Functionalisable Epoxy-rich Electrospun Fibres Based on Renewable Terpene for Multi-Purpose Applications.
Ontology highlight
ABSTRACT:
SUBMITTER: Montanari U
PROVIDER: S-EPMC8198691 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:A double-network strategy to toughen epoxy resin system is presented herein. Dihydrocoumarin (DHC), a hexatomic compound extracted from tonka bean, is used as the building block for the construction of the first network, and the diglycidyl ether of bisphenol A epoxy matrix is used as the second network. The resultant double network demonstrates a single glass transition and good compatibility between these two networks. Owing to the firm interfacial adhesion between networks and the effective stress transfer as well as external energy absorption derived from the DHC-based network, the double-network-based epoxy resin shows a significant toughness improvement without trade-offs in the tensile strength and elongation at break. The finding in this study provides a promising way to overcome the intrinsic brittleness of commercial epoxy resin via the utilization of renewable DHC for the construction of a novel double network.
| S-EPMC6777077 | biostudies-literature
Project description:ObjectivesAmongst the fourth generation of PHAs is bio-plasticpoly3-hydroxybutyrate4-hydroxybutyrate (P34HB); it is thus appropriate to perform novel research on its uses and applications. The main objective of this study was to determine whether electrospun P34HB fibres would accommodate viability, growth and differentiation of mouse adipose-derived stem cells (mASCs).Materials and methodsIn the present study, we looked at P34HB in two forms, electrospun P34HB fibres and P34HB film. Morphology of electrospun P34HB fibres and P34HB film were characterized using scanning electron microscopy, fluorescence microscopy and confocal laser scanning microscopy, after cell seeding. Cell adhesion, proliferation and cytotoxicity tests were conducted on both by MTT and CCK-8 assays, respectively. After being cultured with osteogenic induction, expression of adipogenic genes Runx2, OPN and OCN, were examined by real-time PCR.ResultsBy scanning electron microscopy, light microscopy and confocal laser scanning microscopy, we observed that the mASCs grew well associated with the P34HB materials. After MTT and CCK-8 assay, we concluded that P34HB would, indeed, be a material suitable for further cell adhesion and proliferation studies. More importantly, we found that the P34HB matrices promoted expression of Runx2, OPN and OCN with osteogenic induction.ConclusionsIn this investigation, we can confirm that the electrospun P34HB fibres accommodated survival, proliferation and differentiation of mASCs, and we have been able to draw the conclusion that fibre scaffolds produced by the electrospinning process are promising for application of bone tissue engineering.
| S-EPMC6495184 | biostudies-literature
Project description:Many bacteria become progressively more resistant to antibiotics and it remains a challenging task to control their overall levels. Polymers combined with active biomolecules come to the forefront for the design of antibacterial materials that can address this encounter. In this work, we investigated the photo-crosslinking approach of UV-sensitive benzophenone molecule (BP) with polyvinylpyrrolidone (PVP) polymer within electrospun fibres. The BP and PVP solutions allowed fabricating polymer mats that were subsequently functionalised with antibacterial lysozyme. The physical properties of the crosslinked electrospun fibres were investigated by scanning electron microscopy and atomic force microscopy. The average diameter of the obtained fibres decreased from 290 ± 50 nm to 270 ± 70 nm upon the addition of the crosslinking molecules and then to 240 ± 80 nm and 180 ± 90 nm after subsequent crosslinking reaction at an increasing time: 3 and 5 h, respectively. The peak force quantitative nanomechanical mapping (PF-QNM) indicated the increase of DMT modulus of obtained cross-linked fibres from 4.1 ± 0.8 GPa to 7.2 ± 0.5 GPa. Furthermore, the successful crosslinking reaction of PVP and BP solution into hydrogels was investigated in terms of examining photo-crosslinking mechanism and was confirmed by rheology, Raman, Fourier transform infrared and nuclear magnetic resonance. Finally, lysozyme was successfully encapsulated within cross-linked PVP-BP hydrogels and these were successfully electrospun into mats which were found to be as effective antibacterial agents as pure lysozyme molecules. The dissolution rate of photo cross-linked PVP mats was observed to increase in comparison to pure PVP electrospun mats which opened a potential route for their use as antibacterial, on-demand, dissolvable coatings for various biomedical applications.
| S-EPMC6818115 | biostudies-literature
Project description:The need for an excellent antibacterial material that is sufficiently powerful to never develop bacterial resistance is urgent. In this study, a series of novel polyacrylonitrile-based fibres with chelated Ag ions (referred to as Ag-SH-PANF) were prepared by a two-step chemical modification process: grafting and chelating. The properties of the as-prepared Ag-SH-PANF were characterized by Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The antibacterial activities of Ag-SH-PANF were examined against pathogenic bacteria, and an antibacterial mechanism was explicated based on the release of Ag ions from the fibres' surfaces. The results showed that, although chelation occurred between the Ag ions and the grafted amino, sulfhydryl and disulfide groups, Ag-SH-PANF retained its fine microstructure and thermal stability. Moreover, Ag-SH-PANF displayed excellent antibacterial ability against pathogenic bacteria as well as good washing durability. In terms of the antibacterial mechanism, Ag ions are the main bactericidal agents in the role of catalysts and are not consumed in the antibacterial process. Nonetheless, a relatively higher concentration of Ag ions can accelerate the bactericidal process.
| S-EPMC7428276 | biostudies-literature
Project description:Crosslinking of an unsaturated aliphatic polyester poly(globalide) (PGl) by bistriazolinediones (bisTADs) is reported. First, a monofunctional model compound, phenyl-TAD (PTAD), was tested for PGl functionalisation. 1H-NMR showed that PTAD-ene reaction was highly efficient with conversions up to 97%. Subsequently, hexamethylene bisTAD (HM-bisTAD) and methylene diphenyl bisTAD (MDP-bisTAD) were used to crosslink electrospun PGl fibres via one- and two-step approaches. In the one-step approach, PGl fibres were collected in a bisTAD solution for in situ crosslinking, which resulted in incomplete crosslinking. In the two-step approach, a light crosslinking of fibres was first achieved in a PGl non-solvent. Subsequent incubation in a fibre swelling bisTAD solution resulted in fully amorphous crosslinked fibres. SEM analysis revealed that the fibres' morphology was uncompromised by the crosslinking. A significant increase of tensile strength from 0.3 ± 0.08 MPa to 2.7 ± 0.8 MPa and 3.9 ± 0.5 MPa was observed when PGI fibres were crosslinked by HM-bisTAD and MDP-bisTAD, respectively. The reported methodology allows the design of electrospun fibres from biocompatible polyesters and the modulation of their mechanical and thermal properties. It also opens future opportunities for drug delivery applications by selected drug loading.
| S-EPMC6918174 | biostudies-literature
Project description:Polylactic electrospun porous fibres have been widely used in tissue engineering scaffolds. However, the application of linear polylactic is limited due to its poor hydrophilicity, which leads to phase separation and has been seldom used in porous fibre preparation. Instead, branching polylactic acts as a new effective method to prepare porous fibres because it can increase polylactic polar property and make it easy to be formulated in the following application. In the current study, we prepared an ultra-high molecular weight of high branching polylactic with glycerol as the initiator by controlling the ring-opening polymerization time, adding amount of catalyst and glycerol. The structure, molecular weight and thermal properties of copolymers were tested subsequently. The result showed that the surface of the high branching polylactic films is smooth, hydrophilic and porous. This branching polylactic formed electrospun porous fibres and possessed a strong adsorption of silver ion. Our study provided a simple and efficient way to synthesize branching polylactic polymer and prepare electrospun porous fibres, which may provide potential applications in the field of biomaterials for tissue engineering or antibacterial dressing compared with the application of linear polylactic and 3-arm polylactic materials.
| S-EPMC6170545 | biostudies-literature
Project description:A novel method based on selective laser sintering (SLS) process is proposed for the first time to prepare complex and high-performance carbon fibres/polyamide12/epoxy (CF/PA12/EP) ternary composites. The procedures are briefly described as follows: prepare polyamide12 (PA12) coated carbon fibre (CF) composite powder; build porous green parts by SLS; infiltrate the green parts with high-performance thermosetting epoxy (EP) resin; and finally cure the resin at high temperature. The obtained composites are a ternary composite system consisting of the matrix of novolac EP resin, the reinforcement of CFs and the transition thin layer of PA12 with a thickness of 595 nm. The SEM images and micro-CT analysis prove that the ternary system is a three-dimensional co-continuous structure and the reinforcement of CFs are well dispersed in the matrix of EP with the volume fraction of 31%. Mechanical tests show that the composites fabricated by this method yield an ultimate tensile strength of 101.03 MPa and a flexural strength of 153.43 MPa, which are higher than those of most of the previously reported SLS materials. Therefore, the process proposed in this paper shows great potential for manufacturing complex, lightweight and high-performance CF reinforced composite components in aerospace, automotive industries and other areas.
| S-EPMC5030666 | biostudies-literature
Project description:Wound dressings are high performance and high value products which can improve the regeneration of damaged skin. In these products, bioresorption and biocompatibility play a key role. The aim of this study is to provide progress in this area via nanofabrication and antimicrobial natural materials. Polyhydroxyalkanoates (PHAs) are a bio-based family of polymers that possess high biocompatibility and skin regenerative properties. In this study, a blend of poly(3-hydroxybutyrate) (P(3HB)) and poly(3-hydroxyoctanoate-co-3-hydroxy decanoate) (P(3HO-co-3HD)) was electrospun into P(3HB))/P(3HO-co-3HD) nanofibers to obtain materials with a high surface area and good handling performance. The nanofibers were then modified with silver nanoparticles (AgNPs) via the dip-coating method. The silver-containing nanofiber meshes showed good cytocompatibility and interesting immunomodulatory properties in vitro, together with the capability of stimulating the human beta defensin 2 and cytokeratin expression in human keratinocytes (HaCaT cells), which makes them promising materials for wound dressing applications.
| S-EPMC8434271 | biostudies-literature
Project description:Electrospinning is a widely used technology for obtaining nanofibers from synthetic and natural polymers. In this study, electrospun mats from collagen (C), polyethylene terephthalate (PET) and a blend of the two (C-PET) were prepared and stabilized through a cross-linking process. The aim of this research was to prepare and characterize the nanofiber structure by Fourier-transform infrared with attenuated total reflectance spectroscopy (FTIR-ATR) in close correlation with dynamic vapor sorption (DVS). The studies indicated that C-PET nanofibrous mats shows improved mechanical properties compared to collagen samples. A correlation between morphological, structural and cytotoxic proprieties of the studied samples were emphasized and the results suggest that the prepared nanofiber mats could be a promising candidate for tissue-engineering applications, especially dermal applications.
| S-EPMC7559754 | biostudies-literature
Project description:Effective therapeutic strategies to precisely eradicate primary tumors with minimal side effects on normal tissue, inhibit metastases, and prevent tumor relapses, are the ultimate goals in the battle against cancer. We report a novel therapeutic strategy that combines adjuvant black phosphorus nanoparticle-based photoacoustic (PA) therapy with checkpoint-blockade immunotherapy. With the mitochondria targeting nanoparticle, PA therapy can achieve localized mechanical damage of mitochondria via PA cavitation and thus achieve precise eradication of the primary tumor. More importantly, PA therapy can generate tumor-associated antigens via the presence of the R848-containing nanoparticles as an adjuvant to promote strong antitumor immune responses. When combined with the checkpoint-blockade using anti-cytotoxic T-lymphocyte antigen-4, the generated immunological responses will further promote the infiltrating CD8 and CD4 T-cells to increase the CD8/Foxp3 T-cell ratio to inhibit the growth of distant tumors beyond the direct impact range of the PA therapy. Furthermore, the number of memory T cells detected in the spleen is increased, and these cells inhibit tumor recurrence. This proposed strategy offers precise eradication of the primary tumor and can induce long-term tumor-specific immunity.Electronic supplementary materialSupplementary material is available for this article at 10.1007/s12274-020-3028-x and is accessible for authorized users.
| S-EPMC7455780 | biostudies-literature