Browse
Submit Data
Databases
API
Help

Dataset Information

6 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Comparison of Surface Properties of Sepiolite and Palygorskite: Surface Energy and Nanoroughness.

ABSTRACT: The surface properties of two sepiolite samples and one palygorskite sample were compared using inverse gas chromatography (IGC). Samples were previously conditioned at appropriate temperatures for the removal of all zeolitic water. Dispersive (or Lifshitz-van der Waals) component of the surface energy (γ_s^d), specific interactions (-ΔG_a^s) with π electron donor bases (1-alkenes), and nanomorphology indices (IMχT) based on the injections of cycloalkanes and a branched alkane were measured. From IGC data, at 240 °C, it was found that the palygorskite was clearly distinguished from the sepiolites. The palygorskite possessed a lower γ_s^d, larger -ΔG_a^s with 1-alkenes, and remarkably higher IMχT. Slight differences could also be observed between the two sepiolite samples with the same origin. The results were rationalized in terms of the structural features of the two studied minerals. The larger channels of the sepiolite allow for a better insertion of the n-alkanes (longer retention times) while excluding the bulkier probes, such as cyclooctane or 2,2,4-trimethylpentane. Accordingly, the corresponding γ_s^d values were larger and the IMχT values were lower (higher surface nanoroughness) for the sepiolites. Regarding Lewis acid-base properties, all the sample's surfaces evidenced a very strong amphoteric character. The present results highlight the potential of the evaluated samples for, e.g., adsorption processes with volatile organic compounds or matrix-filler interactions regarding the production of composite structures with Lewis acid-base matrices.

SUBMITTER: Almeida R

PROVIDER: S-EPMC8235428 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Sepiolite Nanocarriers as a Matrix for Controlled Thermal Energy Storage.

Project description:Applying the eutectic hydrated salt (EHS) mixture of Na2HPO4·12H2O and Na2SO4·10H2O in a 1:1 weight ratio as a phase-change material and natural sepiolite nanocarriers as a matrix, the form-stable phase-change composite EHS@sepiolite was fabricated by vacuum impregnation. Due to the high porosity of sepiolite and its nanofibrous structure with internal channels, the effective loading of the phase-change material reached as high as 88 wt %. The melting temperature of the composite was 38.1 °C and its melting enthalpy was 185 J g-1. The crystallinity of the hydrated salt mixture was retained after loading into the sepiolite matrix. The composite demonstrated high stability over 50 heat uptake/release cycles maintaining its melting temperature and melting enthalpy the same. The combination of natural sepiolite nanocarriers and crystallohydrates is a cheap and efficient nanoscale energy storage system with high potential for practical applications and upscaling because of their natural abundance.

| S-EPMC8495839 | biostudies-literature

Rapid comparison of properties on protein surface.

Project description:The mapping of physicochemical characteristics onto the surface of a protein provides crucial insights into its function and evolution. This information can be further used in the characterization and identification of similarities within protein surface regions. We propose a novel method which quantitatively compares global and local properties on the protein surface. We have tested the method on comparison of electrostatic potentials and hydrophobicity. The method is based on 3D Zernike descriptors, which provides a compact representation of a given property defined on a protein surface. Compactness and rotational invariance of this descriptor enable fast comparison suitable for database searches. The usefulness of this method is exemplified by studying several protein families including globins, thermophilic and mesophilic proteins, and active sites of TIM beta/alpha barrel proteins. In all the cases studied, the descriptor is able to cluster proteins into functionally relevant groups. The proposed approach can also be easily extended to other surface properties. This protein surface-based approach will add a new way of viewing and comparing proteins to conventional methods, which compare proteins in terms of their primary sequence or tertiary structure.

| S-EPMC2574582 | biostudies-literature

Calculation on surface energy and electronic properties of CoS2.

Project description:Density functional theory was employed to investigate the (111), (200), (210), (211) and (220) surfaces of CoS2. The surface energies were calculated with a sulfur environment using first-principle-based thermodynamics. It is founded that surfaces with metal atoms at their outermost layer have higher energy. The stoichiometric (220) surface terminated by two layer of sulfur atoms is most stable under the sulfur-rich condition, while the non-stoichiometric (211) surface terminated by a layer of Co atoms has the lower energy under the sulfur-poor environment. The electric structure results show that the front valence electrons of (200) surface are active, indicating that there may be some active sites on this face. There is an energy gap between the stoichiometric (220) and (211), which has low Fermi energy, indicating that their electronic structures are dynamically stable. Spin-polarized bands are calculated on the stoichiometric surfaces, and these two (200) and (210) surfaces are predicted to be noticeably spin-polarized. The Bravais-Friedel-Donnay-Harker (BFDH) method is adopted to predict crystal growth habit. The results show that the most important crystal planes for the CoS2 crystal growth are (111) and (200) planes, and the macroscopic morphology of CoS2 crystal may be spherical, cubic, octahedral, prismatic or plate-shaped, which have been verified by experiments.

| S-EPMC7428281 | biostudies-literature

Protein Sequence Comparison Based on Physicochemical Properties and the Position-Feature Energy Matrix.

Project description:We develop a novel position-feature-based model for protein sequences by employing physicochemical properties of 20 amino acids and the measure of graph energy. The method puts the emphasis on sequence order information and describes local dynamic distributions of sequences, from which one can get a characteristic B-vector. Afterwards, we apply the relative entropy to the sequences representing B-vectors to measure their similarity/dissimilarity. The numerical results obtained in this study show that the proposed methods leads to meaningful results compared with competitors such as Clustal W.

| S-EPMC5385872 | biostudies-literature

Preparation of UV-Curable Low Surface Energy Polyurethane Acrylate/Fluorinated Siloxane Resin Hybrid Coating with Enhanced Surface and Abrasion Resistance Properties.

Project description:Low surface energy coatings have gained considerable attention due to their superior surface hydrophobic properties. However, their abrasion resistance and sustainability of surface hydrophobicity are still not very satisfactory and need to be improved. In this work, a series of utraviolet (UV)-curable fluorosiloxane copolymers were synthesized and used as reactive additives to prepare polyurethane acrylate coatings with low surface energy. The effect of the addition of the fluorinated graft copolymers on the mechanical durability and surface hydrophobicity of the UV-cured hybrid films during the friction-annealing treatment cycles was investigated. The results show that introducing fluorosiloxane additives can greatly enhance surface hydrophobicity of the hybrid film. With addition of 2 wt.% fluorosiloxane copolymers, the water contact angle (WCA) value of the hybrid film was almost tripled compared to that of the pristine PU film, increasing from 58° to 144°. The hybrid film also showed enhanced abrasion resistance and could withstand up to about 60 times of friction under a pressure of 20 kPa. The microstructure formed in the annealed film was found to contribute much to achieve better surface hydrophobicity. The polyurethane acrylate/fluorinated siloxane resin hybrid film prepared in this study exhibits excellent potential for applications in the low surface energy field.

| S-EPMC7143720 | biostudies-literature

Comparison Study of Myocardial Radiomics Feature Properties on Energy-Integrating and Photon-Counting Detector CT.

Project description:The implementation of radiomics-based, quantitative imaging parameters is hampered by a lack of stability and standardization. Photon-counting computed tomography (PCCT), compared to energy-integrating computed tomography (EICT), does rely on a novel detector technology, promising better spatial resolution and contrast-to-noise ratio. However, its effect on radiomics feature properties is unknown. This work investigates this topic in myocardial imaging. In this retrospective, single-center IRB-approved study, the left ventricular myocardium was segmented on CT, and the radiomics features were extracted using pyradiomics. To compare features between scanners, a t-test for non-paired samples and F-test was performed, with a threshold of 0.05 set as a benchmark for significance. Feature correlations were calculated by the Pearson correlation coefficient, and visualization was performed with heatmaps. A total of 50 patients (56% male, mean age 56) were enrolled in this study, with equal proportions of PCCT and EICT. First-order features were, nearly, comparable between both groups. However, higher-order features showed a partially significant difference between PCCT and EICT. While first-order radiomics features of left ventricular myocardium show comparability between PCCT and EICT, detected differences of higher-order features may indicate a possible impact of improved spatial resolution, better detection of lower-energy photons, and a better signal-to-noise ratio on texture analysis on PCCT.

| S-EPMC9141463 | biostudies-literature

Preparation of three-dimensional palygorskite based carrier.

Project description:Palygorskite is a kind of crystalline hydrated magnesium aluminum silicate mineral with micro-fibrous morphology. Due to the large specific surface area, moderate cationic exchange capacity and pronounced adsorption properties, it has been widely used in many fields. In order to enhance the loading capacity and adjust the microstructure of palygorskite (Pal) crystal, series of three-dimensional palygorskite carriers (3D Pal) with different pore size were fabricated through grafting from or grafting onto method. Due to the functional and cross-linked molecules act as upholder reagents, the specific surface of individual palygorskite is fully utilized and the load capacity is greatly improved. The porosity and pore size of 3D palygorskite based carrier also can be regulated by the length of organic molecular chain segments. The successful preparation of 3D Pal-based carrier provides a new way for surface grafting, modification or preparing 3D carrier of palygorskite and other minerals.•The developed method allows fabricating three-dimensional palygorskite based carriers by covalent bonding method.•The pore size of the as-prepared carriers can be conveniently adjusted by length of the bonded molecular chain.

| S-EPMC7078386 | biostudies-literature

Addition of Various Cellulosic Components to Bacterial Nanocellulose: A Comparison of Surface Qualities and Crystalline Properties.

Project description:Bacterial nanocellulose (BNC) is a biocompatible material with a lot of potential. To make BNC commercially feasible, improvements in its production and surface qualities must be made. Here, we investigated the in situ fermentation and generation of BNC by addition of different cellulosic substrates such as Avicel and carboxymethylcellulose (CMC) and using Komagataeibacter sp. SFCB22-18. The addition of cellulosic substrates improved BNC production by a maximum of about 5 times and slightly modified its structural properties. The morphological and structural properties of BNC were investigated by using Fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy and X-ray diffraction. Furthermore, a type-A cellulose-binding protein derived from Clostridium thermocellum, CtCBD3, was used in a novel biological analytic approach to measure the surface crystallinity of the BNC. Because Avicel and CMC may adhere to microfibrils during BNC synthesis or crystallization, cellulose-binding protein could be a useful tool for identifying the crystalline properties of BNC with high sensitivity.

| S-EPMC9705885 | biostudies-literature

Effect of energy transfer on the optical properties of surface-passivated perovskite films with CdSe/ZnS quantum dots.

Project description:Surface passivation is an effective method to protect the surfaces and improve the luminescence properties of perovskite (PS) films. CdSe/ZnS core-shell quantum dots (QDs) have been employed for surface passivation of PS films because of their size-dependent tunable bandgaps. Herein, the energy transfer (ET) behavior of CH3NH3PbI2Br PS films covered with CdSe/ZnS QDs (QD/PS hybrid structures) is characterized by using photoluminescence (PL) and time-resolved PL spectroscopy. The PL decay time and the integrated PL intensity of the QD/PS hybrid structure increase compared with those of the bare PS films, owing to ET from the QDs to the PS and reduced charge traps. The ET efficiency increases from ~7% to 63% for the QD/PS hybrid structure when the core diameter of the QDs decreases from 6.5 to 2.7 nm, respectively. This can be explained by the charge transfer rate enhancement due to the control of energy level alignment of QDs. These results allow us to understand fundamental mechanisms such as ET from QDs to PS films as a function of the size of the QD.

| S-EPMC6895127 | biostudies-literature

The Diffusion of Low-Energy Methyl Group on ITO Film Surface and Its Impact on Optical-Electrical Properties.

Project description:Indium tin oxide (ITO) film is one of the ideal candidates for transparent conductive cathode in methylammonium lead halide perovskite solar cells. Thus, the diffusion of methyl group in ITO film is inevitable, which could deteriorate the optical-electrical property of ITO film. In this study, ITO films with and without (100) preferred orientation were bombarded by the low-energy methyl group beam. After the bombardment, the optical-electrical property of ITO film without (100) preferred orientation deteriorated. The bombardment of methyl group had little influence on the optical-electrical property of ITO film with (100) preferred orientation. Finally, combining the crystallographic texture and chemical bond structure analysis, the diffusion mechanism of low-energy methyl group on ITO lattice and grain boundary, as well as the relation between the optical-electrical property and the diffusion of the methyl group, were discussed systematically. With the above results, ITO film with (100) preferred orientation could be an ideal candidate for transparent conductive cathode in methylammonium lead halide perovskite solar cells.

| S-EPMC6213592 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data