Dataset Information

A low-cost automated growth chamber system for continuous measurements of gas exchange at canopy scale in dynamic conditions.

ABSTRACT:

Background

Obtaining instantaneous gas exchanges data is fundamental to gain information on photosynthesis. Leaf level data are reliable, but their scaling up to canopy scale is difficult as they are acquired in standard and/or controlled conditions, while natural environments are extremely dynamic. Responses to dynamic environmental conditions need to be considered, as measurements at steady state and their related models may overestimate total carbon (C) plant uptake.

Results

In this paper, we describe an automatic, low-cost measuring system composed of 12 open chambers (60 × 60 × 150 cm; around 400 euros per chamber) able to measure instantaneous CO₂ and H₂O gas exchanges, as well as environmental parameters, at canopy level. We tested the system's performance by simulating different CO₂ uptake and respiration levels using a tube filled with soda lime or pure CO₂, respectively, and quantified its response time and measurement accuracy. We have been also able to evaluate the delayed response due to the dimension of the chambers, proposing a method to correct the data by taking into account the response time ([Formula: see text]) and the residence time (τ). Finally, we tested the system by growing a commercial soybean variety in fluctuating and non-fluctuating light, showing the system to be fast enough to capture fast dynamic conditions. At the end of the experiment, we compared cumulative fluxes with total plant dry biomass.

Conclusions

The system slightly over-estimated (+ 7.6%) the total C uptake, even though not significantly, confirming its ability in measuring the overall CO₂ fluxes at canopy scale. Furthermore, the system resulted to be accurate and stable, allowing to estimate the response time and to determine steady state fluxes from unsteady state measured values. Thanks to the flexibility in the software and to the dimensions of the chambers, even if only tested in dynamic light conditions, the system is thought to be used for several applications and with different plant canopies by mimicking different environmental conditions.

SUBMITTER: Salvatori N

PROVIDER: S-EPMC8243713 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:BackgroundLarge-scale data on the photosynthetic characteristics of whole crop canopy is crucial for improving yield. However, current data collection methods remain challenging, and the time constraints associated with photosynthetic data collection further complicate matters. Developing a practical yet easy-to-use tool for collecting whole-canopy data is essential to address these challenges. Furthermore, it is necessary to obtain instantaneous measurements of photosynthetic rate over a wide range of CO2 concentrations under an unsteady state to enable faster data collection and obtain reliable biochemical limits of carbon assimilation. This study developed a semi-open chamber system with steady and unsteady state measurement techniques to collect biochemical photosynthetic data from an entire cucumber canopy, emphasizing the correction procedures for CO2 concentration of unsteady state measurements applicable regardless of chamber scale.ResultsAfter constructing a semi-open chamber system, we described how to correct measurement errors according to chamber volume. In order to assess the accuracy of the newly developed system, an analysis was conducted to determine the overall measurement error resulting from variations in the reference, sample CO2 concentration, and leakage flow rate. The total measurement error was accurate to no more than 10%. Furthermore, the difference between the photosynthetic rate of the single leaf and that of the whole-canopy was not significant in Rubisco activity-limited carboxylation range. In addition, the Farquhar-von Caemmerer-Berry (FvCB) model parameters and the photosynthetic rate estimation values were compared to evaluate the steady- and unsteady state measurement methods between the cucumber seedlings' single-leaf and whole-canopy. The average root mean square error of the FvCB model in the steady (standard A-Ci response) and unsteady states (800 to 400 ramp) of the chambers was 1.4 and 2.3, respectively. Results show that the developed system is suitable for measuring the gas exchange rate of the cucumber canopy.ConclusionsWe demonstrate the correction method for measurement errors to enable the gas exchange rate of the whole-canopy even in an unsteady state. The correction method of the measurement system of the gas exchange rate for the whole- canopy can be applied regardless of the volume of the chamber, and it can be applied simply to other chamber systems. In addition, an unsteady state measurement method for fast data collection was also applicable. However, it was deemed necessary to identify a more optimal measurement range by conducting measurements across a broader range of values.

Project description:Infrared canopy temperature (CT) is a well-established surrogate measure of stomatal conductance. There is ample evidence showing that genotypic variation in stomatal conductance is associated with grain yield in wheat. Our goal was to determine when CT repeatability is greatest (throughout the season and within the day) to guide CT deployment for research and wheat breeding. CT was measured continuously with ArduCrop wireless infrared thermometers from post-tillering to physiological maturity, and with airborne thermography on cloudless days from manned helicopter at multiple times before and after flowering. Our experiments in wheat, across two years contrasting for water availability, showed that repeatability for CT was greatest later in the season, during grain-filling, and usually in the afternoon. This was supported by the observation that repeatability for ArduCrop, and more so for airborne CT, was significantly associated (P < 0.0001) with calculated clear-sky solar radiation and to a lesser degree, vapor pressure deficit. Adding vapor pressure deficit to a model comprising either clear-sky solar radiation or its determinants, day-of-year and hour-of-day, made little to no improvement to the coefficient of determination. Phenotypic correlations for airborne CT afternoon sampling events were consistently high between events in the same year, more so for the year when soil water was plentiful (r = 0.7 to 0.9) than the year where soil water was limiting (r = 0.4 to 0.9). Phenotypic correlations for afternoon airborne CT were moderate between years contrasting in soil water availability (r = 0.1 to 0.5) and notably greater on two separate days following irrigation or rain in the drier year, ranging from r = 0.39 to 0.53 (P < 0.0001) for the midday events. For ArduCrop CT the pattern of phenotypic correlations, within a given year, was similar for both years: phenotypic correlations were higher during the grain-filling months of October and November and for hours-of-day from 11 onwards. The lowest correlations comprised events from hours-of-day 8 and 9 across all months. The capacity for the airborne method to instantaneously sample CT on hundreds of plots is more suited to large field experiments than the static ArduCrop sensors which measure CT continuously on a single experimental plot at any given time. Our findings provide promising support for the reliable deployment of CT phenotyping for research and wheat breeding, whereby the high repeatability and high phenotypic correlations between afternoon sampling events during grain-filling could enable reliable screening of germplasm from only one or two sampling events.