Surface related laser induced white emission of Cr:YAG ceramic.
Ontology highlight
ABSTRACT:
SUBMITTER: Chaika M
PROVIDER: S-EPMC8263758 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Non-resonant lasers exhibit the potential for stable and consistent narrowband light sources. Furthermore, non-resonant lasers do not require well-defined optics, and thus has considerably diversified the available types of laser gain materials including powders, films, and turbid ceramics. Despite these intrinsic advantages, the practical applications of non-resonant lasers have been limited so far, mainly because of their low power efficiency and omnidirectional emission. To overcome these limitations, here we propose a light trap design for non-resonant lasers based on a spherical scattering cavity with a small entrance. Using a porous Nd3+:YAG ceramic, directional laser emission could be observed with significant enhancements in the slope efficiency and linewidth (down to 32 pm). A theoretical model is also developed to describe and predict the operation characteristics of proposed non-resonant laser.
| S-EPMC7782720 | biostudies-literature
Project description:In the last decade, the success of lasers in simplifying many dental procedures has heightened the need for research in the orthodontic field, in order to evaluate the benefits of laser-assisted ceramic brackets debonding. Conventional ceramic brackets removal delivers a high shear bond strength (SBS), which might lead to enamel damage. Nowadays, debonding ceramic brackets by Er:YAG laser seems a viable alternative technique; however, there is no data on the use of Er,Cr:YSGG in the literature. We aimed to evaluate the difference in enamel topography derived from different erbium laser settings used during debonding. One hundred and eighty bovine incisors teeth were randomly divided into fifteen experimental groups, according to different erbium laser settings using scanning methods. SBS testing was performed after debonding; stereomicroscopic and SEM analyses were done after cleaning the remaining adhesive so as to assess the incidence of enamel microcracks formation and enamel loss. There were no statistically significant differences between the proportions of teeth with normal enamel topography within the control group when compared with any of the Er:YAG groups. However, the proportion of teeth with a normal enamel topography in Er,Cr:YSGG was 4 W/20 Hz (83.3%) and in Er:YAG was 5 W/20 Hz (91.7%), which was statistically significantly higher than the control group (41.7%). The selection of erbium lasers' optimal parameters during debonding influences the enamel topography. When considering the evaluation of both microscopic and statistical analyses, irradiation by Er:YAG (120 mJ/40 Hz) displayed a significant reduction in microcracks compared with conventional debonding, even though some microstructural changes in the enamel could be noted. Er,Cr:YSGG (4 W/20 Hz) respected the enamel topography the most out of the studied groups.
| S-EPMC7175227 | biostudies-literature
Project description:White lasers are becoming increasingly relevant in various fields since they exhibit unprecedented properties in terms of beam brightness and intensity modulation. Here we introduce a white laser based on a polymer matrix encompassing liquid crystals and multiple organic chromophores in a multifunctional phase-separation system. The separation of the hydrophilic matrix and the hydrophobic liquid crystals leads to the formation of a complex optically active layer, featuring lasing emission tuneable from blue to red. White laser emission is found with an optical excitation threshold of approximately 12 mJ/cm2. Importantly, an external electric field can be used to control the device emission intensity. White lasers with low-voltage (≤10 V) controllable emission might pave the way for a new generation of broadband light sources for analytical, computational, and communication applications.
| S-EPMC7012818 | biostudies-literature
Project description:The operation of a mid-infrared laser at 2244 nm in a Cr:ZnS polycrystalline channel waveguide fabricated using direct femtosecond laser writing with a helical movement technique is demonstrated. A maximum power output of 78 mW and an optical-to-optical slope efficiency of 8.6% are achieved. The compact waveguide structure with 2 mm length was obtained through direct femtosecond laser writing, which was moved on a helical trajectory along the laser medium axis and parallel to the writing direction.
| S-EPMC4686910 | biostudies-other
Project description:BackgroundScaling and root planing (SRP) is an inevitable primary step in non-surgical periodontal therapy. Debridement carried out with manual instruments and ultrasonics results in the removal of tooth structure. Current research revolves around laser as an efficient adjunct to SRP. This study evaluated and compared the effectiveness of root surface calculus removal between ultrasonics and Er,Cr:YSGG laser.MethodsTwenty-eight single-rooted teeth extracted due to periodontal disease were selected for the study. The specimens were randomly assigned to two groups (n=14). Group I underwent ultrasonic instrumentation using a piezo ultrasonic scaler, and group II was subjected to laser instrumentation using Er,Cr:YSGG laser (Waterlase). The specimens were processed, fixed, viewed under a field emission scanning electron microscope and evaluated using the remaining calculus index (RCI) and loss of tooth substance index (LTSI).ResultsUltrasonics-treated specimens revealed more remaining calculus (1.57±0.65) and lost tooth substance (1.71±0.61) compared to the Er,Cr:YSGG laser-treated specimens, with significantly lower RCI (0.71±0.61) and LTSI (1.00±0.56). There was a statistically significant difference (P<0.05) in the efficacy of root surface calculus removal between the two groups.ConclusionCompared to ultrasonics, Er,Cr:YSGG laser demonstrated superior results by causing precise removal of root surface calculus without significantly affecting tooth structure and aiding in new attachment.
| S-EPMC11252148 | biostudies-literature
Project description:Displaying a full or tuneable emission spectrum with highly efficient is significant for luminescent materials used in solid-state lighting. Silicon carbide (SiC) has potential for use in photoelectric devices that operate under extreme conditions. In this paper, we present a method to selectively modify the photoluminescence (PL) properties of SiC by ultrafast laser direct writing. Based on this method, visible white PL could be observed by the naked eye at room temperature under ultraviolet excitation. By increasing the laser power intensity from 40 to 80 MW/cm2, the PL of the irradiated samples increased and pure white sunlight-like emission with controlled colour temperature was realised. The optimised laser power intensity of 65 MW/cm2 achieved a desirable colour temperature similar to that of sunlight (x = 0.33, y = 0.33 and colour temperature of 5500 K) and suppressed blue emission. By direct laser irradiation along designed scanning path, a large-scale and arbitrary pattern white emission was fabricated. The origin of the white luminescence was a mixture of multiple luminescent transitions of oxygen-related centres that turned the Si-C system into silicon oxycarbide. This work sheds light on new luminescent materials and a preparation technique for next-generation lighting devices.
| S-EPMC5762700 | biostudies-literature
Project description:The laser formation of positive and negative ions on a nanostructured metal surface is observed at laser fluence below the plasma formation threshold. The laser radiation energy dependences of the yield of positive and negative Au ions and charged clusters as well as electrons from the laser-induced nanostructures on the surface of gold are obtained at laser fluence below the plasma formation threshold using a pulsed laser with a wavelength of 355 nm and a pulse duration of 0.37 ns. It is shown that the ratio of the signals of positive and negative ions is constant over the entire range of the laser radiation energies, while the ion signal dependence on the laser radiation energy is described by a power function with an exponent of 9. The role of gold nanoparticles with a size of less than 5 nm in the formation of Au ions and charged Au clusters is discussed.
| S-EPMC9919040 | biostudies-literature
Project description:We investigated the biofilm removal effects of laser activated irrigation (LAI) using a pig model, focusing on the impact of the fiber tip position, and used a high-speed camera to observe the occurrence and positioning of the cavitation associated with laser irradiation. A total of 16 roots of deciduous mandibular second premolars from 4 pigs were used. After a pulpectomy, the canals were left open for 2 weeks and sealed for 4 weeks to induce intraradicular biofilm. Root canal irrigation was then performed with Er:YAG laser activation. The fiber tip was inserted at two different positions, i.e., into the root canal in the intracanal LAI group and into the pulp chamber in the coronal LAI group. Intracanal needle irrigation with saline or 5% NaOCl was utilized in the positive control and conventional needle irrigation (CNI) groups. SEM and qPCR were carried out to evaluate treatment efficacy. Statistical analysis was performed using ANOVA and a Tukey-Kramer post-hoc test for qPCR and with a Steel-Dwass test to compare the SEM scores, with α = 0.05. A high-speed camera was used to observe the generation of cavitation bubbles and the movement of the induced bubbles after laser irradiation. The intracanal and coronal LAI groups showed significantly lower amounts of bacteria than either the positive control or CNI groups. There was no significant difference found between the intracanal and coronal LAI groups. SEM images revealed opened dentinal tubules with the destruction of biofilm in both LAI groups. High-speed camera images demonstrated cavitation bubble production inside the root canal after a single pulse irradiation pulse. The generated bubbles moved throughout the entire internal multi-rooted tooth space. Coronal LAI can generate cavitation in the root canal with a simply placed fiber inside the pulp chamber, leading to effective biofilm removal. This method could thus contribute to the future development of endodontic treatments for refractory apical periodontitis caused by intraradicular biofilm.
| S-EPMC8940933 | biostudies-literature
Project description:Introduction: A variety of laser treatments have been applied in numerous medical fields. In dentistry, laser treatments are used for caries, root canals, and periodontal disease, as well as surgical resection. Numerous reports have recently been published on the use of lasers for bone regeneration. If laser irradiation is found to promote the activation of bone metabolism, it might also be effective for periodontal treatment, peri-implantitis, and bone regeneration. Therefore, the present in vitro study aimed to elucidate the mechanisms underlying the effects of erbium-doped yttrium aluminum garnet (Er: YAG) laser irradiation on the bone using osteoblast-like cells. Methods: Osteoblast-like Saos 2 cells (5.0×104 cells) were seeded in 24-well plates. 24 hours after being seeded, the cells were subjected to 0.3 W, 0.6 W, and 2.0 W Er: YAG laser irradiation and then allowed to recover for 48 hours. The expression levels of bone metabolism-related factors alkaline phosphatase (ALP), bone sialoprotein (BSP), and osteoprotegerin (OPG) were then evaluated using reverse transcription-quantitative polymerase chain reaction and western blot analyses. Results: Saos 2 cells subjected to Er: YAG laser irradiation at 0.3 W, 0.6 W, and 2.0 W showed normal growth. When the Er: YAG laser irradiation and control groups were compared after 48 hours, increases were observed in ALP, BSP, and OPG gene and protein expression in the 2.0 W group. Similar results were obtained in the western blot analysis. Conclusion: These findings suggest that the Er: YAG laser irradiation of osteoblast-like cells is effective for activating bone metabolism factors.
| S-EPMC10423954 | biostudies-literature
Project description:BACKGROUND:Enamel demineralisation is an initial step of the serious dental problem including dental caries, white spot lesions and dental erosion. AIM:Compare the effect of Er, Cr: YSGG (? = 2780 nm) and nanosecond Nd: YAG (? = 1064 nm) laser on enamel acid resistance. MATERIAL AND METHODS:Thirty non-carious human premolars, extracted for orthodontic reasons, were used. The experimental groups (n = 10 each group) were: Group I, untreated (control); Group II, Er, Cr: YSGG laser irradiation (0.75 W, 20 Hz, 140 ?s, 10 s); Group III, nanosecond pulsed Nd: YAG laser irradiation (0.8 W, 10 Hz, 7 ns, 10 s). Scanning electron microscope and Energy Dispersive X-ray Spectroscopy (EDX) were used to assess acquired enamel resistance to PH cycling. RESULTS:After subjecting the three experimental groups to PH cycling, scanning electron microscopic examination revealed irregular porous dissoluted enamel surface in group I. However, groups II and III demonstrated partially dissoluted enamel surface. EDX analysis demonstrated the lowest mean percentage decrease in calcium and phosphorus content in group II followed by group III, then the highest mean percentage decrease was observed in untreated group I. One-way ANOVA revealed significant differences (p < 0.0001) between the tested groups. CONCLUSIONS:Both Er, Cr: YSSG and nanosecond Nd: YAG laser irradiation were able to improve the acid resistance of enamel. However, enamel surface treated with Er, Cr: YSSG laser showed the lowest mean percentage decrease of calcium and phosphorus (highest acid resistance).
| S-EPMC6614279 | biostudies-literature