Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Folded Heterogeneous Silicon and Lithium Niobate Mach-Zehnder Modulators with Low Drive Voltage.

ABSTRACT: Optical modulators were, are, and will continue to be the underpinning devices for optical transceivers at all levels of the optical networks. Recently, heterogeneously integrated silicon and lithium niobate (Si/LN) optical modulators have demonstrated attractive overall performance in terms of optical loss, drive voltage, and modulation bandwidth. However, due to the moderate Pockels coefficient of lithium niobate, the device length of the Si/LN modulator is still relatively long for low-drive-voltage operation. Here, we report a folded Si/LN Mach-Zehnder modulator consisting of meandering optical waveguides and meandering microwave transmission lines, whose device length is approximately two-fifths of the unfolded counterpart while maintaining the overall performance. The present devices feature a low half-wave voltage of 1.24 V, support data rates up to 128 gigabits per second, and show a device length of less than 9 mm.

SUBMITTER: Sun S

PROVIDER: S-EPMC8307437 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Silicon-Organic Hybrid (SOH) Mach-Zehnder Modulators for 100 Gbit/s on-off Keying.

Project description:Electro-optic modulators for high-speed on-off keying (OOK) are key components of short- and medium-reach interconnects in data-center networks. Small footprint, cost-efficient large-scale production, small drive voltages and ultra-low power consumption are of paramount importance for such devices. Here we demonstrate that the concept of silicon-organic hybrid (SOH) integration perfectly meets these challenges. The approach combines the unique processing advantages of large-scale silicon photonics with unrivalled electro-optic (EO) coefficients obtained by molecular engineering of organic materials. Our proof-of-concept experiments demonstrate generation and transmission of OOK signals at line rates of up to 100 Gbit/s using a 1.1?mm-long SOH Mach-Zehnder modulator (MZM) featuring a ?-voltage of only 0.9?V. The experiment represents the first demonstration of 100 Gbit/s OOK on the silicon photonic platform, featuring the lowest drive voltage and energy consumption ever demonstrated for a semiconductor-based device at this data rate. We support our results by a theoretical analysis showing that the nonlinear transfer characteristic of the MZM can help to overcome bandwidth limitations of the modulator and the electric driver circuitry. We expect that high-speed, power-efficient SOH modulators may have transformative impact on short-reach networks, enabling compact transceivers with unprecedented efficiency, thus building the base of future interfaces with Tbit/s data rates.

| S-EPMC5883022 | biostudies-literature

High-sensitivity optical to microwave comparison with dual-output Mach-Zehnder modulators.

Project description:We demonstrate the use of two dual-output Mach-Zehnder modulators (DO-MZMs) in a direct comparison between a femtosecond (fs) pulse train and a microwave signal. Through balanced detection, the amplitude-to-phase modulation (AM-PM) conversion effect is suppressed by more than 40?dB. A cross-spectrum technique enables us to achieve a high-sensitivity phase noise measurement (-186 dBc/Hz above 10-kHz offset), which corresponds to the thermal noise of a +9?dBm carrier. This method is applied to compare a 1-GHz fs monolithic laser to a 1-GHz microwave signal generated from photodetection of a free-running 500?MHz mode-locked laser. The measured phase noise is -160 dBc/Hz at 4-kHz, -167 dBc/Hz at 10-kHz, and -180 dBc/Hz at offset frequencies above 100-kHz. The measurement is limited by the free-running 500-MHz laser's noise, the flicker noise of the modified uni-traveling carrier photodiode and the thermal noise floor, not by the method itself. This method also has the potential to achieve a similar noise floor even at higher carrier frequencies.

| S-EPMC5847530 | biostudies-literature

High-performance silicon photonic tri-state switch based on balanced nested Mach-Zehnder interferometer.

Project description:ABSATRCT:This work proposes a novel silicon photonic tri-state (cross/bar/blocking) switch, featuring high-speed switching, broadband operation, and crosstalk-free performance. The switch is designed based on a 2?×?2 balanced nested Mach-Zehnder interferometer structure with carrier injection phase tuning. As compared to silicon photonic dual-state (cross/bar) switches based on Mach-Zehnder interferometers with carrier injection phase tuning, the proposed switch not only has better performance in cross/bar switching but also provides an extra blocking state. The unique blocking state has a great advantage in applications of N?×?N switch fabrics, where idle switching elements in the fabrics can be configured to the blocking state for crosstalk suppression. According to our numerical experiments on a fully loaded 8?×?8 dilated Banyan switch fabric, the worst output crosstalk of the 8?×?8 switch can be dramatically suppressed by more than 50?dB, by assigning the blocking state to idle switching elements in the fabric. The results of this work can extend the functionality of silicon photonic switches and significantly improve the performance of on-chip N?×?N photonic switching technologies.

| S-EPMC5612950 | biostudies-literature

Ultrasensitive Gas Refractometer Using Capillary-Based Mach-Zehnder Interferometer.

Project description:In this paper, we report a capillary-based Mach-Zehnder (M-Z) interferometer that could be used for precise detection of variations in refractive indices of gaseous samples. The sensing mechanism is quite straightforward. Cladding and core modes of a capillary are simultaneously excited by coupling coherent laser beams to the capillary cladding and core, respectively. An interferogram would be generated as the light transmitted from the core interferes with the light transmitted from the cladding. Variations in the refractive index of the air filling the core lead to variations in the phase difference between the core and cladding modes, thus shifting the interference fringes. Using a photodiode together with a narrow slit, we could interrogate the fringe shifts. The resolution of the sensor was found to be ~5.7 × 10-8 RIU (refractive index unit), which is comparable to the highest resolution obtained by other interferometric sensors reported in previous studies. Finally, we also analyze the temperature cross sensitivity of the sensor. The main goal of this paper is to demonstrate that the ultra-sensitive sensing of gas refractive index could be realized by simply using a single capillary fiber rather than some complex fiber-optic devices such as photonic crystal fibers or other fiber-optic devices fabricated via tricky fiber processing techniques. This capillary sensor, while featuring an ultrahigh resolution, has many other advantages such as simple structure, ease of fabrication, straightforward sensing principle, and low cost.

| S-EPMC7070851 | biostudies-literature

Lightwave Circuits in Lithium Niobate through Hybrid Waveguides with Silicon Photonics.

Project description:We demonstrate a photonic waveguide technology based on a two-material core, in which light is controllably and repeatedly transferred back and forth between sub-micron thickness crystalline layers of Si and LN bonded to one another, where the former is patterned and the latter is not. In this way, the foundry-based wafer-scale fabrication technology for silicon photonics can be leveraged to form lithium-niobate based integrated optical devices. Using two different guided modes and an adiabatic mode transition between them, we demonstrate a set of building blocks such as waveguides, bends, and couplers which can be used to route light underneath an unpatterned slab of LN, as well as outside the LN-bonded region, thus enabling complex and compact lightwave circuits in LN alongside Si photonics with fabrication ease and low cost.

| S-EPMC4772107 | biostudies-literature

Photonic-assisted microwave signal multiplication and modulation using a silicon Mach-Zehnder modulator.

Project description:Photonic generation of microwave signal is obviously attractive for many prominent advantages, such as large bandwidth, low loss, and immunity to electromagnetic interference. Based on a single integrated silicon Mach-Zehnder modulator (MZM), we propose and experimentally demonstrate a simple and compact photonic scheme to enable frequency-multiplicated microwave signal. Using the fabricated integrated MZM, we also demonstrate the feasibility of microwave amplitude-shift keying (ASK) modulation based on integrated photonic approach. In proof-of-concept experiments, 2-GHz frequency-doubled microwave signal is generated using a 1-GHz driving signal. 750-MHz/1-GHz frequency-tripled/quadrupled microwave signals are obtained with a driving signal of 250 MHz. In addition, a 50-Mb/s binary amplitude coded 1-GHz microwave signal is also successfully generated.

| S-EPMC4735760 | biostudies-other

High-performance coherent optical modulators based on thin-film lithium niobate platform.

Project description:The coherent transmission technology using digital signal processing and advanced modulation formats, is bringing networks closer to the theoretical capacity limit of optical fibres, the Shannon limit. The in-phase/quadrature electro-optic modulator that encodes information on both the amplitude and the phase of light, is one of the underpinning devices for the coherent transmission technology. Ideally, such modulator should feature a low loss, low drive voltage, large bandwidth, low chirp and compact footprint. However, these requirements have been only met on separate occasions. Here, we demonstrate integrated thin-film lithium niobate in-phase/quadrature modulators that fulfil these requirements simultaneously. The presented devices exhibit greatly improved overall performance (half-wave voltage, bandwidth and optical loss) over traditional lithium niobate counterparts, and support modulation data rate up to 320 Gbit s-1. Our devices pave new routes for future high-speed, energy-efficient, and cost-effective communication networks.

| S-EPMC7411015 | biostudies-literature

Heterogeneously integrated ITO plasmonic Mach-Zehnder interferometric modulator on SOI.

Project description:Densely integrated active photonics is key for next generation on-chip networks for addressing both footprint and energy budget concerns. However, the weak light-matter interaction in traditional active Silicon optoelectronics mandates rather sizable device lengths. The ideal active material choice should avail high index modulation while being easily integrated into Silicon photonics platforms. Indium tin oxide (ITO) offers such functionalities and has shown promising modulation capacity recently. Interestingly, the nanometer-thin unity-strong index modulation of ITO synergistically combines the high group-index in hybrid plasmonic with nanoscale optical modes. Following this design paradigm, here, we demonstrate a spectrally broadband, GHz-fast Mach-Zehnder interferometric modulator, exhibiting a high efficiency signified by a miniscule VπL of 95 V μm, deploying a one-micrometer compact electrostatically tunable plasmonic phase-shifter, based on heterogeneously integrated ITO thin films into silicon photonics. Furthermore we show, that this device paradigm enables spectrally broadband operation across the entire telecommunication near infrared C-band. Such sub-wavelength short efficient and fast modulators monolithically integrated into Silicon platform open up new possibilities for high-density photonic circuitry, which is critical for high interconnect density of photonic neural networks or applications in GHz-fast optical phased-arrays, for example.

| S-EPMC7809469 | biostudies-literature

Hybrid Integration of Silicon Photonic Devices on Lithium Niobate for Optomechanical Wavelength Conversion.

Project description:The rapid development of quantum information processors has accelerated the demand for technologies that enable quantum networking. One promising approach uses mechanical resonators as an intermediary between microwave and optical fields. Signals from a superconducting, topological, or spin qubit processor can then be converted coherently to optical states at telecom wavelengths. However, current devices built from homogeneous structures suffer from added noise and a small conversion efficiency. Combining advantageous properties of different materials into a heterogeneous design should allow for superior quantum transduction devices-so far these hybrid approaches have however been hampered by complex fabrication procedures. Here we present a novel integration method, based on previous pick-and-place ideas, that can combine independently fabricated device components of different materials into a single device. The method allows for a precision alignment by continuous optical monitoring during the process. Using our method, we assemble a hybrid silicon-lithium niobate device with state-of-the-art wavelength conversion characteristics.

| S-EPMC7809686 | biostudies-literature

All-optical phase modulation in a cavity-polariton Mach-Zehnder interferometer.

Project description:Quantum fluids based on light is a highly developing research field, since they provide a nonlinear platform for developing optical functionalities and quantum simulators. An important issue in this context is the ability to coherently control the properties of the fluid. Here we propose an all-optical approach for controlling the phase of a flow of cavity-polaritons, making use of their strong interactions with localized excitons. Here we illustrate the potential of this method by implementing a compact exciton-polariton interferometer, which output intensity and polarization can be optically controlled. This interferometer is cascadable with already reported polariton devices and is promising for future polaritonic quantum optic experiments. Complex phase patterns could be also engineered using this optical method, providing a key tool to build photonic artificial gauge fields.

| S-EPMC3926000 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data