Tuning the Properties of MOF-808 via Defect Engineering and Metal Nanoparticle Encapsulation.
Ontology highlight
ABSTRACT:
SUBMITTER: Hardian R
PROVIDER: S-EPMC8251568 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Defect engineering is a promising route for controlling the electronic properties of monolayer transition-metal dichalcogenide (TMD) materials. Here, we demonstrate that the electronic structure of MoS2 depends sensitively on the defect charge, both its sign and magnitude. In particular, we study shallow bound states induced by charged defects using large-scale tight-binding simulations with screened defect potentials and observe qualitative changes in the orbital character of the lowest lying impurity states as function of the impurity charge. To gain further insights, we analyze the competition of impurity states originating from different valleys of the TMD band structure using effective mass theory and find that impurity state binding energies are controlled by the effective mass of the corresponding valley, but with significant deviations from hydrogenic behaviour due to unconventional screening of the defect potential.
| S-EPMC6134151 | biostudies-literature
Project description:The growth process of metal-organic framework (MOF) nanocrystals defines their properties and functions. However, defects may be prevalent during the crystallization of even seemingly perfect MOFs, such as zeolitic imidazolate framework-8 (ZIF-8), and yet direct probing of such structural defects has been challenging because of the lack of nanoscale techniques to locally examine individual nanocrystals. Here, we directly study local defects, such as missing linkers or metal vacancies, in ZIF-8 nano- and microcrystals with near-field IR nanospectroscopy combined with density functional theory calculations. We track the chemical changes during crystallization and show that structural defects like zinc cations that are bound to molecules of the reactant gradually disappear with ripening of the crystals, while dangling and missing linker defects prevail. The resulting defect-terminating groups or open-metal sites produce mechanical anisotropy and reduce the Young's modulus, as measured via tip force microscopy with nanoscale resolution and supported by theoretical modeling. However, these structural defects also open the door for defect engineering to tune the performance of ZIF-8 by offering additional adsorption sites for targeted catalytic reactions, chemical sensing, or gas capture.
| S-EPMC9150067 | biostudies-literature
Project description:Mg2Sn is a potential thermoelectric (TE) material that can directly convert waste heat into electricity. In this study, Mg2Sn single-crystal ingots are prepared by melting under an Ar atmosphere. The prepared ingots contain Mg vacancies (VMg) as point defects, which results in the formation of two regions: an Mg2Sn single-crystal region without VMg (denoted as the single-crystal region) and a region containing VMg (denoted as the VMg region). The VMg region is embedded in the matrix of the single-crystal region. The interface between the VMg region and the single-crystal region is semi-coherent, which does not prevent electron carrier conduction but does increase phonon scattering. Furthermore, electron carrier concentration depends on the fraction of VMg, reflecting the acceptor characteristics of VMg. The maximum figure of merit zTmax of 1.4(1) × 10-2 is realised for the Mg2Sn single-crystal ingot by introducing VMg. These results demonstrate that the TE properties of Mg2Sn can be optimised via point-defect engineering.
| S-EPMC7005024 | biostudies-literature
Project description:Zr-containing MOF-808 is a very promising heterogeneous catalyst for the selective reduction of ketosteroids to the corresponding hydroxysteroids through a Meerwein-Ponndorf-Verley (MPV) reaction. Interestingly, the process leads to the diastereoselective synthesis of elusive 17α-hydroxy derivatives in one step, whereas most chemical and biological transformations produce the 17β-OH compounds, or they require several additional steps to convert 17β-OH into 17α-OH by inverting the configuration of the 17 center. Moreover, MOF-808 is found to be stable and reusable; it is also chemoselective (only keto groups are reduced, even in the presence of other reducible groups such as C=C bonds) and regioselective (in 3,17-diketosteroids only the keto group in position 17 is reduced, while the 3-keto group remains almost intact). The kinetic rate constant and thermodynamic parameters of estrone reduction to estradiol have been obtained by a detailed temperature-dependent kinetic analysis. The results evidence a major contribution of the entropic term, thus suggesting that the diastereoselectivity of the process is controlled by the confinement of the reaction inside the MOF cavities, where the Zr4+ active sites are located.
| S-EPMC8362071 | biostudies-literature
Project description:In this study, the effects of ligand phase, morphology, and temperature on the elastic modulus of free-standing alkanethiol-capped gold nanoparticle membranes are reported. Langmuir films of 2.5 nm gold nanoparticles capped with tetradecanethiol were prepared at temperatures above and below the phase transition temperature (T m) of the ligand shell and transferred to holey carbon grids (containing 1.2 μm holes) to form free-standing membranes. Force-indentation measurements are used to measure the elastic modulus of the membranes using an atomic force microscope in the temperature range 10-40 °C. These films are compared with membranes of dodecanethiol-capped gold nanoparticles, which do not undergo a ligand order-disorder transition in the temperature range investigated. The ligand phase effect is observed in the tetradecanethiol-capped gold nanoparticle films, where an abrupt change in the elastic modulus is seen near T m. The temperature (relative to T m) during the fabrication of the films is determined to play an important role in tuning the mechanical strength of these films in this temperature range by both changing the nature of the interparticle interactions and by affecting microscale film morphology.
| S-EPMC6641765 | biostudies-literature
Project description:In a MIS (Metal/Insulator/Semiconductor) structure consisting of two terminals, a systematic analysis of the electrical charge transport mechanism through an insulator is essential for advanced electronic application devices such as next-generation memories based on resistance differences. Herein, we have verified the charge transfer phenomenon in MIOS (Metal/Insulator/Oxide Semiconductor) diodes through a defect engineering of the insulator. By selectively generating the oxygen vacancies in the insulator (Al2O3), the MIOS diode rectification of the P++-Si anode/Al2O3/IGZO cathode reached 107 at 1.8 V and considerably suppressed the leakage current. Studying the current-voltage characteristics of MIOS diodes shows that the charge carrier transport mechanism can vary depending on the defect density as well as the difference between the CBM (conduction band minimum) of the semiconductor and the oxygen vacancy energy level of the insulator.
| S-EPMC6635483 | biostudies-literature
Project description:The synthesis and solubility behaviors of four generation five (G5) triazine dendrimers are studied. While the underivatized cationic dendrimer is soluble in water, the acetylated and propanoylated derivatives undergo coacervation in water upon increasing temperature. Occurring around room temperature, this behavior is related to a liquid-liquid phase transition with a lower critical solution temperature (LCST) and is explained by differences in composition, notably, the hydrophobic nature of the terminal groups. Interestingly, the water solubility of the acetylated dendrimer is affected by the addition of selected metal ions. Titrating solutions of acetylated dendrimer at temperatures below the LCST with gold or palladium ions promoted precipitation, but platinum, iridium, and copper did not. Gold nanoparticles having diameters of 2.5 ± 0.8 nm can be obtained from solutions of the acetylated dendrimer at concentrations of gold less than that required to induce precipitation by treating the solution with sodium borohydride.
| S-EPMC6273988 | biostudies-literature
Project description:The removal of radioiodine from the exhaust gas streams produced in spent fuel reprocessing plants is of paramount importance for the nuclear fuel cycle's security. Here, millimeter-sized poly(vinylidene fluoride) (PVDF) composites containing zirconium-based metal-organic frameworks, MOF-808, were synthesized by a facile phase inversion method to adsorb the volatile iodine. MOF-808@PVDF composites have inherited the crystallinity and pore accessibility of MOF-808, as well as its outstanding iodine capture performance. The MOF-808@PVDF composite beads containing 70 wt% MOFs, exhibited ultrahigh iodine adsorption capacity, 1.42 g g-1 at 80 °C, much higher than other millimeter-sized adsorbents reported in the literature. Raman mapping suggests that the negative iodine ions were formed at the early stage of iodine adsorption, while the close-packed iodine molecules were subsequently trapped in the frames. Using dynamic adsorption, the influences of iodine concentration, operating temperature and humidity were analyzed to evaluate its application potential in industrial conditions. The iodine adsorption capacity could reach 1.36 g g-1 at 80 °C, 100 °C and 120 °C in flow gas. And the elevated temperature (120 °C) is beneficial to accelerating the mass transfer of iodine vapor, as well as slightly inhibiting the competitive adsorption of water molecules under humidity. Besides, only one-third of the loaded iodine was released in nitrogen purging after saturated adsorption. The remaining majority was trapped firmly by the beads due to their strong interactions with the frameworks. This work highlights the millimeter-sized MOF-808@polymer composite beads with ultrahigh iodine adsorption capacity, providing experimental references for their application in radioiodine removal from hot and moist streams.
| S-EPMC9058509 | biostudies-literature
Project description:Surface chemical composition is fundamental to determining properties on the nanoscale, making precise control over surface chemistry critical to being able to optimise nanomaterials for virtually any application. Surface-engineering independent of the preparation of the underlying nanomaterial is particularly attractive for efficient, divergent synthetic strategies, and for the potential to create reactive, responsive and smart nanodevices. For monolayer-stabilised nanoparticles, established methods include ligand exchange to replace the ligand shell in its entirety, encapsulation with amphiphilic (macro)molecules, noncovalent interactions with surface-bound biomolecules, or a relatively limited number of covalent bond forming reactions. Yet, each of these approaches has considerable drawbacks. Here we show that dynamic covalent exchange at the periphery of the nanoparticle-stabilizing monolayer allows surface-bound ligand molecular structure to be substantially modified in mild and reversible processes that are independent of the nanoparticle-molecule interface. Simple stoichiometric variation allows the extent of exchange to be controlled, generating a range of kinetically stable mixed-monolayer compositions across an otherwise identical, self-consistent series of nanoparticles. This approach can be used to modulate nanoparticle properties that are defined by the monolayer composition. We demonstrate switching of nanoparticle solvent compatibility between widely differing solvents - spanning hexane to water - and the ability to tune solubility across the entire continuum between these extremes, all from a single nanoparticle starting point. We also demonstrate that fine control over mixed-monolayer composition influences the assembly of discrete, colloidally stable nanoparticle clusters. By carefully assessing monolayer composition in each state, using both in situ and ex situ methods, we are able to correlate the molecular-level details of the nanoparticle-bound monolayer with system-level properties and behaviour. These empirically determined relationships contribute fundamental insights on nanoscale structure-function relationships, which are currently beyond the capabilities of ab initio prediction.
| S-EPMC5869618 | biostudies-literature
Project description:Engineering the physical properties of particles, especially their size, is an important parameter in the fabrication of successful carrier systems for the delivery of therapeutics. Here, various routes were explored for the fabrication of particles in the nanosize regime. It was demonstrated that the use of a charged species and/or solvent with high dielectric constant can influence the size and distribution of particles, with the charged species having a greater effect on the size of the particles and the solvent a greater effect on the distribution of the particles. In addition to the fabrication of nanoparticles, their fractionation into specific size ranges using centrifugation was also investigated. The in vitro particle uptake and intracellular transport of these nanoparticles was studied as a function of size and incubation period. The highest level of intralysosomal localization was observed for the smallest nanoparticle group (average of 174 nm), followed by the groups with increasing sizes (averages of 378 and 575 nm), most likely due to the faster endosomal uptake of smaller particles. In addition, the internalization of nanoparticle clusters and number of nanoparticles per cell increased with longer incubation periods. This work establishes a technological approach to compartmentalized nanoparticles with defined sizes. This is especially important as relatively subtle differences in size can modulate cell uptake and determine intercellular fate. Future work will need to address the role of specific targeting ligands on cellular uptake and intracellular transport of compartmentalized nanoparticles.
| S-EPMC5689507 | biostudies-literature