Browse
Submit Data
Databases
API
Help

Dataset Information

31 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Reduction of CO₂ Emission from Off-Gases of Steel Industry by Dry Reforming of Methane.

ABSTRACT: In a novel process, CO₂ and CH₄ from the off-gases of the coke oven and blast furnace are used in homogeneous reforming of those greenhouse gases to valuable syngas, a mixture of H₂ and CO. Synthetic mixtures of the off-gases from those large apparatuses of steel industry are fed to a high-temperature, high-pressure flow reactor at varying temperature, pressure, residence time, and mixing ratio of coke oven gas (COG) to blast furnace gas (BFG). In this study, a maximal reduction of 78.5 % CO₂ and a CH₄ conversion of 95 % could be achieved at 1350 °C, 5.5 bar, and a COG/BFG ratio of 0.6. Significant carbonaceous deposits were formed but did not block the reactor tube in the operational time window allowing cyclic operation of the process. These measurements were based on prior thermodynamic analysis and kinetic predictions using an elementary-step reaction mechanism.

SUBMITTER: Angeli SD

PROVIDER: S-EPMC8251717 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Exploration of CO2 emission reduction pathways: identification of influencing factors of CO2 emission and CO2 emission reduction potential of power industry.

Project description:Low-carbon development of China's power sector is the key to achieving carbon peaking and carbon neutrality goals. Based on the logarithmic mean divisor index (LMDI) model, considering the carbon transfer caused by inter-provincial electricity trading, this paper analyzes the influencing factors of CO2 emissions in the provincial power sector and uses K-means clustering method to divide 30 provinces into four categories to analyze the differences in regional carbon emission characteristics. In addition, by establishing different development scenarios, the carbon emission trends and emission reduction potentials of each cluster under different emission reduction measures from 2020 to 2040 are studied, in order to explore the differentiated emission reduction paths of each cluster. The results show that the contribution of influencing factors shows great differences in different provinces. Trends in CO2 emissions vary widely across scenarios. In the reference scenario, the CO2 emissions of each cluster will continue to increase; in the existing policy scenario, the total power industry will peak at 6.1Gt in 2030; in the advance peak scenario that puts more emphasis on the development of advanced technologies and renewable energy under the clean development model, the carbon emission peak will be brought forward to 2025, and the peak will be reduced to 5.2Gt. Finally, differentiated emission reduction paths and measures are proposed for the future low-carbon development of different cluster power industries, providing theoretical reference for the deployment of provincial-level emission reduction work, which is of great significance to the global green and low-carbon transformation.Graphical abstractSupplementary informationThe online version contains supplementary material available at 10.1007/s10098-022-02456-1.

| S-EPMC9754311 | biostudies-literature

NiYAl-Derived Nanoporous Catalysts for Dry Reforming of Methane.

Project description:Dry reforming of methane can be used for suppressing the rapid growth of greenhouse gas emissions. However, its practical implementation generally requires high temperatures. In this study, we report an optimal catalyst for low-temperature dry reforming of methane with high carbon coking resistance synthesized from NiYAl alloy. A facile two-step process consisting of preferential oxidation and leaching was utilized to produce structurally robust nanoporous Ni metal and Y oxides from NiYAl4. The catalyst exhibited an optimal carbon balance (0.96) close to the ideal value of 1.0, indicating the optimized dry reforming pathway. This work proposes a facile route of the structural control of active metal/oxide sites for realizing highly active catalysts with long-term durability.

| S-EPMC7254345 | biostudies-literature

Dry reforming of methane over single-atom Rh/Al2O3 catalysts prepared by exsolution.

Project description:Single-atom catalysts often show exceptionally high performance per metal loading. However, the isolated atom sites tend to agglomerate during preparation and/or high-temperature reaction. Here we show that in the case of Rh/Al2O3 this deactivation can be prevented by dissolution/exsolution of metal atoms into/from the support. We design and synthesise a series of single-atom catalysts, characterise them and study the impact of exsolution in the dry reforming of methane at 700-900 °C. The catalysts' performance increases with increasing reaction time, as the rhodium atoms migrate from the subsurface to the surface. Although the oxidation state of rhodium changes from Rh(iii) to Rh(ii) or Rh(0) during catalysis, atom migration is the main factor affecting catalyst performance. The implications of these results for preparing real-life catalysts are discussed.

| S-EPMC10069472 | biostudies-literature

Microwave Heating-Assisted Catalytic Dry Reforming of Methane to Syngas.

Project description:Natural gas is a robust and environmentally friendlier alternative to oil resources for energy and chemicals production. However, gas is distributed globally within shales and hydrates, which are generally remote and difficult reserves to produce. The accessibility, transportation, and distribution, therefore, bring major capital costs. With today's low and foreseen low price of natural gas, conversion of natural gas to higher value-added chemicals is highly sought by industry. Dry reforming of methane (DRM) is a technology pathway to convert two critical greenhouse gas components, CH4 and CO2, to syngas, a commodity chemical feedstock. To date, the challenges of carbon deposition on the catalyst and evolution of secondary gas-phase products have prevented the commercial application of the DRM process. The recent exponential growth of renewable electricity resources, wind and solar power, provides a major opportunity to activate reactions by harnessing low-cost carbon-free energy via microwave-heating. This study takes advantage of differences in dielectric properties of materials to enable selective heating by microwave to create a large thermal gradient between a catalyst surface and the gas phase. Consequently, the reaction kinetics at the higher temperature catalyst surface are promoted while the reactions of lower temperature secondary gas-phase are reduced.

| S-EPMC5997706 | biostudies-literature

Nanoporous Nickel Composite Catalyst for the Dry Reforming of Methane.

Project description:The development of efficient catalysts with high activities and durabilities for use in the dry reforming of methane (DRM) is desirable but challenging. We report the development of a nanoporous nickel composite (nanoporous Ni/Y2O3) via a facile one-step dealloying technique, for use in the DRM. Focusing on the low-temperature DRM, our composite possessed remarkable activity and durability against coking compared with conventional particle-based Ni catalysts. This was attributed to the aluminum oxides present on the Ni surface, which suppress pore coarsening. In addition, the inert bundled Y2O3 nanowires are suitable for use as substrates for nanoporous Ni.

| S-EPMC6643422 | biostudies-literature

Enhanced Stability of Iridium Nanocatalysts via Exsolution for the CO2 Reforming of Methane.

Project description:The reforming reactions of greenhouse gases require catalysts with high reactivity, coking resistance, and structural stability for efficient and durable use. Among the possible strategies, exsolution has been shown to demonstrate the requirements needed to produce appropriate catalysts for the dry reforming of methane, the conversion of which strongly depends on the choice of active species, its interaction with the support, and the catalyst size and dispersion properties. Here, we exploit the exsolution approach, known to produce stable and highly active nanoparticle-supported catalysts, to develop iridium-nanoparticle-decorated perovskites and apply them as catalysts for the dry reforming of methane. By studying the effect of several parameters, we tune the degree of exsolution, and consequently the catalytic activity, thereby identifying the most efficient sample, 0.5 atomic % Ir-BaTiO3, which showed 82% and 86% conversion of CO2 and CH4, respectively. By comparison with standard impregnated catalysts (e.g., Ir/Al2O3), we benchmark the activity and stability of our exsolved systems. We find almost identical conversion and syngas rates of formation but observe no carbon deposition for the exsolved samples after catalytic testing; such deposition was significant for the traditionally prepared impregnated Ir/Al2O3, with almost 30 mgC/gsample measured, compared to 0 mgC/gsample detected for the exsolved system. These findings highlight the possibility of achieving in a single step the mutual interaction of the parameters enhancing the catalytic efficiency, leading to a promising pathway for the design of catalysts for reforming reactions.

| S-EPMC11348315 | biostudies-literature

Calcium-looping reforming of methane realizes in situ CO2 utilization with improved energy efficiency.

Project description:Closing the anthropogenic carbon cycle is one important strategy to combat climate change, and requires the chemistry to effectively combine CO2 capture with its conversion. Here, we propose a novel in situ CO2 utilization concept, calcium-looping reforming of methane, to realize the capture and conversion of CO2 in one integrated chemical process. This process couples the calcium-looping CO2 capture and the CH4 dry reforming reactions in the CaO-Ni bifunctional sorbent-catalyst, where the CO2 captured by CaO is reduced in situ by CH4 to CO, a reaction catalyzed by catalyzed by the adjacent metallic Ni. The process coupling scheme exhibits excellent decarbonation kinetics by exploiting Le Chatelier's principle to shift reaction equilibrium through continuous conversion of CO2, and results in an energy consumption 22% lower than that of conventional CH4 dry reforming for CO2 utilization. The proposed CO2 utilization concept offers a promising option to recycle carbon directly at large CO2 stationary sources in an energy-efficient manner.

| S-EPMC6461455 | biostudies-literature

Coking-resistant dry reforming of methane over Ni/γ-Al2O3 catalysts by rationally steering metal-support interaction.

Project description:The coking issue is the main challenge for dry reforming of methane (DRM) over Ni-based catalysts. Herein, we excavate the reasons for the enhanced coking resistance of the bounded Ni over the free state Ni in Ni/γ-Al2O3 catalysts for DRM. Rational metal-support interaction of the bounded Ni would facilitate desorption of CO, thus suppressing CO disproportionation and decreasing carbon deposition. The higher activity of the bounded Ni is ascribed to better methane cracking ability, stronger adsorption, and activation of CO2 by forming polydentate carbonate. The better activation of CO2 over the bounded Ni would also contribute to the gasification of formed coke. We gain an insight into the anti-coking mechanism of DRM determined by metal-support interaction in Ni/γ-Al2O3 catalysts through mechanistic studies. It is believed that our findings would enlighten the design of more efficient catalysts for DRM.

| S-EPMC8261659 | biostudies-literature

Morphology-Dependent Catalytic Activity of Ru/CeO? in Dry Reforming of Methane.

Project description:Three morphology-controlled CeO?, namely nanorods (NRs), nanocubes (NCs), and nanopolyhedra (NPs), with different mainly exposed crystal facets of (110), (100), and (111), respectively, have been used as supports to prepare Ru (3 wt.%) nanoparticle-loaded catalysts. The catalysts were characterized by H?-temperature programmed reduction (H?-TPR), CO? temperature programmed desorption (CO-TPD), N? adsorption?desorption, X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM) and energy-dispersive X-ray spectroscopy (XDS). The characterization results showed that CeO?-NRs, CeO?-NCs, and CeO?-NPs mainly expose (110), (100) and (111) facets, respectively. Moreover, CeO?-NRs and CeO?-NCs present higher oxygen vacancy concentration than CeO?-NPs. In the CO? reforming of methane reaction, Ru/CeO?-NR and Ru/CeO?-NC catalysts showed better catalytic performance than Ru/CeO?-NPs, indicating that the catalysts with high oxygen vacancy concentration are beneficial for promoting catalytic activity.

| S-EPMC6385116 | biostudies-literature

High Coke-Resistance Pt/Mg1-xNixO Catalyst for Dry Reforming of Methane.

Project description:A highly active and stable nano structured Pt/Mg1-xNixO catalysts was developed by a simple co-precipitation method. The obtained Pt/Mg1-xNixO catalyst exhibited cubic structure nanocatalyst with a size of 50-80 nm and realized CH4 and CO2 conversions as high as 98% at 900°C with excellent stability in the dry reforming of methane. The characterization of catalyst was performed using various kinds of analytical techniques including XRD, BET, XRF, TPR-H2, TGA, TEM, FESEM, FT-IR, and XPS analyses. Characterization of spent catalyst further confirms that Pt/Mg1-xNixO catalyst has high coke-resistance for dry reforming. Thus, the catalyst demonstrated in this study, offers a promising catalyst for resolving the dilemma between dispersion and reducibility of supported metal, as well as activity and stability during high temperature reactions.

| S-EPMC4706417 | biostudies-literature