Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effective Poly (Cyclotriphosphazene-Co-4,4'-Sulfonyldiphenol)@rGO Sheets for Tetracycline Adsorption: Fabrication, Characterization, Adsorption Kinetics and Thermodynamics.

ABSTRACT: The development of excellent drug adsorbents and clarifying the interaction mechanisms between adsorbents and adsorbates are greatly desired for a clean environment. Herein, we report that a reduced graphene oxide modified sheeted polyphosphazene (rGO/poly (cyclotriphosphazene-co-4,4'-sulfonyldiphenol)) defined as PZS on rGO was used to remove the tetracycline (TC) drug from an aqueous solution. Compared to PZS microspheres, the adsorption capacity of sheeted PZS@rGO exhibited a high adsorption capacity of 496 mg/g. The adsorption equilibrium data well obeyed the Langmuir isotherm model, and the kinetics isotherm was fitted to the pseudo-second-order model. Thermodynamic analysis showed that the adsorption of TC was an exothermic, spontaneous process. Furthermore, we highlighted the importance of the surface modification of PZS by the introduction of rGO, which tremendously increased the surface area necessary for high adsorption. Along with high surface area, electrostatic attractions, H-bonding, π-π stacking and Lewis acid-base interactions were involved in the high adsorption capacity of PZS@rGO. Furthermore, we also proposed the mechanism of TC adsorption via PZS@rGO.

SUBMITTER: Ahmad M

PROVIDER: S-EPMC8230582 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Thermodynamics and Kinetics of Pretilachlor Adsorption on Organobentonites for Controlled Release.

Project description:Thermodynamics and kinetics of pretilachlor adsorption on organobentonites modified with hexadecyltrimethyl ammonium chloride were investigated to reveal the structural effects of organobentonites on the interaction with pretilachlor and the diffusion of the herbicide and were related to the controlled release from organobentonites. The adsorption of pretilachlor was entropically driven by hydrophobic interaction. The entropy change dropped with increasing surfactant loading from 0.4 to 1.50 times the cation exchange capacity (CEC) of the bentonite used, corresponding to a decrease in the degree of freedom of pretilachlor molecules due to the enhanced order of surfactant in the interlayer. The kinetics of pretilachlor adsorption was well fitted to the pseudo-second-order model and related to the structural features of organobentonites. The enhanced packing density of the surfactant in the interlayer generally resulted in a reduction of the rate constant of the pretilachlor adsorption onto organobentonites. However, the stepwise increase in the basal spacing due to the surfactant arrangement transition, from lateral-monolayer to lateral-bilayer at a loading level of more than 0.8 × CEC, benefited the diffusion of pretilachlor and diminished the influence of the increase in surfactant packing density. The release of pretilachlor from organobentonites was predominated by Fickian diffusion, which could be understood from the adsorption thermodynamics and kinetics. The time taken for the release of 50% of active ingredient was 16-23 times that for the control formulation and exhibited a linear increase with the relative value of the equilibrium constant to the rate constant of pretilachlor adsorption.

| S-EPMC7057691 | biostudies-literature

Adsorption of Tetracycline by Shrimp Shell Waste from Aqueous Solutions: Adsorption Isotherm, Kinetics Modeling, and Mechanism.

Project description:The highly efficient removal of tetracycline (TC) from an aqueous solution was accomplished by using the raw shrimp shell waste (SSW) as an environmentally friendly adsorbent. The SSW without any treatment removed TC more efficiently than the SSW after being treated with HCl and NaOH solutions. The SSW was characterized using nitrogen adsorption-desorption isotherms, scanning electron microscopy alongside energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, a thermogravimetric-derivative thermogravimetry analyzer, and a ?-potential analyzer. The maximum adsorption capacity of 400 mg/L SSW was 229.98 mg/g for 36 h at 55 °C. Both the Langmuir isotherm model and the pseudo-second-order kinetic model well described the experimental data. According to the values of the Gibbs free energy and enthalpy changes, the TC adsorption by SSW proved to be spontaneous and endothermic. The TC adsorption process was controlled by intraparticle diffusion and liquid film diffusion.

| S-EPMC7045497 | biostudies-literature

Study of Humic Acid Adsorption Character on Natural Maifan Stone: Characterization, Kinetics, Adsorption Isotherm, and Thermodynamics.

Project description:In this paper, the adsorption of humic acid (HA) on natural maifan stone (MS) in aqueous medium was investigated. The changes in MS after adsorption have been characterized explicitly. The adsorption behavior was studied by varying the factors of pH (5-10), reaction time (10-180 min), initial HA concentration (5-50 mg/L), adsorbent dosage (0.1-1.2 g), and temperature (25-45 °C). The kinetics of the adsorption process of HA was fitted well with the pseudo-second-order model (R 2 = 0.99). The isothermal results revealed that the adsorption process is favorable, and highly fitting Langmuir models (R 2 > 0.99) were used. Additionally, the obtained maximum adsorption capacity of MS for HA was approximately 1 mg/g. The adsorption process of HA onto MS was endothermic according to the thermodynamic study. The changes in the excitation-emission-matrix of HA and the X-ray diffraction of MS after adsorption indicate the interaction of HA and MS. However, the reason for these changes is still unclear. Thus, the results show that the natural MS exhibited a certain adsorption capacity for HA. It is promising to develop novel natural MS-based materials for adsorption of HA.

| S-EPMC7144149 | biostudies-literature

Adsorption of Crystal Violet onto an Agricultural Waste Residue: Kinetics, Isotherm, Thermodynamics, and Mechanism of Adsorption.

Project description:Agricultural waste can be exploited for the adsorption of dyes, due to their low cost, availability, cost-effectiveness, and efficiency. In this study, we were interested in the elimination of crystal violet dye, from aqueous solutions, by adsorption on almond shell-based material, as a low-cost and ecofriendly adsorbent. The almond shells were first analyzed by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction; then, the influence of adsorbent dose, initial dye concentration time, and pH were studied to assess adsorption capacity under optimal experimental conditions. Experimental results indicate that almond shell adsorbent removes about 83% of the dye from the solutions at room temperature and in batch mode; the kinetic study showed that the equilibrium time is about 90?min, and the model of pseudo-second order could very well describe adsorption kinetics. The modulation of adsorption isotherms showed that retention follows the Langmuir model. The thermodynamic study has shown that the adsorption is endothermic (?H°?>?0) and spontaneous (?G°?<?0).

| S-EPMC7211253 | biostudies-literature

Adsorption Thermodynamics and Kinetics of Resin for Metal Impurities in Bis(2-hydroxyethyl) Terephthalate.

Project description:Adsorption of heavy metals from degraded of Polyethylene terephthalate (PET) products by strong cation exchange resin AmberliteIR-120 under optimized conditions toward the selectivity removal of metals are in the following order: Al3+ > Zn2+ > Mg2+ > Fe2+ > Ni2+. Therefore, kinetic and adsorption isotherm models were applied for fitting experimental data. Comparatively, adsorption isotherm study revealed that Langmuir isotherm model better fits adsorption on surface of resin over than the Freundlich model. In summary, AmberliteIR-120 strong acid cation exchange resin can be used as an efficient adsorbent for heavy metals removal from depolymerized products bis(2-hydroxyethyl) terephthalate.

| S-EPMC7761184 | biostudies-literature

Kinetics and Thermodynamics Studies for Cadmium (II) Adsorption onto Functionalized Chitosan with Hexa-Decyl-Trimethyl-Ammonium Chloride.

Project description:A new adsorbent material was obtained by functionalization of chitosan with hexa-decyl-trimethyl-ammonium chloride and tested as an adsorbent for Cd(II) ions. Functionalization is due to the desire to improve the adsorbent properties of the biopolymer used for removal of metallic ions. Obtained material was characterized by FTIR (Fourier Transform InfraRed spectroscopy), SEM (Scanning Electron Microscopy) and EDX (Energy dispersive X-ray Spectroscopy). To prove the Cd(II) adsorption mechanism, we performed adsorption tests determining influence of biopolymer ratio, pH, contact time, temperature and Cd(II) initial concentration. Obtained experimental data were modeled using two kinetics models: pseudo-first-order and pseudo-second-order models. Cd(II) adsorption kinetics was better described by pseudo-second-order model. Further, experimental data were fitted using three different adsorption isotherms: Langmuir, Freundlich and Sips. The studied adsorption process is well described by the Sips adsorption isotherm, when the maximum adsorption capacity value is near the experimental one. Likewise, we evaluated the values of thermodynamic parameters which indicate that the studied process is an endothermic and spontaneous one, being a physical adsorption. Prepared adsorbent materials have a maximum adsorption capacity of 204.3 mg Cd2+ per gram at pH > 4.0 and 298 K. In addition, this material was reused for Cd2+ recovery for 20 times.

| S-EPMC7730077 | biostudies-literature

Fabrication of MNPs/rGO/PMMA Composite for the Removal of Hazardous Cr(VI) from Tannery Wastewater through Batch and Continuous Mode Adsorption.

Project description:Herein, we report the synthesis of magnetic nanoparticle (MNP)-reduced graphene oxide (rGO) and polymethylmethacrylate (PMMA) composite (MNPs/rGO/PMMA) as adsorbent via an in situ fabrication strategy and, in turn, the application for adsorptive removal and recovery of Cr(VI) from tannery wastewater. The composite material was characterized via XRD, FTIR and SEM analyses. Under batch mode experiments, the composite achieved maximum adsorption of the Cr(VI) ion (99.53 ± 1.4%, i.e., 1636.49 mg of Cr(VI)/150 mg of adsorbent) at pH 2, adsorbent dose of 150 mg/10 mL of solution and 30 min of contact time. The adsorption process was endothermic, feasible and spontaneous and followed a pseudo-2nd order kinetic model. The Cr ions were completely desorbed (99.32 ± 2%) from the composite using 30 mL of NaOH solution (2M); hence, the composite exhibited high efficiency for five consecutive cycles without prominent loss in activity. The adsorbent was washed with distilled water and diluted HCl (0.1M), then dried under vacuum at 60 °C for reuse. The XRD analysis confirmed the synthesis and incorporation of magnetic iron oxide at 2θ of 30.38°, 35.5°, 43.22° and 57.36°, respectively, and graphene oxide (GO) at 25.5°. The FTIR analysids revealed that the composite retained the configurations of the individual components, whereas the SEM analysis indicated that the magnetic Fe3O4-NPs (MNPs) dispersed on the surface of the PMMA/rGO sheets. To anticipate the behavior of breakthrough, the Thomas and Yoon-Nelson models were applied to fixed-bed column data, which indicated good agreement with the experimental data. This study evaluates useful reference information for designing a cost-effective and easy-to-use adsorbent for the efficient removal of Cr(VI) from wastewater. Therefore, it can be envisioned as an alternative approach for a variety of unexplored industrial-level operations.

| S-EPMC8620348 | biostudies-literature

Adsorption Capacities of Iron Hydroxide for Arsenate and Arsenite Removal from Water by Chemical Coagulation: Kinetics, Thermodynamics and Equilibrium Studies.

Project description:Arsenic (As)-laden wastewater may pose a threat to biodiversity when released into soil and water bodies without treatment. The current study investigated the sorption properties of both As(III, V) oxyanions onto iron hydroxide (FHO) by chemical coagulation. The potential mechanisms were identified using the adsorption models, ζ-potential, X-ray diffraction (XRD) and Fourier Transform Infrared Spectrometry (FT-IR) analysis. The results indicate that the sorption kinetics of pentavalent and trivalent As species closely followed the pseudo-second-order model, and the adsorption rates of both toxicants were remarkably governed by pH as well as the quantity of FHO in suspension. Notably, the FHO formation was directly related to the amount of ferric chloride (FC) coagulant added in the solution. The sorption isotherm results show a better maximum sorption capacity for pentavalent As ions than trivalent species, with the same amount of FHO in the suspensions. The thermodynamic study suggests that the sorption process was spontaneously exothermic with increased randomness. The ζ-potential, FT-IR and XRD analyses confirm that a strong Fe-O bond with As(V) and the closeness of the surface potential of the bonded complex to the point of zero charge (pHzpc) resulted in the higher adsorption affinity of pentavalent As species than trivalent ions in most aquatic conditions. Moreover, the presence of sulfates, phosphates, and humic and salicylic acid significantly affected the As(III, V) sorption performance by altering the surface properties of Fe precipitates. The combined effect of charge neutralization, complexation, oxidation and multilayer chemisorption was identified as a major removal mechanism. These findings may provide some understanding regarding the fate, transport and adsorption properties onto FHO of As oxyanions in a complex water environment.

| S-EPMC8624347 | biostudies-literature

Studies on Kinetics, Isotherms, Thermodynamics and Adsorption Mechanism of Methylene Blue by N and S Co-Doped Porous Carbon Spheres.

Project description:Heteroatom-doped carbon is widely used in the fields of adsorbents, electrode materials and catalysts due to its excellent physicochemical properties. N and S co-doped porous carbon spheres (N,S-PCSs) were synthesized using glucose and L-cysteine as carbon and heteroatom sources using a combined hydrothermal and KOH activation process. The physicochemical structures and single-factor methylene blue (MB) adsorption properties of the N,S-PCSs were then studied. The optimized N,S-PCSs-1 possessed a perfect spherical morphology with a 2-8-μm diameter and a large specific area of 1769.41 m2 g-1, in which the N and S contents were 2.97 at% and 0.88 at%, respectively. In the single-factor adsorption experiment for MB, the MB adsorption rate increased with an increase in carbon dosage and MB initial concentration, and the adsorption reached equilibrium within 2-3 h. The pseudo-second-order kinetic model could excellently fit the experimental data with a high R2 (0.9999). The Langmuir isothermal adsorption equation fitted well with the experimental results with an R2 value of 0.9618, and the MB maximum adsorption quantity was 909.10 mg g-1. The adsorption of MB by N,S-PCSs-1 was a spontaneous, endothermic, and random process based on the thermodynamics analyses. The adsorption mechanism mainly involved Van der Waals force adsorption, π-π stacking, hydrogen bonds and Lewis acid-base interactions.

| S-EPMC8308386 | biostudies-literature

Kinetics and thermodynamics of membrane protein folding.

Project description:Understanding protein folding has been one of the great challenges in biochemistry and molecular biophysics. Over the past 50 years, many thermodynamic and kinetic studies have been performed addressing the stability of globular proteins. In comparison, advances in the membrane protein folding field lag far behind. Although membrane proteins constitute about a third of the proteins encoded in known genomes, stability studies on membrane proteins have been impaired due to experimental limitations. Furthermore, no systematic experimental strategies are available for folding these biomolecules in vitro. Common denaturing agents such as chaotropes usually do not work on helical membrane proteins, and ionic detergents have been successful denaturants only in few cases. Refolding a membrane protein seems to be a craftsman work, which is relatively straightforward for transmembrane ?-barrel proteins but challenging for ?-helical membrane proteins. Additional complexities emerge in multidomain membrane proteins, data interpretation being one of the most critical. In this review, we will describe some recent efforts in understanding the folding mechanism of membrane proteins that have been reversibly refolded allowing both thermodynamic and kinetic analysis. This information will be discussed in the context of current paradigms in the protein folding field.

| S-EPMC4030980 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data