Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Modifying Metastable Sr_1-xBO_3-δ (B = Nb, Ta, and Mo) Perovskites for Electrode Materials.

ABSTRACT: The presence of surface/deep defects in 4d- and 5d-perovskite oxide (ABO₃, B = Nb, Ta, Mo, etc.) nanoparticles (NPs), originating from multivalent B-site cations, contributes to suppressing their metallic properties. These defect states can be removed using a H₂/Ar thermal treatment, enabling the recovery of their electronic properties (i.e., low electrical resistivity, high carrier concentration, etc.) as expected from their electronic structure. Therefore, to engineer the electronic properties of these metastable perovskites, an oxygen-controlled crystallization approach coupled with a subsequent H₂/Ar treatment was utilized. A comprehensive study of the effect of the post-treatment time on the electronic properties of these perovskite NPs was performed using a combination of scattering, spectroscopic, and computational techniques. These measurements revealed that a metallic-like state is stabilized in these oxygen-reduced NPs due to the suppression of deep rather than surface defects. Ultimately, this synthetic approach can be employed to synthesize ABO₃ perovskite NPs with tunable electronic properties for application into electrochemical devices.

SUBMITTER: Ofoegbuna T

PROVIDER: S-EPMC8289236 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Effect of Zr, V, Nb, Mo, and Ta substitutions on magnetic properties and microstructure of melt-spun SmCo5 magnets.

Project description:We have investigated effects of metal substitutions on the magnetic properties and microstructure of melt-spun Sm-Co-Cu-Fe-M (M = Zr, V, Nb, Mo, Ta) magnets. We prepared melt-spun ribbons with compositions of Sm(Co1- x Cu x )5Fe0.54- y M y (x = 0.1-0.5, y = 0-0.43, M = Zr, V, Nb, Mo, Ta). For compositions of Sm(Co1- x Cu x )5Fe0.54 (x = 0.1-0.5), coercivity increased with increasing of annealing temperature, and a high coercivity of 17.6 kOe was obtained at a Cu content of x = 0.3. The coercivity was found to increase with increasing melting point of the substitution element. A high coercivity of 24.5 kOe was obtained for a composition of Sm(Co0.7Cu0.3)5Fe0.34Ta0.2.

| S-EPMC3977824 | biostudies-other

Nanosized and metastable molybdenum oxides as negative electrode materials for durable high-energy aqueous Li-ion batteries.

Project description:The development of inherently safe energy devices is a key challenge, and aqueous Li-ion batteries draw large attention for this purpose. Due to the narrow electrochemical stable potential window of aqueous electrolytes, the energy density and the selection of negative electrode materials are significantly limited. For achieving durable and high-energy aqueous Li-ion batteries, the development of negative electrode materials exhibiting a large capacity and low potential without triggering decomposition of water is crucial. Herein, a type of a negative electrode material (i.e., Li x Nb2/7Mo3/7O2) is proposed for high-energy aqueous Li-ion batteries. Li x Nb2/7Mo3/7O2 delivers a large capacity of ∼170 mA ⋅ h ⋅ g-1 with a low operating potential range of 1.9 to 2.8 versus Li/Li+ in 21 m lithium bis(trifluoromethanesulfonyl)amide (LiTFSA) aqueous electrolyte. A full cell consisting of Li1.05Mn1.95O4/Li9/7Nb2/7Mo3/7O2 presents high energy density of 107 W ⋅ h ⋅ kg-1 as the maximum value in 21 m LiTFSA aqueous electrolyte, and 73% in capacity retention is achieved after 2,000 cycles. Furthermore, hard X-ray photoelectron spectroscopy study reveals that a protective surface layer is formed at the surface of the negative electrode, by which the high-energy and durable aqueous batteries are realized with Li x Nb2/7Mo3/7O2 This work combines a high capacity with a safe negative electrode material through delivering the Mo-based oxide with unique nanosized and metastable characters.

| S-EPMC8640940 | biostudies-literature

The origin of hyperferroelectricity in LiBO3 (B?=?V, Nb, Ta, Os).

Project description:The electronic and structural properties of LiBO3 (B?=?V, Nb, Ta, Os) are investigated via first-principles methods. We show that LiBO3 belong to the recently proposed hyperferroelectrics (hyperFEs), i.e., they all have unstable longitudinal optic phonon modes. Especially, the ferroelectric-like instability in the metal LiOsO3, whose optical dielectric constant goes to infinity, is a limiting case of hyperFEs. Via an effective Hamiltonian, we further show that, in contrast to normal proper ferroelectricity, in which the ferroelectric instability usually comes from long-range coulomb interactions, the hyperFE instability is due to the structure instability driven by short-range interactions. This could happen in systems with large ion size mismatches, which therefore provides a useful guidance in searching for novel hyperFEs.

| S-EPMC5046123 | biostudies-literature

Synthesis and Characterization of a Novel Biocompatible Alloy, Ti-Nb-Zr-Ta-Sn.

Project description:Many current-generation biomedical implants are fabricated from the Ti-6Al-4V alloy because it has many attractive properties, such as low density and biocompatibility. However, the elastic modulus of this alloy is much larger than that of the surrounding bone, leading to bone resorption and, eventually, implant failure. In the present study, we synthesized and performed a detailed analysis of a novel low elastic modulus Ti-based alloy (Ti-28Nb-5Zr-2Ta-2Sn (TNZTS alloy)) using a variety of methods, including scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and tensile test. Additionally, the in vitro biocompatibility of the TNZTS alloy was evaluated using SCP-1, SaOs-2, and THP-1 cell lines and primary human osteoblasts. Compared to Ti-6Al-4V, the elastic modulus of TNZTS alloy was significantly lower, while measures of its in vitro biocompatibility are comparable. O2 plasma treatment of the surface of the alloy significantly increased its hydrophilicity and, hence, its in vitro biocompatibility. TNZTS alloy specimens did not induce the release of cytokines by macrophages, indicating that such scaffolds would not trigger inflammatory responses. The present results suggest that the TNZTS alloy may have potential as an alternative to Ti-6Al-4V.

| S-EPMC8509052 | biostudies-literature

Thermodynamic limit for synthesis of metastable inorganic materials.

Project description:Realizing the growing number of possible or hypothesized metastable crystalline materials is extremely challenging. There is no rigorous metric to identify which compounds can or cannot be synthesized. We present a thermodynamic upper limit on the energy scale, above which the laboratory synthesis of a polymorph is highly unlikely. The limit is defined on the basis of the amorphous state, and we validate its utility by effectively classifying more than 700 polymorphs in 41 common inorganic material systems in the Materials Project for synthesizability. The amorphous limit is highly chemistry-dependent and is found to be in complete agreement with our knowledge of existing polymorphs in these 41 systems, whether made by the nature or in a laboratory. Quantifying the limits of metastability for realizable compounds, the approach is expected to find major applications in materials discovery.

| S-EPMC5930398 | biostudies-literature

A Facile One-Step Synthesis of Cuprous Oxide/Silver Nanocomposites as Efficient Electrode-Modifying Materials for Nonenzyme Hydrogen Peroxide Sensor.

Project description:Cuprous oxide/silver (Cu₂O/Ag) nanocomposites were prepared via a facile one-step method and used to construct an electrochemical sensor for hydrogen peroxide (H₂O₂) detection. In this method, AgNO₃ and Cu(NO₃)₂ were reduced to Cu₂O/Ag nanocomposites by glucose in the presence of hexadecyl trimethyl ammonium bromide (CTAB) at a low temperature. The optimum condition was the molar ratio of silver nitrate and copper nitrate of 1:10, the temperature of 50 °C. Under this condition, Cu₂O/Ag nanocomposites were obtained with uniformly distributed and tightly combined Cu₂O and Ag nanoparticles. The size of Cu₂O particles was less than 100 nm and that of Ag particles was less than 20 nm. Electrochemical experiments indicate that the Cu₂O/Ag nanocomposites-based sensor possesses an excellent performance toward H₂O₂, showing a linear range of 0.2 to 4000 μM, a high sensitivity of 87.0 μA mM-1 cm-2, and a low detection limit of 0.2 μM. The anti-interference capability experiments indicate this sensor has good selectivity toward H₂O₂. Additionally, the H₂O₂ recovery tests of the sensor in diluted milk solution signify its potential application in routine H₂O₂ analysis.

| S-EPMC6523812 | biostudies-literature

Synthesis of Metastable Ternary Pd-W and Pd-Mo Transition Metal Carbide Nanomaterials.

Project description:Research and catalytic testing of platinum group transition metal carbides have been extremely limited due to a lack of reliable, simple synthetic approaches. Powder samples have been reported to phase separately above 1%, and only thin-film samples have been reported to have appreciable amounts of precious metal doping. Herein, we demonstrated, through the simple co-precipitation of Pd and W or Mo precursors and their subsequent annealing, the possibility to readily form ternary carbide powders. During the investigation of the Pd-W ternary system, we discovered a new hexagonal phase, (PdW)2C, which represents the first non-cubic Pd ternary carbide. Additionally, the solubility of Pd in the Pd-W-C and Pd-Mo-C systems was increased to 24 and 32%, respectively. As a potential application, these new materials show an enhanced activity for the methanol oxidation reaction (MOR) compared to industrial Pd/C.

| S-EPMC8588312 | biostudies-literature

Isothermal pressure-derived metastable states in 2D hybrid perovskites showing enduring bandgap narrowing.

Project description:Materials in metastable states, such as amorphous ice and supercooled condensed matter, often exhibit exotic phenomena. To date, achieving metastability is usually accomplished by rapid quenching through a thermodynamic path function, namely, heating-cooling cycles. However, heat can be detrimental to organic-containing materials because it can induce degradation. Alternatively, the application of pressure can be used to achieve metastable states that are inaccessible via heating-cooling cycles. Here we report metastable states of 2D organic-inorganic hybrid perovskites reached through structural amorphization under compression followed by recrystallization via decompression. Remarkably, such pressure-derived metastable states in 2D hybrid perovskites exhibit enduring bandgap narrowing by as much as 8.2% with stability under ambient conditions. The achieved metastable states in 2D hybrid perovskites via compression-decompression cycles offer an alternative pathway toward manipulating the properties of these "soft" materials.

| S-EPMC6094100 | biostudies-literature

Realistic microstructure evolution of complex Ta-Nb-Hf-Zr high-entropy alloys by simulation techniques.

Project description:Over last 15 years high-entropy alloys (HEAs) and complex concentrated alloys (CCAs) have gained much appreciation for their numerous superior properties. In this paper we have shown a novel simulation methodology to realistically predict the nanometer level local structural features of complex Ta0.25Nb0.25Hf0.25Zr0.25 HEA. This involves prediction of the morphology of the short-range clustering (SRCs), their quantitative atomic composition at the nano level and the thermodynamic aspects. An alloy structure model containing 11664 atoms was created and this was subjected to structure evolution at 1800?°C. The structure evolution technique is based on a combined hybrid Monte Carlo and molecular dynamics (MC/MD) approach. The simulated results from this work are further validated against experiments and material characterizations reported in literature and done by high-resolution transmission electron micrograph (HRTEM) for the nano-level microstructure, atom probe tomography (APT) for the local chemical compositions and X-ray diffraction at synchrotron sources for the local lattice relaxation effects. This work qualitatively and quantitatively reproduces the materials characterization results reasonably well from the developed simulation methodologies. The structure evolution methods as described in this work are based on independent computer simulations and does not involve any manual intervention for input based on experiments on evolving SRCs. This work shows the potential of utilizing MC/MD based computational methods to reduce the number of costly experimental characterizations and accelerate the pace for materials development.

| S-EPMC6841691 | biostudies-literature

Nb/Ta systematics in arc magma differentiation and the role of arclogites in continent formation.

Project description:The surfaces of rocky planets are mostly covered by basaltic crust, but Earth is unique in that it also has extensive regions of felsic crust, manifested in the form of continents. Exactly how felsic crust forms when basaltic magmas are the dominant products of melting the mantles of rocky planets is unclear. A fundamental part of the debate is centered on the low Nb/Ta of Earth's continental crust (11-13) compared to basalts (15-16). Here, we show that during arc magma differentiation, the extent of Nb/Ta fractionation varies with crustal thickness with the lowest Nb/Ta seen in continental arc magmas. Deep arc cumulates (arclogites) are found to have high Nb/Ta (average ~19) due to the presence of high Nb/Ta magmatic rutiles. We show that the crustal thickness control of Nb/Ta can be explained by rutile saturation being favored at higher pressures. Deep-seated magmatic differentiation, such as in continental arcs and other magmatic orogens, is thus necessary for making continents.

| S-EPMC6335430 | biostudies-literature