Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Real-time UVMS torque distribution algorithm based on weighting matrix.

ABSTRACT: This study presents a real-time algorithm for even distributing the torque burden on the parallel manipulator with an autonomous underwater vehicle (AUV) through the cooperation of the AUV and manipulator. For the redundant resolution of the underwater vehicle manipulator system (UVMS), we used the weighting matrix of the weighted pseudo inverse for kinematic and dynamic modeling. We made dynamic and kinematic modeling using the force distribution characteristics of parallel manipulators. Using the parallel manipulator's model, the weighting matrix was changed every second to share the manipulator torque with the AUV. The Taguchi method was used to reduce the calculation time for real-time calculation and to perform valve rotation operations with as little torque as possible even in an underwater environment where it is difficult to determine any cause of errors. To demonstrate the effectiveness of this algorithm, we experimented with valve rotation in water using the UVMS. Analysis of the experimental results revealed that the manipulator torque load was greatly reduced due to the AUV load distribution.

SUBMITTER: Moon Y

PROVIDER: S-EPMC8253443 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Algorithm for Mobile Platform-Based Real-Time QRS Detection.

Project description:Recent advancements in smart, wearable technologies have allowed the detection of various medical conditions. In particular, continuous collection and real-time analysis of electrocardiogram data have enabled the early identification of pathologic cardiac rhythms. Various algorithms to assess cardiac rhythms have been developed, but these utilize excessive computational power. Therefore, adoption to mobile platforms requires more computationally efficient algorithms that do not sacrifice correctness. This study presents a modified QRS detection algorithm, the AccYouRate Modified Pan-Tompkins (AMPT), which is a simplified version of the well-established Pan-Tompkins algorithm. Using archived ECG data from a variety of publicly available datasets, relative to the Pan-Tompkins, the AMPT algorithm demonstrated improved computational efficiency by 5-20×, while also universally enhancing correctness, both of which favor translation to a mobile platform for continuous, real-time QRS detection.

| S-EPMC9920820 | biostudies-literature

A fast density-based clustering algorithm for real-time Internet of Things stream.

Project description:Data streams are continuously generated over time from Internet of Things (IoT) devices. The faster all of this data is analyzed, its hidden trends and patterns discovered, and new strategies created, the faster action can be taken, creating greater value for organizations. Density-based method is a prominent class in clustering data streams. It has the ability to detect arbitrary shape clusters, to handle outlier, and it does not need the number of clusters in advance. Therefore, density-based clustering algorithm is a proper choice for clustering IoT streams. Recently, several density-based algorithms have been proposed for clustering data streams. However, density-based clustering in limited time is still a challenging issue. In this paper, we propose a density-based clustering algorithm for IoT streams. The method has fast processing time to be applicable in real-time application of IoT devices. Experimental results show that the proposed approach obtains high quality results with low computation time on real and synthetic datasets.

| S-EPMC4090461 | biostudies-other

Development of a Detection Algorithm for Use with Reflectance-Based, Real-Time Chemical Sensing.

Project description:Here, we describe our efforts focused on development of an algorithm for identification of detection events in a real-time sensing application relying on reporting of color values using commercially available color sensing chips. The effort focuses on the identification of event occurrence, rather than target identification, and utilizes approaches suitable to onboard device incorporation to facilitate portable and autonomous use. The described algorithm first excludes electronic noise generated by the sensor system and determines response thresholds. This automatic adjustment provides the potential for use with device variations as well as accommodating differing indicator behaviors. Multiple signal channels (RGB) as well as multiple indicator array elements are combined for reporting of an event with a minimum of false responses. While the method reported was developed for use with paper-supported porphyrin and metalloporphyrin indicators, it should be equally applicable to other colorimetric indicators. Depending on device configurations, receiver operating characteristic (ROC) sensitivities of 1 could be obtained with specificities of 0.87 (threshold 160 ppb, ethanol).

| S-EPMC5134586 | biostudies-literature

FCI: an R-based algorithm for evaluating uncertainty of absolute real-time PCR quantification.

Project description:BackgroundFCI is an R code for analyzing data from real-time PCR experiments. This algorithm estimates standard curve features as well as nucleic acid concentrations and confidence intervals according to Fieller's theorem.ResultsIn order to describe the features of FCI four situations were selected from real data collected during an international external quality assessment program for quantitative assays based on real-time PCR. The code generates a diagnostic figure suitable for assessing the quality of the quantification process.ConclusionWe have provided a freeware programme using this algorithm specifically designed to increase the information content of the real-time PCR assay.

| S-EPMC2245902 | biostudies-literature

Comprehensive algorithm for quantitative real-time polymerase chain reaction.

Project description:Quantitative real-time polymerase chain reactions (qRT-PCR) have become the method of choice for rapid, sensitive, quantitative comparison of RNA transcript abundance. Useful data from this method depend on fitting data to theoretical curves that allow computation of mRNA levels. Calculating accurate mRNA levels requires important parameters such as reaction efficiency and the fractional cycle number at threshold (CT) to be used; however, many algorithms currently in use estimate these important parameters. Here we describe an objective method for quantifying qRT-PCR results using calculations based on the kinetics of individual PCR reactions without the need of the standard curve, independent of any assumptions or subjective judgments which allow direct calculation of efficiency and CT. We use a four-parameter logistic model to fit the raw fluorescence data as a function of PCR cycles to identify the exponential phase of the reaction. Next, we use a three-parameter simple exponent model to fit the exponential phase using an iterative nonlinear regression algorithm. Within the exponential portion of the curve, our technique automatically identifies candidate regression values using the P-value of regression and then uses a weighted average to compute a final efficiency for quantification. For CT determination, we chose the first positive second derivative maximum from the logistic model. This algorithm provides an objective and noise-resistant method for quantification of qRT-PCR results that is independent of the specific equipment used to perform PCR reactions.

| S-EPMC2716216 | biostudies-literature

Real-time Concealed Object Detection from Passive Millimeter Wave Images Based on the YOLOv3 Algorithm.

Project description:The detection of objects concealed under people's clothing is a very challenging task, which has crucial applications for security. When testing the human body for metal contraband, the concealed targets are usually small in size and are required to be detected within a few seconds. Focusing on weapon detection, this paper proposes using a real-time detection method for detecting concealed metallic weapons on the human body applied to passive millimeter wave (PMMW) imagery based on the You Only Look Once (YOLO) algorithm, YOLOv3, and a small sample dataset. The experimental results from YOLOv3-13, YOLOv3-53, and Single Shot MultiBox Detector (SSD) algorithm, SSD-VGG16, are compared ultimately, using the same PMMW dataset. For the perspective of detection accuracy, detection speed, and computation resource, it shows that the YOLOv3-53 model had a detection speed of 36 frames per second (FPS) and a mean average precision (mAP) of 95% on a GPU-1080Ti computer, more effective and feasible for the real-time detection of weapon contraband on human body for PMMW images, even with small sample data.

| S-EPMC7147325 | biostudies-literature

Real Time FRET Based Detection of Mechanical Stress in Cytoskeletal and Extracellular Matrix Proteins.

Project description:A molecular force sensing cassette (stFRET) was incorporated into actinin, filamin, and spectrin in vascular endothelial cells (BAECs) and into collagen-19 in Caenorhabditis elegans. To estimate the stress sensitivity of stFRET in solution, we used DNA springs. A 60-mer loop of single stranded DNA was covalently linked to the external cysteines of the donor and acceptor. When the complementary DNA was added it formed double stranded DNA with higher persistence length, stretching the linker and substantially reducing FRET efficiency. The probe stFRET detected constitutive stress in all cytoskeletal proteins tested, and in migrating cells the stress was greater at the leading edge than the trailing edge. The stress in actinin, filamin and spectrin could be reduced by releasing focal attachments from the substrate with trypsin. Inhibitors of actin polymerization produced a modest increase in stress on the three proteins suggesting they are mechanically in parallel. Local shear stress applied to the cell with a perfusion pipette showed gradients of stress leading from the site of perfusion. Transgenic C. elegans labeled in collagen-19 produced a behaviorally and anatomically normal animal with constitutive stress in the cuticle. Stretching the worm visibly stretched the probe in collagen showing that we can trace the distribution of mean tissue stress in specific molecules. stFRET is a general purpose dynamic sensor of mechanical stress that can be expressed intracellularly and extracellularly in isolated proteins, cells, tissues, organs and animals.

| S-EPMC3101475 | biostudies-literature

Epidemic monitoring in real-time based on dynamic grid search and Monte Carlo numerical simulation algorithm.

Project description:Building upon the foundational principles of the grid search algorithm and Monte Carlo numerical simulation, this article introduces an innovative epidemic monitoring and prevention plan. The plan offers the capability to accurately identify the sources of infectious diseases and predict the final scale and duration of the epidemic. The proposed plan is implemented in schools and society, utilizing computer simulation analysis. Through this analysis, the plan enables precise localization of infection sources for various demographic groups, with an error rate of less than 3%. Additionally, the plan allows for the estimation of the epidemic cycle duration, which typically spans around 14 days. Notably, higher population density enhances fault tolerance and prediction accuracy, resulting in smaller errors and more reliable simulation outcomes. Overall, this study provides highly valuable theoretical guidance for effective epidemic prevention and control efforts.

| S-EPMC10403190 | biostudies-literature

Real-time estimation and prediction of mortality caused by COVID-19 with patient information based algorithm.

Project description:The global COVID-19 outbreak is worrisome both for its high rate of spread, and the high case fatality rate reported by early studies and now in Italy. We report a new methodology, the Patient Information Based Algorithm (PIBA), for estimating the death rate of a disease in real-time using publicly available data collected during an outbreak. PIBA estimated the death rate based on data of the patients in Wuhan and then in other cities throughout China. The estimated days from hospital admission to death was 13 (standard deviation (SD), 6 days). The death rates based on PIBA were used to predict the daily numbers of deaths since the week of February 25, 2020, in China overall, Hubei province, Wuhan city, and the rest of the country except Hubei province. The death rate of COVID-19 ranges from 0.75% to 3% and may decrease in the future. The results showed that the real death numbers had fallen into the predicted ranges. In addition, using the preliminary data from China, the PIBA method was successfully used to estimate the death rate and predict the death numbers of the Korean population. In conclusion, PIBA can be used to efficiently estimate the death rate of a new infectious disease in real-time and to predict future deaths. The spread of 2019-nCoV and its case fatality rate may vary in regions with different climates and temperatures from Hubei and Wuhan. PIBA model can be built based on known information of early patients in different countries.

| S-EPMC7139242 | biostudies-literature

Helix Matrix Transformation Combined With Convolutional Neural Network Algorithm for Matrix-Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry-Based Bacterial Identification.

Project description:Matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) analysis is a rapid and reliable method for bacterial identification. Classification algorithms, as a critical part of the MALDI-TOF MS analysis approach, have been developed using both traditional algorithms and machine learning algorithms. In this study, a method that combined helix matrix transformation with a convolutional neural network (CNN) algorithm was presented for bacterial identification. A total of 14 bacterial species including 58 strains were selected to create an in-house MALDI-TOF MS spectrum dataset. The 1D array-type MALDI-TOF MS spectrum data were transformed through a helix matrix transformation into matrix-type data, which was fitted during the CNN training. Through the parameter optimization, the threshold for binarization was set as 16 and the final size of a matrix-type data was set as 25 × 25 to obtain a clean dataset with a small size. A CNN model with three convolutional layers was well trained using the dataset to predict bacterial species. The filter sizes for the three convolutional layers were 4, 8, and 16. The kernel size was three and the activation function was the rectified linear unit (ReLU). A back propagation neural network (BPNN) model was created without helix matrix transformation and a convolution layer to demonstrate whether the helix matrix transformation combined with CNN algorithm works better. The areas under the receiver operating characteristic (ROC) curve of the CNN and BPNN models were 0.98 and 0.87, respectively. The accuracies of the CNN and BPNN models were 97.78 ± 0.08 and 86.50 ± 0.01, respectively, with a significant statistical difference (p < 0.001). The results suggested that helix matrix transformation combined with the CNN algorithm enabled the feature extraction of the bacterial MALDI-TOF MS spectrum, which might be a proposed solution to identify bacterial species.

| S-EPMC7693542 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data