Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Mixing Oil-Based Microencapsulation of Garlic Essential Oil: Impact of Incorporating Three Commercial Vegetable Oils on the Stability of Emulsions.

ABSTRACT: The active components in garlic essential oil are easily degradable, which limits its application in the food industry. Vegetable oils (VOs) were used to improve the stability of garlic essential oil (GEO) emulsion. The volatile compounds of GEO and its mixtures with vegetable oils (VOs), including corn oil (CO), soybean oil (SO), and olive oil (OO) indicated that GEO-VO mixtures had a higher percentage of Diallyl disulfide and Diallyl trisulfide than pure GEO. Adding an appropriate amount of VOs promoted the GEO emulsion (whey protein concentrate and inulin as the wall materials) stability in order of CO > SO > OO. Evaluation of the encapsulation efficiency, controlled release, and antimicrobial activity of GEO-VO microcapsules showed that the GEO was successfully entrapped and slowly released with active antibacterial activities on both E. coli and S. aureus. Collectively, these results implied that VOs, especially for 20% CO, improved the stability of GEO emulsions and the encapsulation efficiency of GEO microcapsules. The mechanism might be related to (1) the regulating effect of density difference between oil and water phases on prevention to gravitational separation, (2) the promotion to the compatibility of GEO and VOs to inhibit the phase separation caused by Ostwald ripening.

SUBMITTER: Zhao Y

PROVIDER: S-EPMC8305996 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Transcription profiling of Atlantic salmon following dietary substitution of fish oil with vegetable oils

Project description:There is an increasing drive to replace fish oil (FO) in finfish aquaculture diets with vegetable oils (VO), driven by the short supply of FO derived from wild fish stocks. Little is known of the consequences for fish health after such substitution. The effect of dietary VO on hepatic gene expression was determined in Atlantic salmon (Salmo salar) byg a cDNA microarray analysis. Post-smolt farmed salmon were reared for x weeks on diets where the FO component of the feed was replaced with one of three different VOs - rapeseed (RO), soybean (SO) or linseed (LO). RNA from five fish fed on each diet was extracted. A total of 20 cDNA microarray hybridisations - TRAITS / SGP Atlantic salmon 17k feature cDNA microarray - were performed - 4 diets (three VO + FO control) x 5 individuals - using a common pooled reference control design. Data were obtained from 19 of the 20 hybridisations.

2008-10-27 | E-TABM-478 | biostudies-arrayexpress

Response of Macrobrachium rosenbergii to Vegetable Oils Replacing Dietary Fish Oil: Insights From Antioxidant Defense.

Project description:The study was conducted to evaluate the effects of fish oil replacement by vegetable oils on growth performance, histology, and antioxidant capacity of Macrobrachium rosenbergii. Three isonitrogenous and isoenergetic diets were formulated with different lipid sources included. DFO diet contained 6% fish oil, whereas DSO and DRO diets included 6% soybean oil and rapeseed oil (RO) as alternatives for fish oil, respectively. Prawns were fed thrice daily for 8 weeks. The results showed that prawns in DFO group showed significantly lower final weight, weight gain ratio, and specific growth rate (SGR), but higher feed intake and feed coefficient ratio than those in DSO and DRO groups. In hepatocellular ultrastructure, malformed and atrophic nucleus and higher apoptosis ratio were observed in DFO group. In addition, levels of haemolymph proinflammatory cytokines, activities of anti-superoxide anion, inducible-type NO-synthase (iNOS) and content of nitric oxide, and hepatopancreas NF-?B signal pathway gene expression in DFO group increased markedly compared to those of DSO and DRO groups. The results suggested that vegetable oils, such as soybean oil and RO might be the better lipid sources in diets for Macrobrachium rosenbergii than fish oil, it may be attributed to modified oxidative status induced by NF-?B-NO signal pathway.

| S-EPMC7082322 | biostudies-literature

Effects of Endogenous Anti-Oxidative Components from Different Vegetable Oils on Their Oxidative Stability.

Project description:The effects of endogenous anti-oxidative components of ten common edible vegetable oils (palm olein, corn oil, rapeseed oil, soybean oil, perilla seed oil, high oleic sunflower oil, peanut oil, camellia oil, linseed oil, and sesame oil) on oxidation were explored in this research. The oxidation processes and patterns of the oils were investigated with the Schaal oven test using fatty acids and the oxidative stability index, acid value, peroxide value, p-anisidine value, total oxidation value, and content of major endogenous anti-oxidative components as indicators. The major endogenous anti-oxidative components in vegetable oils were tocopherols, sterols, polyphenols, and squalene, among which α-tocopherol, β-sitosterol, and polyphenols showed good anti-oxidative activity. However, squalene and polyphenols were relatively low and showed limited anti-oxidative effects. Moreover, the oxidative stability index of edible vegetable oils oxidized at high temperature (120 °C) was positively correlated with the content of saturated fatty acids (r = 0.659) and negatively correlated with the content of polyunsaturated fatty acids (r = -0.634) and calculated oxidizability (r = -0.696). When oxidized at a low temperature (62 °C), oxidative stability was influenced by a combination of fatty acid composition as well as endogenous anti-oxidative components. An improved TOPSIS based on Mahalanobis distance was used to evaluate the oxidative stability of different types of vegetable oils. Moreover, the oxidative stability of corn oil was better than the other vegetable oils, while perilla seed oil was very weak.

| S-EPMC10252449 | biostudies-literature

Electrostatics at the oil-water interface, stability, and order in emulsions and colloids.

Project description:Oil-water mixtures are ubiquitous in nature and are particularly important in biology and industry. Usually additives are used to prevent the liquid droplets from coalescing. Here, we show that stabilization can also be obtained from electrostatics, because of the well known remarkable properties of water. Preferential ion uptake leads to a tunable droplet charge and surprisingly stable, additive-free, water-in-oil emulsions that can crystallize. For particle-stabilized ("Pickering") emulsions we find that even extremely hydrophobic, nonwetting particles can be strongly bound to (like-charged) oil-water interfaces because of image charge effects. These basic insights are important for emulsion production, encapsulation, and (self-)assembly, as we demonstrate by fabricating a diversity of structures in bulk, on surfaces, and in confined geometries.

| S-EPMC1800788 | biostudies-literature

Improving the Stability of Oil Body Emulsions from Diverse Plant Seeds Using Sodium Alginate.

Project description:In this study, peanut, sesame, and rapeseed oil bodies (OBs) were extracted by the aqueous medium method. The surface protein composition, microstructure, average particle size d 4 ,   3 , ?-potential of the extracted OBs in aqueous emulsion were characterized. The stability of the OB emulsions was investigated. It was found that different OB emulsions contained different types and contents of endogenous and exogenous proteins. Aggregation at low pHs (<6) and creaming at high pHs (7 and 8) both occurred for all of three OB emulsions. Sodium alginate (ALG) was used to solve the instability of OB emulsions under different conditions-low concentration of ALG improved the stability of OB emulsions below and near the isoelectric point of the OBs, through electrostatic interaction. While a high concentration of ALG improved the OB emulsion stability through the viscosity effect at pH 7. The OB emulsions stabilized by ALG were salt-tolerant and freeze-thaw resistant.

| S-EPMC6864775 | biostudies-literature

Stability of oil-in-water emulsions performed by ultrasound power or high-pressure homogenization.

Project description:Emulsifiers are added to enhance product stability to obtain a satisfactory shelf-life. For this reason, stable emulsions that do not form peroxides nor change the fatty acid composition of food, as well as safe treatments to obtain them, are aspects of utmost importance. High-pressure homogenization is a conventional approach to prepare emulsions because of its high efficiency. In addition, the beneficial effects of ultrasound on the processing efficiency are known. Therefore, the impact of high-pressure homogenization (30 MPa, 50M Pa) or ultrasound power (270 W) on the emulsion stability and emulsifying properties of 5% coconut oil-in-water emulsion were discussed in this study. The complexes (3:7and 4:6, by weight) of propylene glycol alginate and xanthan gum were selected as emulsifier. The apparent viscosity, particle size and distribution, emulsifying properties and ζ-potential of 5% coconut oil-in-water emulsion before and after ultrasound treatment or high-pressure homogenization were investigated and compared. The micro structure of the emulsion was observed under the fluorescence microscope. The experimental results showed that both high-pressure homogenization and ultrasonic treatment effectively reduced the apparent viscosity, average droplet size and narrowed the distribution range of the emulsion, compared with the pre-emulsion. However, aggregation in the emulsion appeared only after being subjected to high-pressure homogenization, while the emulsion made by the ultrasound treatment remained stable during 30 days storage. In conclusion, this study provides valuable information regarding emulsion preparation methods that can be feasible in food and beverage industries, demonstrating a better performance of ultrasound in optimizing and extending food shelf-life in food and beverage industries.

| S-EPMC6407764 | biostudies-literature

Simple and rapid quantification of brominated vegetable oil in commercial soft drinks by LC-MS.

Project description:We report here a simple and rapid method for the quantification of brominated vegetable oil (BVO) in soft drinks based upon liquid chromatography-electrospray ionization mass spectrometry. Unlike previously reported methods, this novel method does not require hydrolysis, extraction or derivatization steps, but rather a simple "dilute and shoot" sample preparation. The quantification is conducted by mass spectrometry in selected ion recording mode and a single point standard addition procedure. The method was validated in the range of 5-25?g/mL BVO, encompassing the legal limit of 15?g/mL established by the US FDA for fruit-flavored beverages in the US market. The method was characterized by excellent intra- and inter-assay accuracy (97.3-103.4%) and very low imprecision [0.5-3.6% (RSD)]. The direct nature of the quantification, simplicity, and excellent statistical performance of this methodology constitute clear advantages in relation to previously published methods for the analysis of BVO in soft drinks.

| S-EPMC5009762 | biostudies-literature

Tribological Performance Investigation of a Commercial Engine Oil Incorporating Reduced Graphene Oxide as Additive.

Project description:We investigated the tribological behavior of commercialized, fully synthetic engine oil upon the incorporation of reduced graphene oxide in seven different concentrations between 0.01 and 0.2 wt %. Stability of the prepared samples was assessed by turbidimetry and dynamic light scattering measurements, and their tribological properties through a reciprocating tribometer, using a steel ball on special cut steel blocks. The addition of 0.02 wt % of reduced graphene oxide led to an improvement of the tribological behavior compared to the pristine engine oil, by significantly lowering the friction coefficient by 5% in the boundary lubrication regime. Both the surfaces and the reduced graphene oxide additive were thoroughly characterized by microscopic and optical spectroscopy techniques. We also verified that a protective layer was formed between the worn surfaces, due to the presence of reduced graphene oxide. Carbon accumulation and various additive elements such as Ca, Zn, S and P were detected on the rubbing surfaces of both the ball and the block through energy-dispersive X-ray spectroscopy. Finally, it was shown that the wear scar diameter on the surface of the steel ball was lower by 3%, upon testing the engine oil sample containing reduced graphene oxide at concentration 0.02 wt %, compared to the control sample.

| S-EPMC7913578 | biostudies-literature

Thermally Reversible Polymeric Networks from Vegetable Oils.

Project description:Low cross-link density thermally reversible networks were successfully synthesized from jatropha and sunflower oils. The oils were epoxidized and subsequently reacted with furfurylamine to attach furan groups onto the triglycerides, preferably at the epoxide sites rather than at the ester ones. Under the same reaction conditions, the modified jatropha oil retained the triglyceride structure more efficiently than its sunflower-based counterpart, i.e., the ester aminolysis reaction was less relevant for the jatropha oil. These furan-modified oils were then reacted with mixtures of aliphatic and aromatic bismaleimides, viz. 1,12-bismaleimido dodecane and 1,1'-(methylenedi-4,1-phenylene)bismaleimide, resulting in a series of polymers with Tg ranging between 3.6 and 19.8 °C. Changes in the chemical structure and mechanical properties during recurrent thermal cycles suggested that the Diels-Alder and retro-Diels-Alder reactions occurred. However, the reversibility was reduced over the thermal cycles due to several possible causes. There are indications that the maleimide groups were homopolymerized and the Diels-Alder adducts were aromatized, leading to irreversibly cross-linked polymers. Two of the polymers were successfully applied as adhesives without modifications. This result demonstrates one of the potential applications of these polymers.

| S-EPMC7465172 | biostudies-literature

Mass Spectrometric Characterization of Epoxidized Vegetable Oils.

Project description:Matrix-assisted laser desorption ionization and electrospray ionization mass spectrometry (MALDI-MS and ESI-MS) were used for the characterization of epoxidized soybean and linseed oils, which are important raw materials in the biopolymer production. The recently invented data mining approach, mass-remainder analysis (MARA), was implemented for the analysis of these types of complex natural systems. Different epoxidized triglyceride mass spectral peak series were identified, and the number of carbon atoms and epoxide groups was determined. The fragmentation mechanisms of the epoxidized triglyceride (ETG) adducts formed with different cations (such as H⁺, Na⁺, Li⁺, and NH₄⁺) were explored. As a novel approach, the evaluation of the clear fragmentation pathways of the sodiated ETG adducts enabled the estimation of the epoxidized fatty acid compositions of these types of oils by MS/MS.

| S-EPMC6473735 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data