Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Recycling of Wastes Plastics and Tires from Automotive Industry.

ABSTRACT: Waste tires (granulate) and selected plastics from the automotive industry were evaluated by using the tertiary (pyrolysis) and quaternary (calorimetry) recovering. Pyrolysis is proving to be an environmentally friendly alternative to incineration and inefficient landfilling. Currently, the main challenges for pyrolysis of plastic waste are unavailability and inconsistent quality of feedstock, inefficient and hence costly sorting, and last but not least insufficient regulations around plastic waste management. Waste plastics and tire materials were characterized by TG/DTG analysis, Py-GC/MS analysis and calorimetry. TG analysis of the investigated materials gives the typical decomposition curves of synthetic polymers. The tested samples had the highest rate of weight loss process in the temperature range from 375 °C to 480 °C. Analytical pyrolysis of the tested polymers provided information on a wide variety of organic compounds that were released upon thermal loading of these materials without access to oxygen. Analytical pyrolysis offers valuable information on the spectrum of degradation products and their potential uses. Based on the results of calorimetry, it can be stated that the determined calorific value of selected plastic and rubber materials was ranging from 26.261 to 45.245 MJ/kg depending on the ash content and its composition.

SUBMITTER: Cabalova I

PROVIDER: S-EPMC8271936 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Recycling of Plastics from Cable Waste from Automotive Industry in Poland as an Approach to the Circular Economy.

Project description:This paper presents the contemporary problems of polymer waste recycling, mainly recycling cables from end-of-life vehicles. The authors developed a new material based on mixed polymer waste (ASR) modified with a ductile polymer, mainly recycled low-density polyethylene (rLDPE), to produce moisture-resistant boards with beneficial mechanical properties. The ASR-based compositions without and with homogenization process-including physical, chemical, and shear-assisted compatibilization-were successfully applied and verified by evaluating final recycled product properties. The results showed that recycled polyethylene (rLDPE) was effective as a modifier increasing tensile modulus and flexural strength compare to an ASR mixture. It was found that the adding 5 wt % of polyethylene-grafted maleic anhydride (PE-g-MAH) as a compatibilizer to the ASR mixture significantly increases the homogenization of the components in the ASR matrix. The optimal solution for management cable waste is the manufacture of ASR composites with homogenization using an internal mixer the adding 20 wt % of rLDPE and 5 wt % of PE-g-MAH to the mixed plastics cable waste. The results obtained demonstrate that the hot-pressing with the pre-blending with rLDPE and compatibilizer of the ASR based waste provides a high gain in mechanical and usage properties, enabling the circular economy of plastics from automotive cables.

| S-EPMC8588454 | biostudies-literature

Challenges and Alternatives to Plastics Recycling in the Automotive Sector.

Project description:Plastics are increasingly a preferred material choice in designing and developing complex, consumer products, such as automobiles, because they are mouldable, lightweight, and are often perceived to be highly recyclable materials. However, actually recycling the heterogeneous plastics used in such durable items is challenging, and presents very different scenarios to how simple products, such as water bottles, are recovered via curbside or container recycling initiatives. While the technology exists to recycle plastics, their feasibility to do so from high level consumer or industrial applications is bounded by technological and economical restraints. Obstacles include the lack of market for recyclates, and the lack of cost efficient recovery infrastructures or processes. Furthermore, there is a knowledge gap between manufacturers, consumers, and end-of-life facility operators. For these reasons, end-of-life plastics are more likely to end up down-cycled, or as shredder residue and then landfilled. This paper reviews these challenges and several alternatives to recycling plastics in order to broaden the mindset surrounding plastics recycling to improve their sustainability. The paper focuses on the automotive sector for examples, but discussion can be applied to a wide range of plastic components from similarly complex products.

| S-EPMC5456202 | biostudies-other

Impact of digital transformation on the automotive industry.

Project description:Digital technologies are transforming the automotive industry and disrupting traditional business models. New business opportunities related to Industry 4.0 are emerging, so companies must adapt to the new environment. The study presents an application of fuzzy-set qualitative comparative analysis (fsQCA) to analyze the future impact of digital transformation on business performance models and the different actors' satisfaction. A wide range of aspects and actors derived from the digital transformation process in the automotive industry are considered. The study covers connected and autonomous driving, mobility as a service, digital information sources in car purchasing, big data, etc. The disruptive effect of the gradual introduction of electric vehicles into the market is also considered, which is boosted by environmental policies on climate change and directives for the potential use of renewable energy sources to power electric vehicles. On the other hand, the study analyses the impacts of digital transformation on the automotive industry from the point of view of different actors, ranging from automobile manufacturers, service providers, public transportation providers, and consumers to governments. The methodology has been successfully applied to a complex case study-based empirical analysis. It presents a novel application of fsQCA to digital transformation in the automotive industry in Spain. The conclusions show that it is necessary to invest in adequate measures for adaptation to digital transformation, and manufacturers will end up having greater profits, productivity, and competitiveness. From the point of view of consumers, there will be access to more and better services and greater satisfaction with the required services.

| S-EPMC7543716 | biostudies-literature

Decorative Chromium Coatings on Polycarbonate Substrate for the Automotive Industry.

Project description:Metal-coated plastic parts are replacing traditional metallic materials in the automotive industry. Sputtering is an alternative technology that is more environmentally friendly than electrolytic coatings. Most metalized plastic parts are coated with a thin metal layer (~100-200 nm). In this work, the challenge is to achieve thicker films without cracking or without other defects, such as pinholes or pores. Chromium coatings with different thicknesses were deposited onto two different substrates, polycarbonate with and without a base coat, using dc magnetron sputtering in an atmosphere of Ar. Firstly, in order to improve the coating adhesion on the polymer surface, a plasma etching treatment was applied. The coatings were characterized for a wide thickness range from 800 nm to 1600 nm. As the thickness of the coatings increased, there was an increase in the specular reflectivity and roughness of the coatings and changes in morphology due to the columnar growth of the film and a progressive increase in thermal stresses. Furthermore, a decrease in the hardness and the number of pinholes was noticed. The maximum thickness achieved without forming buckling defects was 1400 nm. The tape tests confirmed that every deposited coating showed a good interface adhesion to both polymers.

| S-EPMC10051204 | biostudies-literature

Degradation of Styrenic Plastics during Recycling: Accommodation of PP within ABS after WEEE Plastics Imperfect Sorting.

Project description:With the development of dark polymers for industrial sorting technologies, economically profitable recycling of plastics from Waste Electrical and Electronical Equipment (WEEE) can be envisaged even in the presence of residual impurities. In ABS extracted from WEEE, PP is expected to be the more detrimental because of its important lack of compatibility. Hence, PP was incorporated to ABS at different rates (2 to 8 wt%) with a twin-screw extruder. PP was shown to exhibit a nodular morphology with an average diameter around 1-2 µm. Tensile properties were importantly diminished beyond 4 wt% but impact resistance was decreased even at 2 wt%. Both properties were strongly reduced as function of the contamination rate. Various potential compatibilizers for the ABS + 4 wt% PP system were evaluated: PPH-g-MA, PPC-g-MA, ABS-g-MA, TPE-g-MA, SEBS and PP-g-SAN. SEBS was found the most promising, leading to diminution of nodule sizes and also acting as an impact modifier. Finally, a Design Of Experiments using the Response Surface Methodology (DOE-RSM) was applied to visualize the impacts and interactions of extrusion temperature and screw speed on impact resistance of compatibilized and uncompatibilized ABS + 4 wt% PP systems. Resilience improvements were obtained for the uncompatibilized system and interactions between extrusion parameters and compatibilizers were noticed.

| S-EPMC8124459 | biostudies-literature

Additive manufacturing process selection for automotive industry using Pythagorean fuzzy CRITIC EDAS.

Project description:For many different types of businesses, additive manufacturing has great potential for new product and process development in many different types of businesses including automotive industry. On the other hand, there are a variety of additive manufacturing alternatives available today, each with its own unique characteristics, and selecting the most suitable one has become a necessity for relevant bodies. The evaluation of additive manufacturing alternatives can be viewed as an uncertain multi-criteria decision-making (MCDM) problem due to the potential number of criteria and candidates as well as the inherent subjectivity of various decision-experts engaging in the process. Pythagorean fuzzy sets are an extension of intuitionistic fuzzy sets that are effective in handling ambiguity and uncertainty in decision-making. This study offers an integrated fuzzy MCDM approach based on Pythagorean fuzzy sets for assessing additive manufacturing alternatives for the automotive industry. Objective significance levels of criteria are determined using the Criteria Importance Through Inter-criteria Correlation (CRITIC) technique, and additive manufacturing alternatives are prioritized using the Evaluation based on Distance from Average Solution (EDAS) method. A sensitivity analysis is performed to examine the variations against varying criterion and decision-maker weights. Moreover, a comparative analysis is conducted to validate the acquired findings.

| S-EPMC9997986 | biostudies-literature

Toward Microbial Recycling and Upcycling of Plastics: Prospects and Challenges.

Project description:Annually, 400 Mt of plastics are produced of which roughly 40% is discarded within a year. Current plastic waste management approaches focus on applying physical, thermal, and chemical treatments of plastic polymers. However, these methods have severe limitations leading to the loss of valuable materials and resources. Another major drawback is the rapid accumulation of plastics into the environment causing one of the biggest environmental threats of the twenty-first century. Therefore, to complement current plastic management approaches novel routes toward plastic degradation and upcycling need to be developed. Enzymatic degradation and conversion of plastics present a promising approach toward sustainable recycling of plastics and plastics building blocks. However, the quest for novel enzymes that efficiently operate in cost-effective, large-scale plastics degradation poses many challenges. To date, a wide range of experimental set-ups has been reported, in many cases lacking a detailed investigation of microbial species exhibiting plastics degrading properties as well as of their corresponding plastics degrading enzymes. The apparent lack of consistent approaches compromises the necessary discovery of a wide range of novel enzymes. In this review, we discuss prospects and possibilities for efficient enzymatic degradation, recycling, and upcycling of plastics, in correlation with their wide diversity and broad utilization. Current methods for the identification and optimization of plastics degrading enzymes are compared and discussed. We present a framework for a standardized workflow, allowing transparent discovery and optimization of novel enzymes for efficient and sustainable plastics degradation in the future.

| S-EPMC8985596 | biostudies-literature

Chemical Recycling of Plastics by Microwave-Assisted High-Temperature Pyrolysis.

Project description:Use of plastics faces much criticism because of its shocking and increasing impact on the environment. But banning plastic will not help the environment. Only appropriate recycling of plastic waste can give satisfying solution. A lab-scale chemical recycling method, in which a mixture of plastic wastes and plant oil is continuously cracked into ethylene, propylene, and other useful chemicals by using microwave-assisted high-temperature pyrolysis, is developed. The method has delivered interesting leads that provide the basis for setting up a new process. Based on the encouraging results, a "drop-in" method for a renewable and circular polymer industry is also proposed. If it is commercially realized, plastic waste and plant oils will be the feedstock for the polymer industry and this industry will become renewable and circular.

| S-EPMC7117841 | biostudies-literature

Recovery and Characterization Studies of Post-Production Alloy Waste from the Automotive Industry.

Project description:Superalloys provide high corrosion resistance and are widely used as high-performance materials in aerospace, automotive, chemical, and other industries. Herein, the investigation into the characteristics and properties of alloy waste; Inconel 625, Inconel 718, and Titanium Grade 5, from the automotive industry, was introduced as a result of a recovery in various processes. For this reason, the following procedures were carried as follows; the washing process to remove oil from the swarf was evaluated using several commercial agents and for the process of thermal disposal of processing fluids, a temperature of 900 °C was used in a muffle furnace without air access. The presented studies show that the commercially available series of washing agents did not modify the composition of the surface. However, the high temperatures during the calcination of oil residues are affecting the elemental composition of the alloys. According to the results of the analyses, it is not possible to remove 100% of the oil residues from alloy waste using washing agents based on light organic fractions; however, the effectiveness of this method reaches 99%. In this report, accurate SEM-EDS analyses show changes that occur on the surface after machining and removal of processing fluids. The NMR and GC/MS investigations indicate contaminants as a mixture of aliphatic and cycloaliphatic hydrocarbons with carbon numbers from C8-C30.

| S-EPMC7763364 | biostudies-literature

Recycling of diaper wastes for a triboelectric nanogenerator-based weather station.

Project description:Escalating concerns over waste management and the need for sustainable energy have prompted innovative solutions at the nexus of resource recycling and self-powered applications. This study presents a novel approach to recycling super-absorbing polymer (SAP) gels from waste diapers and discarded baking sheets to fabricate a diaper waste-based triboelectric nanogenerator (DW-TENG). The DW-TENG, resembling a maraca, demonstrated superior electrical performance with a voltage output of 110 V, a current of 9 μA, and a power of 259.15 μW. It was successfully integrated into a self-powered weather station for real-time monitoring of wind speed, humidity, and temperature. This research underscores the dual benefits of waste management and energy generation, representing a promising step toward a circular and sustainable future.

| S-EPMC11369379 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data