Browse
Submit Data
Databases
API
Help

Dataset Information

16 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The Effect of pH and Storage Temperature on the Stability of Emulsions Stabilized by Rapeseed Proteins.

ABSTRACT: Rapeseed press cake (RPC), the by-product of rapeseed oil production, contains proteins with emulsifying properties, which can be used in food applications. Proteins from industrially produced RPC were extracted at pH 10.5 and precipitated at pH 3 (RPP3) and 6.5 (RPP6.5). Emulsions were formulated at three different pHs (pH 3, 4.5, and 6) with soy lecithin as control, and were stored for six months at either 4 °C or 30 °C. Zeta potential and droplet size distribution were analyzed prior to incubation, and emulsion stability was assessed over time by a Turbiscan instrument. Soy lecithin had significantly larger zeta potential (-49 mV to 66 mV) than rapeseed protein (-19 mV to 20 mV). Rapeseed protein stabilized emulsions with smaller droplets at pH close to neutral, whereas soy lecithin was more efficient at lower pHs. Emulsions stabilized by rapeseed protein had higher stability during storage compared to emulsions prepared by soy lecithin. Precipitation pH during the protein extraction process had a strong impact on the emulsion stability. RPP3 stabilized emulsions with higher stability in pHs close to neutral, whereas the opposite was found for RPP6.5, which stabilized more stable emulsions in acidic conditions. Rapeseed proteins recovered from cold-pressed RPC could be a suitable natural emulsifier and precipitation pH can be used to monitor the stability in emulsions with different pHs.

SUBMITTER: Ostbring K

PROVIDER: S-EPMC8303418 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Enhancement of storage stability of surimi particles stabilized novel pickering emulsions: Effect of different sequential ultrasonic processes.

Project description:Preparation of highly stable Pickeringemulsions stabilized by food grade particles especially with low concentrations is of concern. In this study, the effects of two-step emulsification procedure with different sequential ultrasonic processes on the storage stability, droplets size, zeta potential, microstructures as well as the rheological behaviors of surimi particles-stabilized Pickeringemulsions with 0.6 oil-water ratio were investigated. The results showed that the surimi particles based-emulsions prepared by the homogenization-ultrasonic (H-U) or ultrasonic-homogenization (U-H) method both possessed excellent physical stability during 14 days storage. Particularly, the stability index of emulsions all exceeded 99.5% in the U-H groups. The confocal laser scanning microscopy (CLSM) and cryo-scanning electron microscope (cryo-SEM) images provide evidence that more particles attached on the oil-water interfaces and the network structures formed via particle-particle interactions obviously arrested phase separation in H-U and U-H emulsions. Moreover, the Pickering emulsions obtained by two-step method all exhibited higher viscosity and storage modulus values, which were also conducive to the special storage stability of samples. In short, the storage stability of protein based-Pickering emulsions can be enhanced using homogenization-ultrasonic (H-U) or ultrasonic-homogenization (U-H) procedure.

| S-EPMC8560627 | biostudies-literature

Pectin Stabilized Fish Gelatin Emulsions: Physical Stability, Rheological, and Interaction Properties

Project description:Pectin, a kind of natural polysaccharide, shows the attractive potential as a natural stabilizer for protein emulsion. The aim of this study is to investigate the effect of pectin on the physical stability, rheology, interface, and interaction properties of the fish gelatin (FG) emulsion, as pectin was utilized to improve the stability of FG, fish oil emulsion. During the study, when pH < 6, the FG-pectin emulsion displayed better storage stability and salinity tolerance. Analyzing the result, pectin could avoid phase separation at the freeze-thaw process and prevent the liquid-gel transition of FG emulsions during storage. On the other hand, when pH ≥ 6, the emulsion displayed high viscosity due to the complex flocculation and stratified during long-term storage. Electrostatic interactions, hydrophobic interactions, and hydrogen bonding of the FG-pectin complexes in the emulsion were all reduced. Overall, pectin improved the stability of FG emulsions through electrostatic repulsion, hydrophobic interactions, and steric hindrance.

| S-EPMC9326445 | biostudies-literature

Temperature-triggered reversible breakdown of polymer-stabilized olive-silicone oil Janus emulsions.

Project description:A one-step moderate energy vibrational emulsification method was successfully employed to produce thermo-responsive olive/silicone-based Janus emulsions stabilized by poly(N,N-diethylacrylamide) carrying 0.7 mol% oleoyl side chains. Completely engulfed emulsion droplets remained stable at room temperature and could be destabilized on demand upon heating to the transition temperature of the polymeric stabilizer. Time-dependent light micrographs demonstrate the temperature-induced breakdown of the Janus droplets, which opens new aspects of application, for instance in biocatalysis.

| S-EPMC9064947 | biostudies-literature

Clove Essential Oil Pickering Emulsions Stabilized with Lactoferrin/Fucoidan Complexes: Stability and Rheological Properties.

Project description:Although studies have shown that lactoferrin (LF) and fucoidan (FD) can be used to stabilize Pickering emulsions, there have been no studies on the stabilization of Pickering emulsions via the use of LF-FD complexes. In this study, different LF-FD complexes were obtained by adjusting the pH and heating the LF and FD mixture while using different mass ratios, and the properties of the LF-FD complexes were investigated. The results showed that the optimal conditions for preparing the LF-FD complexes were a mass ratio of 1:1 (LF to FD) and a pH of 3.2. Under these conditions, the LF-FD complexes not only had a uniform particle size of 133.27 ± 1.45 nm but also had good thermal stability (the thermal denaturation temperature was 110.3 °C) and wettability (the air-water contact angle was 63.9 ± 1.90°). The concentration of the LF-FD complexes and the ratio of the oil phase influenced the stability and rheological properties of the Pickering emulsion such that both can be adjusted to prepare a Pickering emulsion with good performance. This indicates that LF-FD complexes represent promising applications for Pickering emulsions with adjustable properties.

| S-EPMC10143265 | biostudies-literature

Effect of polyphenolic structure and mass ratio on the emulsifying performance and stability of emulsions stabilized by polyphenol-corn amylose complexes.

Project description:O/W emulsions stabilized by polyphenol/amylose (AM) complexes with several polyphenol/AM mass ratios and different polyphenols (gallic acid (GA), epigallocatechin gallate (EGCG) and tannic acid (TA)) were prepared by a high-intensity ultrasound emulsification technique. The effect of the pyrogallol group number of polyphenols and the mass ratio of polyphenols/AM on polyphenol/AM complexes and emulsions was studied. The soluble and/or insoluble complexes gradually formed upon adding polyphenols into the AM system. However, insoluble complexes were not formed in the GA/AM systems because GA has only one pyrogallol group. In addition, the hydrophobicity of AM could also be improved by forming polyphenol/AM complexes. The emulsion size decreased with increasing pyrogallol group number on the polyphenol molecules at a fixed ratio, and the size could also be controlled by the polyphenol/AM ratio. Moreover, all emulsions presented various degrees of creaming, which was restrained by decreasing emulsion size or the formation of a thick complex network. The complex network was enhanced by increasing the ratio or pyrogallol group number on the polyphenol molecules, which was because the increasing number of complexes was adsorbed onto the interface. Altogether, compared to GA/AM and EGCG/AM, the TA/AM complex emulsifier had the best hydrophobicity and emulsifying properties, and the TA/AM emulsion had the best emulsion stability.

| S-EPMC10034494 | biostudies-literature

Effect of thermal ballast loading on temperature stability of domestic refrigerators used for vaccine storage.

Project description:Vaccine temperature control failures represent a significant public and private healthcare cost. Vaccines damaged by excessive heat or freezing lose their effectiveness, putting public health at risk. Some vaccine administration programs recommend placing water bottles inside domestic refrigerators used for vaccine storage as a thermal ballast, to mitigate temperature excursion risks. However, the effect of variable thermal ballast loading on refrigerator performance has not been thoroughly quantified or documented, and generalized programmatic recommendations are subject to end-user interpretation. Here we show that a thermal ballast load comprising ten to fifteen percent of the total refrigerator storage volume provides a measurable effect on domestic refrigerator temperature stability during power outage events, maintaining vaccine temperatures between 2 °C and 8 °C for 4 to 6 hours without power. Thermal ballast usage does not reliably reduce the frequency or severity of temperature excursions caused by repeated door opening, accidental "door left open" events, or refrigerator defrost cycle activation. Use of a moderate thermal ballast load is a practical strategy for mitigating temperature excursions risks in areas with frequent or protracted power outages, but the practice has limited benefit in other adverse scenarios. Empowering providers to make informed decisions about the use of thermal ballast materials supports better, safer vaccine management.

| S-EPMC7343171 | biostudies-literature

Interfacial Molecular Imprinting in Nanoparticle-Stabilized Emulsions.

Project description:A new interfacial nano and molecular imprinting approach is developed to prepare spherical molecularly imprinted polymers with well-controlled hierarchical structures. This method is based on Pickering emulsion polymerization using template-modified colloidal particles. The interfacial imprinting is carried out in particle-stabilized oil-in-water emulsions, where the molecular template is presented on the surface of silica nanoparticles during the polymerization of the monomer phase. After polymerization, the template-modified silica nanoparticles are removed from the new spherical particles to leave tiny indentations decorated with molecularly imprinted sites. The imprinted microspheres prepared using the new interfacial nano and molecular imprinting have very interesting features: a well-controlled hierarchical structure composed of large pores decorated with easily accessible molecular binding sites, group selectivity toward a series of chemicals having a common structural moiety (epitopes), and a hydrophilic surface that enables the MIPs to be used under aqueous conditions.

| S-EPMC3139405 | biostudies-literature

Physical and Oxidative Stability of Emulsions Stabilized with Fractionated Potato Protein Hydrolysates Obtained from Starch Production Side Stream

Project description:This work studies the emulsifying and antioxidant properties of potato protein hydrolysates (PPHs) fractions obtained through enzymatic hydrolysis of potato protein using trypsin followed by ultrafiltration. Unfractionated (PPH1) and fractionated (PPH2 as >10 kDa, PPH3 as 10–5 kDa, PPH4 as 5–0.8 kDa, and PPH5 as <0.8 kDa) protein hydrolysates were evaluated. Pendant drop tensiometry and dilatational rheology were applied for determining the ability of PPHs to reduce interfacial tension and affect the viscoelasticity of the interfacial films at the oil–water interface. Peptides >10 kDa showed the highest ability to decrease oil–water interfacial tension. All PPH fractions predominantly provided elastic, weak, and easily stretchable interfaces. PPH2 provided a more rigid interfacial layer than the other hydrolysates. Radical scavenging and metal chelating activities of PPHs were also tested and the highest activities were provided by the unfractionated hydrolysate and the fractions with peptides >5 kDa. Furthermore, the ability of PPHs to form physically and oxidatively stable 5% fish oil-in-water emulsions (pH 7) was investigated during 8-day storage at 20 °C. Our results generally show that the fractions with peptides >5 kDa provided the highest physicochemical stability, followed by the fraction with peptides between 5 and 0.8 kDa. Lastly, promising sensory results with mostly mild attributes were obtained even at protein concentration levels that are higher than needed to obtain functional properties. The more prominent attributes (e.g., bitterness and astringency) were within an acceptable range for PPH3 and PPH4.

| S-EPMC10451251 | biostudies-literature

Pickering emulsions stabilized by coloured organic pigment particles.

Project description:The possibility of stabilizing emulsions of water and non-polar alkane with pure, coloured organic pigment particles is explored. Seven pigment types each possessing a primary colour of the rainbow were selected. Their solubility in water or heptane was determined using a spectrophotometric method and their surface energies were derived from the contact angles of probe liquids on compressed disks of the particles. As expected, most of the pigments are relatively hydrophobic but pigment orange is quite hydrophilic. At equal volumes of oil and water, preferred emulsions were water-in-oil (w/o) for six pigment types and oil-in-water (o/w) for pigment orange. The emulsion type is in line with calculated contact angles of the particles at the oil-water interface being either side of 90°. Their stability to coalescence increases with particle concentration. Emulsions are shown to undergo limited coalescence from which the coverage of drop interfaces by particles has been determined. In a few cases, close-packed primary particles are visible around emulsion droplets. At constant particle concentration, the influence of the volume fraction of water (φw) on emulsions was also studied. For the most hydrophilic pigment orange, emulsions are o/w at all φw, whereas they are w/o for the most hydrophobic pigments (red, yellow, green and blue). For pigments of intermediate hydrophobicity however (indigo and violet), catastrophic phase inversion becomes possible with emulsions inverting from w/o to o/w upon increasing φw. For the first time, we link the pigment surface energy to the propensity of emulsions to phase invert transitionally or catastrophically.

| S-EPMC5465566 | biostudies-literature

Effect of storage temperature on the antioxidant activity and catechins stability of Matcha (<i>Camellia sinensis</i>).

Project description:This study was conducted to evaluate the storage conditions of matcha (Camellia sinensis) according to temperature during 2 months. The moisture content of matcha tend to decrease with increasing temperature. To evaluate the brightness and green value of matcha, changes in L* and G* values were examined. These values decreased with increasing temperature and time. Total phenolic content and total flavonoid content also decreased with increasing temperature and time. ABTS and DPPH radical scavenging activities decreased with the increase in storage temperature and time. The content of catechins such as epicatechin, epigallocatechin, epicatechin gallate and epigallocatechin gallate showed a tendency to decrease gradually according to the storage temperature and time. Also, caffeine and rutin content in matcha significantly decreased according to storage temperature and time. This study could be used as basic data to determine optimal storage conditions by measuring physiological changes according to the temperature conditions of matcha.

| S-EPMC7406592 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data