Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Standing and Lying Ni(OH)₂ Nanosheets on Multilayer Graphene for High-Performance Supercapacitors.

ABSTRACT: For conventional synthesis of Ni(OH)₂/graphene hybrids, oxygen-containing functional groups should be firstly introduced on graphene to serve as active sites for the anchoring of Ni(OH)₂. In this work, a method for growing Ni(OH)₂ nanosheets on multilayer graphene (MLG) with molecular connection is developed which does not need any pre-activation treatments. Moreover, Ni(OH)₂ nanosheets can be controlled to stand or lie on the surface of MLG. The prepared hybrids were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The growth processes are suggested according to their morphologies at different growth stages. The enhanced electrochemical performances as supercapacitor electrode materials were confirmed by cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) techniques. Ni(OH)₂ nanosheets standing and lying on MLG show specific capacities of 204.4 mAh g^-1 and 131.7 mAh g^-1, respectively, at 1 A g^-1 based on the total mass of the hybrids and 81.5% and 92.8% capacity retention at a high current density of 10 A g^-1, respectively. Hybrid supercapacitors with as-prepared hybrids as cathodes and activated carbon as anode were fabricated and tested.

SUBMITTER: Xu J

PROVIDER: S-EPMC8308107 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Fabrication of 9.6?V High-performance Asymmetric Supercapacitors Stack Based on Nickel Hexacyanoferrate-derived Ni(OH)2 Nanosheets and Bio-derived Activated Carbon.

Project description:Hydrated Ni(OH)2 and activated carbon based electrodes are widely used in electrochemical applications. Here we report the fabrication of symmetric supercapacitors using Ni(OH)2 nanosheets and activated carbon as positive and negative electrodes in aqueous electrolyte, respectively. The asymmetric supercapacitors stack connected in series exhibited a stable device voltage of 9.6?V and delivered a stored high energy and power of 30 mWh and 1632 mW, respectively. The fabricated device shows an excellent electrochemical stability and high retention of 81% initial capacitance after 100,000 charge-discharges cycling at high charging current of 500?mA. The positive electrode material Ni(OH)2 nanosheets was prepared through chemical decomposition of nickel hexacyanoferrate complex. The XRD pattern revealed the high crystalline nature of Ni(OH)2 with an average crystallite size of ~10?nm. The nitrogen adsorption-desorption isotherms of Ni(OH)2 nanosheets indicate the formation of mesoporous Ni(OH)2 nanosheets. The chemical synthesis of Ni(OH)2 results the formation of hierarchical nanosheets that are randomly oriented which was confirmed by FE-SEM and HR-TEM analysis. The negative electrode, activated porous carbon (OPAA-700) was obtained from orange peel waste. The electrochemical properties of Ni(OH)2 nanosheets and OPAA-700 were studied and exhibit a high specific capacity of 1126?C/g and high specific capacitance of 311?F/g at current density of 2?A/g, respectively. Ni(OH)2 nanosheets delivered a good rate performance and remarkable capacitance retention of 96% at high current density of 32?A/g.

| S-EPMC6355786 | biostudies-literature

Facile Fabrication of MnO2/Graphene/Ni Foam Composites for High-Performance Supercapacitors.

Project description:A novel MnO2/graphene/Ni foam electrode was fabricated via the impregnation and electrochemical deposition technique with Ni foams serving as substrates and graphene serving as a buffer layer for the enhanced conductivity of MnO2. The samples were characterized using X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). Compared with other methods, our strategy avoids using surfactants and high-temperature treatments. The electrodes exhibited excellent electrochemical performance, high capabilities, and a long cycle life. Various electrochemical properties were systematically studied using cyclic voltammetry and electrochemical impedance spectroscopy. The results showed that the specific capacitance of the MnO2/graphene/Ni composite prepared at 1 mA cm-2 of electrodeposition could achieve a scan rate of 10 mV s-1 at 292.8 F g-1, which confirmed that the graphene layer could remarkably improve electron transfer at the electrolyte-electrode interface. The capacitance retention was about 90% after 5000 cycles. Additionally, a MnO2/graphene//graphene asymmetric supercapacitor was assembled and it exhibited a high-energy density of 91 Wh kg-1 as well as had an excellent power density of 400 W kg-1 at 1 A g-1. It is speculated that the strong adhesion between the graphene and MnO2 can provide a compact structure to enhance the mechanical stability, which can be applied as a new method for energy storage devices.

| S-EPMC8537046 | biostudies-literature

Heterostructural Graphene Quantum Dot/MnO2 Nanosheets toward High-Potential Window Electrodes for High-Performance Supercapacitors.

Project description:The potential window of aqueous supercapacitors is limited by the theoretical value (?1.23 V) and is usually lower than ?1 V, which hinders further improvements for energy density. Here, a simple and scalable method is developed to fabricate unique graphene quantum dot (GQD)/MnO2 heterostructural electrodes to extend the potential window to 0-1.3 V for high-performance aqueous supercapacitor. The GQD/MnO2 heterostructural electrode is fabricated by GQDs in situ formed on the surface of MnO2 nanosheet arrays with good interface bonding by the formation of Mn-O-C bonds. Further, it is interesting to find that the potential window can be extended to 1.3 V by a potential drop in the built-in electric field of the GQD/MnO2 heterostructural region. Additionally, the specific capacitance up to 1170 F g-1 at a scan rate of 5 mV s-1 (1094 F g-1 at 0-1 V) and cycle performance (92.7%@10 000 cycles) between 0 and 1.3 V are observed. A 2.3 V aqueous GQD/MnO2-3//nitrogen-doped graphene ASC is assembled, which exhibits the high energy density of 118 Wh kg-1 at the power density of 923 W kg-1. This work opens new opportunities for developing high-voltage aqueous supercapacitors using in situ formed heterostructures to further increase energy density.

| S-EPMC5979621 | biostudies-literature

Solution growth of NiO nanosheets supported on Ni foam as high-performance electrodes for supercapacitors.

Project description:Well-aligned nickel oxide (NiO) nanosheets with the thickness of a few nanometers supported on a flexible substrate (Ni foam) have been fabricated by a hydrothermal approach together with a post-annealing treatment. The three-dimensional NiO nanosheets were further used as electrode materials to fabricate supercapacitors, with high specific capacitance of 943.5, 791.2, 613.5, 480, and 457.5 F g(-1) at current densities of 5, 10, 15, 20, and 25 A g(-1), respectively. The NiO nanosheets combined well with the substrate. When the electrode material was bended, it can still retain 91.1% of the initial capacitance after 1,200 charging/discharging cycles. Compared with Co3O4 and NiO nanostructures, the specific capacitance of NiO nanosheets is much better. These characteristics suggest that NiO nanosheet electrodes are promising for energy storage application with high power demands.

| S-EPMC4177676 | biostudies-literature

Polypyrrole-Assisted Ag Doping Strategy to Boost Co(OH)2 Nanosheets on Ni Foam as a Novel Electrode for High-Performance Hybrid Supercapacitors.

Project description:Battery-type electrode materials have attracted much attention as efficient and unique types of materials for hybrid battery supercapacitors due to their multiple redox states and excellent electrical conductivity. Designing composites with high chemical and electrochemical stabilities is beneficial for improving the energy storage capability of battery-type electrode materials. We report on an interfacial engineering strategy to improve the energy storage performance of a Co(OH)2-based battery-type material by constructing polypyrrole-assisted and Ag-doped (Ag-doped@Co(OH)2@polypyrrole) nanosheets (NSs) on a Ni foam using a hydrothermal process that provides richer electroactive sites, efficient charge transportation, and an excellent mechanical stability. Physical characterization results revealed that the subsequent decoration of Ag nanoparticles on Co(OH)2 nanoparticles offered an efficient electrical conductivity as well as a reduced interface adsorption energy of OH- in Co(OH)2 nanoparticles as compared to Co(OH)2@polypyrrole-assisted nanoparticles without Ag particles. The heterogeneous interface of the Ag-doped@Co(OH)2@polypyrrole composite exhibited a high specific capacity of 291.2 mAh g-1 at a current density of 2 A g-1, and showed a good cycling stability after 5000 cycles at 5 A g-1. The specific capacity of the doped electrode was enhanced approximately two-fold compared to that of the pure electrode. Thus, the fabricated Ag-doped@Co(OH)2@polypyrrole nanostructured electrodes can be a potential candidate for fabricating low-cost and high-performance energy storage supercapacitor devices.

| S-EPMC9697904 | biostudies-literature

Electrostatic induced stretch growth of homogeneous β-Ni(OH)2 on graphene with enhanced high-rate cycling for supercapacitors.

Project description:Supercapacitors, as one of alternative energy devices, have been characterized by the rapid rate of charging and discharging, and high power density. But they are now challenged to achieve their potential energy density that is related to specific capacitance. Thus it is extremely important to make such materials with high specific capacitances. In this report, we have gained homogenous Ni(OH)2 on graphene by efficiently using of a facile and effective electrostatic induced stretch growth method. The electrostatic interaction triggers advantageous change in morphology and the ordered stacking of Ni(OH)2 nanosheets on graphene also enhances the crystallization of Ni(OH)2. When the as-prepared Ni(OH)2/graphene composite is applied to supercapacitors, they show superior electrochemical properties including high specific capacitance (1503 F g(-1) at 2 mV s(-1)) and excellent cycling stability up to 6000 cycles even at a high scan rate of 50 mV s(-1).

| S-EPMC3888982 | biostudies-literature

In Situ Synthesis of Vertical Standing Nanosized NiO Encapsulated in Graphene as Electrodes for High-Performance Supercapacitors.

Project description:NiO is a promising electrode material for supercapacitors. Herein, the novel vertically standing nanosized NiO encapsulated in graphene layers (G@NiO) are rationally designed and synthesized as nanosheet arrays. This unique vertical standing structure of G@NiO nanosheet arrays can enlarge the accessible surface area with electrolytes, and has the benefits of short ion diffusion path and good charge transport. Further, an interconnected graphene conductive network acts as binder to encapsulate the nanosized NiO particles as core-shell structure, which can promote the charge transport and maintain the structural stability. Consequently, the optimized G@NiO hybrid electrodes exhibit a remarkably enhanced specific capacity up to 1073 C g-1 and excellent cycling stability. This study provides a facial strategy to design and construct high-performance metal oxides for energy storage.

| S-EPMC5867121 | biostudies-literature

Design of NiO Flakes@CoMoO4 Nanosheets Core-Shell Architecture on Ni Foam for High-Performance Supercapacitors.

Project description:As typical electrode materials for supercapacitors, low specific capacitance and insufficient cycling stability of transition metal oxides (TMOs) are still the problems that need to be solved. Design of core-shell structure is considered as an effective method for preparation of high-performance electrode materials. In this work, NiO flakes@CoMoO4 nanosheets/Ni foam (NiO flakes@CoMoO4 NSs/NF) core-shell architecture was constructed by a two-step hydrothermal method. Interestingly, the CoMoO4 NSs are vertically grown on the surface of NiO flakes, forming a two-dimensional (2D) branched core-shell structure. The porous core-shell architecture has relatively high surface area, effective ions channels, and abundant redox sites, resulting in excellent electrochemical performance. As a positive electrode for supercapacitors, NiO flakes@CoMoO4 NSs/NF core-shell architecture exhibits excellent capacitive performance in terms of high specific capacitance (1097 F/g at 1 A/g) and outstanding cycling stability (97.5% after 2000 circles). The assembled asymmetric supercapacitor (ASC) of NiO flakes@CoMoO4 NSs/NF//active carbon (AC)/NF possesses a maximum energy density of 25.8 Wh/kg at power density of 894.7 W/kg. The results demonstrate that NiO flakes@CoMoO4 NSs/NF electrode displays potential applications in supercapacitors and the design of 2D branched core-shell architecture paves an ideal way to obtain high-performance TMOs electrodes.

| S-EPMC6606686 | biostudies-literature

Synthesis of Cubic Ni(OH)2 Nanocages Through Coordinating Etching and Precipitating Route for High-Performance Supercapacitors.

Project description:Rational design of cage-like structure is an effective method for the improvement of the capacitive performance of transition metal hydroxides. In this work, cubic Ni(OH)2 nanocages (Ni(OH)2 NCs) were constructed through a coordinating etching and precipitating (CEP) route. Ni(OH)2 NCs possess abundant active sites, sufficient diffusion channels, and accelerated electron transfer rate, which are beneficial for electrochemical kinetics. As a positive electrode for supercapacitors, the Ni(OH)2 NCs/Ni foam (NF) electrode presents a high specific capacitance of 539.8 F g-1 at 1 A g-1, which is much larger than that of broken Ni(OH)2 NCs/NF (Ni(OH)2 BNCs/NF, 87.3 F g-1 at 1 A g-1). In addition, the Ni(OH)2 NCs/NF electrode still retains 96.9% of its initial specific capacitance after 2000 cycles. The asymmetric supercapacitor (ASC) devices were assembled using Ni(OH)2 NCs/NF and activated carbon (AC)/NF as positive and negative electrodes, respectively. The ASC exhibits a higher energy density of 23.3 Wh kg-1 at a power density of 800 W kg-1 compared to Ni(OH)2 BNCs/NF (3 Wh kg-1 at 880 W kg-1). These results demonstrate that the Ni(OH)2 NCs/NF electrode presents potential applications in the field of energy storage. The design of cage-like structure paves an effective way to achieve high-performance electrode materials.

| S-EPMC6890925 | biostudies-literature

Green Synthesis of Free Standing Cellulose/Graphene Oxide/Polyaniline Aerogel Electrode for High-Performance Flexible All-Solid-State Supercapacitors.

Project description:The cellulose/graphene oxide (GO) networks as the scaffold of free-standing aerogel electrodes are developed by using lithium bromide aqueous solution, as the solvent, to ensure the complete dissolution of cotton linter pulp and well dispersion/reduction of GO nanosheets. Polyaniline (PANI) nanoclusters are then coated onto cellulose/GO networks via in-situ polymerization of aniline monomers. By optimized weight ratio of GO and PANI, the ternary cellulose/GO3.5/PANI aerogel film exhibits well-defined three-dimensional porous structures and high conductivity of 1.15 S/cm, which contributes to its high areal specific capacitance of 1218 mF/cm2 at the current density of 1.0 mA/cm2. Utilizing this cellulose/GO3.5/PANI aerogel film as electrodes in a symmetric configuration supercapacitor can result in an outstanding energy density as high as 258.2 µWh/cm2 at a power density of 1201.4 µW/cm2. Moreover, the device can maintain nearly constant capacitance under different bending deformations, suggesting its promising applications in flexible electronics.

| S-EPMC7466413 | biostudies-literature