Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Periodicity in the Electrochemical Dissolution of Transition Metals.

ABSTRACT: Extensive research efforts are currently dedicated to the search for new electrocatalyst materials in which expensive and rare noble metals are replaced with cheaper and more abundant transition metals. Recently, numerous alloys, oxides, and composites with such metals have been identified as highly active electrocatalysts through the use of high-throughput screening methods with the help of activity descriptors. Up to this point, stability has lacked such descriptors. Hence, we elucidate the role of intrinsic metal/oxide properties on the corrosion behavior of representative 3d, 4d, and 5d transition metals. Electrochemical dissolution of nine transition metals is quantified using online inductively coupled plasma mass spectrometry (ICP-MS). Based on the obtained dissolution data in alkaline and acidic media, we establish clear periodic correlations between the amount of dissolved metal, the cohesive energy of the metal atoms (E_coh ), and the energy of oxygen adsorption on the metal (ΔH_O,ads ). Such correlations can support the knowledge-driven search for more stable electrocatalysts.

SUBMITTER: Speck FD

PROVIDER: S-EPMC8252536 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Dissolution of Metals in Different Bromide-Based Systems: Electrochemical Measurements and Spectroscopic Investigations.

Project description:The dissolution of the main metals (Cu, Zn, Sn, Pb and Fe) found in waste printed circuit boards (WPCBs) was investigated by electrochemical corrosion measurements (potentiodynamic polarization and electrochemical impedance spectroscopy (EIS)) in different bromide-based systems that could be used as lixiviants in hydrometallurgical route of metals recovery. The analysis of the corrosion products was carried out by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) measurements. All measurements showed that the addition of bromine in the electrolyte favors to great extents the dissolution process of all studied metals as compared to bromine-free electrolytes. In the investigated experimental conditions, the highest dissolution rates of the metals were obtained in acidic KBr solution containing 0.01 mol/L bromine and they decreased in the following order: Zn >> Sn > Pb > Fe > Cu. The XRD and XPS chemical assessment allowed the identification of the dissolution products formed on the metallic surfaces after exposure to the electrolytes. They consisted mainly of oxides in the case of Cu, Zn, Sn and Fe, while the presence of PbBr2 was also noticed on the lead surface. Based on the results of EIS and surface investigations, several models explaining the corrosion behavior of the metals were proposed and discussed. The obtained results demonstrate that all studied metals could be successfully leached using brominated solutions, providing a viable alternative for the selective and efficient recovery of the base metals from WPCBs through a multi-step hydrometallurgical processing route.

| S-EPMC7475910 | biostudies-literature

Inhibition of transition metals dissolution in cobalt-free cathode with ultrathin robust interphase in concentrated electrolyte.

Project description:The low Coulombic efficiency during cycling hinders the application of Cobalt-free lithium-rich materials in lithium-ion batteries. Here we demonstrated that the dissolution of iron, rather than traditionally acknowledged manganese, is mainly responsible for the low Coulombic efficiency of the iron-substituted cobalt-free lithium-rich material. Besides, we presented an approach to inhibit the dissolution of transition metal ions by using concentrated electrolytes. We found that the cathode electrolyte interphase (CEI) layer formed in the concentrated electrolyte is a uniform and robust LiF-rich CEI, which is a sharp contrast with the uneven and fragile organic-rich CEI formed in the dilute electrolyte. The LiF-rich CEI not only effectively inhibits the dissolution of TMs but also stabilizes the cathode structure. The Coulombic efficiency, cycling stability, rate performance, and safety of the Fe-substituted cobalt-free lithium-rich cathode material in the concentrated electrolyte have been improved tremendously.

| S-EPMC7371675 | biostudies-literature

Oxidative Dissolution of Metals in Organic Solvents.

Project description:Dissolution of metals in organic solvents is relevant to various application fields, such as metal extraction from ores or secondary resources, surface etching or polishing of metals, direct synthesis of organometallic compounds, and separation of metals from other compounds. Organic solvents for dissolution of metals can offer a solution when aqueous systems fail, such as separation of metals from metal oxides, because both the metal and metal oxide could codissolve in aqueous acidic solutions. This review critically discusses organic media (conventional molecular organic solvents, ionic liquids, deep-eutectic solvents and supercritical carbon dioxide) for oxidative dissolution of metals in different application areas. The reaction mechanisms of dissolution processes are discussed for various lixiviant systems which generally consist of oxidizing agents, chelating agents, and solvents. Different oxidizing agents for dissolution of metals are reviewed such as halogens, halogenated organics, donor-acceptor electron-transfer systems, polyhalide ionic liquids, and others. Both chemical and electrochemical processes are included. The review can guide researchers to develop more efficient, economic, and environmentally friendly processes for dissolution of metals in their elemental state.

| S-EPMC8154329 | biostudies-literature

Rapid Dissolution of Noble Metals in Organic Solvents.

Project description:The dissolution of elemental noble metals (NMs) such as gold, platinum, palladium, and copper is necessary for their recycling but carries a high environmental burden due to the use of strong acids and toxic reagents. Herein, a new approach was developed for the rapid dissolution of elemental NMs in organic solvents using mixtures of triphenylphosphine dichloride or oxalyl chloride and hydrogen peroxide, forming metal chloride salts directly. Almost quantitative dissolution of metallic Au, Pd, and Cu was observed within minutes at room temperature. For Pt, dissolution was achieved, albeit more slowly, using the chlorinating oxidant alone but was inhibited on addition of hydrogen peroxide. After leaching, transfer of PtIV and PdII chloride salts from the organic phase into a 6 m HCl aqueous phase facilitated their separation by precipitation of PtIV using a simple diamide ligand. In contrast, the retention of AuIII chloridometalate in the organic phase allowed its selective separation from Ni and Cu from a leachate solution obtained from electronic CPUs. This new approach has potential application in the hydrometallurgical leaching and purification of NMs from ores, spent catalysts, and electronic and nano-wastes.

| S-EPMC9804267 | biostudies-literature

Opto-Electrochemical Dissolution Reveals Coccolith Calcium Carbonate Content.

Project description:Coccoliths are plates of biogenic calcium carbonate secreted by calcifying marine phytoplankton; annually these phytoplankton are responsible for exporting >1 billion tonnes (1015 g) of calcite to the deep ocean. Rapid and reliable methods for assessing the degree of calcification are technically challenging because the coccoliths are micron sized and contain picograms (pg) of calcite. Here we pioneer an opto-eletrochemical acid titration of individual coccoliths which allows 3D reconstruction of each individual coccolith via in situ optical imaging enabling direct inference of the coccolith mass. Coccolith mass ranging from 2 to 400 pg are reported herein, evidencing both inter- and intra-species variation over four different species. We foresee this scientific breakthrough, which is independent of knowledge regarding the species and calibration-free, will allow continuous monitoring and reporting of the degree of coccolith calcification in the changing marine environment.

| S-EPMC8518593 | biostudies-literature

Conductive catalysis by subsurface transition metals.

Project description:The nature of catalysis has been hotly pursued for over a century, and current research is focused on understanding active centers and their electronic structures. Herein, the concept of conductive catalysis is proposed and verified by theoretical simulations and experimental observations. Metallic systems containing buried catalytically active transitional metals and exposed catalytically inert main group metals are constructed, and the electronic interaction between them via metallic bonding is disclosed. Through the electronic interaction, the catalytic properties of subsurface transitional metals (Pd or Rh) can be transferred to outermost main group metals (Al or Mg) for several important transformations like semi-hydrogenation, Suzuki-coupling and hydroformylation. The catalytic force is conductive, in analogy with the magnetic force and electrostatic force. The traditional definition of active centers is challenged by the concept of conductive catalysis and the electronic nature of catalysis is more easily understood. It might provide new opportunities for shielding traditional active centers against poisoning or leaching and allow for precise regulation of their catalytic properties by the conductive layer.

| S-EPMC10849361 | biostudies-literature

Dissolution of platinum: limits for the deployment of electrochemical energy conversion?

Project description:Platinum stability: Dissolution of Pt, which is one major degradation mechanism in, for example, hydrogen/air fuel cells, was monitored under potentiodynamic and potentiostatic conditions. The highly sensitive and time-resolving dissolution monitoring enables the distinction between anodic and cathodic dissolution processes during potential transient and chronoamperometric experiments, and the precise quantification of the amount of dissolved Pt.

| S-EPMC3556695 | biostudies-other

Divalent heavy metals and uranyl cations incorporated in calcite change its dissolution process.

Project description:Due to the high capacity of impurities in its structure, calcite is regarded as one of the most attractive minerals to trap heavy metals (HMs) and radionuclides via substitution during coprecipitation/crystal growth. As a high-reactivity mineral, calcite may release HMs via dissolution. However, the influence of the incorporated HMs and radionuclides in calcite on its dissolution is unclear. Herein, we reported the dissolution behavior of the synthesized calcite incorporated with cadmium (Cd), cobalt (Co), nickel (Ni), zinc (Zn), and uranium (U). Our findings indicated that the HMs and U in calcite could significantly change the dissolution process of calcite. The results demonstrated that the incorporated HMs and U had both inhibiting and enhancing effects on the solubility of calcite, depending on the type of metals and their content. Furthermore, secondary minerals such as smithsonite (ZnCO3), Co-poor aragonite, and U-rich calcite precipitated during dissolution. Thus, the incorporation of metals into calcite can control the behavior of HMs/uranium, calcite, and even carbon dioxide.

| S-EPMC7546630 | biostudies-literature

Concurrent occurrence of electrochemical dissolution/deposition of cobalt-calcium phosphate composite.

Project description:Amorphous cobalt-calcium phosphate composite (CCPC) films are electrochemically prepared on various electrodes by utilizing the solid phase of hydroxyapatite as a phosphate source. The CCPC film formation is surface process in which the dissolution of hydroxyapatite and the deposition of CCPC film concurrently occur on the electrode surface without the mass transfer of phosphate ions into the bulk solution. Elemental, crystallographic, and morphological analyses (EDX, ICP-AES, XPS, and XRD) indicate that the CCPC is composed of amorphous cobalt oxide with calcium and phosphate. The film exhibits durable oxygen evolution reaction (OER) catalytic properties under neutral and basic aqueous condition. Compared to using solution phase of phosphate source, our preparation method utilizing solid hydroxyapatite has advantage of preventing unnecessary chemical reaction between phosphate and other chemical species in bulk solution.

| S-EPMC9037991 | biostudies-literature

Transcriptome in yeast by exposure of 7 transition metals

Project description:7 transition metals (silver, arsenic, cadmium, chromium, copper, mercury and zinc) were treated (2hr) on diploid yeast BY4743. Keywords: Response to metals

2008-11-01 | GSE9466 | GEO

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data