferable to that of pure Ti3C2Tx film. According to the results of the characterization, the AuNPs effectively adorn the MXene nanosheets. Due to the renowned pseudocapacitance charge storage mechanism, MXene-based electrode materials also work well as supercapacitors in sulfuric acid, which is why MXene AuNPs electrodes have been tested in 3 M and 1 M H2SO4. The symmetric supercapacitors made of MXene and AuNPs have shown exceptional specific capacitance of 696.67 Fg-1 at 5 mVs-1 in 3 M H2SO4 electrolyte, and they can sustain 90% of their original capacitance for 5000 cycles. The highest energy and power density of this device, which operates within a 1.2 V potential window, are 138.4 Wh kg-1 and 2076 W kg-1, respectively. These findings offer a productive method for creating high-performance metal oxide-based symmetric capacitors and a straightforward, workable approach for improving MXene-based electrode designs, which can be applied to other electro-chemical systems that are ion transport-restricted, such as metal ion batteries and catalysis.

| S-EPMC9565486 | biostudies-literature

Facile synthesis of NiCo2S4/CNTs nanocomposites for high-performance supercapacitors.

Project description:Herein, porous NiCo2S4/CNTs nanocomposites were synthesized via a simple hydrothermal method followed by the sulphurization process using different sulfide sources. By comparing two different sulfur sources, the samples using thioacetamide as sulfide source delivered more remarkable electrochemical performance with a high specific capacitance of 1765 F g-1 at 1 A g-1 and an admirable cycling stability with capacitance retention of 71.7% at a high current density of 10 A g-1 after 5000 cycles in 2 M KOH aqueous electrolyte. Furthermore, an asymmetric supercapacitor (ASC) device was successfully fabricated with the NiCo2S4/CNTs electrode as the positive electrode and graphene as the negative electrode. The device provided a maximum energy density of 29.44 W h kg-1 at a power density of 812 W kg-1. Even at a high power density of 8006 W kg-1, the energy density still reaches 16.68 W h kg-1. Moreover, the ASC presents 89.8% specific capacitance retention after 5000 cycles at 5 A g-1. These results reveal its great potential for supercapacitors in electrochemical energy storage field.

| S-EPMC6170541 | biostudies-literature