Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Porous Fluorocarbon from Rice Husk for the Efficient Separation of Gases.

ABSTRACT: A porous fluorocarbon sorbent is synthesized from rice husk (RH) in a microwave reactor and then evaluated for the adsorption of different gases (CH₄, CO₂, and N₂). The fluorocarbon is characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), Raman spectroscopy, Thermal gravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). Significant enhancement in the surface area of activated carbon material is obtained from 29 to 531 m² g^-1 after removing naturally present silica in RH. Results reveal that rice husk fluorocarbon (RHF) has a higher adsorption affinity for CO₂ (1.8 mmol g^-1) than that of the sulfonated rice husk (RHS) (1.4 mmol g^-1) at 298 K while the corresponding separation factor of CO₂/CH₄ is 4 and 3; respectively. Higher separation factors of 12 and 10 are observed for the binary system of CO₂/N₂, respectively. Quantum chemical density functional theory (DFT) calculations agree with the experimental observations. They reveal that RHF exhibits strong columbic interactions with considerable interaction energies of -87.85, -76.75, and -55.65 kcal mol^-1 with CO₂, CH₄, and N₂ gases; respectively. Finally, the adsorption process results are highly reproducible, with a small decrease in the adsorption capacity of less than 5% after repeated trials.

SUBMITTER: Bakdash RS

PROVIDER: S-EPMC8272015 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Rice husk derived Aminated Silica for the efficient adsorption of different gases.

Project description:In this present work, we successfully prepared aminated silica (ASiO2) from rice husk ash (RHA) and functionalized with 3-aminopropyltriethoxysilane (APTES). Physical and chemical properties of the synthesized material were investigated by various techniques SEM-EDX, XPS, FTIR, TGA. The surface area of RHA was 223 m2/g, while for ASiO2 was 101 m2/g. Molecular level DFT calculations revealed that the functionalization of ASiO2 resulted in a significant decrease in the HOMO-LUMO energy gap, a reduction in hardness, and a consequent increase in charge transfer characteristics. The adsorption behavior at low pressure (1 atm.) of aminated silica on different gases CO2, CH4, H2, and N2 at temperatures 77, 273, 298 K was studied. The adsorption of hydrogen was reported for the first time on aminated silica with an excellent adsorption capacity of 1.2 mmol/g. The ASiO2 exhibited excellent performance in terms of gas separation in binary mixtures of CO2/CH4, CO2/N2 and CO2/H2 at 273, and 298 K, respectively. The catalyst further exhibits high stability during three cycles with less than 10% variation in the separation capacity.

| S-EPMC7658350 | biostudies-literature

Rice Husk-Derived Cellulose Nanofibers: A Potential Sensor for Water-Soluble Gases.

Project description:Cellulose and its derivatives have evoked much attention in sensor technology as host-matrices for conducting materials because of their versatility, renewability, and biocompatibility. However, only a few studies have dealt with the potential utilization of cellulose as a sensing material without a composite structure. In this study, cellulose nanofibers (CNF) and 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibers (TOCNF) extracted from rice husks by using ultrasonic-assisted methods are introduced as a potential gas sensing material with highly sensitive performance. To fabricate nanocellulose-based films, CNF, TOCNF, and TOCNF with glycerol (TOCNF/G) were dispersed in water and applied on polyimide substrate with digital electrodes to form self-standing thin films by a drop-casting method. A transparent coating layer on the surface of the plate after drying is used for the detection of water-soluble gases such as acetone, ammonia, methane, and hydrogen sulfide gases at room temperature at 52% relative humidity. The sensor prototypes exhibited high sensitivity, and the detection limit was between 1 ppm and 5 ppm, with less than 10 min response and recovery time. The results indicate that both the CNF- and the TOCNF-coated sensors show good sensitivity toward ammonia and acetone, compared to other gases. A TOCNF/G-coated sensor exhibited minimum time in regard to response/recovery time, compared to a CNF-coated sensor. In this study, nanocellulose-based sensors were successfully fabricated using a low-cost process and a bio-based platform. They showed good sensitivity for the detection of various gases under ambient conditions. Therefore, our study results should further propel in-depth research regarding various applications of cellulose-based sensors in the future.

| S-EPMC8271963 | biostudies-literature

Environmentally-Friendly Dense and Porous Geopolymers Using Fly Ash and Rice Husk Ash as Raw Materials.

Project description:This paper assesses the feasibility of two industrial wastes, fly ash (FA) and rice husk ash (RHA), as raw materials for the production of geopolymeric pastes. Three typologies of samples were thus produced: (i) halloysite activated with potassium hydroxide and nanosilica, used as the reference sample (HL-S); (ii) halloysite activated with rice husk ash dissolved into KOH solution (HL-R); (iii) FA activated with the alkaline solution realized with the rice husk ash (FA-R). Dense and porous samples were produced and characterized in terms of mechanical properties and environmental impact. The flexural and compressive strength of HL-R reached about 9 and 43 MPa, respectively. On the contrary, the compressive strength of FA-R is significantly lower than the HL-R one, in spite of a comparable flexural strength being reached. However, when porous samples are concerned, FA-R shows comparable or even higher strength than HL-R. Thus, the current results show that RHA is a valuable alternative to silica nanopowder to prepare the activator solution, to be used either with calcined clay and fly ash feedstock materials. Finally, a preliminary evaluation of the global warming potential (GWP) was performed for the three investigated formulations. With the mix containing FA and RHA-based silica solution, a reduction of about 90% of GWP was achieved with respect to the values obtained for the reference formulation.

| S-EPMC5456825 | biostudies-other

Baseline characterization data for raw rice husk.

Project description:There is a significant interest in using agricultural wastes such as rice husk as a precursor for the synthesis of adsorbents and catalysts. In this article, readers will find valuable baseline characterization data related to physical and chemical properties of raw rice husk including BET specific surface area, acid value, the point of zero charge, elemental analysis, Time-of-Flight Secondary Ion Mass Spectrometric Analysis X-Ray Photoelectron Spectroscopic Analysis, and Scanning Electron Microscope-Energy Dispersive Spectroscopic Analysis. It is expected that the baseline raw data presented in this article will be useful for researchers around the world who are working on chemically modifying rice husk for valorizing them for applications in adsorption, catalysis, and energy storage.

| S-EPMC6690668 | biostudies-other

Fabrication of Superhydrophobic Porous Brass by Chemical Dealloying for Efficient Emulsion Separation.

Project description:By taking advantage of typical dealloying and subsequent aging methods, a novel homogeneous porous brass with a micro/nano hierarchical structure was prepared without any chemical modification. The treatment of commercial brass with hot concentrated HCl solution caused preferential etching of Zn from Cu62Zn38 alloy foil, leaving a microporous skeleton with an average tortuous channel size of 1.6 μm for liquid transfer. After storage in the atmosphere for 7 days, the wettability of the dealloyed brass changed from superhydrophilic to superhydrophobic with a contact angle > 156° and sliding angle < 7°. The aging treatment enhanced the hydrophobicity of the brass by the formation of Cu2O on the surface. By virtue of the opposite wettability to water and oil, the aged brass separated surfactant-stabilized water-in-oil emulsions with separation efficiency of over 99.4% and permeate flux of about 851 L·m-2·h-1 even after recycling for 60 times. After 10 times of tape peeling or sandpaper abrasion, the aged brass maintained its superhydrophobicity, indicating its excellent mechanical stability. Moreover, the aged brass still retained its superhydrophobicity after exposure to high temperatures or corrosive solutions, displaying high resistance to extreme environments. The reason may be that the bicontinuous porous structure throughout the whole foil endows stable mechanical properties to tolerate extreme environments. This method should have a promising future in expanding the applications of alloys.

| S-EPMC10534338 | biostudies-literature

Toward Efficient Synthesis of Porous All-Carbon-Based Nanocomposites for Enantiospecific Separation.

Project description:Chiral separation and asymmetric synthesis and catalysis are crucial processes for obtaining enantiopure compounds, which are especially important in the pharmaceutical industry. The efficiency of the separation processes is readily increased by using porous materials as the active material can interact with a larger surface area. Silica, metal-organic frameworks, or chiral polymers are versatile porous materials that are established in chiral applications, but their instability under certain conditions in some cases requires the use of more stable porous materials such as carbons. In addition to their stability, porous carbon materials can be tailored for their ability to adsorb and catalytically activate different chemical compounds from the liquid and the gas phase. The difficulties imposed by the functionalization of carbons with chiral species were tackled in the past by carbonizing chiral ionic liquids (CILs) together with a template to create pores, which results in the entire body of a material that is built up from the precursor. To increase the atomic efficiency of ionic liquids for better economic utilization of CILs, the approach presented here is based on the formation of a composite between CIL-derived chiral carbon and a pristine carbon material obtained from carbohydrate precursors. Two novel enantioselective carbon composite materials are applied for the chiral recognition of molecules in the gas phase, as well as in solution. The enantiomeric ratio of the l-composite for phenylalanine from the solution was (L/D) = 8.4, and for 2-butanol from the gas phase, it was (S/R) = 1.3. The d-composite showed an opposite behavior, where the enantiomeric ratio for phenylalanine was (D/L) = 2.7, and for 2-butanol from the gas phase, it was (R/S) = 1.3.

| S-EPMC8289191 | biostudies-literature

Tuning fluorocarbon adsorption in new isoreticular porous coordination frameworks for heat transformation applications.

Project description:Adsorption heat transformation is one of the most energy-efficient technologies, which relies much on the type and performance of the adsorbent-adsorbate pair. Here, we report adsorption behaviors of a typical fluorocarbon R22 (CHClF2) in a new series of isoreticular porous coordination polymers [Zn4O(bpz)2(ldc)], in which the typical Zn4O clusters are connected by hydrophobic 3,3',5,5'-tetramethyl-4,4'-bipyrazolate (bpz2-) and different linear dicarboxylates (ldc2-) to form non-interpenetrated pcu networks with variable pore sizes, shapes, and volumes. Fluorocarbon sorption measurements of these materials revealed high R22 uptakes of 0.73-0.97 g g-1 (0.62-0.65 g cm-3) at 298 K and 1 bar and working capacities of 0.41-0.72 g g-1 (0.35-0.47 g cm-3) between 273 and 313 K at about 0.13, 0.11 and 0.52 bar, respectively, as well as very large diffusion coefficients of 5.1-7.3 × 10-7 cm2 s-1. Noteworthily, the R22 sorption performance can be dramatically improved by subtle modification of the pore size and shape, demonstrating porous coordination polymer-fluorocarbon as a promising adsorbent-adsorbate pair for heat transformation applications.

| S-EPMC5647857 | biostudies-literature

Highly Efficient Quantum Sieving in Porous Graphene-like Carbon Nitride for Light Isotopes Separation.

Project description:Light isotopes separation, such as (3)He/(4)He, H2/D2, H2/T2, etc., is crucial for various advanced technologies including isotope labeling, nuclear weapons, cryogenics and power generation. However, their nearly identical chemical properties made the separation challenging. The low productivity of the present isotopes separation approaches hinders the relevant applications. An efficient membrane with high performance for isotopes separation is quite appealing. Based on first-principles calculations, we theoretically demonstrated that highly efficient light isotopes separation, such as (3)He/(4)He, can be reached in a porous graphene-like carbon nitride material via quantum sieving effect. Under moderate tensile strain, the quantum sieving of the carbon nitride membrane can be effectively tuned in a continuous way, leading to a temperature window with high (3)He/(4)He selectivity and permeance acceptable for efficient isotopes harvest in industrial application. This mechanism also holds for separation of other light isotopes, such as H2/D2, H2/T2. Such tunable quantum sieving opens a promising avenue for light isotopes separation for industrial application.

| S-EPMC4728688 | biostudies-literature

Hydrophobic Magnetic Porous Material of Eichhornia crassipes for Highly Efficient Oil Adsorption and Separation.

Project description:Many oil adsorption materials are composed of nonrenewable raw materials, and their disposal can increase resource consumption and cause new environmental pollution. In this paper, the carbonized Eichhornia crassipes (CEC) were immobilized with Fe3O4 magnetic nanoparticles and modified with 1H, 1H, 2H, 2H-perfluorooctyltriethoxysilane (PFOS) to prepare an oil adsorption material, referred to here as CEC/Fe3O4/PFOS. The magnetic and mechanical strength of the CEC was enhanced by adding Fe3O4 magnetic particles, which enable it efficient to dispose the oil/water solution. CEC/Fe3O4/PFOS shows high porosity (83.53%), low skeletal density (0.487 g/cm3), excellent magnetism, ultrahigh oil absorption capacity (49.94-140.90 g/g), hydrophobic performances with a water contact angle of 150.1 ± 2.3°, and a sliding angle of 10.5°. It is worth noting that the material can be recycled, and the absorbed oil is obtained by distillation. Therefore, this work may provide a candidate for solving the problem of oil pollution using E. crassipes.

| S-EPMC7203981 | biostudies-literature

Fabrication of silica/calcium alginate nanocomposite based on rice husk ash for efficient adsorption of phenol from water.

Project description:The current work discusses the synthesis of three different solid adsorbents: silica nanoparticles derived from rice husk (RS), calcium alginate beads (AG), and silica/alginate nanocomposite (RSG). The fabricated solid adsorbents were characterized by using different physicochemical techniques such as TGA, XRD, nitrogen adsorption/desorption analysis, ATR-FTIR, pHPZC, SEM, and TEM. The adsorption efficiencies of the prepared solid adsorbents were considered for the removal of phenol as a selected hazardous pollutant. Because of its improved adsorption capacity and environmentally friendly character, a composite made of biosilica nanoparticles and naturally occurring alginate biopolymer by click chemistry is significant in environmental treatment. Adding silica nanoparticles to the alginate biopolymer hydrogel has many advantages, including increased surface area, easier recovery of the solid adsorbent, and additional surface chemical functional groups. The silica/alginate nanocomposite showed surface heterogeneity with many chemical functional groups present, whereas silica nanoparticles had the highest surface area (893.1 m2 g-1). It has been found that the average TEM particle size of RS, AG, and RSG was between 18 and 82 nm. RSG displayed the maximum adsorption capacity of phenol (100.55 mg g-1) at pH 7 and 120 min as equilibrium adsorption time. Adsorption of phenol onto the solid adsorbents fit well with a nonlinear Langmuir isotherm with favorable adsorption. Kinetic and thermodynamic studies prove that the adsorption process follows a pseudo-second-order kinetic model, endothermic process, physical, and spontaneous adsorption. Sodium hydroxide is effective in desorbing 94% of the loaded phenols, according to desorption investigations. Solid reusability tests showed that, after seven cycles of phenol adsorption/desorption, RSG lost only 8.8% of its adsorption activity.

| S-EPMC11298972 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data