MoS2 with Stable Photoluminescence Enhancement under Stretching via Plasmonic Surface Lattice Resonance.
Ontology highlight
ABSTRACT:
SUBMITTER: Chiang YJ
PROVIDER: S-EPMC8307818 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The 2-D transition metal dichalcogenide (TMD) semiconductors, has received great attention due to its excellent optical and electronic properties and potential applications in field-effect transistors, light emitting and sensing devices. Recently surface plasmon enhanced photoluminescence (PL) of the weak 2-D TMD atomic layers was developed to realize the potential optoelectronic devices. However, we noticed that the enhancement would not increase monotonically with increasing of metal plasmonic objects and the emission drop after the certain coverage. This study presents the optimized PL enhancement of a monolayer MoS2 in the presence of gold (Au) nanorods. A localized surface plasmon wave of Au nanorods that generated around the monolayer MoS2 can provide resonance wavelength overlapping with that of the MoS2 gain spectrum. These spatial and spectral overlapping between the localized surface plasmon polariton waves and that from MoS2 emission drastically enhanced the light emission from the MoS2 monolayer. We gave a simple model and physical interpretations to explain the phenomena. The plasmonic Au nanostructures approach provides a valuable avenue to enhancing the emitting efficiency of the 2-D nano-materials and their devices for the future optoelectronic devices and systems.
| S-EPMC4647184 | biostudies-literature
Project description:Impressive properties arise from the atomically thin nature of transition metal dichalcogenide two-dimensional materials. However, being atomically thin limits their optical absorption or emission. Hence, enhancing their photoluminescence by plasmonic nanostructures is critical for integrating these materials in optoelectronic and photonic devices. Typical photoluminescence enhancement from transition metal dichalcogenides is 100-fold, with recent enhancement of 1,000-fold achieved by simultaneously enhancing absorption, emission and directionality of the system. By suspending WSe2 flakes onto sub-20-nm-wide trenches in gold substrate, we report a giant photoluminescence enhancement of ∼20,000-fold. It is attributed to an enhanced absorption of the pump laser due to the lateral gap plasmons confined in the trenches and the enhanced Purcell factor by the plasmonic nanostructure. This work demonstrates the feasibility of giant photoluminescence enhancement in WSe2 with judiciously designed plasmonic nanostructures and paves a way towards the implementation of plasmon-enhanced transition metal dichalcogenide photodetectors, sensors and emitters.
| S-EPMC4859068 | biostudies-literature
Project description:Plasmonic metasurfaces exhibiting collective responses known as surface lattice resonances (SLRs) show potential for realizing flat photonic components for wavelength-selective processes, including lasing and optical nonlinearities. However, postfabrication tuning of SLRs remains challenging, limiting the applicability of SLR-based components. Here, we demonstrate how the properties of high quality factor SLRs are easily modified by breaking the symmetry of the nanoparticle surroundings. We break the symmetry by changing the refractive index of the overlying immersion oil by controlling the ambient temperature of the device. We show that a modest temperature change of 10 °C can increase the quality factor of the SLR from 400 to 750. Our results demonstrate accurate and reversible modification of the properties of the investigated SLRs, paving the way toward tunable SLR-based photonic devices. More generally, we show how symmetry breaking of the environment can be utilized for efficient and potentially ultrafast modification of the SLR properties.
| S-EPMC9136927 | biostudies-literature
Project description:Biological applications of core/shell near-infrared quantum dots (QDs) have attracted broad interest due to their unique optical and chemical properties. Additionally, the use of multifunctional nanomaterials with near-infrared QDs and plasmonic functional nanoparticles are promising for applications in electronics, bioimaging, energy, and environmental-related studies. In this work, we experimentally demonstrate how to construct a multifunctional nanoparticle comprised of CdSe/ZnS QDs and gold nanorods (GNRs) where the GNRs were applied to enhance the photoluminescence (PL) of the CdSe/ZnS QDs. In particular, we have obtained the scattering PL spectrum of a single CdSe/ZnS QD and GNR@CdSe/ZnS nanoparticle and comparison results show that the CdSe/ZnS QDs have an apparent PL enhancement of four-times after binding with GNRs. In addition, in vitro experimental results show that the biostability of the GNR@CdSe/ZnS nanoparticles can be improved by using folic acid. A bioimaging study has also been performed where GNR@CdSe/ZnS nanoparticles were used as an optical process for MCF-7 breast cancer cells.
| S-EPMC6334792 | biostudies-literature
Project description:Chiral lattice modes are hybrid states arising from the chiral plasmonic particles assembled in ordered arrays with opportune periodicity. These resonances exhibit dependence on excitation handedness, and their observation in plasmonic lattices is strictly related to the chiroptical features of the fundamental plasmonic unit. Here, the emergence of chiral surface lattice resonances (c-SLRs) is shown in properly engineered arrays of nanohelices (NHs), fully three dimensional (3D) chiral nano-objects fabricated by focused ion beam processing. By tuning the relative weight of plasmonic and photonic components in the hybrid mode, the physical mechanism of strong diffractive coupling leading to the emergence of the lattice modes is analyzed, opening the way to the engineering of chiral plasmonic systems for sensing applications. In particular, a coupling regime is identified where the combination of a large intrinsic circular dichroism (CD) of the plasmonic resonance with a well-defined balance between the photonic quality factor (Q factor) and the plasmonic field enhancement (M) maximizes the capability of the system to discriminate refractive index (RI) changes in the surrounding medium. The results lay the foundation for exploiting CD in plasmonic lattices to high performance refractometric sensing.
| S-EPMC9951338 | biostudies-literature
Project description:The label-free detection of biomolecules by means of fluorescence spectroscopy and imaging is topical. The developed surface-enhanced fluorescence technique has been applied to achieve progress in the label-free detection of biomolecules including deoxyribonucleic acid (DNA) bases. In this study, the effect of a strong enhancement of photoluminescence of 5'-deoxyadenosine-monophosphate (dAMP) by the plasmonic nanocavity metasurface composed of the silver femtosecond laser-induced periodic surface structure (LIPSS) and gold nanorods or nanospheres has been realized at room temperature. The highest value of 1220 for dAMP on the Ag-LIPSS/Au nanorod metasurface has been explained to be a result of the synergetic effect of the generation of hot spots near the sharp edges of LIPSS and Au nanorod tips together with the excitation of collective gap mode of the cavity due to strong near-field plasmonic coupling. A stronger plasmonic enhancement of the phosphorescence compared to the fluorescence is achieved due to a greater overlap of the phosphorescence spectrum with the surface plasmon spectral region. The photoluminescence imaging of dAMP on the metasurfaces shows a high intensity in the blue range. The comparison of Ag-LIPSS/Au nanorod and Ag-LIPSS/Au-nanosphere metasurfaces shows a considerably higher enhancement for the metasurface containing Au nanorods. Thus, the hybrid cavity metasurfaces containing metal LIPSS and nonspherical metal nanoparticles with sharp edges are promising for high-sensitive label-free detection and imaging of biomolecules at room temperature.
| S-EPMC7301579 | biostudies-literature
Project description:Surface-enhanced Raman scattering (SERS) spectroscopy has attracted tremendous interests as a highly sensitive label-free tool. The local field produced by the excitation of localized surface plasmon resonances (LSPRs) dominates the overall enhancement of SERS. Such an electromagnetic enhancement is unfortunately accompanied by a strong modification in the relative intensity of the original Raman spectra, which highly distorts spectral features providing chemical information. Here we propose a robust method to retrieve the fingerprint of intrinsic chemical information from the SERS spectra. The method is established based on the finding that the SERS background originates from the LSPR-modulated photoluminescence, which contains the local field information shared also by SERS. We validate this concept of retrieval of intrinsic fingerprint information in well controlled single metallic nanoantennas of varying aspect ratios. We further demonstrate its unambiguity and generality in more complicated systems of tip-enhanced Raman spectroscopy (TERS) and SERS of silver nanoaggregates.
| S-EPMC5379060 | biostudies-literature
Project description:Transfer printing, the relocation of structures assembled on one surface to a different substrate by adjusting adhesive forces at the surface-substrate interface, is widely used to print electronic circuits on biological substrates like human skin and plant leaves. The fidelity of original structures must be preserved to maintain the functionality of transfer-printed circuits. This work developed new biocompatible methods to transfer a nanoscale square lattice of plasmon resonant nanoparticles from a lithographed surface onto leaf and glass substrates. The fidelity of the ordered nanoparticles was preserved across a large area in order to yield, for the first time, an optical surface lattice resonance on glass substrates. To effect the transfer, interfacial adhesion was adjusted by using laser induction of plasmons or unmounted adhesive. Optical and confocal laser scanning microscopy showed that submicron spacing of the square lattice was preserved in ≥90% of transfer-printed areas up to 4 mm2. Up to 90% of ordered nanoparticles were transferred, yielding a surface lattice resonance measured by transmission UV-vis spectroscopy.
| S-EPMC11209850 | biostudies-literature
Project description:Surface plasmon resonance (SPR) sensing is a well-established high-sensitivity, label-free and real-time detection technique for biomolecular interaction study. Its primary working principle consists of the measurement of the optical refractive index of the medium that is in close vicinity of the sensor surface. Bio-functionalization techniques allow biomolecular events to be located in such a way. Since optical refractive indices of any medium varies with the temperature, the place where the measurement takes place shall be within a temperature-controlled environment in order to ensure any temperature fluctuation is interpreted as a biomolecular event. Since the SPR measurement probes the sensed medium within the penetration depth of the plasmonic wave, which is less or in the order of 1 µm, we propose to use the metallic film constituting the detection surface as a localized heater aiming at controlling finely and quickly the temperature of the sensed medium. The Joule heating principle is then used and the modeling of the heater is reported as well as its validation by thermal IR imaging. Using water as a demonstration medium, SPR measurement results at different temperatures are successfully compared to the theoretical optical refractive index of water versus temperature.
| S-EPMC8001950 | biostudies-literature
Project description:Bifunctional magneto-plasmonic nanoparticles that exhibit synergistically magnetic and plasmonic properties are advanced substrates for surface-enhanced Raman spectroscopy (SERS) because of their excellent controllability and improved detection potentiality. In this study, composite magneto-plasmonic nanoparticles (Fe3O4@AgNPs) were formed by mixing colloid solutions of 50 nm-sized magnetite nanoparticles with 13 nm-sized silver nanoparticles. After drying of the layer of composite Fe3O4@AgNPs under a strong magnetic field, they outperformed the conventional silver nanoparticles during SERS measurements in terms of signal intensity, spot-to-spot, and sample-to-sample reproducibility. The SERS enhancement factor of Fe3O4@AgNP-adsorbed 4-mercaptobenzoic acid (4-MBA) was estimated to be 3.1 × 107 for a 633 nm excitation. In addition, we show that simply by changing the initial volumes of the colloid solutions, it is possible to control the average density of the silver nanoparticles, which are attached to a single magnetite nanoparticle. UV-Vis and SERS data revealed a possibility to tune the plasmonic resonance frequency of Fe3O4@AgNPs. In this research, the plasmon resonance maximum varied from 470 to 800 nm, suggesting the possibility to choose the most suitable nanoparticle composition for the particular SERS experiment design. We emphasize the increased thermal stability of composite nanoparticles under 532 and 442 nm laser light irradiation compared to that of bare Fe3O4 nanoparticles. The Fe3O4@AgNPs were further characterized by XRD, TEM, and magnetization measurements.
| S-EPMC9416134 | biostudies-literature