Browse
Submit Data
Databases
API
Help

Dataset Information

27 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Role of Lithium Doping in P2-Na_0.67Ni_0.33Mn_0.67O₂ for Sodium-Ion Batteries.

ABSTRACT: P2-structured Na_0.67Ni_0.33Mn_0.67O₂ (PNNMO) is a promising Na-ion battery cathode material, but its rapid capacity decay during cycling remains a hurdle. Li doping in layered transition-metal oxide (TMO) cathode materials is known to enhance their electrochemical properties. Nevertheless, the influence of Li at different locations in the structure has not been investigated. Here, the crystallographic role and electrochemical impact of lithium on different sites in PNNMO is investigated in Li _x Na_0.67-y Ni_0.33Mn_0.67O_2+δ (0.00 ≤ x ≤ 0.2, y = 0, 0.1). Lithium occupancy on prismatic Na sites is promoted in Na-deficient (Na < 0.67) PNNMO, evidenced by ex situ and operando synchrotron X-ray diffraction, X-ray absorption spectroscopy, and ⁷Li solid-state nuclear magnetic resonance. Partial substitution of Na with Li leads to enhanced stability and slightly increased specific capacity compared to PNNMO. In contrast, when lithium is located primarily on octahedral TM sites, capacity is increased but at the cost of stability.

SUBMITTER: Xie Y

PROVIDER: S-EPMC8276578 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Characterization of Na x Li0.67+y Ni0.33Mn0.67O2 as a positive electrode material for lithium-ion batteries.

Project description:The relationship between the charge-discharge properties and crystal structure of Na x Li0.67+y Ni0.33Mn0.67O2 (0.010 ≤ x ≤ 0.013, 0.16 ≤ y ≤ 0.20) has been investigated. Li/Na x Li0.67+y Ni0.33Mn0.67O2 cells exhibit gradually sloping initial charge and discharge voltage-capacity curves. The initial charge capacity increased from 171 mA h g-1 for thermally-treated Na0.15Li0.51Ni0.33Mn0.67O2 to 226 mA h g-1 for Na0.010Li0.83Ni0.33Mn0.67O2 with an increase in the Li content. The initial maximum discharge capacity was 252 mA h g-1 in the case of Na0.010Li0.83Ni0.33Mn0.67O2 between 4.8 and 2.0 V at a fixed current density of 15 mA g-1 (0.06C) at 25 °C. The predominance of the spinel phase leads to the high initial discharge capacity of Na0.010Li0.83Ni0.33Mn0.67O2. This study shows that chemical lithiation using LiI is effective to improve the electrochemical properties.

| S-EPMC9083028 | biostudies-literature

Enhanced Rate Capability and Cycle Performance of Titanium-Substituted P2-Type Na0.67Fe0.5Mn0.5O2 as a Cathode for Sodium-Ion Batteries.

Project description:In this study, we developed a doping technology capable of improving the electrochemical performance, including the rate capability and cycling stability, of P2-type Na0.67Fe0.5Mn0.5O2 as a cathode material for sodium-ion batteries. Our approach involved using titanium as a doping element to partly substitute either Fe or Mn in Na0.67Fe0.5Mn0.5O2. The Ti-substituted Na0.67Fe0.5Mn0.5O2 shows superior electrochemical properties compared to the pristine sample. We investigated the changes in the crystal structure, surface chemistry, and particle morphology caused by Ti doping and correlated these changes to the improved performance. The enhanced rate capability and cycling stability were attributed to the enlargement of the NaO2 slab in the crystal structure because of Ti doping. This promoted Na-ion diffusion and prevented the phase transition from the P2 to the OP4/″Z″ structure.

| S-EPMC6641373 | biostudies-literature

Uniform Na+ Doping-Induced Defects in Li- and Mn-Rich Cathodes for High-Performance Lithium-Ion Batteries.

Project description:The corrosion of Li- and Mn-rich (LMR) electrode materials occurring at the solid-liquid interface will lead to extra electrolyte consumption and transition metal ions dissolution, causing rapid voltage decay, capacity fading, and detrimental structure transformation. Herein, a novel strategy is introduced to suppress this corrosion by designing an Na+-doped LMR (Li1.2Ni0.13Co0.13Mn0.54O2) with abundant stacking faults, using sodium dodecyl sulfate as surfactant to ensure the uniform distribution of Na+ in deep grain lattices-not just surface-gathering or partially coated. The defective structure and deep distribution of Na+ are verified by Raman spectrum and high-resolution transmission electron microscopy of the as-prepared electrodes before and after 200 cycles. As a result, the modified LMR material shows a high reversible discharge specific capacity of 221.5 mAh g-1 at 0.5C rate (1C = 200 mA g-1) after 200 cycles, and the capacity retention is as high as 93.1% which is better than that of pristine-LMR (64.8%). This design of Na+ is uniformly doped and the resultanting induced defective structure provides an effective strategy to enhance electrochemical performance which should be extended to prepare other advanced cathodes for high performance lithium-ion batteries.

| S-EPMC6661944 | biostudies-literature

Structural Origins of Voltage Hysteresis in the Na-Ion Cathode P2-Na0.67[Mg0.28Mn0.72]O2: A Combined Spectroscopic and Density Functional Theory Study.

Project description:P2-layered sodium-ion battery (NIB) cathodes are a promising class of Na-ion electrode materials with high Na+ mobility and relatively high capacities. In this work, we report the structural changes that take place in P2-Na0.67[Mg0.28Mn0.72]O2. Using ex situ X-ray diffraction, Mn K-edge extended X-ray absorption fine structure, and 23Na NMR spectroscopy, we identify the bulk phase changes along the first electrochemical charge-discharge cycle-including the formation of a high-voltage "Z phase", an intergrowth of the OP4 and O2 phases. Our ab initio transition state searches reveal that reversible Mg2+ migration in the Z phase is both kinetically and thermodynamically favorable at high voltages. We propose that Mg2+ migration is a significant contributor to the observed voltage hysteresis in Na0.67[Mg0.28Mn0.72]O2 and identify qualitative changes in the Na+ ion mobility.

| S-EPMC8280737 | biostudies-literature

Rb/Cs-Modified P2 Na0.7Mn0.8Mg0.2O2: Application in Sodium-Ion Batteries.

Project description:To meet the growing energy demands, sodium-ion batteries can be a potential substitute for lithium-ion batteries. Here, we report the solid-state synthesized alkali Rb- and Cs-modified Na0.7Mn0.8Mg0.2O2, which adopts hexagonal P63/mmc symmetry. The second charge/discharge capacity for the as-synthesized Rb- and Cs-modified P2 Na0.7Mn0.8Mg0.2O2 are 118/114 and 130/125 mA h g-1, which reduces to 62/62 and 77/76 mA h g-1, respectively, after 100 cycles. In situ synchrotron X-ray diffraction data illustrate that a solid solution reaction occurs for most of the charge/discharge process in both cases. Rb-modified P2 Na0.7Mn0.8Mg0.2O2 shows multiple phases near the charged state, whereas Cs-modified P2 Na0.7Mn0.8Mg0.2O2 shows the formation of a new phase (P2new) at about 2.5 V and multiple phases below 1.7 V. The P2new phase is found to evolve in conjunction with the original P2 phase until about 1.7 V, where the P2 reflection appears to split into multiple reflections and a single P2 phase is recovered at 2.7 V on the second charge. The Cs-modified P2 Na0.7Mn0.8Mg0.2O2 shows better energy density in comparison with the K- and Rb-modified P2 Na0.7Mn0.8Mg0.2O2 and comparable to the parent P2 Na0.7Mn0.8Mg0.2O2. Ex situ scanning electron microscopy images show no noticeable change in surface morphology of the Cs-modified Na0.7Mn0.8Mg0.2O2, whereas in the case of Rb-modified P2 Na0.7Mn0.8Mg0.2O2, rods and irregular-shaped particles are observed after the 100th cycle. The solid-state 23Na NMR shows a distinct shift in the peak position in comparison with the parent P2 Na0.7Mn0.8Mg0.2O2, and two Na environments are observed with no local disordering in Rb- and Cs-modified P2 Na0.7Mn0.8Mg0.2O2 samples. Overall, this article illustrates the influence of using larger alkali ions to modify P2 Na0.7Mn0.8Mg0.2O2 and compares this scheme in terms of phase transitions and electrochemical performance.

| S-EPMC6648630 | biostudies-literature

Ti surface doping of LiNi0.5Mn1.5O4-δ positive electrodes for lithium ion batteries.

Project description:The particle surface of LiNi0.5Mn1.5O4-δ (LNMO), a Li-ion battery cathode material, has been modified by Ti cation doping through a hydrolysis-condensation reaction followed by annealing in oxygen. The effect of different annealing temperatures (500-850 °C) on the Ti distribution and electrochemical performance of the surface modified LNMO was investigated. Ti cations diffuse from the preformed amorphous 'TiO x ' layer into the LNMO surface during annealing at 500 °C. This results in a 2-4 nm thick Ti-rich spinel surface having lower Mn and Ni content compared to the core of the LNMO particles, which was observed with scanning transmission electron microscopy coupled with compositional EDX mapping. An increase in the annealing temperature promotes the formation of a Ti bulk doped LiNi(0.5-w)Mn(1.5+w)-t Ti t O4 phase and Ti-rich LiNi0.5Mn1.5-y Ti y O4 segregates above 750 °C. Fourier-transform infrared spectrometry indicates increasing Ni-Mn ordering with annealing temperature, for both bare and surface modified LNMO. Ti surface modified LNMO annealed at 500 °C shows a superior cyclic stability, coulombic efficiency and rate performance compared to bare LNMO annealed at 500 °C when cycled at 3.4-4.9 V vs. Li/Li+. The improvements are probably due to suppressed Ni and Mn dissolution with Ti surface doping.

| S-EPMC9078446 | biostudies-literature

Multiprincipal Component P2-Na0.6(Ti0.2Mn0.2Co0.2Ni0.2Ru0.2)O2 as a High-Rate Cathode for Sodium-Ion Batteries.

Project description:Mixing transition metal cations in nearly equiatomic proportions in layered oxide cathode materials is a new strategy for improving the performances of Na-ion batteries. The mixing of cations not only offers entropic stabilization of the crystal structure but also benefits the diffusion of Na ions with tuned diffusion activation energy barriers. In light of this strategy, a high-rate Na0.6(Ti0.2Mn0.2Co0.2Ni0.2Ru0.2)O2 cathode was designed, synthesized, and investigated, combining graph-based deep learning calculations and complementary experimental characterizations. This new cathode material delivers high discharge capacities of 164 mA g-1 at 0.1 C and 68 mAh g-1 at a very high rate of 86 C, demonstrating an outstanding high rate capability. Ex situ and operando synchrotron X-ray diffraction were used to reveal the detailed structural evolution of the cathode upon cycling. Using the climbing-image nudged elastic-band calculation and Ab initio molecular dynamics simulations, we show that the optimal transition metal composition enables a percolating network of low barrier pathways for fast, macroscopic Na diffusion, resulting in the observed high rate performance.

| S-EPMC8395632 | biostudies-literature

Understanding the redox process upon electrochemical cycling of the P2-Na0.78Co1/2Mn1/3Ni1/6O2 electrode material for sodium-ion batteries.

Project description:Rechargeable sodium-ion batteries have recently attracted renewed interest as an alternative to Li-ion batteries for electric energy storage applications, because of the low cost and wide availability of sodium resources. Thus, the electrochemical energy storage community has been devoting increased attention to designing new cathode materials for sodium-ion batteries. Here we investigate P2- Na0.78Co1/2Mn1/3Ni1/6O2 as a cathode material for sodium ion batteries. The main focus is to understand the mechanism of the electrochemical performance of this material, especially differences observed in redox reactions at high potentials. Between 4.2 V and 4.5 V, the material delivers a reversible capacity which is studied in detail using advanced analytical techniques. In situ X-ray diffraction reveals the reversibility of the P2-type structure of the material. Combined soft X-ray absorption spectroscopy and resonant inelastic X-ray scattering demonstrates that Na deintercalation at high voltages is charge compensated by formation of localized electron holes on oxygen atoms.

| S-EPMC9814369 | biostudies-literature

Ab Initio Study of AMBO3 (A = Li, Na and M = Mn, Fe, Co, Ni) as Cathode Materials for Li-Ion and Na-Ion Batteries.

Project description:According to the importance of polyanion cathode materials in intercalation batteries, they may play a significant role in energy-storage systems. Here, evaluations of LiMBO3 and NaMBO3 (M = Mn, Fe, Co, Ni) as cathode materials of Li-ion and Na-ion batteries, respectively, are performed in the density functional theory (DFT) framework. The structural properties, structural stability after deintercalation, cell voltage, electrical conductivity, and rate capability of the cathodes are assessed. As a result, Li compounds have more structural stability and energy density than Na compounds in the C2/c frame structure. Cell voltage is increased by increasing the atomic number of the transition metal (TM). A noble approach is used to evaluate electrical conductivity and rate capability. M = Fe compounds exhibit the lowest band gaps (BGs), and M = Mn compounds exhibit almost the highest one. The best electrical rate-capable compounds are estimated to be M = Mn ones and the worst are M = Ni ones. As far as cell potential is not the concern, AMnBO3, ACoBO3-AFeBO3, and ANiBO3 are the best to the worst considered cathode materials.

| S-EPMC7178776 | biostudies-literature

Nanoscale Lithium Quantification in LiXNiyCowMnZO2 as Cathode for Rechargeable Batteries.

Project description:Time-of-flight secondary ion mass spectrometry (TOF-SIMS) using a focused ion-beam scanning electron microscope (FIB-SEM) is a promising and economical technique for lithium detection and quantification in battery materials because it overcomes the limitations with detecting low Li content by energy dispersive spectroscopy (EDS). In this work, an experimental calibration curve was produced, which to our best knowledge allowed for the first time, the quantification of lithium in standard nickel manganese cobalt oxide (NMC-532) cathodes using 20?nm resolution. The technique overcomes matrix effects and edges effects that makes quantification complex. This work shows the high potential of TOF-SIMS tool for analytical characterization of battery materials, and demonstrates its tremendous capabilities towards identification of various chemical or electrochemical phenomena in the cathodes via high-resolution ion distributions. Various phenomena in the ion distributions are also assessed, such as edge effects or measurement artifacts from real signal variations.

| S-EPMC6279772 | biostudies-literature