Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Innovative color jet 3D printing of levetiracetam personalized paediatric preparations.

ABSTRACT: 3D printing is a promising technology used in the fabrication of complex oral dosage delivery pharmaceuticals. This study first reports an innovative color jet 3D printing (CJ-3DP) technology to produce colorful cartoon levetiracetam pediatric preparations with high accuracy and reproducibility. For this study, the ideal printing ink consisted of 40% (v/v) isopropanol aqueous solution containing 0.05% (w/w) polyvinylpyrrolidone and 4% (w/w) glycerin, which was satisfied with scale-up of the production. The external and internal spatial structures of the tablets were designed to control the appearance and release, and cartoon tablets with admirable appearances and immediate release characteristics were printed. The dosage model showed a good linear relationship between the model volume and the tablet strength (r > 0.999), which proved the potential of personalized administration. The surface roughness indicated that the appearance of the CJ-3DP tablets was significantly better than the first listed 3D printed drug (Spritam^Ⓡ). Moreover, the scanning electron microscopy and porosity results further showed that the tablets have a structure of loose interior and tight exterior, which could ensure good mechanical properties and rapid dispersion characteristics simultaneously. In conclusion, the innovative CJ-3DP technology can be used to fabricate personalized pediatric preparations for improved compliance. Due to the stable formulation and fabrication process, this technology has the potential in scale-up production.

SUBMITTER: Wang Z

PROVIDER: S-EPMC8261256 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

3D Printing of Personalized Artificial Bone Scaffolds.

Project description:Additive manufacturing technologies, including three-dimensional printing (3DP), have unlocked new possibilities for bone tissue engineering. Long-term regeneration of normal anatomic structure, shape, and function is clinically important subsequent to bone trauma, tumor, infection, nonunion after fracture, or congenital abnormality. Due to the great complexity in structure and properties of bone across the population, along with variation in the type of injury or defect, currently available treatments for larger bone defects that support load often fail in replicating the anatomic shape and structure of the lost bone tissue. 3DP could provide the ability to print bone substitute materials with a controlled chemistry, shape, porosity, and topography, thus allowing printing of personalized bone grafts customized to the patient and the specific clinical condition. 3DP and related fabrication approaches of bone grafts may one day revolutionize the way clinicians currently treat bone defects. This article gives a brief overview of the current advances in 3DP and existing materials with an emphasis on ceramics used for 3DP of bone scaffolds. Furthermore, it addresses some of the current limitations of this technique and discusses potential future directions and strategies for improving fabrication of personalized artificial bone constructs.

| S-EPMC4981149 | biostudies-other

Ultrafast 3D printing with submicrometer features using electrostatic jet deflection.

Project description:Additive manufacturing technologies based on layer-by-layer deposition of material ejected from a nozzle provide unmatched versatility but are limited in terms of printing speed and resolution. Electrohydrodynamic jetting uniquely allows generating submicrometer jets that can reach speeds above 1?m?s-1, but such jets cannot be precisely collected by too slow mechanical stages. Here, we demonstrate that controlling the voltage applied to electrodes located around the jet, its trajectory can be continuously adjusted with lateral accelerations up to 106?m?s-2. Through electrostatically deflecting the jet, 3D objects with submicrometer features can be printed by stacking nanofibers on top of each other at layer-by-layer frequencies as high as 2000 Hz. The fast jet speed and large layer-by-layer frequencies achieved translate into printing speeds up to 0.5?m?s-1 in-plane and 0.4?mm?s-1 in the vertical direction, three to four orders of magnitude faster than techniques providing equivalent feature sizes.

| S-EPMC7005155 | biostudies-literature

Aerosol Jet Printing of 3D Pillar Arrays from Photopolymer Ink.

Project description:An aerosol jet printing (AJP) printing head built on top of precise motion systems can provide positioning deviation down to 3 μm, printing areas as large as 20 cm × 20 cm × 30 cm, and five-axis freedom of movement. Typical uses of AJP are 2D printing on complex or flexible substrates, primarily for applications in printed electronics. Nearly all commercially available AJP inks for 2D printing are designed and optimized to reach desired electronic properties. In this work, we explore AJP for the 3D printing of free-standing pillar arrays. We utilize aryl epoxy photopolymer as ink coupled with a cross-linking "on the fly" technique. Pillar structures 550 μm in height and with a diameter of 50 μm were 3D printed. Pillar structures were characterized via scanning electron microscopy, where the morphology, number of printed layers and side effects of the AJP technique were investigated. Satellite droplets and over-spray seem to be unavoidable for structures smaller than 70 μm. Nevertheless, reactive ion etching (RIE) as a post-processing step can mitigate AJP side effects. AJP-RIE together with photopolymer-based ink can be promising for the 3D printing of microstructures, offering fast and maskless manufacturing without wet chemistry development and heat treatment post-processing.

| S-EPMC9412835 | biostudies-literature

3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts.

Project description:Generation of thick vascularized tissues that fully match the patient still remains an unmet challenge in cardiac tissue engineering. Here, a simple approach to 3D-print thick, vascularized, and perfusable cardiac patches that completely match the immunological, cellular, biochemical, and anatomical properties of the patient is reported. To this end, a biopsy of an omental tissue is taken from patients. While the cells are reprogrammed to become pluripotent stem cells, and differentiated to cardiomyocytes and endothelial cells, the extracellular matrix is processed into a personalized hydrogel. Following, the two cell types are separately combined with hydrogels to form bioinks for the parenchymal cardiac tissue and blood vessels. The ability to print functional vascularized patches according to the patient's anatomy is demonstrated. Blood vessel architecture is further improved by mathematical modeling of oxygen transfer. The structure and function of the patches are studied in vitro, and cardiac cell morphology is assessed after transplantation, revealing elongated cardiomyocytes with massive actinin striation. Finally, as a proof of concept, cellularized human hearts with a natural architecture are printed. These results demonstrate the potential of the approach for engineering personalized tissues and organs, or for drug screening in an appropriate anatomical structure and patient-specific biochemical microenvironment.

| S-EPMC6548966 | biostudies-literature

Probing Ink-Powder Interactions during 3D Binder Jet Printing Using Time-Resolved X-ray Imaging.

Project description:Capillary-driven ink infiltration through a porous powder bed in three-dimensional (3D) binder jet printing (inkjet printing onto a powder bed) controls the printing resolution and as-printed "green" strength of the resulting object. However, a full understanding of the factors controlling the kinetics of the infiltration remains incomplete. Here, high-resolution in situ synchrotron radiography provides time-resolved imaging of the penetration of an aqueous solution of eythylene glycol through a porous alumina powder bed, used as a model system. A static drop-on-demand inkjet printer was used to dispense liquid droplets onto a powder surface. The subsequent migration of the liquid front and its interactions with powder particles were tracked using fast synchrotron X-radiography in the Diamond Synchrotron, with phase-contrast imaging at a frame rate of 500 Hz. Image processing and analysis reveal that both the time-dependent increment in the wetting area and the propagation of the "interface leading edge" exhibit heterogeneous behavior in both temporal and spatial domains. However, mean infiltration kinetics are shown to be consistent with existing infiltration models based on the Washburn equation modified to account for the spreading of the liquid drop on the powder surface and using a modified term for the bed porosity.

| S-EPMC7467558 | biostudies-literature

Jet-Printing Microfluidic Devices on Demand.

Project description:There is an unmet demand for microfluidics in biomedicine. This paper describes contactless fabrication of microfluidic circuits on standard Petri dishes using just a dispensing needle, syringe pump, three-way traverse, cell-culture media, and an immiscible fluorocarbon (FC40). A submerged microjet of FC40 is projected through FC40 and media onto the bottom of a dish, where it washes media away to leave liquid fluorocarbon walls pinned to the substrate by interfacial forces. Such fluid walls can be built into almost any imaginable 2D circuit in minutes, which is exploited to clone cells in a way that beats the Poisson limit, subculture adherent cells, and feed arrays of cells continuously for a week. This general method should have wide application in biomedicine.

| S-EPMC7709972 | biostudies-literature

Integrating 3D Printing and Biomimetic Mineralization for Personalized Enhanced Osteogenesis, Angiogenesis, and Osteointegration.

Project description:Titanium (Ti) alloy implants can repair bone defects at load-bearing sites. However, they mechanically mismatch with the natural bone and lack customized adaption with the irregularly major-sized load-bearing bone defects, resulting in the failure of implant fixation. Mineralized collagen (MC), a building block in bone, can induce angiogenesis and osteogenesis, and 3D printing technology can be employed to prepare scaffolds with an overall shape customized to the bone defect. Hence, we induced the formation of MC, made of hydroxyapatite (HAp) nanocrystals and collagen fibers, in 3D-printed porous Ti6Al4V (PT) scaffolds through in situ biomimetic mineralization. The resultant MC/PT scaffolds exhibited a bone-like Young's modulus and were customized to the anatomical contour of actual bone defects of rabbit model. We found that the biocompatibility and osteogenic differentiation are best when the mass ratio between HAp nanocrystals and collagen fibers is 1 in MC. We then implanted the MC/PT scaffolds into the customized radius defect rabbit model and found that the MC/PT scaffolds significantly improved the vascularized bone tissue formation and integration between new bone and the implants. Therefore, a combination of 3D printing and biomimetic mineralization could lead to customized 3D PT scaffolds for enhanced angiogenesis, osteogenesis, and osteointegration. Such scaffolds represent novel patient-specific implants for precisely repairing irregular major-sized load-bearing bone defects.

| S-EPMC6456406 | biostudies-literature

3D printing of a wearable personalized oral delivery device: A first-in-human study.

Project description:Despite the burgeoning interest in three-dimensional (3D) printing for the manufacture of customizable oral dosage formulations, a U.S. Food and Drug Administration-approved tablet notwithstanding, the full potential of 3D printing in pharmaceutical sciences has not been realized. In particular, 3D-printed drug-eluting devices offer the possibility for personalization in terms of shape, size, and architecture, but their clinical applications have remained relatively unexplored. We used 3D printing to manufacture a tailored oral drug delivery device with customizable design and tunable release rates in the form of a mouthguard and, subsequently, evaluated the performance of this system in the native setting in a first-in-human study. Our proof-of-concept work demonstrates the immense potential of 3D printing as a platform for the development and translation of next-generation drug delivery devices for personalized therapy.

| S-EPMC5942915 | biostudies-literature

Tunable structural color of bottlebrush block copolymers through direct-write 3D printing from solution.

Project description:Additive manufacturing of functional materials is limited by control of microstructure and assembly at the nanoscale. In this work, we integrate nonequilibrium self-assembly with direct-write three-dimensional (3D) printing to prepare bottlebrush block copolymer (BBCP) photonic crystals (PCs) with tunable structure color. After varying deposition conditions during printing of a single ink solution, peak reflected wavelength for BBCP PCs span a range of 403 to 626 nm (blue to red), corresponding to an estimated change in d-spacing of >70 nm (Bragg- Snell equation). Physical characterization confirms that these vivid optical effects are underpinned by tuning of lamellar domain spacing, which we attribute to modulation of polymer conformation. Using in situ optical microscopy and solvent-vapor annealing, we identify kinetic trapping of metastable microstructures during printing as the mechanism for domain size control. More generally, we present a robust processing scheme with potential for on-the-fly property tuning of a variety of functional materials.

| S-EPMC7286684 | biostudies-literature

Digitally Driven Aerosol Jet Printing to Enable Customisable Neuronal Guidance.

Project description:Digitally driven manufacturing technologies such as aerosol jet printing (AJP) can make a significant contribution to enabling new capabilities in the field of tissue engineering disease modeling and drug screening. AJP is an emerging non-contact and mask-less printing process which has distinct advantages over other patterning technologies as it offers versatile, high-resolution, direct-write deposition of a variety of materials on planar and non-planar surfaces. This research demonstrates the ability of AJP to print digitally controlled patterns that influence neuronal guidance. These consist of patterned poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) tracks on both glass and poly(potassium 3-sulfopropyl methacrylate) (PKSPMA) coated glass surfaces, promoting selective adhesion of SH-SY5Y neuroblastoma cells. The cell attractive patterns had a maximum height ≥0.2 μm, width and half height ≥15 μm, Ra = 3.5 nm, and RMS = 4.1. The developed biocompatible PEDOT:PSS ink was shown to promote adhesion, growth and differentiation of SH-SY5Y neuronal cells. SH-SY5Y cells cultured directly onto these features exhibited increased nuclei and neuronal alignment on both substrates. In addition, the cell adhesion to the substrate was selective when cultured onto the PKSPMA surfaces resulting in a highly organized neural pattern. This demonstrated the ability to rapidly and flexibly realize intricate and accurate cell patterns by a computer controlled process.

| S-EPMC8435718 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data