Characterising lithium-ion electrolytes via operando Raman microspectroscopy.
Ontology highlight
ABSTRACT:
SUBMITTER: Fawdon J
PROVIDER: S-EPMC8245635 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:One of the primary challenges to improving lithium-ion batteries lies in comprehending and controlling the intricate interphases. However, the complexity of interface reactions and the buried nature make it difficult to establish the relationship between the interphase characteristics and electrolyte chemistry. Herein, we employ diverse characterization techniques to investigate the progression of electrode-electrolyte interphases, bringing forward opportunities to improve the interphase properties by what we refer to as high-entropy solvation disordered electrolytes. Through formulating an electrolyte with a regular 1.0 M concentration that includes multiple commercial lithium salts, the solvation interaction with lithium ions alters fundamentally. The participation of several salts can result in a weaker solvation interaction, giving rise to an anion-rich and disordered solvation sheath despite the low salt concentration. This induces a conformal, inorganic-rich interphase that effectively passivates electrodes, preventing solvent co-intercalation. Remarkably, this electrolyte significantly enhances the performance of graphite-containing anodes paired with high-capacity cathodes, offering a promising avenue for tailoring interphase chemistries.
| S-EPMC11320655 | biostudies-literature
Project description:Operando monitoring of complex physical and chemical activities inside rechargeable lithium-ion batteries during thermal runaway is critical to understanding thermal runaway mechanisms and giving early warning of safety-related failure. However, most existing sensors cannot survive during such extremely hazardous thermal runaway processes (temperature up to 500 °C accompanied by fire and explosion). To address this, we develop a compact and multifunctional optical fiber sensor (12 mm in length and 125 µm in diameter) capable of insertion into commercial 18650 cells to continuously monitor internal temperature and pressure effects during cell thermal runaway. We observe a stable and reproducible correlation between the cell thermal runaway and the optical response. The sensor's signal shows two internal pressure peaks corresponding to safety venting and initiation of thermal runaway. Further analysis reveals that a scalable solution for predicting imminent thermal runaway is the detection of the abrupt turning range of the differential curves of cell temperature and pressure, which corresponds to an internal transformation between the cell reversible and irreversible reactions. By raising an alert even before safety venting, this new operando measurement tool can provide crucial capabilities in cell safety assessment and warning of thermal runaway.
| S-EPMC10462619 | biostudies-literature
Project description:Finding a viable electrolyte for next-generation 5?V-class lithium-ion batteries is of primary importance. A long-standing obstacle has been metal-ion dissolution at high voltages. The LiPF6 salt in conventional electrolytes is chemically unstable, which accelerates transition metal dissolution of the electrode material, yet beneficially suppresses oxidative dissolution of the aluminium current collector; replacing LiPF6 with more stable lithium salts may diminish transition metal dissolution but unfortunately encounters severe aluminium oxidation. Here we report an electrolyte design that can solve this dilemma. By mixing a stable lithium salt LiN(SO2F)2 with dimethyl carbonate solvent at extremely high concentrations, we obtain an unusual liquid showing a three-dimensional network of anions and solvent molecules that coordinate strongly to Li(+) ions. This simple formulation of superconcentrated LiN(SO2F)2/dimethyl carbonate electrolyte inhibits the dissolution of both aluminium and transition metal at around 5?V, and realizes a high-voltage LiNi0.5Mn1.5O4/graphite battery that exhibits excellent cycling durability, high rate capability and enhanced safety.
| S-EPMC4931331 | biostudies-literature
Project description:Monitoring the precise lithium inventory of the graphitic carbon electrode within the Li-ion battery, in order to assess cell aging, has remained challenging. Herein, operando electrochemical Kerr-gated Raman spectroscopy measurements on microcrystalline graphite during complete lithium insertion and extraction are reported and compared to conventional continuous-wave Raman microscopy. Suppression of the fluorescence emission signals via use of the Kerr gate enabled the measurement of the Raman graphitic bands of highly lithiated graphite where 0.5 ≤ x ≤ 1 for Li x C6. The broad graphitic band initially centered at ca. 1590 cm-1 for Li0.5C6 linearly shifted to ca. 1564 cm-1 with further lithiation to LiC6, thus offering a sensitive diagnostic tool to interrogate high states of charge of graphitic carbon-based negative electrodes.
| S-EPMC9380014 | biostudies-literature
Project description:A new polymer electrolyte based on holographic photopolymer is designed and fabricated. Ethylene carbonate (EC) and propylene carbonate (PC) are introduced as the photoinert substances. Upon laser-interference-pattern illumination, photopolymerization occurs within the constructive regions which subsequently results in a phase separation between the photogenerated polymer and unreacted EC-PC, affording holographic photopolymer electrolytes (HPEs) with a pitch of ?740 nm. Interestingly, both diffraction efficiency and ionic conductivity increase with an augmentation of the EC-PC content. With 50 wt% of EC-PC, the diffraction efficiency and ionic conductivity are ?60% and 2.13 × 10-4 S cm-1 at 30 °C, respectively, which are 60 times and 5 orders of magnitude larger than the electrolyte without EC-PC. Notably, the HPEs afford better anisotropy and more stable electrochemical properties when incorporating N,N-dimethylacrylamide. The HPEs exhibit good toughness under bending, excellent optical transparency under ambient conditions, and astonishing capabilities of reconstructing colored images. The HPEs here open a door to design flexible and transparent electronics with good mechanical, electrical, and optical functions.
| S-EPMC6524123 | biostudies-literature
Project description:Polymerized ionic liquids (PIL) are an interesting substance class, which is discussed to transfer the outstanding properties and tunability of ionic liquids into a solid material. In this study we extend our previous research on ammonium based PIL and discuss the influence of additives and their usability as polymer electrolyte membranes for lithium ion batteries. The polymer electrolyte is thereby used as replacement for the commercially widespread system of a separator that is soaked with liquid electrolyte. The influence of the material composition on the ionic conductivity (via electrochemical impedance spectroscopy) and the diffusion coefficients (via pulsed-field-gradient nuclear magnetic resonance spectroscopy) were studied and cell tests with adapted membrane materials were performed. High amounts of the additional ionic liquid (IL) MPPyrr-TFSI (1-methyl-1-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide) increased the ionic conductivity of the materials up to 1.3·10-4 S·cm-1 but made the usage of a cross-linker necessary to obtain mechanically stable membranes. The application of liquid electrolyte mixtures with ethylene carbonate (EC) and MPPyrr-TFSI decreased ionic conductivity values down to the 10-9 S·cm-1 range, but increased 7Li diffusion coefficients with increasing amounts of EC up to 1.7·10-10 m2·s-1. Cell tests with two membrane mixtures proofed that it is possible to build electrolyte membranes on basis of the polymerized ionic liquids, but also showed that further research is necessary to ensure stable and efficient cell cycling.
| S-EPMC8707941 | biostudies-literature
Project description:The safety concerns associated with current lithium-ion batteries are a significant drawback. A short-circuit within the battery's internal components, such as those caused by a car accident, can lead to ignition or even explosion. To address this issue, a polymer shear thickening electrolyte, free from flammable solvents, has been developed. It comprises a star-shaped oligomer derived from a trimethylolpropane (TMP) core and polyether chains, along with the inclusion of 20 wt.% nanosilica. Notably, the star-shaped oligomer serves a dual function as both the solvent for the lithium salt and the continuous phase of the shear thickening fluid. The obtained electrolytes exhibit an ionic conductivity of the order of 10-6 S cm-1 at 20 °C and 10-4 S cm-1 at 80 °C, with a high Li+ transference number (t+ = 0.79). A nearly thirtyfold increase in viscosity to a value of 1187 Pa s at 25 °C and a critical shear rate of 2 s-1 were achieved. During impact, this electrolyte could enhance cell safety by preventing electrode short-circuiting.
| S-EPMC11357618 | biostudies-literature
Project description:This work introduces a polymeric backbone eutectogel (P-ETG) hybrid solid-state electrolyte with an N-isopropylacrylamide (NIPAM) backbone for high-energy lithium-ion batteries (LIBs). The NIPAM-based P-ETG is (electro)chemically compatible with commercially relevant positive electrode materials such as the nickel-rich layered oxide LiNi0.6Mn0.2Co0.2O2 (NMC622). The chemical compatibility was demonstrated through (physico)chemical characterization methods. The nonexistence (within detection limits) of interfacial reactions between the electrolyte and the positive electrode, the unchanged bulk crystallographic composition, and the absence of transition metal ions leaching from the positive electrode in contact with the electrolyte were demonstrated by Fourier transform infrared spectroscopy, powder X-ray diffraction, and elemental analysis, respectively. Moreover, the NIPAM-based P-ETG demonstrates a wide electrochemical stability window (1.5-5.0 V vs Li+/Li) and a reasonably high ionic conductivity at room temperature (0.82 mS cm-1). The electrochemical compatibility of a high-potential NMC622-containing positive electrode and the P-ETG is further demonstrated in Li|P-ETG|NMC622 cells, which deliver a discharge capacity of 134, 110, and 97 mAh g-1 at C/5, C/2, and 1C, respectively, after 90 cycles. The Coulombic efficiency is >95% at C/5, C/2, and 1C. Hence, gaining scientific insights into the compatibility of the electrolytes with positive electrode materials that are relevant to the commercial market, like NMC622, is important because this requires going beyond the electrolyte design itself, which is essential to their practical applications.
| S-EPMC10568718 | biostudies-literature
Project description:Li6.3La3Zr1.65W0.35O12 (LLZO)-Li6PS5Cl (LPSC) composite electrolytes and all-solid-state cells containing LLZO-LPSC were fabricated by cold pressing at room temperature. The LPSC:LLZO ratio was varied, and the microstructure, ionic conductivity, and electrochemical performance of the corresponding composite electrolytes were investigated; the ionic conductivity of the composite electrolytes was three or four orders of magnitude higher than that of LLZO. The high conductivity of the composite electrolytes was attributed to the enhanced relative density and the rule of mixture for soft LPSC particles with high lithium-ion conductivity (~10-4 S·cm-1). The specific capacities of all-solid-state cells (ASSCs) consisting of a LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode and the composite electrolytes of LLZO:LPSC = 7:3 and 6:4 were 163 and 167 mAh·g-1, respectively, at 0.1 C and room temperature. Moreover, the charge-discharge curves of the ASSCs with the composite electrolytes revealed that a good interfacial contact was successfully formed between the NCM811 cathode and the LLZO-LPSC composite electrolyte.
| S-EPMC8073507 | biostudies-literature
Project description:The operating temperatures of commercial lithium-ion batteries (LIBs) are generally restricted to a narrow range of -20 to 55 °C because the electrolyte is composed of highly volatile and flammable organic solvents and thermally unstable salts. Herein, the use of concentrated electrolytes is proposed to widen the operating temperature to -20 to 100 °C. It is demonstrated that a 4.0 mol L-1 LiN(SO2 F)2 /dimethyl carbonate electrolyte enables the stable charge-discharge cycling of a graphite anode and a high-capacity LiNi0.6 Co0.2 Mn0.2 O2 cathode and the corresponding full cell in a wide temperature range from -20 to 100 °C owing to the highly thermal stable solvation structure of the concentrated electrolyte together with the robust and Li+ -conductive passivation interphase it offered that alleviate various challenges at high temperatures. This work demonstrates the potential for the development of safe LIBs without the need for bulky and heavy thermal management systems, thus significantly increasing the overall energy density.
| S-EPMC8456280 | biostudies-literature