Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Natural Rubber-TiO₂ Nanocomposite Film for Triboelectric Nanogenerator Application.

ABSTRACT: In this research, natural rubber (NR)-TiO₂ nanocomposites were developed for triboelectric nanogenerator (TENG) application to harvest mechanical energy into electrical energy. Rutile TiO₂ nanoparticles were used as fillers in NR material to improve dielectric properties so as to enhance the energy conversion performance of the NR composite TENG. The effect of filler concentration on TENG performance of the NR-TiO₂ composites was investigated. In addition, ball-milling method was employed to reduce the agglomeration of TiO₂ nanoparticles in order to improve their dispersion in the NR film. It was found that the TENG performance was significantly enhanced due to the increased dielectric constant of the NR-TiO₂ composite films fabricated from the ball-milled TiO₂. The TENG, fabricated from the NR-TiO₂ composite using 24 h ball-milled TiO₂ at 0.5%wt, delivered the highest power density of 237 mW/m², which was almost four times higher than that of pristine NR TENG. Furthermore, the applications of the fabricated NR-TiO₂ TENG as a power source to operate portable electronics devices were also demonstrated.

SUBMITTER: Bunriw W

PROVIDER: S-EPMC8271377 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Polymer nanocomposite-enabled high-performance triboelectric nanogenerator with self-healing capability.

Project description:Triboelectric nanogenerators (TENG) have been proven to be effective for the collection of low-frequency vibrational energy in the environment. However, most polymer materials as friction layers are highly susceptible to mechanical damage during operation, which reduces the performance and lifetime of TENG. Herein, we report a high-performance, flexible triboelectric nanogenerator with reproducible self-healing electronic characteristics. Based on its soft and flexible polymers, the self-healing triboelectric nanogenerator (SH-TENG) can achieve a peak power of 2.5 W m-2 and triboelectric charge density of about 100 μC m-2. High-conductance Ag nanowires (AgNWs) are semi-embedded in the polymer to fabricate all-in-one friction layers and for an enhanced self-healing process. Both the output voltage and current of the healed device can reach up to about 99% of their original values even after five cutting/healing cycles. The fabricated SH-TENG has excellent stability and flexibility, which presents a significant step towards the fabrication of reliable triboelectric nanogenerators with recoverability and low maintenance costs.

| S-EPMC9085514 | biostudies-literature

Omni-directional wind-driven triboelectric nanogenerator with cross-shaped dielectric film.

Project description:Triboelectric nanogenerators (TENGs) are actively being researched and developed to become a new external power unit for various electronics and applications. Wind is proposed as a mechanical energy source to flutter the dielectric film in wind-driven TENGs as it is clean, abundant, ubiquitous, and sustainable. Herein, we propose a TENG structure with dielectric films bent in four directions to collect the wind energy supply from all directions, unlike the conventional wind-driven TENGs which can only harvest the wind energy from one direction. Aluminum (Al) layer was intercalated within the dielectric film to improve electrostatic induction, resulting in improved triboelectric performances. Maximum open-circuit voltage (Voc) of 233 V, short-circuit current (Isc) of 348 µA, and output power density of 46.1 W m- 2 at an external load of 1 MΩ under a wind speed of 9 m s- 1 were revealed, and it faithfully lit "LED" characters composed of 25 LEDs.

| S-EPMC8413407 | biostudies-literature

Alternate-Layered MXene Composite Film-Based Triboelectric Nanogenerator with Enhanced Electrical Performance.

Project description:The output power of the triboelectric nanogenerator (TENG) strongly depends on the performance of triboelectric materials, especially microstructures and functional groups of them. In this work, aiming at the excellent triboelectric ability, alternate-layered MXene composite films-based TENG with abundant fluorine groups(-F) through layer-by-layer stacking are designed and fabricated. Benefitting from the uniform intrinsic microstructure and increased dielectric constant, when the amount of the Nb2CTx nanosheets increases to 15 wt%, the TENG based on Nb2CTx/Ti3C2Tx composite nanosheets films achieves the maximum output. The short-circuit current density of 8.06 μA/cm2 and voltage of 34.63 V are 8.4 times and 3.5 times over that of pure Ti3C2Tx films, and 3.3 times and 4.3 times over that of commercial poly(tetrafluoroethylene) (PTFE) films, respectively. Furthermore, the fabricated TENG could be attached to human body to harvest energy from human motions, such as typing, texting, and hand clapping. The results demonstrate that the alternate-layered MXene composite nanosheet films through layer-by-layer stacking possess remarkably triboelectric performance, which broaden the choice of negative triboelectric materials and supply a new choice for high output TENG.

| S-EPMC8110669 | biostudies-literature

Integrated charge excitation triboelectric nanogenerator.

Project description:Performance of triboelectric nanogenerators is limited by low and unstable charge density on tribo-layers. An external-charge pumping method was recently developed and presents a promising and efficient strategy towards high-output triboelectric nanogenerators. However, integratibility and charge accumulation efficiency of the system is rather low. Inspired by the historical development of electromagnetic generators, here, we propose and realize a self-charge excitation triboelectric nanogenerator system towards high and stable output in analogy to the principle of traditional magnetic excitation generators. By rational design of the voltage-multiplying circuits, the completed external and self-charge excitation modes with stable and tailorable output over 1.25 mC m-2 in contact-separation mode have been realized in ambient condition. The realization of the charge excitation system in this work may provide a promising strategy for achieving high-output triboelectric nanogenerators towards practical applications.

| S-EPMC6440990 | biostudies-literature

A Robust Silicone Rubber Strip-Based Triboelectric Nanogenerator for Vibration Energy Harvesting and Multi-Functional Self-Powered Sensing.

Project description:Vibration is a common phenomenon in various fields which can not only indicate the working condition of the installation, but also serve as an energy source if it is efficiently harvested. In this work, a robust silicone rubber strip-based triboelectric nanogenerator (SRS-TENG) for vibration energy harvesting and multi-functional self-powered sensing is proposed and systematically investigated. The SRS-TENG consists of a silicone rubber strip and two aluminum electrode layers supported by polylactic acid (PLA), and acts as a sustainable power source and vibration frequency, amplitude and acceleration sensor as well. The soft contact between the aluminum electrode and silicone rubber strip makes it robust and stable even after 14 days. It can be applied in ranges of vibration frequencies from 5 to 90 Hz, and amplitudes from 0.5 to 9 mm, which shows it has advantages in broadband vibration. Additionally, it can achieve lower startup limits due to its soft structure and being able to work in multi-mode. The output power density of the SRS-TENG can reach 94.95 W/m3, matching a resistance of 250 MΩ, and it can light up more than 100 LEDs and power a commercial temperature sensor after charging capacitors. In addition, the vibration amplitude can be successfully detected and displayed on a human-machine interface. Moreover, the frequency beyond a specific limit can be distinguished by the SRS-TENG as well. Therefore, the SRS-TENG can be utilized as an in situ power source for distributed sensor nodes and a multifunctional self-powered vibration sensor in many scenarios.

| S-EPMC9030836 | biostudies-literature

A Flexible Triboelectric Nanogenerator Based on Multilayer MXene/Cellulose Nanofibril Composite Film for Patterned Electroluminescence Display.

Project description:The flexible self-powered display system integrating a flexible triboelectric nanogenerator (TENG) and flexible alternating current electroluminescence (ACEL) has attracted increasing attention for its promising potential in human-machine interaction applications. In this work, a performance-enhanced MXene/cellulose nanofibril (CNF)/MXene-based TENG (MCM-TENG) is reported for powering a flexible patterned ACEL device in order to realize self-powered display. The MCM multilayer composite film was self-assembled through the layer-by-layer method. The MCM film concurrently acted as a triboelectric layer and electrode layer due to its high conductivity and strength. Moreover, the effect of CNF concentration and number of layers on the output performance of TENG was investigated. It was found that the MCM-TENG realized the optimum output performance. Finally, a flexible self-powered display device was realized by integrating the flexible TENG and ACEL. The MCM-TENG with an output voltage of ≈90 V at a frequency of 2 Hz was found to be efficient enough to power the ACEL device. Therefore, the as-fabricated flexible TENG demonstrates a promising potential in terms of self-powered displays and human-machine interaction.

| S-EPMC9571373 | biostudies-literature

Selection rules of triboelectric materials for direct-current triboelectric nanogenerator.

Project description:The rapid development of Internet of Things and artificial intelligence brings increasing attention on the harvesting of distributed energy by using triboelectric nanogenerator (TENG), especially the direct current TENG (DC-TENG). It is essential to select appropriate triboelectric materials for obtaining a high performance TENG. In this work, we provide a set of rules for selecting the triboelectric materials for DC-TENG based on several basic parameters, including surface charge density, friction coefficient, polarization, utilization rate of charges, and stability. On the basis of the selection rules, polyvinyl chloride, used widely in industry rather than in TENG, is selected as the triboelectric layer. Its effective charge density can reach up to ~8.80 mC m-2 in a microstructure-designed DC-TENG, which is a new record for all kinds of TENGs. This work can offer a basic guideline for the triboelectric materials selection and promote the practical applications of DC-TENG.

| S-EPMC8333059 | biostudies-literature

Cytotoxicity of Formulated Graphene and Its Natural Rubber Nanocomposite Thin Film in Human Vaginal Epithelial Cells: An Influence of Noncovalent Interaction.

Project description:Graphene family materials (GFMs) are extensively explored for various biomedical applications due to their unique physical properties. The prime challenge is to establish a conclusive safety profile of these nanomaterials and their respective products or devices. Formulating GFMs with appropriate ingredients (e.g., surfactant/compatibilizer) will help to disperse them homogeneously (i.e., within the polymer matrix in the case of polymer-graphene nanocomposites) and aid in good interfacial interaction to achieve the desired properties. However, no cytotoxicity report is available on the effects of the additives on graphene and its incorporated materials. Here, we report in vitro cytotoxicity of formulated FLG (FLG-C), i.e., a mixture of FLG, melamine, and sodium poly(naphthalene sulfonate) (SPS), along with natural rubber (NR) latex and FLG-C-included NR latex nanocomposite (FLG-C-NR) thin films on human vaginal epithelial (HVE) cells. FLG-C shows reduced cellular proliferation (∼55%) only at a longer exposure time (72 h) even at a low concentration (50 μg/mL). It also displays significant down- and upregulation in mitochondrial membrane potential (MMP) and reactive oxygen species (ROS), respectively, whereas no changes are observed in lactate dehydrogenase (LDH), propidium iodide (PI), uptake, and cell cycle analysis at 48 h. In vitro experiments on NR latex and FLG-C-NR latex thin films demonstrate that the incorporation of FLG-C does not compromise the biocompatibility of the NR latex. Further substantiation from the in vivo experiments on the thin films recommends that FLG-C could be suitable to prepare a range of biocompatible rubber latex nanocomposites-based products, viz., next-generation condoms (male and female), surgical gloves, catheters, vaginal rings, bladder-rectum spacer balloon, etc.

| S-EPMC7157971 | biostudies-literature

All printable snow-based triboelectric nanogenerator.

Project description:The development of power generators that can function in harsh snowy environments and in contact with snow can be beneficial but challenging to accomplish. Herein, we introduce the first snow-based triboelectric nanogenerator (snow-TENG) that can be used as an energy harvester and a multifunctional sensor based on the principle of snow-triboelectrification. In this work, we used a 3D printing technique for the precise design and deposition of the electrode and triboelectric layer, leading to flexible, stretchable and metal-free triboelectric generators. Based on the single electrode mode, the device can generate an instantaneous output power density as high as 0.2 mW/m2, an open circuit voltage up to 8 V, and a current density of 40 μA/m2. In addition, the snow-TENG can function as a miniaturized weather station to monitor the weather in real time to provide accurate information about the snowfall rate, snow accumulation depth, wind direction, and speed in snowy and/or icy environments. In addition, the snow-TENG can be used as a wearable power source and biomechanical sensor to detect human body motions, which may prove useful for snow-related sports. Unlike conventional sensor platforms, our design works without the need for batteries or image processing systems. We envision these devices could potentially be integrated into solar panels to ensure continuous power supply during snowy weather conditions.

| S-EPMC7497792 | biostudies-literature

Cellulose II Aerogel-Based Triboelectric Nanogenerator.

Project description:Cellulose-based triboelectric nanogenerators (TENGs) have gained increasing attention. In this study, a novel method is demonstrated to synthesize cellulose-based aerogels and such aerogels are used to fabricate TENGs that can serve as mechanical energy harvesters and self-powered sensors. The cellulose II aerogel is fabricated via a dissolution-regeneration process in a green inorganic molten salt hydrate solvent (lithium bromide trihydrate), where. The as-fabricated cellulose II aerogel exhibits an interconnected open-pore 3D network structure, higher degree of flexibility, high porosity, and a high surface area of 221.3 m2 g-1. Given its architectural merits, the cellulose II aerogel-based TENG presents an excellent mechanical response sensitivity and high electrical output performance. By blending with other natural polysaccharides, i.e., chitosan and alginic acid, electron-donating and electron-withdrawing groups are introduced into the composite cellulose II aerogels, which significantly improves the triboelectric performance of the TENG. The cellulose II aerogel-based TENG is demonstrated to light up light-emitting diodes, charge commercial capacitors, power a calculator, and monitor human motions. This study demonstrates the facile fabrication of cellulose II aerogel and its application in TENG, which leads to a high-performance and eco-friendly energy harvesting and self-powered system.

| S-EPMC7357570 | biostudies-literature