Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Ultrasensitive nano-optomechanical force sensor operated at dilution temperatures.

ABSTRACT: Cooling down nanomechanical force probes is a generic strategy to enhance their sensitivities through the concomitant reduction of their thermal noise and mechanical damping rates. However, heat conduction becomes less efficient at low temperatures, which renders difficult to ensure and verify their proper thermalization. Here we implement optomechanical readout techniques operating in the photon counting regime to probe the dynamics of suspended silicon carbide nanowires in a dilution refrigerator. Readout of their vibrations is realized with sub-picowatt optical powers, in a situation where less than one photon is collected per oscillation period. We demonstrate their thermalization down to 32 ± 2 mK, reaching very large sensitivities for scanning probe force sensors, 40 zN Hz^-1/2, with a sensitivity to lateral force field gradients in the fN m^-1 range. This opens the road toward explorations of the mechanical and thermal conduction properties of nanoresonators at minimal excitation level, and to nanomechanical vectorial imaging of faint forces at dilution temperatures.

SUBMITTER: Fogliano F

PROVIDER: S-EPMC8257768 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Integrated nano-optomechanical displacement sensor with ultrawide optical bandwidth.

Project description:Optical read-out of motion is widely used in sensing applications. Recent developments in micro- and nano-optomechanical systems have given rise to on-chip mechanical sensing platforms, potentially leading to compact and integrated optical motion sensors. However, these systems typically exploit narrow spectral resonances and therefore require tuneable lasers with narrow linewidth and low spectral noise, which makes the integration of the read-out extremely challenging. Here, we report a step towards the practical application of nanomechanical sensors, by presenting a sensor with ultrawide (?80?nm) optical bandwidth. It is based on a nanomechanical, three-dimensional directional coupler with integrated dual-channel waveguide photodiodes, and displays small displacement imprecision of only 45?fm/Hz1/2 as well as large dynamic range (>30?nm). The broad optical bandwidth releases the need for a tuneable laser and the on-chip photocurrent read-out replaces the external detector, opening the way to fully-integrated nanomechanical sensors.

| S-EPMC7228956 | biostudies-literature

Force sensitivity of multilayer graphene optomechanical devices.

Project description:Mechanical resonators based on low-dimensional materials are promising for force and mass sensing experiments. The force sensitivity in these ultra-light resonators is often limited by the imprecision in the measurement of the vibrations, the fluctuations of the mechanical resonant frequency and the heating induced by the measurement. Here, we strongly couple multilayer graphene resonators to superconducting cavities in order to achieve a displacement sensitivity of 1.3?fm?Hz(-1/2). This coupling also allows us to damp the resonator to an average phonon occupation of 7.2. Our best force sensitivity, 390?zN?Hz(-1/2) with a bandwidth of 200?Hz, is achieved by balancing measurement imprecision, optomechanical damping, and measurement-induced heating. Our results hold promise for studying the quantum capacitance of graphene, its magnetization, and the electron and nuclear spins of molecules adsorbed on its surface.

| S-EPMC4980493 | biostudies-literature

Multipurpose Polymer Bragg Grating-Based Optomechanical Sensor Pad.

Project description:Flexible epoxy waveguide Bragg gratings are fabricated on a low-modulus TPX™ polymethylpentene polyolefin substrate for an easy to manufacture and low-cost optomechanical sensor pad providing exceedingly multipurpose application potentials. Rectangular EpoCore negative resist strip waveguides are formed employing standard UV mask lithography. Highly persistent Bragg gratings are inscribed directly into the channel waveguides by permanently modifying the local refractive indices through a well-defined KrF excimer laser irradiated +1/-1 order phase mask. The reproducible and vastly versatile sensing capabilities of this easy-to-apply optomechanical sensor pad are demonstrated in the form of an optical pickup for acoustic instruments, a broadband optical accelerometer, and a biomedical vital sign sensor monitoring both respiration and pulse at the same time.

| S-EPMC6806228 | biostudies-literature

Realization of palladium-based optomechanical cantilever hydrogen sensor.

Project description:Hydrogen has attracted attention as an alternative fuel source and as an energy storage medium. However, the flammability of hydrogen at low concentrations makes it a safety concern. Thus, gas concentration measurements are a vital safety issue. Here we present the experimental realization of a palladium thin film cantilever optomechanical hydrogen gas sensor. We measured the instantaneous shape of the cantilever to nanometer-level accuracy using diffraction phase microscopy. Thus, we were able to quantify changes in the curvature of the cantilever as a function of hydrogen concentration and observed that the sensor's minimum detection limit was well below the 250 p.p.m. limit of our test equipment. Using the change in curvature versus the hydrogen curve for calibration, we accurately determined the hydrogen concentrations for a random sequence of exposures. In addition, we calculated the change in film stress as a function of hydrogen concentration and observed a greater sensitivity at lower concentrations.

| S-EPMC6445021 | biostudies-literature

Fluorographene based Ultrasensitive Ammonia Sensor.

Project description:Single molecule detection using graphene can be brought by tuning the interactions via specific dopants. Electrostatic interaction between the most electronegative element fluorine (F) and hydrogen (H) is one of the strong interactions in hydrogen bonding, and here we report the selective binding of ammonia/ammonium with F in fluorographene (FG) resulting to a change in the impedance of the system. Very low limit of detection value of ~0.44 pM with linearity over wide range of concentrations (1 pM-0.1??M) is achieved using the FG based impedance sensor, andthisscreen printed FG sensor works in both ionized (ammonium) and un-ionized ammonia sensing platforms. The interaction energies of FG and NH3/NH4(+) are evaluated using density functional theory calculations and the interactions are mapped. Here FGs with two different amounts of fluorinecontents -~5 atomic% (C39H16F2) and ~24 atomic% (C39H16F12) - are theoretically and experimentally studied for selective, high sensitive and ultra-low level detection of ammonia. Fast responding, high sensitive, large area patternable FG based sensor platform demonstrated here can open new avenues for the development of point-of-care devices and clinical sensors.

| S-EPMC4855224 | biostudies-literature

Nano metamaterials for ultrasensitive Terahertz biosensing.

Project description:As a candidate for a rapid detection of biomaterials, terahertz (THz) spectroscopy system can be considered with some advantage in non-destructive, label-free, and non-contact manner. Because protein-ligand binding energy is in the THz range, especially, most important conformational information in molecular interactions can be captured by THz electromagnetic wave. Based on the THz time-domain spectroscopy system, THz nano-metamaterial sensing chips were prepared for great enhancing of detection sensitivity. A metamaterial sensing chip was designed for increasing of absorption cross section of the target sample, related to the transmitted THz near field enhancement via the composition of metamaterial. The measured THz optical properties were then analyzed in terms of refractive index and absorption coefficient, and compared with simulation results. Also, virus quantification regarding various concentrations of the viruses was performed, showing a clear linearity. The proposed sensitive and selective THz detection method can provide abundant information of detected biomaterials to help deep understanding of fundamental optical characteristics of them, suggesting rapid diagnosis way especially useful for such dangerous and time-sensitive target biomaterials.

| S-EPMC5557762 | biostudies-literature

Tailoring Optical Forces Behavior in Nano-optomechanical Devices Immersed in Fluid Media.

Project description:Emerging nano-optofluidic devices have allowed a synergetic relation between photonic integrated circuits and microfluidics, allowing manipulation and transport at the realm of nanoscale science. Simultaneously, optical gradient forces have allowed highly precise control of mechanical motion in nano-optomechanical devices. In this report, we show that the repulsive optical forces of the antisymmetric eigenmodes in an optomechanical device, based on a slot-waveguide structure, increases as the refraction index of the fluid medium increases. This effect provides a feasible way to tailor the repulsive optical forces when these nano-optomechanical devices are immersed in dielectric liquids. Furthermore, the total control of the attractive and repulsive optical forces inside liquids may be applied to design novel nanophotonic devices, containing both microfluidic and nanomechanical functionalities, which may find useful applications in several areas, such as biomedical sensors, manipulators and sorters, amongst others.

| S-EPMC5662605 | biostudies-literature

Diffraction-limited ultrasensitive molecular nano-arrays with singular nano-cone scattering.

Project description:Large-library fluorescent molecular arrays remain limited in sensitivity (1 × 10(6) molecules) and dynamic range due to background auto-fluorescence and scattering noise within a large (20-100 μm) fluorescent spot. We report an easily fabricated silica nano-cone array platform, with a detection limit of 100 molecules and a dynamic range that spans 6 decades, due to point (10 nm to 1 μm) illumination of preferentially absorbed tagged targets by singular scattering off wedged cones. Its fluorescent spot reaches diffraction-limited submicron dimensions, which are 10(4) times smaller in area than conventional microarrays, with comparable reduction in detection limit and amplification of dynamic range.

| S-EPMC3971819 | biostudies-other

A Chip-Scale Oscillation-Mode Optomechanical Inertial Sensor Near the Thermodynamical Limits.

Project description:Modern navigation systems integrate the global positioning system (GPS) with an inertial navigation system (INS), which complement each other for correct attitude and velocity determination. The core of the INS integrates accelerometers and gyroscopes used to measure forces and angular rate in the vehicular inertial reference frame. With the help of gyroscopes and by integrating the acceleration to compute velocity and distance, precision and compact accelerometers with sufficient accuracy can provide small-error location determination. Solid-state implementations, through coherent readout, can provide a platform for high performance acceleration detection. In contrast to prior accelerometers using piezoelectric or capacitive readout techniques, optical readout provides narrow-linewidth high-sensitivity laser detection along with low-noise resonant optomechanical transduction near the thermodynamical limits. Here an optomechanical inertial sensor with an 8.2 μg Hz-1/2 velocity random walk (VRW) at an acquisition rate of 100 Hz and 50.9 μg bias instability is demonstrated, suitable for applications, such as, inertial navigation, inclination sensing, platform stabilization, and/or wearable device motion detection. Driven into optomechanical sustained-oscillation, the slot photonic crystal cavity provides radio-frequency readout of the optically-driven transduction with an enhanced 625 μg Hz-1 sensitivity. Measuring the optomechanically-stiffened oscillation shift, instead of the optical transmission shift, provides a 220× VRW enhancement over pre-oscillation mode detection.

| S-EPMC8549854 | biostudies-literature

Biodegradable Piezoelectric Force Sensor.

Project description:Measuring vital physiological pressures is important for monitoring health status, preventing the buildup of dangerous internal forces in impaired organs, and enabling novel approaches of using mechanical stimulation for tissue regeneration. Pressure sensors are often required to be implanted and directly integrated with native soft biological systems. Therefore, the devices should be flexible and at the same time biodegradable to avoid invasive removal surgery that can damage directly interfaced tissues. Despite recent achievements in degradable electronic devices, there is still a tremendous need to develop a force sensor which only relies on safe medical materials and requires no complex fabrication process to provide accurate information on important biophysiological forces. Here, we present a strategy for material processing, electromechanical analysis, device fabrication, and assessment of a piezoelectric Poly-l-lactide (PLLA) polymer to create a biodegradable, biocompatible piezoelectric force sensor, which only employs medical materials used commonly in Food and Drug Administration-approved implants, for the monitoring of biological forces. We show the sensor can precisely measure pressures in a wide range of 0-18 kPa and sustain a reliable performance for a period of 4 d in an aqueous environment. We also demonstrate this PLLA piezoelectric sensor can be implanted inside the abdominal cavity of a mouse to monitor the pressure of diaphragmatic contraction. This piezoelectric sensor offers an appealing alternative to present biodegradable electronic devices for the monitoring of intraorgan pressures. The sensor can be integrated with tissues and organs, forming self-sensing bionic systems to enable many exciting applications in regenerative medicine, drug delivery, and medical devices.

| S-EPMC5798324 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data