Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A-π-D-π-A-Based Small Molecules for OTFTs Containing Diketopyrrolopyrrole as Acceptor Units.

ABSTRACT: A-π-D-π-A-based small molecules 6,6'-((thiophene-2,5-diylbis(ethyne-2,1-diyl))bis(thiophene-5,2-diyl))bis(2,5-bis(2-ethylhexyl)-3-(thiophen-2-yl)-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione) (TDPP-T) and 6,6'-(((2,3-dihydrothieno[3,4-b][1,4]dioxine-5,7-diyl)bis(ethyne-2,1-diyl))bis(thiophene-5,2-diyl))bis(2,5-bis(2-ethylhexyl)-3-(thiophen-2-yl)-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione) (TDPP-EDOT) have been designed and synthesized. The diketopyrrolopyrrole acts as an electron acceptor, while the thiophene or 3,4-ethylenedioxythiophene acts as an electron donor. The donor-acceptor groups are connected by an ethynyl bridge to further enhance the conjugation. The optoelectronics, electrochemical, and thermal properties have been investigated. Organic thin film transistor (OTFT) devices prepared from TDPP-T and TDPP-EDOT have shown p-type mobility. In as cast films, TDPP-T and TDPP-EDOT have shown a hole mobility of 5.44 × 10^-6 cm² V^-1 s^-1 and 4.13 × 10^-6 cm² V^-1 s^-1, respectively. The increase in the mobility of TDPP-T and TDPP-EDOT OTFT devices was observed after annealing at 150 °C, after which the mobilities were 3.11 × 10^-4 cm² V^-1 s^-1 and 2.63 × 10^-4 cm² V^-1 s^-1, respectively.

SUBMITTER: Shaik B

PROVIDER: S-EPMC8304449 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Organic Transistors Based on Highly Crystalline Donor-Acceptor π-Conjugated Polymer of Pentathiophene and Diketopyrrolopyrrole.

Project description:Oligomers and polymers consisting of multiple thiophenes are widely used in organic electronics such as organic transistors and sensors because of their strong electron-donating ability. In this study, a solution to the problem of the poor solubility of polythiophene systems was developed. A novel π-conjugated polymer material, PDPP-5Th, was synthesized by adding the electron acceptor unit, DPP, to the polythiophene system with a long alkyl side chain, which facilitated the solution processing of the material for the preparation of devices. Meanwhile, the presence of the multicarbonyl groups within the DPP molecule facilitated donor-acceptor interactions in the internal chain, which further improved the hole-transport properties of the polythiophene-based material. The weak forces present within the molecules that promoted structural coplanarity were analyzed using theoretical simulations. Furthermore, the grazing incidence wide-angle X-ray scanning (GIWAXS) results indicated that PDPP-5Th features high crystallinity, which is favorable for efficient carrier migration within and between polymer chains. The material showed hole transport properties as high as 0.44 cm2 V-1 s-1 in conductivity testing. Our investigations demonstrate the great potential of this polymer material in the field of optoelectronics.

| S-EPMC10819643 | biostudies-literature

High Performance Solution Processed Organic Field Effect Transistors with Novel Diketopyrrolopyrrole-Containing Small Molecules.

Project description:The donor-acceptor (D-A)-type diketopyrrolopyrrole (DPP)-based small molecules (LGC-D117 and LGC-D118) were synthesized and used as the active layer of solution-processable organic field-effect transistors (OFETs). Both LGC-D117 and LGC-D118 contain silaindacenodithiophene as electron-donor units with DPP as an electron-accepting linker, and octylrhodanine as the electron-accepting end group. The molecules were functionalized with different side chains to study their effects on OFET characteristics. LGC-D117 has a simple branched alkyl side chain, whereas LGC-D118 features a bulky siloxane-terminated hybrid alkyl chain. The siloxane side chains of LGC-D118 account for its better crystallinity, leading to significantly high field-effect mobility (max 3.04 cm2 V-1 s-1). In particular, LGC-D118 is well soluble and sustains the high mobility in the environmentally friendly 2-methyltetrahydrofuran solvent with low temperature annealing at 100 °C due to the bulky siloxane-terminated alkyl side chain.

| S-EPMC5427974 | biostudies-literature

Comparative analyses of new donor-π-acceptor ferrocenyl-chalcones containing fluoro and methoxy-fluoro acceptor units as synthesized dyes for organic solar cell material.

Project description:Two organometallic compounds known as (E)-1-ferrocenyl-(3-fluorophenyl)prop-2-en-1-one (Fc1) and (E)-1-ferrocenyl-(3-fluoro-4-methoxyphenyl)prop-2-en-1-one (Fc2) are designed and synthesized for application in dye-sensitized solar cell (DSSC) based on a donor-π-acceptor (D-π-A) architecture. By strategically introducing a methoxy group into the acceptor side of the compound, Fc2 which has adopted a D-π-A-AD structure are compared with the basic D-π-A structure of Fc1. Both compounds were characterized by utilizing the IR, NMR and UV-Vis methods. Target compounds were further investigated by X-ray analysis and studied computationally using Density Functional Theory (DFT) and Time-Dependent DFT (TD-DFT) approaches to explore their potential performances in DSSCs. An additional methoxy group has been proven in enhancing intramolecular charge transfer (ICT) by improving the planarity of Fc2 backbone. This good electronic communication leads to higher HOMO energy level, larger dipole moment and better short-circuit current density (Jsc) values. Eventually, the presence of methoxy group in Fc2 has improved the conversion efficiency as in comparison to Fc1 under the same conditions.

| S-EPMC7641456 | biostudies-literature

Ultra-flexible nonvolatile memory based on donor-acceptor diketopyrrolopyrrole polymer blends.

Project description:Flexible memory cell array based on high mobility donor-acceptor diketopyrrolopyrrole polymer has been demonstrated. The memory cell exhibits low read voltage, high cell-to-cell uniformity and good mechanical flexibility, and has reliable retention and endurance memory performance. The electrical properties of the memory devices are systematically investigated and modeled. Our results suggest that the polymer blends provide an important step towards high-density flexible nonvolatile memory devices.

| S-EPMC4450595 | biostudies-literature

Fluorene-Based Donor-Acceptor Copolymers Containing Functionalized Benzotriazole Units: Tunable Emission and their Electrical Properties.

Project description:Monomers 4,7-dibromo-2H-benzo[d]1,2,3-triazole (m1) and 4,7-(bis(4-bromophenyl)ethynyl)-2H-benzo[d]1,2,3-triazole (m2) have been synthesized in good yields using different procedures. Monomers m1 and m2 have been employed for building new copolymers of fluorene derivatives by a Suzuki reaction under microwave irradiation using the same conditions. In each case different chain lengths have been achieved, while m1 gives rise to polymers for m2 oligomers have been obtained (with a number of monomer units lower than 7). Special interest has been paid to their photophysical properties due to excited state properties of these D-A units alternates, which have been investigated by density functional theory (DFT) calculations using two methods: (i) An oligomer approach and (ii) by periodic boundary conditions (PBC). It is highly remarkable the tunability of the photophysical properties as a function of the different monomer functionalization derived from 2H-benzo[d]1,2,3-triazole units. In fact, a strong modulation of the absorption and emission properties have been found by functionalizing the nitrogen N-2 of the benzotriazole units or by elongation of the π-conjugated core with the introduction of alkynylphenyl groups. Furthermore, the charge transport properties of these newly synthesized macromolecules have been approached by their implementation in organic field-effect transistors (OFETs) in order to assess their potential as active materials in organic optoelectronics.

| S-EPMC7077272 | biostudies-literature

Synthesis and characterization of novel donor-acceptor type electrochromic polymers containing diketopyrrolopyrrole as an acceptor and propylenedioxythiophene or indacenodithiophene as a donor.

Project description:A range of low band gap donor-acceptor conjugated polymers (P1-P3) with backbones composed of diketopyrrolopyrrole (DPP), propylenedioxythiophene (ProDOT) and indacenodithiophene (IDT) units were designed and synthesized using the Stille coupling reaction. The optical, electrochemical and electrochromic properties of the resultant polymers were thoroughly characterized. These polymers showed exceptional solubility in common organic solvents and displayed thermal stability at a high temperature. The optical and electrochemical measurements revealed slight variations in the maximum absorptions and oxidation peaks depending on the intrinsic D-A ratio in each polymer, and narrow band gaps lower than 1.60 eV were found for these polymers. Upon oxidation, the polymer films exhibit distinct color changes (pale violet-red to dark gray for P1, rosy brown to silver for P2, atrovirens to light grey for P3) in the VIS and NIR regions. Moreover, the electrochromic switching studies indicated that these polymers have favorable switching properties, such as rapid response speed and high optical contrast and coloration efficiency, and are outstanding candidates for electrochromic applications.

| S-EPMC9081592 | biostudies-literature

D-π-A-π-D Structured Diketopyrrolopyrrole-Based Electron Donors for Solution-Processed Organic Solar Cells.

Project description:Solution-processable D-π-A-π-D structured two organic small molecules bearing thienyl diketopyrrolopyrrole (TDPP) and furanyl diketopyrrolopyrrole (FDPP) as central acceptor units and cyano on the π-bridge and phenothiazine as the terminal donor units, coded as TDPP-PTCN and FDPP-PTCN, are designed and synthesized. The C-H arylation and Suzuki coupling protocols have been adopted for synthesizing the molecules. Solution-processed organic solar cells (OSCs) were constructed with these molecules as the donors and phenyl-C71-butyric acid methyl ester as the acceptor yielding power conversion efficiencies (PCE) of 4.0% for FDPP-PTCN and 5.2% for TDPP-PTCN, which is the highest PCE reported so far from the small molecular DPP-phenothiazine-based architecture for solution-based OSCs. The effect of heteroatom substitution on thermal stability and optoelectronic and photovoltaic performances is also systematically investigated herein. This work demonstrates that replacement of oxygen with sulfur in these kinds of small molecules remarkably improves the photovoltaic performance of OSCs.

| S-EPMC6645040 | biostudies-literature

D-A-D structured organic molecules with diketopyrrolopyrrole acceptor unit for solution-processed organic solar cells.

Project description:Four solution-processable D-A-D structured organic molecules with diketopyrrolopyrrole (DPP) as acceptor unit and triphenylamine (TPA) or (4-hexyl)thieno [3,2-b]thiophene (HTT) as donor unit, DPP8-TPA, DPP8-TPA-OR, DPP6-HTT and DPP8-HTT, were designed and synthesized for the application as donor materials in solution-processed organic solar cells (OSCs). The molecules show broad absorption and relatively lower highest occupied molecular orbital energy levels. Photovoltaic properties of the molecules were investigated by fabricating the bulk-heterojunction OSCs with the molecules as donor and PC71BM as acceptor. Power conversion efficiency of the OSC based on DPP8-HTT reached 1.5% under the illumination of AM1.5, 100 mW cm(-2).

| S-EPMC3949361 | biostudies-other

Colorless Near-Infrared Absorbing Dyes Based on B-N Fused Donor-Acceptor-Donor π-Conjugated Molecules for Organic Phototransistors.

Project description:The introduction of a colorless function to organic electronic devices allows responses to light in the near-infrared (NIR) region and is expected to broaden the applications of these devices. However, the development of a colorless NIR dye remains a challenge due to the lack of a rational molecular design for controlling electronic transitions. In this study, to suppress the π-π* transitions in the visible region, polycyclic donor-acceptor-donor π-conjugated molecules with boron bridges (Py-FNTz-B and IP-FNTz-B) are designed and synthesized, which contain pyrrole or indenopyrrole as donor units with fluorinated naphthobisthiadiazole (FNTz) as an acceptor unit. The pyrrole end-capped Py-FNTz-B shows an absorption band in the NIR region without distinct visible-light absorption, which has led to the establishment of colorless characteristics. The indenopyrrole end-capped IP-FNTz-B shows a narrow optical energy gap of 0.87 eV in films. Time-resolved microwave conductance and field-effect transistors demonstrate the semiconducting characteristics of these molecules, and Py-FNTz-B-based devices function as NIR phototransistors. Theoretical analyses indicate that the combination of a polyene-like electronic structure with orbital symmetry is important to obtain NIR wavelength-selective absorption. This study suggests that a molecular design based on electronic structures can be effective in the development of colorless NIR-absorbing dyes for organic electronics.

| S-EPMC11336916 | biostudies-literature

Adjusting Aggregation Modes and Photophysical and Photovoltaic Properties of Diketopyrrolopyrrole-Based Small Molecules by Introducing B←N Bonds.

Project description:The packing mode of small-molecular semiconductors in thin films is an important factor that controls the performance of their optoelectronic devices. Designing and changing the packing mode by molecular engineering is challenging. Three structurally related diketopyrrolopyrrole (DPP)-based compounds were synthesized to study the effect of replacing C-C bonds by isoelectronic dipolar B←N bonds. By replacing one of the bridging C-C bonds on the peripheral fluorene units of the DPP molecules by a coordinative B←N bond and changing the B←N bond orientation, the optical absorption, fluorescence, and excited-state lifetime of the compounds can be tuned. The substitution alters the preferential aggregation of the molecules in the solid state from H-type (for C-C) to J-type (for B←N). Introducing B←N bonds thus provides a subtle way of controlling the packing mode. The photovoltaic properties of the compounds were evaluated in bulk heterojunctions with a fullerene acceptor and showed moderate performance as a consequence of suboptimal morphologies, bimolecular recombination, and triplet-state formation.

| S-EPMC6391975 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data