Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effect of Atmospheric-Pressure Plasma Treatments on Fracture Toughness of Carbon Fibers-Reinforced Composites.

ABSTRACT: In this study, nano-scale fillers are added to epoxy matrix-based carbon fibers-reinforced composites (CFRPs) to improve the mechanical properties of multi-scale composites. Single-walled carbon nanotubes (SWCNTs) used as nano-scale fillers are treated with atmospheric-pressure plasma to introduce oxygen functional groups on the fillers' surface to increase the surface free energy and polar component, which relates to the mechanical properties of multi-scale composites. In addition, the effect of dispersibility was analyzed through the fracture surfaces of multi-scale composites containing atmospheric-pressure plasma-treated SWCNTs (P-SWCNTs) under high load conditions. The fillers content has an optimum weight percent load at 0.5 wt.% and the fracture toughness (K_IC) method is used to demonstrate an improvement in mechanical properties. Here, K_IC was calculated by three equations based on different models and we analyzed the correlation between mechanical properties and surface treatment. Compared to the composites of untreated SWCNTs, the K_IC value is improved by 23.7%, suggesting improved mechanical properties by introducing selective functional groups through surface control technology to improve interfacial interactions within multi-scale composites.

SUBMITTER: Kim WJ

PROVIDER: S-EPMC8233790 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Bone-inspired enhanced fracture toughness of de novo fiber reinforced composites.

Project description:Amplification in toughness and balance with stiffness and strength are fundamental characteristics of biological structural composites, and a long sought-after objective for engineering design. Nature achieves these properties through a combination of multiscale key features. Yet, emulating all these features into synthetic de novo materials is rather challenging. Here, we fine-tune manual lamination, to implement a newly designed bone-inspired structure into fiber-reinforced composites. An integrated approach, combining numerical simulations, ad hoc manufacturing techniques, and testing, yields a novel composite with enhanced fracture toughness and balance with stiffness and strength, offering an optimal lightweight material solution with better performance than conventional materials such as metals and alloys. The results also show how the new design significantly boosts the fracture toughness compared to a classic laminated composite, made of the same building blocks, also offering an optimal tradeoff with stiffness and strength. The predominant mechanism, responsible for the enhancement of fracture toughness in the new material, is the continuous deviation of the crack from a straight path, promoting large energy dissipation and preventing a catastrophic failure. The new insights resulting from this study can guide the design of de novo fiber-reinforced composites toward better mechanical performance to reach the level of synergy of their natural counterparts.

| S-EPMC6395722 | biostudies-literature

On the Residual Stresses and Fracture Toughness of Glass/Carbon Epoxy Composites.

Project description:The resistance to delamination in polymer composite depends on their constituents, manufacturing process, environmental factors, specimen geometry, and loading conditions. The manufacturing of laminated composites is usually carried out at an elevated temperature, which induces thermal stresses in composites mainly due to a mismatch in the coefficient of thermal expansion (CTE) of fiber and matrix. This work aims to investigate the effect of these process-induced stresses on mode-I interlaminar fracture toughness (GI) of Glass-Carbon-Epoxy (GCE) and Glass-Epoxy (GE) composites. These composites are prepared using a manual layup technique and cured under room temperature, followed by post-curing using different curing conditions. Double cantilever beam (DCB) specimens were used to determine GI experimentally. The slitting technique was used to estimate residual stresses (longitudinal and transverse direction of crack growth) inherited in cured composites and the impact of these stresses on GI was investigated. Delaminated surfaces of composites were examined using a scanning electron microscopy (SEM) to investigate the effect of post-curing on the mode-I failure mechanism. It was found that GI of both GE and GEC composites are sensitive to the state of residual stress in the laminas. The increase in the GI of laminates can also be attributed to an increase in matrix deformation and fiber-matrix interfacial bond with the increase in post-curing temperature.

| S-EPMC9609049 | biostudies-literature

Radiation and electrostatic resistance for ultra-stable polymer composites reinforced with carbon fibers.

Project description:Future space travel needs ultra-lightweight and robust structural materials that can withstand extreme conditions with multiple entry points to orbit to ensure mission reliability. This is unattainable with current inorganic materials. Ultra-highly stable carbon fiber reinforced polymers (CFRPs) have shown susceptibility to environmental instabilities and electrostatic discharge, thereby limiting the full lightweight potential of CFRP. A more robust and improved CFRP is needed in order to improve space travel and structural engineering further. Here, we address these challenges and present a superlattice nano-barrier-enhanced CFRP with a density of ~3.18 g/cm3 that blends within the mechanical properties of the CFRP, thus becoming part of the composite itself. We demonstrate composites with enhanced radiation resistance coupled with electrical conductivity (3.2 × 10-8 ohm⋅m), while ensuring ultra-dimensionally stable physical properties even after temperature cycles from 77 to 573 K.

| S-EPMC10022895 | biostudies-literature

Graphene reinforced carbon fibers.

Project description:The superlative strength-to-weight ratio of carbon fibers (CFs) can substantially reduce vehicle weight and improve energy efficiency. However, most CFs are derived from costly polyacrylonitrile (PAN), which limits their widespread adoption in the automotive industry. Extensive efforts to produce CFs from low cost, alternative precursor materials have failed to yield a commercially viable product. Here, we revisit PAN to study its conversion chemistry and microstructure evolution, which might provide clues for the design of low-cost CFs. We demonstrate that a small amount of graphene can minimize porosity/defects and reinforce PAN-based CFs. Our experimental results show that 0.075 weight % graphene-reinforced PAN/graphene composite CFs exhibits 225% increase in strength and 184% enhancement in Young's modulus compared to PAN CFs. Atomistic ReaxFF and large-scale molecular dynamics simulations jointly elucidate the ability of graphene to modify the microstructure by promoting favorable edge chemistry and polymer chain alignment.

| S-EPMC7182419 | biostudies-literature

Rapid and Continuous Atmospheric Plasma Surface Modification of PAN-Based Carbon Fibers.

Project description:In this work, a continuous and rapid atmospheric plasma setup was developed for rapidly modifying the surface of PAN-based carbon fibers (CFs). The interlaminar shear strength (ILSS) of CFs increased from 64.9 to 80.0 MPa with 60 s plasma treatment. Further mechanical and surface structural characterizations revealed that the effect of plasma was different, depending on the treatment time. When the treatment time was lower than 15 s, the effect of plasma was mainly on physically etching the surface of CFs, and the ILSS of CFs increased rapidly. Further extending the plasma treatment time did not increase surface roughness but promoted the addition of oxygen-containing functional groups on the surface of CFs, corresponding to a slower growth rate of ILSS. The atmospheric plasma was generated via a dielectric barrier discharge (DBD) method, and its energy intensity was significantly lower than that of plasma generated under low pressure. Accordingly, a mechanism was proposed for the plasma treatment of CFs: atmospheric plasma was not strong enough to simultaneously etch all the carbon atoms on the surface of CFs; therefore, carbon atoms on the graphitic plane were selectively etched, followed by the attaching of oxygen-containing functional groups on the exposed carbon sites caused by etching.

| S-EPMC8991902 | biostudies-literature

Effect of Ambient Plasma Treatments on Thermal Conductivity and Fracture Toughness of Boron Nitride Nanosheets/Epoxy Nanocomposites.

Project description:With the rapid growth in the miniaturization and integration of modern electronics, the dissipation of heat that would otherwise degrade the device efficiency and lifetime is a continuing challenge. In this respect, boron nitride nanosheets (BNNS) are of significant attraction as fillers for high thermal conductivity nanocomposites due to their high thermal stability, electrical insulation, and relatively high coefficient of thermal conductivity. Herein, the ambient plasma treatment of BNNS (PBNNS) for various treatment times is described for use as a reinforcement in epoxy nanocomposites. The PBNNS-loaded epoxy nanocomposites are successfully manufactured in order to investigate the thermal conductivity and fracture toughness. The results indicate that the PBNNS/epoxy nanocomposites subjected to 7 min plasma treatment exhibit the highest thermal conductivity and fracture toughness, with enhancements of 44 and 110%, respectively, compared to the neat nanocomposites. With these enhancements, the increases in surface free energy and wettability of the PBNNS/epoxy nanocomposites are shown to be attributable to the enhanced interfacial adhesion between the filler and matrix. It is demonstrated that the ambient plasma treatments enable the development of highly dispersed conductive networks in the PBNNS epoxy system.

| S-EPMC9823992 | biostudies-literature

Self-Sensing Properties of Alkali Activated Blast Furnace Slag (BFS) Composites Reinforced with Carbon Fibers.

Project description:In recent years, several researchers have shown the good performance of alkali activated slag cement and concretes. Besides their good mechanical properties and durability, this type of cement is a good alternative to Portland cements if sustainability is considered. Moreover, multifunctional cement composites have been developed in the last decades for their functional applications (self-sensing, EMI shielding, self-heating, etc.). In this study, the strain and damage sensing possible application of carbon fiber reinforced alkali activated slag pastes has been evaluated. Cement pastes with 0, 0.29 and 0.58 vol % carbon fiber addition were prepared. Both carbon fiber dosages showed sensing properties. For strain sensing, function gage factors of up to 661 were calculated for compressive cycles. Furthermore, all composites with carbon fibers suffered a sudden increase in their resistivity when internal damages began, prior to any external signal of damage. Hence, this material may be suitable as strain or damage sensor.

| S-EPMC5452839 | biostudies-other

Effect of Atmospheric Pressure Plasma Jet Treatments on Magnesium Phosphate Cements: Performance, Characterization, and Applications.

Project description:Atmospheric pressure plasma treatments are nowadays gaining importance to improve the performance of biomaterials in the orthopedic field. Among those, magnesium phosphate-based cements (MPCs) have recently shown attractive features as bone repair materials. The effect of plasma treatments on such cements, which has not been investigated so far, could represent an innovative strategy to modify MPCs' physicochemical properties and to tune their interaction with cells. MPCs were prepared and treated for 5, 7.5, and 10 min with a cold atmospheric pressure plasma jet. The reactive nitrogen and oxygen species formed during the treatment were characterized. The surfaces of MPCs were studied in terms of the phase composition, morphology, and topography. After a preliminary test in simulated body fluid, the proliferation, adhesion, and osteogenic differentiation of human mesenchymal cells on MPCs were assessed. Plasma treatments induce modifications in the relative amounts of struvite, newberyite, and farringtonite on the surfaces on MPCs in a time-dependent fashion. Nonetheless, all investigated scaffolds show a good biocompatibility and cell adhesion, also supporting osteogenic differentiation of mesenchymal cells.

| S-EPMC10716815 | biostudies-literature

Acoustic, Mechanical and Thermal Properties of Green Composites Reinforced with Natural Fibers Waste.

Project description:The use of acoustic panels is one of the most important methods for sound insulation in buildings. Moreover, it has become increasingly important to use green/natural origin materials in this area to reduce environmental impact. This study focuses on the investigation of acoustic, mechanical and thermal properties of natural fiber waste reinforced green epoxy composites. Three different types of fiber wastes were used, e.g., cotton, coconut and sugarcane with epoxy as the resin. Different fiber volume fractions, i.e., 10%, 15% and 20% for each fiber were used with a composite thickness of 3 mm. The sound absorption coefficient, impact strength, flexural strength, thermal conductivity, diffusivity, coefficient of thermal expansion and thermogravimetric properties of all samples were investigated. It has been found that by increasing the fiber content, the sound absorption coefficient also increases. The coconut fiber-based composites show a higher sound absorption coefficient than in the other fiber-reinforced composites. The impact and flexural strength of the cotton fiber-reinforced composite samples are higher than in other samples. The coefficient of thermal expansion of the cotton fiber-based composite is also higher than the other composites. Thermogravimetric analysis revealed that all the natural fiber-reinforced composites can sustain till 300 °C with a minor weight loss. The natural fiber-based composites can be used in building interiors, automotive body parts and household furniture. Such composite development is an ecofriendly approach to the acoustic world.

| S-EPMC7183085 | biostudies-literature

Toughness of carbon nanotubes conforms to classic fracture mechanics.

Project description:Defects in crystalline structure are commonly believed to degrade the ideal strength of carbon nanotubes. However, the fracture mechanisms induced by such defects, as well as the validity of solid mechanics theories at the nanoscale, are still under debate. We show that the fracture toughness of single-walled nanotubes (SWNTs) conforms to the classic theory of fracture mechanics, even for the smallest possible vacancy defect (~2 Å). By simulating tension of SWNTs containing common types of defects, we demonstrate how stress concentration at the defect boundary leads to brittle (unstable) fracturing at a relatively low strain, degrading the ideal strength of SWNTs by up to 60%. We find that, owing to the SWNT's truss-like structure, defects at this scale are not sharp and stress concentrations are finite and low. Moreover, stress concentration, a geometric property at the macroscale, is interrelated with the SWNT fracture toughness, a material property. The resulting SWNT fracture toughness is 2.7 MPa m(0.5), typical of moderately brittle materials and applicable also to graphene.

| S-EPMC4788477 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data