Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Phosphate Adsorption from Aqueous Solution Using Electrospun Cellulose Acetate Nanofiber Membrane Modified with Graphene Oxide/Sodium Dodecyl Sulphate.

ABSTRACT: Eutrophication and water pollution caused by a high concentration of phosphate are two concerning issues that affect water quality worldwide. A novel cellulose-based adsorbent, cellulose acetate/graphene oxide/sodium dodecyl sulphate (CA/GO/SDS), was developed for water treatment. A 13% CA solution in a mixture of acetone:dimethylacetamide (2:1) has been electrospun and complexed with a GO/SDS solution. The field emission scanning electron microscope (FESEM) showed that the CA membrane was pure white, while the CA/GO/SDS membrane was not as white as CA and its colour became darker as the GO content increased. The process of phosphate removal from the solutions was found to be aided by the hydroxyl groups on the surface of the CA modified with GO/SDS, as shown by infrared spectroscopy. An optimization condition for the adsorption process was studied by varying pH, immersion time, and the mass of the membrane. The experimental results from phosphate adsorption showed that CA/GO/SDS had an excellent pH adaptability, with an optimum pH of 7, and maximum removal (>87.0%) was observed with a membrane mass of 0.05 g at an initial concentration of 25 mg L^-1. A kinetic study revealed that 180 min of contact time could adsorb about 87.2% of phosphate onto the CA/GO/SDS membrane. A typical pseudo-second-order kinetic model successfully portrayed the kinetic sorption of phosphate, and the adsorption equilibrium data were well-correlated with the Langmuir adsorption model, suggesting the monolayer coverage of adsorbed molecules.

SUBMITTER: Amin NAAM

PROVIDER: S-EPMC8307572 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Effect of Solution Miscibility on the Morphology of Coaxial Electrospun Cellulose Acetate Nanofibers.

Project description:Coaxial electrospinning (co-electrospinning) technique has greatly expanded the universality of fabricating core-shell polymer nanofibers. However, the effect of solution miscibility on the morphology of co-electrospun products remains unclear. Herein, different cellulose acetate (CA) solutions with high solution miscibility but distinctly different electrospinnability were used to survey the effect of solution miscibility on the co-electrospinning process. The structural characterizations show that co-electrospun products are composed of nanofibers with and without the core-shell structure. This indicates that partial solution mixing occurred during the co-electrospinning process instead of absolute no-mixing or complete mixing. Importantly, the solution miscibility also shows a significant influence on the product morphology. In particular, the transformation from nanofibers to microparticles was realized with the increase of core-to-shell flow ratio during the co-electrospinning of core electrosprayable CA/dimethylacetamide (DMAc) solution and shell electrospinnable CA/acetone-DMAc (2/1, v/v) solution. Results show that the solution miscibility exerts a significant effect on not only the formation of core-shell structure but also the product morphology. This work provides a new insight for the in-depth understanding of the co-electrospinning process.

| S-EPMC8707229 | biostudies-literature

Preparation, characterization, and in vitro diffusion study of nonwoven electrospun nanofiber of curcumin-loaded cellulose acetate phthalate polymer.

Project description:Novel curcumin (CUR)-loaded cellulose acetate phthalate (CAP) nonwoven electrospun nanofiber (NF) transdermal mat was developed and evaluated for its in vitro CUR diffusion properties. Various CAP solutions from 5 to 20 wt% were tested; 17.5 wt% was found to be a suitable concentration for NF fabrication without defects, such as bubble or ribbon structures. The selected wt% CAP solution was loaded with CUR and electrospun into NFs. The prepared CUR-loaded NFs were characterized using scanning electron microscopy, X-ray diffraction, ultraviolet-visible spectroscopy, thermogravimetric analysis (TGA), and in vitro diffusion studies. The as-prepared fibers demonstrated controlled in vitro transdermal delivery of CUR for up to 24 h.

| S-EPMC5605889 | biostudies-other

Efficient Adsorption on Benzoyl and Stearoyl Cellulose to Remove Phenanthrene and Pyrene from Aqueous Solution.

Project description:Benzoyl and stearoyl acid grafted cellulose were synthesized by a simple chemical grafting method. Using these as chemical adsorbents, polycyclic aromatic hydrocarbons (PAHs), like pyrene and phenanthrene, were effectively removed from aqueous solution. The structural and morphological properties of the synthesized adsorbents were determined through X-ray diffraction analysis (XRD), thermal gravimetric analysis (TGA), Fourier transform infrared (FT-IR), FE-SEM, and NMR analyses. Through this method, it was confirmed that benzoyl and stearoyl acid were successfully grafted onto the surface of cellulose. The 5 mg of stearoyl grafted cellulose (St⁻Cell) remove 96.94% pyrene and 97.61% phenanthrene as compared to unmodified cellulose, which adsorbed 1.46% pyrene and 2.99% phenanthrene from 0.08 ppm pyrene and 0.8 ppm phenanthrene aqueous solution, suggesting that those results show a very efficient adsorption performance as compared to the unmodified cellulose.

| S-EPMC6403814 | biostudies-literature

Adsorption of Heavy Metals by Graphene Oxide/Cellulose Hydrogel Prepared from NaOH/Urea Aqueous Solution.

Project description:By taking advantage of cellulose, graphene oxide (GO), and the process for crosslinking using epichlorohydrin (ECH), we propose a simple and novel method to prepare GO/cellulose hydrogel with good potential to adsorb metal ions. GO nanosheets containing carboxyl and hydroxyl groups were introduced into the surface of the cellulose hydrogel with retention of the gel structure and its nanoporous property. Due to the introduction of GO, the GO/cellulose composite hydrogels exhibited good compressive strength. Adsorption capacity of Cu2+ significantly increases with an increase in the GO/cellulose ratio and GO/cellulose hydrogel showed high adsorption rates. The calculated adsorption capacities at equilibrium ( q e cal ) for GO/cellulose hydrogel (GO:cellulose = 20:100 in weight) was up to 94.34 mg·g-1, which was much higher than that of the pristine cellulose hydrogels. Furthermore, GO/cellulose hydrogel exhibited high efficient regeneration and metal ion recovery, and high adsorption capacity for Zn2+, Fe3+, and Pb2+.

| S-EPMC5456948 | biostudies-other

Study on adsorption of phosphate from aqueous solution by zirconium modified coal gasification coarse slag.

Project description:Zr-modified materials have an adsorption affinity for phosphate ions, but because of the cost of carrier materials, they are difficult to apply on a large scale. Herein, coal gasification coarse slag (CGCS) was used as a carrier material and modified with Zr, and its dephosphorization performance was studied. A series of adsorbents with different CGCS/ZrOCl2·8H2O mass ratios were prepared, from which the adsorbent with a CGCS/ZrOCl2·8H2O mass ratio of 5 : 4 (denoted as CGCS-Zr4) was identified as the most promising for phosphate adsorption. The specific surface area of CGCS-Zr4 was much greater than that of raw CGCS (100.12 vs. 12.43 m2 g-1). CGCS-Zr4 showed good adsorption selectivity towards phosphate when competitive anions co-existed, and exhibited good reusability; the adsorption capacity in the fourth adsorption-desorption cycle remained above 11.98 mg g-1. The adsorbent was also suitable for the continuous treatment of up to 830 and 743 bed volumes of synthesised and actual wastewater, respectively. The results of Fourier-transform infrared and X-ray photoelectron spectroscopy indicated that CGCS not only plays the role of a carrier, but also that Ca and Al in CGCS play an important role in phosphate adsorption. Compared with other carrier materials such as biochar and synthetic zeolite, CGCS has the advantages of a large stockpile, low cost, and easy availability. In addition, the preparation of CGCS-Zr4 is simpler and more energy-saving. Zr-modified CGCS is a promising dephosphorization material.

| S-EPMC9179347 | biostudies-literature

Cellulose nanocrystals/graphene oxide composite for the adsorption and removal of levofloxacin hydrochloride antibiotic from aqueous solution.

Project description:Residual antibiotics in water are often persistent organic pollutants. The purpose of this study was to prepare a cellulose nanocrystals/graphene oxide composite (CNCs-GO) with a three-dimensional structure for the removal of the antibiotic levofloxacin hydrochloride (Levo-HCl) in water by adsorption. The scanning electron microscope, Fourier transform infrared (FT-IR), energy-dispersive spectroscopy, X-ray photoelectron spectroscopy and other characterization methods were used to study the physical structure and chemical properties of the CNCs-GO. The three-dimensional structure of the composite material rendered a high surface area and electrostatic attraction, resulting in increased adsorption capacity of the CNCs-GO for Levo-HCl. Based on the Box-Behnken design, the effects of different factors on the removal of Levo-HCl by the CNCs-GO were explored. The composite material exhibited good antibiotic adsorption capacity, with a removal percentage exceeding 80.1% at an optimal pH of 4, the adsorbent dosage of 1.0 g l-1, initial pollutant concentration of 10.0 mg l-1 and contact time of 4 h. The adsorption isotherm was well fitted by the Sips model, and kinetics studies demonstrated that the adsorption process conformed to a quasi-second-order kinetics model. Consequently, the as-synthesized CNCs-GO demonstrates good potential for the effective removal of antibiotics such as levofloxacin hydrochloride from aqueous media.

| S-EPMC7657919 | biostudies-literature

Bioactive Cellulose Acetate Electrospun Mats as Scaffolds for Bone Tissue Regeneration.

Project description:In the last decades, cell-based approaches for bone tissue engineering (BTE) have relied on using models that cannot replicate the complexity of the bone microenvironment. There is an ongoing amount of research on scaffold development responding to the need for feasible materials that can mimic the bone extracellular matrix (ECM) and aid bone tissue regeneration (BTR). In this work, a porous cellulose acetate (CA) fiber mat was developed using the electrospinning technique and the mats were chemically modified to bioactivate their surface and promote osteoconduction and osteoinduction. The mats were characterized using FTIR and SEM/EDS to validate the chemical modifications and assess their structural integrity. By coupling adhesive peptides KRSR, RGD, and growth factor BMP-2, the fiber mats were bioactivated, and their induced biological responses were evaluated by employing immunocytochemical (ICC) techniques to study the adhesion, proliferation, and differentiation of premature osteoblast cells (hFOB 1.19). The biological assessment revealed that at short culturing periods of 48 hours and 7 days, the presence of the peptides was significant for proliferation and adhesion, whereas at longer culture times of 14 days, it had no significant effect on differentiation and maturation of the osteogenic progenitor cells. Based on the obtained results, it is thus concluded that the CA porous fiber mats provide a promising surface morphology that is both biocompatible and can be rendered bioactive upon the addition of osteogenic peptides to favor osteoconduction leading to new tissue formation.

| S-EPMC8837436 | biostudies-literature

Core-Shell Structured Magnetic Carboxymethyl Cellulose-Based Hydrogel Nanosorbents for Effective Adsorption of Methylene Blue from Aqueous Solution.

Project description:This article reports effective removal of methylene blue (MB) dyes from aqueous solutions using a novel magnetic polymer nanocomposite. The core-shell structured nanosorbents was fabricated via coating Fe3O4 nanoparticles with a layer of hydrogel material, that synthesized by carboxymethyl cellulose cross-linked with poly(acrylic acid-co-acrylamide). Some physico-chemical properties of the nanosorbents were characterized by various testing methods. The nanosorbent could be easily separated from aqueous solutions by an external magnetic field and the mass fraction of outer hydrogel shell was 20.3 wt%. The adsorption performance was investigated as the effects of solution pH, adsorbent content, initial dye concentration, and contact time. The maximum adsorption capacity was obtained at neutral pH of 7 with a sorbent dose of 1.5 g L-1. The experimental data of MB adsorption were fit to Langmuir isotherm model and Pseudo-second-order kinetic model with maximum adsorption of 34.3 mg g-1. XPS technique was applied to study the mechanism of adsorption, electrostatic attraction and physically adsorption may control the adsorption behavior of the composite nanosorbents. In addition, a good reusability of 83.5% MB recovering with adsorption capacity decreasing by 16.5% over five cycles of sorption/desorption was observed.

| S-EPMC8466880 | biostudies-literature

A Review on Adsorption of Fluoride from Aqueous Solution.

Project description:Fluoride is one of the anionic contaminants which is found in excess in surface or groundwater because of geochemical reactions or anthropogenic activities such as the disposal of industrial wastewaters. Among various methods used for defluoridation of water such as coagulation, precipitation, membrane processes, electrolytic treatment, ion-exchange, the adsorption process is widely used. It offers satisfactory results and seems to be a more attractive method for the removal of fluoride in terms of cost, simplicity of design and operation. Various conventional and non-conventional adsorbents have been assessed for the removal of fluoride from water. In this review, a list of various adsorbents (oxides and hydroxides, biosorbents, geomaterials, carbonaceous materials and industrial products and by-products) and its modifications from literature are surveyed and their adsorption capacities under various conditions are compared. The effect of other impurities on fluoride removal has also been discussed. This survey showed that various adsorbents, especially binary and trimetal oxides and hydroxides, have good potential for the fluoride removal from aquatic environments.

| S-EPMC5456123 | biostudies-other

Elongated Rodlike Particle Formation of Methyl Cellulose in Aqueous Solution.

Project description:The conformation and structure of methyl cellulose (MC) ether samples dissolved in pure water under dilute conditions were carefully reconsidered based on the results obtained using small-to-wide-angle neutron scattering (S-WANS), static light scattering (SLS), dynamic light scattering (DLS), and viscometric techniques. The examined MC samples possessed an average degree of substitution by methyl groups per glucose unit of ca 1.8 and weight average molar masses (M w), ranging from 23 to 790 kg mol-1. S-WANS experiments clearly demonstrated that the samples possess highly elongated rigid rodlike local structures in deuterium oxide solutions with weak periodicities of ca 0.4 and 1.0 nm on a length scale, which correspond to the average intermolecular distance between molecular chain portions facing each other in the formed rodlike structure and the repeating length of the monomeric cellobiose unit of molecular chains, respectively. Ratios of the particle length (L) to the radius of gyration (R g) determined by SLS techniques approximately showed the relationship LR g -1 = holding in rigid rods over the entire M w range examined in this study. However, the folding number, defined as the ratio of the average molecular contour length (l) to L, remained at the value of lL -1 ∼ 2, representing an elongated one-folded hairpin structure, until M w ∼ 300 kg mol-1 and increased substantially up to ca 4.9 at the highest M w of 790 kg mol-1. The observed increase in the lL -1 value corresponded well with an increase in the diameter of the formed rod with increasing M w observed in the S-WANS data. The M w dependencies of the translational diffusion coefficient determined via DLS measurements and that of the intrinsic viscosity detected via viscometric techniques also distinctly demonstrated that particles formed by the MC samples dissolved in aqueous solution behave as elongated rigid rods irrespective of M w.

| S-EPMC9404515 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data