Advanced Exergy Analysis for a Novel Gasoline Absorption-Stabilization Process.
Ontology highlight
ABSTRACT:
SUBMITTER: Lei Y
PROVIDER: S-EPMC8210431 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Today?s engineering systems and machine are so sophisticated that mere energy analysis cannot accurately and reliably describe the thermodynamic behaviour, viz-a-viz the energy changes occurring in these complex systems. Hence, a more efficient and realistic parameter that provides us with useful information about thermodynamic losses and energy efficiency improvement potential is the exergy analyses. Fresh samples of onion fruits were washed with distilled water to remove particles and contaminants that can adversely affect the experimental results. Hence, 36.50?g of the sample at different thicknesses of 0.50?cm, 1.00?cm and 1.50?cm were taken into the cabinet dryer for drying at different temperatures of 65?°C, 75?°C,85?°C and 95?°C and the weight loss at each temperature and thickness was determined with the aid of a digital weighing balance. Hence, it was on this premise that the exergy analyses in terms of exergy loss, exergetic improvement potential and exergetic sustainability index of drying process of onion at different drying air temperatures, drying periods and thicknesses in a cabinet dryer was performed.
| S-EPMC6251333 | biostudies-literature
Project description:Dimethyl carbonate is an important green chemical that has been widely used in the chemical industry. In the production of dimethyl carbonate, methanol oxidative carbonylation has been studied, but the conversion ratio of dimethyl carbonate using this method is too low, and the subsequent separation requires a large amount of energy due to methanol and dimethyl carbonate being azeotrope. In this paper, the strategy of “reaction instead of separation” is proposed. Based on this strategy, a novel process is developed to combine the production of DMC with that of dimethoxymethane (DMM) and dimethyl ether (DME). The co-production process was simulated using Aspen Plus software, and the product purity was up to 99.9%. The exergy analysis of the co-production process and the existing process was carried out. The exergy destruction and exergy efficiency were compared with those of the existing production processes. The results show that the exergy destruction of the co-production process is about 276% less than that of the single-production processes, and the exergy efficiencies in the developed co-production process are significantly improved. The utility loads of the co-production process are significantly lower than that of the single-production process. The developed co-production process increases the methanol conversion ratio to 95%, with a reduced energy requirement. It is proved that the developed co-production process can provide an advantageous option over the existing processes with improved energy efficiency and material savings. The strategy of “reaction instead of separation” is feasible. A new strategy is proposed for azeotrope separation.
| S-EPMC9601992 | biostudies-literature
Project description:In a fire investigation the rapid detection of the presence of ignitable liquids like gasoline is of great importance as it allows appropriate treatment of the remains, the identification of prevention methods and detects the possible presence of an arsonist. In some cases, analysts cannot access the fire scene in the first few hours due to the dangers involved in the situation and, as a consequence, phenomena such as weathering start. Ignitable liquid weathering is an evaporation process that results in an increase in the abundance of non-volatile compounds relative to volatile compounds, and this process changes the chemical composition. In the present work, the weathering of samples of gasoline at different times (from 0 h to a month) has been studied using an electronic nose (eNose). The influence of the volume used (40 µL and 80 µL) and the type of support (cork, wood, paper and cotton sheet) has been studied. Chemometric tools have been used with the aim of ascertaining the weathering time for which the developed method is capable of detecting the presence of gasoline. The eNose was able to discriminate samples of weathered gasoline. The support used for the samples did not seem to have an influence on the detection and the system.
| S-EPMC5795821 | biostudies-other
Project description:This paper explains a thorough exergy analysis of the most important reactions in soil-plant interactions. Soil, which is a prime mover of gases, metals, structural crystals, and electrolytes, constantly resembles an electric field of charge and discharge. The second law of thermodynamics reflects the deterioration of resources through the destruction of exergy. In this study, we developed a new method to assess the exergy of soil and plant formation processes. Depending on the types of soil, one may assess the efficiency and degradation of resources by incorporating or using biomass storage. According to the results of this study, during different processes from the mineralization process to nutrient uptake by the plant, about 62.5% of the input exergy will be destroyed because of the soil solution reactions. Most of the exergy destruction occurs in the biota-atmosphere subsystem, especially in the photosynthesis reaction, due to its low efficiency (about 15%). Humus and protonation reactions, with 14% and 13% exergy destruction, respectively, are the most exergy destroying reactions. Respiratory, weathering, and reverse weathering reactions account for the lowest percentage of exergy destruction and less than one percent of total exergy destruction in the soil system. The total exergy yield of the soil system is estimated at about 37.45%.
| S-EPMC7822430 | biostudies-literature
Project description:A huge amount of energy is consumed during sugar production in the food industry. The large amount of steam used and the power of the turbine power plant are key factors. This makes energy and exergy analysis important in sugar factories. The data given in the following paper are related to input and output information of the paper entitled Energy - exergy analysis and optimisation of a model sugar factory in Turkey by Taner and Sivrioglu (2015) [1]. Factory total energy efficiency and exergy efficiency are found to be ? enT=72.2% and ? exT=37.4%, respectively, and according to these results, the total energy quality ? T=0.64. These results indicate higher efficiency than similar studies (Vuckovic et al., 2014; Pellegrini and Oliviera Junior, 2011; Deshmukh et al., 2013; Palacios-Bereche et al., 2015) [2], [3], [4], [5]. This study can be a model for these similar factories by Taner and Sivrioglu (2015) [1].
| S-EPMC4773381 | biostudies-literature
Project description:The study of the viability of hydrogen production as a sustainable energy source is a current challenge, to satisfy the great world energy demand. There are several techniques to produce hydrogen, either mature or under development. The election of the hydrogen production method will have a high impact on practical sustainability of the hydrogen economy. An important profile for the viability of a process is the calculation of energy and exergy efficiencies, as well as their overall integration into the circular economy. To carry out theoretical energy and exergy analyses we have estimated proposed hydrogen production using different software (DWSIM and MATLAB) and reference conditions. The analysis consolidates methane reforming or auto-thermal reforming as the viable technologies at the present state of the art, with reasonable energy and exergy efficiencies, but pending on the impact of environmental constraints as CO2 emission countermeasures. However, natural gas or electrolysis show very promising results, and should be advanced in their technological and maturity scaling. Electrolysis shows a very good exergy efficiency due to the fact that electricity itself is a high exergy source. Pyrolysis exergy loses are mostly in the form of solid carbon material, which has a very high integration potential into the hydrogen economy.
| S-EPMC7712718 | biostudies-literature
Project description:The potential for encapsulating RNA within tunable, semi-permeable structures for storage and transportation purposes offers an interesting approach to the reduction of stringent storage requirements that often hamper the field application of genetic analysis methods. In this study, we assessed the potential for application of functionalized, porous silicate sorbents in maintaining nucleic acid integrity. Mesoporous silica nanoparticles (MSNs) with and without incorporated stabilizing reagents were used to encapsulate triosephosphate isomerase mRNA of Arabidopsis thaliana. The absorption, elution, and the long-term stability of the RNA were monitored by using quantitative real-time RT-PCR. The results indicate that adsorbed RNA can be eluted from the sorbents using simple buffers and employed directly for downstream molecular diagnostic assays without any further processing. RNA integrity can be maintained for extended time periods under refrigeration temperatures in the presence of covalently immobilized stabilizing compounds. This study provides initial evidence of the potential for application of MSNs in transportation and storage. They may also have utility in sample collection and processing in restrictive environments.
| S-EPMC3511576 | biostudies-literature
Project description:Heparins show great anticoagulant effect with few side effects, and are administered by subcutaneous or intravenous route in clinics. To improve patient compliance, oral administration is an alternative route. Nonetheless, oral administration of heparins still faces enormous challenges due to the multiple obstacles. This review briefly analyzes a series of barriers ranging from poorly physicochemical properties of heparins, to harsh biological barriers including gastrointestinal degradation and pre-systemic metabolism. Moreover, several approaches have been developed to overcome these obstacles, such as improving stability of heparins in the gastrointestinal tract, enhancing the intestinal epithelia permeability and facilitating lymphatic delivery of heparins. Overall, this review aims to provide insights concerning advanced delivery strategies facilitating oral absorption of heparins.
| S-EPMC7486512 | biostudies-literature
Project description:Two novel routes for the production of gasoline from pyrolysis oil (from timber pine) and biogas (from ley grass) are simulated, followed by a cradle-to-gate life-cycle assessment of the two production routes. The main aim of this work is to conduct a holistic evaluation of the proposed routes and benchmark them against the conventional route of producing gasoline from natural gas. A previously commercialized method of synthesizing gasoline involves conversion of natural gas to syngas, which is further converted to methanol, and then as a last step, the methanol is converted to gasoline. In the new proposed routes, the syngas production step is different; syngas is produced from a mixture of pyrolysis oil and biogas in the following two ways: (i) autothermal reforming of pyrolysis oil and biogas, in which there are two reactions in one reactor (ATR) and (ii) steam reforming of pyrolysis oil and catalytic partial oxidation of biogas, in which there are separated but thermally coupled reactions and reactors (CR). The other two steps to produce methanol from syngas, and gasoline from methanol, remain the same. The purpose of this simulation is to have an ex-ante comparison of the performance of the new routes against a reference, in terms of energy and sustainability. Thus, at this stage of simulations, nonrigorous, equilibrium-based models have been used for reactors, which will give the best case conversions for each step. For the conventional production route, conversion and yield data available in the literature have been used, wherever available.The results of the process design showed that the second method (separate, but thermally coupled reforming) has a carbon efficiency of 0.53, compared to the conventional route (0.48), as well as the first route (0.40). The life-cycle assessment results revealed that the newly proposed processes have a clear advantage over the conventional process in some categories, particularly the global warming potential and primary energy demand; but there are also some in which the conventional route fares better, such as the human toxicity potential and the categories related to land-use change such as biotic production potential and the groundwater resistance indicator. The results confirmed that even though using biomass such as timber pine as raw material does result in reduced greenhouse gas emissions, the activities associated with biomass, such as cultivation and harvesting, contribute to the environmental footprint, particularly the land use change categories. This gives an impetus to investigate the potential of agricultural, forest, or even food waste, which would be likely to have a substantially lower impact on the environment. Moreover, it could be seen that the source of electricity used in the process has a major impact on the environmental performance.
| S-EPMC5384482 | biostudies-literature
Project description:Proteins can be destabilized by a number of environmental factors such as temperature, pH, and mutation. The ability to subsequently restore function under these conditions by adding small molecule stabilizers, or by introducing disulfide bonds, would be a very powerful tool, but the physical principles that drive this stabilization are not well understood. The first problem lies is in choosing an appropriate binding site or disulfide bond location to best confer stability to the active site and restore function. Here, we present a general framework for predicting which allosteric binding sites correlate with stability in the active site. Using the Karanicolas-Brooks G?-like model, we examine the dynamics of the enzyme ?-glucuronidase using an Umbrella Sampling method to thoroughly sample the conformational landscape. Each intramolecular contact is assigned a score termed a "stabilization factor" that measures its correlation with structural changes in the active site. We have carried out this analysis for three different scaling strengths for the intramolecular contacts, and we examine how the calculated stabilization factors depend on the ensemble of destabilized conformations. We further examine a locally destabilized mutant of ?-glucuronidase that has been characterized experimentally, and show that this brings about local changes in the stabilization factors. We find that the proximity to the active site is not sufficient to determine which contacts can confer active site stability. © 2016 Wiley Periodicals, Inc.
| S-EPMC5403592 | biostudies-literature