Effect of Using Different Chemical Dispersing Agents in Grain Size Analyses of Fluvial Sediments via Laser Diffraction Spectrometry.
Ontology highlight
ABSTRACT:
SUBMITTER: Abdulkarim M
PROVIDER: S-EPMC8293417 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Sedimentation has been a standard methodology for particle size analysis since the early 1900s. In recent years laser diffraction is beginning to replace sedimentation as the prefered technique in some industries, such as marine sediment analysis. However, for the particle size analysis of soils, which have a diverse range of both particle size and shape, laser diffraction still requires evaluation of its reliability. In this study, the sedimentation based sieve plummet balance method and the laser diffraction method were used to measure the particle size distribution of 22 soil samples representing four contrasting Australian Soil Orders. Initially, a precise wet riffling methodology was developed capable of obtaining representative samples within the recommended obscuration range for laser diffraction. It was found that repeatable results were obtained even if measurements were made at the extreme ends of the manufacturer's recommended obscuration range. Results from statistical analysis suggested that the use of sample pretreatment to remove soil organic carbon (and possible traces of calcium-carbonate content) made minor differences to the laser diffraction particle size distributions compared to no pretreatment. These differences were found to be marginally statistically significant in the Podosol topsoil and Vertosol subsoil. There are well known reasons why sedimentation methods may be considered to 'overestimate' plate-like clay particles, while laser diffraction will 'underestimate' the proportion of clay particles. In this study we used Lin's concordance correlation coefficient to determine the equivalence of laser diffraction and sieve plummet balance results. The results suggested that the laser diffraction equivalent thresholds corresponding to the sieve plummet balance cumulative particle sizes of < 2 μm, < 20 μm, and < 200 μm, were < 9 μm, < 26 μm, < 275 μm respectively. The many advantages of laser diffraction for soil particle size analysis, and the empirical results of this study, suggest that deployment of laser diffraction as a standard test procedure can provide reliable results, provided consistent sample preparation is used.
| S-EPMC5417517 | biostudies-literature
Project description:Eumycetoma, a chronic fungal infection endemic in India, Indonesia, and parts of Africa and South and Central America, follows traumatic implantation of saprophytic fungi and frequently requires radical surgery or amputation in the absence of appropriate treatment. Fungal species that can cause black-grain mycetomas include Madurella spp., Falciformispora spp., Trematosphaeria grisea, Nigrograna mackinnonii, Pseudochaetosphaeronema larense, Medicopsis romeroi, and Emarellia spp. Rhytidhysteron rufulum and Parathyridaria percutanea cause similar subcutaneous infections, but these infections lack the draining sinuses and fungal grains characteristic of eumycetoma. Accurate identification of the agents of subcutaneous fungal infection is essential to guide appropriate antifungal therapy. Since phenotypic identification of the causative fungi is often difficult, time-consuming molecular approaches are currently required. In the study described here we evaluated whether matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) mass spectrometry might allow the accurate identification of eumycetoma agents and related fungi. A panel of 57 organisms corresponding to 10 different species from confirmed cases of eumycetoma and subcutaneous pedal masses, previously formally identified by PCR amplification and sequencing of internal transcribed spacer 1 (ITS1), was employed. Representative isolates of each species were used to create reference MALDI-TOF spectra, which were then used for the identification of the remaining isolates in a user-blinded manner. Here, we demonstrate that MALDI-TOF mass spectrometry accurately identified all of the test isolates, with 100%, 90.4%, and 67.3% of isolates achieving log scores greater than 1.8, 1.9, and 2.0, respectively.
| S-EPMC5527430 | biostudies-literature
Project description:Laser diffraction (LD) is a well-established tool for the measurement of particle size distribution. Recently, its demand and use for the measurement of complex biological systems have increased. Among the challenges that these types of samples present, there is the presence of multiple particle populations whose modal size may span across several orders of magnitude. In this study, we assessed the accuracy of LD for the measurement of the modal diameter of both single and mixed populations of polystyrene particles with diameters ranging from 60 nm to 40 μm. We discuss the application of different available algorithms to the analysis of the data and their impact on the measurement results. Independent methods were applied to guide the selection of the algorithms and validate the measured size distributions. We found that the modal diameters of the particle size distribution measured by LD for the mixed suspension was accurate within 2 % for particles larger than 1 μm and generally within 25 % for the particles tested. Method repeatability was found to be robust, with deviations below 1%. The method was also found to be useful for estimating the relative concentration of the particle populations in the mixed samples. This study provides confidence in the use of LD for the measurement of complex multimodal colloidal samples.
| S-EPMC8190786 | biostudies-literature
Project description:The global outbreak of coronavirus disease 2019 (COVID-19) has raised concerns about the risk of airborne infection during dental treatment. Aerosol-generating dental procedures (AGDP) produce droplets and aerosols, but the details of the risks of COVID-19 transmission in AGDP are not well-understood. By discriminating between droplets and aerosols, we devised a method to measure particle size using laser diffraction analysis and evaluated aerosols generated from dental devices for providing a basis for proper infection control procedures. The droplets and aerosols generated from dental devices were characterized by multimodal properties and a wide range of droplet sizes, with the majority of droplets larger than 50 μm. AGDP emitted few aerosols smaller than 5 μm, which are of concern for pulmonary infections due to airborne transmission. In addition, the use of extraoral suction was found to prevent the spread of aerosols from high-speed dental engines. This study suggests that the risk of aerosol infections is considerably limited in regular dental practice and that current standard precautions, such as mainly focusing on protection against droplet and contact infections, are sufficient. While several cases of airborne transmission of COVID-19 in general clinics and emergency hospitals have been reported, cluster outbreaks in dental clinics have not yet been reported, which may indicate that AGDP does not pose a significant threat in contributing to the spread of SARS-CoV-2.
| S-EPMC8873144 | biostudies-literature
Project description:Laser-induced acoustic desorption (LIAD) was successfully coupled to a conventional atmospheric pressure chemical ionization (APCI) source in a commercial linear quadrupole ion trap mass spectrometer (LQIT). Model compounds representing a wide variety of different types, including basic nitrogen and oxygen compounds, aromatic and aliphatic compounds, as well as unsaturated and saturated hydrocarbons, were tested separately and as a mixture. These model compounds were successfully evaporated into the gas phase by using LIAD and then ionized by using APCI with different reagents. From the four APCI reagent systems tested, neat carbon disulfide provided the best results. The mixture of methanol and water produced primarily protonated molecules, as expected. However, only the most basic compounds yielded ions under these conditions. In sharp contrast, using APCI with either neat benzene or neat carbon disulfide as the reagent resulted in the ionization of all the analytes studied to predominantly yield stable molecular ions. Benzene yielded a larger fraction of protonated molecules than carbon disulfide, which is a disadvantage. A similar but minor amount of fragmentation was observed for these two reagents. When the experiment was performed without a liquid reagent (nitrogen gas was the reagent), more fragmentation was observed. Analysis of a known mixture as well as a petroleum cut was also carried out. In summary, the new experiment presented here allows the evaporation of thermally labile compounds, both polar and nonpolar, without dissociation or aggregation, and their ionization to predominantly form stable molecular ions.
| S-EPMC3073421 | biostudies-literature
Project description:Data file presents information on the variation in sea surface temperatures (SST), as well as geochemical (e.g. stable isotope, calcium carbonate), micropaleontological and grain size data from the Gloria Drift (Northwest Atlantic). The data are obtained from the three marine sediment gravity core sections (AMK-4493, AI-3646 and AI-3415) which were formed during Quaternary period. Dataset contains SST values (winter and summer: 0-50 water layer) and ice-rafted debris (IRD) counts, each in 308 samples; stable isotope data (δ18O and δ13C) from 235 samples; calcium carbonate content from 351 samples; relative abundance of polar species of planktonic foraminifera Neogloboquadrina pachyderma (sinistral) (Ehrenberg) in 51 samples, data of grain size analysis in bulk sediments (123 samples) and carbonate-free sediments (664). These data provide information about conditions of sedimentation at the Gloria Drift area.
| S-EPMC5997943 | biostudies-literature
Project description:The advent and application of the X-ray free-electron laser (XFEL) has uncovered the structures of proteins that could not previously be solved using traditional crystallography. While this new technology is powerful, optimization of the process is still needed to improve data quality and analysis efficiency. One area is sample heterogeneity, where variations in crystal size (among other factors) lead to the requirement of large data sets (and thus 10-100?mg of protein) for determining accurate structure factors. To decrease sample dispersity, we developed a high-throughput microfluidic sorter operating on the principle of dielectrophoresis, whereby polydisperse particles can be transported into various fluid streams for size fractionation. Using this microsorter, we isolated several milliliters of photosystem I nanocrystal fractions ranging from 200 to 600?nm in size as characterized by dynamic light scattering, nanoparticle tracking, and electron microscopy. Sorted nanocrystals were delivered in a liquid jet via the gas dynamic virtual nozzle into the path of the XFEL at the Linac Coherent Light Source. We obtained diffraction to ?4?Å resolution, indicating that the small crystals were not damaged by the sorting process. We also observed the shape transforms of photosystem I nanocrystals, demonstrating that our device can optimize data collection for the shape transform-based phasing method. Using simulations, we show that narrow crystal size distributions can significantly improve merged data quality in serial crystallography. From this proof-of-concept work, we expect that the automated size-sorting of protein crystals will become an important step for sample production by reducing the amount of protein needed for a high quality final structure and the development of novel phasing methods that exploit inter-Bragg reflection intensities or use variations in beam intensity for radiation damage-induced phasing. This method will also permit an analysis of the dependence of crystal quality on crystal size.
| S-EPMC4711642 | biostudies-literature
Project description:Cesium-137 (137Cs) is a persistent contaminant that poses a significant risk to human health and the environment. Understanding the fate and transport of 137Cs following a contamination incident is necessary for effective containment and remediation. In this study, we performed experiments to investigate how Cs+ sorption processes are affected by sediment type and varying water chemistries to better understand how Cs+ is transported in freshwater settings. Sediment was collected from various river deposits along the Susquehanna River adjacent to the Safety Light Corporation United States Environmental Protection Agency (US EPA) Superfund site (Bloomsburg, PA) and characterized prior to being used in batch reactor experiments with waters characteristic of different regions in the US (Central US and Northeast US) and with three different cation types (Mg2+, Na+, and K+) over a range of ionic strengths. Greater amounts of Cs+ sorption occurred with increasing sediment mud (silt and clay) content, although no major differences in sorption between the Central and Northeast US water types were observed. At an ionic strength (I) of 10 mM, K+ inhibited Cs+ sorption most effectively, followed by Mg2+, with Na+ having little effect on Cs+ sorption over the range of ionic strengths tested (I = 0.1, 1, and 10 mM). Our findings indicate that for the representative freshwater conditions tested here, sediment type (e.g., clay fraction) has a greater influence on Cs+ sorption processes than water chemistry. Additional reactions or processes occurring in relatively fresh water could buffer cation competition for sorption sites. Conducting experiments using site-specific sediment samples and water chemistries is useful for predicting Cs+ sorption and mobility in distinct environmental settings, particularly when the level of Cs+ contamination is high and if the waste or contaminated (or receiving) waters have a relatively high ionic strength.
| S-EPMC7061312 | biostudies-literature
Project description:Mathematical descriptions of classical particle size distribution (PSD) data are often used to estimate soil hydraulic properties. Laser diffraction methods (LDM) now provide more detailed PSD measurements, but deriving a function to characterize the entire range of particle sizes is a major challenge. The aim of this study was to compare the performance of eighteen PSD functions for fitting LDM data sets from a wide range of soil textures. These models include five lognormal models, five logistic models, four van Genuchten models, two Fredlund models, a logarithmic model, and an Andersson model. The fits were evaluated using Akaike's information criterion (AIC), adjusted R2, and root-mean-square error (RMSE). The results indicated that the Fredlund models (FRED3 and FRED4) had the best performance for most of the soils studied, followed by one logistic growth function extension model (MLOG3) and three lognormal models (ONLG3, ORLG3, and SHCA3). The performance of most PSD models was better for soils with higher silt content and poorer for soils with higher clay and sand content. The FRED4 model best described the PSD of clay, silty clay, clay loam, silty clay loam, silty loam, loam, and sandy loam, whereas FRED3, MLOG3, ONLG3, ORLG3, and SHCA3 showed better performance for most soils studied.
| S-EPMC4416045 | biostudies-literature
Project description:This is a dataset of grain-size distribution in sub- and supercritical flow sediments of a Gilbert-type delta from an outcrop in North Germany. Thirteen samples of ca 2.5 kg were dried (at 105°C), and homogenised twice with a sample divider. A representative sample of 1-2 g was then analysed using laser diffraction. The grain-size distribution of the sand has a maximum between fine to medium sand, with a long fine fraction tail down to 0.06 µm and occasional coarse fractions (up to 1.5 mm) in some samples. Specific grain-size distributions correlate with the different sedimentary bedforms from which the samples were taken. This data is important for two reasons: Firstly, sedimentary structures formed by Froude supercritical flows are controlled by grain-size. However, few studies have provided grain-size datasets from the natural record, which often have a much wider grain-size distribution than experimentally-produced supercritical flow deposits. Secondly, the sands were deformed subsequently by disaggregation bands, a type of geological fault that only develops in porous granular materials, i.e. well-sorted, medium sand. The disaggregation bands are indicative of seismic or even aseismic, creeping movement of basement faults.
| S-EPMC9763731 | biostudies-literature