Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Controlled Fabrication of Quality ZnO NWs/CNTs and ZnO NWs/Gr Heterostructures via Direct Two-Step CVD Method.

ABSTRACT: A novel and advanced approach of growing zinc oxide nanowires (ZnO NWs) directly on single-walled carbon nanotubes (SWCNTs) and graphene (Gr) surfaces has been demonstrated through the successful formation of 1D-1D and 1D-2D heterostructure interfaces. The direct two-step chemical vapor deposition (CVD) method was utilized to ensure high-quality materials' synthesis and scalable production of different architectures. Iron-based universal compound molecular ink was used as a catalyst in both processes (a) to form a monolayer of horizontally defined networks of SWCNTs interfaced with vertically oriented ZnO NWs and (b) to grow densely packed ZnO NWs directly on a graphene surface. We show here that our universal compound molecular ink is efficient and selective in the direct synthesis of ZnO NWs/CNTs and ZnO NWs/Gr heterostructures. Heterostructures were also selectively patterned through different fabrication techniques and grown in predefined locations, demonstrating an ability to control materials' placement and morphology. Several characterization tools were employed to interrogate the prepared heterostructures. ZnO NWs were shown to grow uniformly over the network of SWCNTs, and much denser packed vertically oriented ZnO NWs were produced on graphene thin films. Such heterostructures can be used widely in many potential applications, such as photocatalysts, supercapacitors, solar cells, piezoelectric or thermal actuators, as well as chemical or biological sensors.

SUBMITTER: Schaper N

PROVIDER: S-EPMC8308266 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Fabrication of ZnO/CNTs for Application in CO2 Sensor at Room Temperature.

Project description:Thin films of ZnO and ZnO/carbon nanotubes (CNTs) are prepared and used as CO2 gas sensors. The spray pyrolysis method was used to prepare both ZnO and ZnO/CNTs films, with CNTs first prepared using the chemical vapor deposition method (CVD). The chemical structure and optical analyses for all the prepared nanomaterials were performed using X-ray diffraction (XRD), Fourier transformer infrared spectroscopy (FTIR), and UV/Vis spectrophotometer devices, respectively. According to the XRD analysis, the crystal sizes of ZnO and ZnO/CNTs were approximately 50.4 and 65.2 nm, respectively. CNTs have average inner and outer diameters of about 3 and 13 nm respectively, according to the transmitted electron microscope (TEM), and a wall thickness of about 5 nm. The detection of CO2 is accomplished by passing varying rates of the gas from 30 to 150 sccm over the prepared thin-film electrodes. At 150 sccm, the sensitivities of ZnO and ZnO/CNTs sensors are 6.8% and 22.4%, respectively. The ZnO/CNTs sensor has a very stable sensitivity to CO2 gas for 21 days. Moreover, this sensor has a high selectivity to CO2 in comparison with other gases, in which the ZnO/CNTs sensor has a higher sensitivity to CO2 compared to H2 and C2H2.

| S-EPMC8624847 | biostudies-literature

Broadband photodetection using one-step CVD-fabricated MoS2/MoO2 microflower/microfiber heterostructures.

Project description:Molybdenum disulfide (MoS2) has been combined so far with other photodetecting semiconductors as an enhancing agent owing to its optical and electronic properties. Existing approaches demonstrated MoS2-incorporated photodetector devices using complex and costly fabrication processes. Here, we report on simplified one-step on the chemical vapor deposition (CVD) based synthesis of a unique microfiber/microflower MoS2-based heterostructure formed by capturing MoO2 intermediate material during the CVD process. This particular morphology engenders a material chemical and electronic interplay exalting the heterostructure absorption up to ~ 98% over a large spectral range between 200 and 1500 nm. An arsenal of characterization methods were used to elucidate the properties of these novel heterostructures including Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectrometry, high-resolution transmission and scanning electron microscopies, and Kelvin probe force microscopy. Our findings revealed that the MoS2 and the MoO2 crystallize in the hexagonal and monoclinic lattices, respectively. The integration of the MoS2/MoO2 heterostructures into functional photodetectors revealed a strong photoresponse under both standard sun illumination AM1.5G and blue light excitation at 450 nm. Responsivity and detectivity values as high as 0.75 mA W-1 and 1.45 × 107 Jones, respectively, were obtained with the lowest light intensity of 20 mW cm-2 at only 1 V bias. These results demonstrate the high performances achieved by the unique MoS2/MoO2 heterostructure for broadband light harvesting and pave the way for their adoption in photodetection applications.

| S-EPMC9772214 | biostudies-literature

Fabrication of Hierarchical ZnO@NiO Core-Shell Heterostructures for Improved Photocatalytic Performance.

Project description:ZnO@NiO core-shell heterostructures with high photocatalytic efficiency and reusability were prepared via electrochemical deposition on carbon fiber cloth substrates. Their photocatalytic properties were investigated by measuring the degradation of rhodamine B and methyl orange (MO) under ultraviolet light irradiation. The photodegradation efficiency of the ZnO@NiO heterostructures toward both dyes was better than those of the pure ZnO nanorods and NiO nanosheets. The higher performance could be attributed to the formation of p-n heterojunction between ZnO and NiO. Especially, the ZnO@NiO heterostructure formed upon deposition of NiO for 10 min degraded 95% of MO under ultraviolet light irradiation for 180 min. The high photodegradation efficiency of the ZnO@NiO heterostructures was also attributed to the high separation efficiency of photogenerated carriers, as confirmed by the higher photocurrent of the ZnO@NiO heterostructures (eightfold) when compared with that of the pure ZnO nanorods. Moreover, the high photodegradation efficiency of the ZnO@NiO heterostructures was maintained over three successive degradation experiments and decreased to 90% after the third cycle.

| S-EPMC6117222 | biostudies-literature

Fabrication of Rectification Nanosensors by Direct Current Dielectrophoresis Alignment of ZnO Nanowires.

Project description:This work demonstrates the fabrication and characterization of ZnO nanowire-based devices in a metal-nanowire-metal configuration using the direct current dielectrophoresis alignment across Au electrodes. The current-voltage characteristics of the devices revealed that they were rectifying, and the direction of rectification was determined by the direction of current due to the asymmetric Joule heating in the dielectrophoresis alignment process. Joule heating caused the Au atoms to diffuse from the Au electrodes to the inner ZnO NWs and the formation of Schottky contact at the Au/ZnO interface. A fast and sensitive photoresponse was achieved for the rectifying devices in reverse-biased mode due to the carrier injection and photocurrent gain under UV illumination. Such direct current dielectrophoresis alignment of ZnO nanowires is a facile method for fabricating rectification devices with application in sensitive and fast UV detecting sensors.

| S-EPMC8134615 | biostudies-literature

Photo-oscillations in MgZnO/ZnO heterostructures.

Project description:We theoretically examine the characteristics of microwave-induced magnetoresistance (MIRO) and photovoltage oscillations in MgZno/ZnO heterostructures. We demonstrate that both kind of oscillations, although described with different physical properties, are intimately related sharing the same physical origin. We use the radiation driven electron orbit model showing that the interplay of radiation driven swinging Landau orbits and the scattering processes are at the heart of the oscillations in both scenarios. Thus, our simulations show that all photo-oscillations present the main features of MIRO: they are periodic with the inverse of the magnetic field and the oscillations minima are 1/4 cycle shifted.

| S-EPMC9797542 | biostudies-literature

One-step fabrication of crystalline metal nanostructures by direct nanoimprinting below melting temperatures.

Project description:Controlled fabrication of metallic nanostructures plays a central role in much of modern science and technology, because changing the dimensions of a nanocrystal enables tailoring of its mechanical, electronic, optical, catalytic and antibacterial properties. Here we show direct superplastic nanoimprinting (SPNI) of crystalline metals well below their melting temperatures, generating ordered nanowire arrays with aspect ratios up to ∼2,000 and imprinting features as small as 8 nm. Surface-enhanced Raman scattering (SERS) spectra reveal strongly enhanced electromagnetic signals from the prepared nanorod arrays with sizes up to ∼100 nm, which indicates that our technique can provide an ideal way to fabricate robust SERS substrates. SPNI, as a one-step, controlled and reproducible nanofabrication method, could facilitate the applications of metal nanostructures in bio-sensing, diagnostic imaging, catalysis, food industry and environmental conservation.

| S-EPMC5379067 | biostudies-literature

Fabrication Method Study of ZnO Nanocoated Cellulose Film and Its Piezoelectric Property.

Project description:Recently, a cellulose-based composite material with a thin ZnO nanolayer-namely, ZnO nanocoated cellulose film (ZONCE)-was fabricated to increase its piezoelectric charge constant. However, the fabrication method has limitations to its application in mass production. In this paper, a hydrothermal synthesis method suitable for the mass production of ZONCE (HZONCE) is proposed. A simple hydrothermal synthesis which includes a hydrothermal reaction is used for the production, and the reaction time is controlled. To improve the piezoelectric charge constant, the hydrothermal reaction is conducted twice. HZONCE fabricated by twice-hydrothermal reaction shows approximately 1.6-times improved piezoelectric charge constant compared to HZONCE fabricated by single hydrothermal reaction. Since the fabricated HZONCE has high transparency, dielectric constant, and piezoelectric constant, the proposed method can be applied for continuous mass production.

| S-EPMC5553519 | biostudies-other

Investigation of ZnO-decorated CNTs for UV Light Detection Applications.

Project description:Multi-walled carbon nanotubes (CNTs) decorated with zinc oxide nanoparticles (ZnO NPs) were prepared in isopropanol solution by a simple, room-temperature process and characterized from structural, morphological, electronic, and optical points of view. A strong interaction between ZnO and CNTs is fully confirmed by all the characterization techniques. ZnO-CNTs nanocomposites, with different weight ratios, were deposited as a dense layer between two electrodes, in order to investigate the electrical behaviour. In particular, the electrical response of the nanocomposite layers to UV light irradiation was recorded for a fixed voltage: As the device is exposed to the UV lamp, a sharp current drop takes place and then an increase is observed as the irradiation is stopped. The effect can be explained by adsorption and desorption phenomena taking place on the ZnO nanoparticle surface under irradiation and by charge transfer between ZnO and CNTs, thanks to the strong interaction between the two nanomaterials. The nanocomposite material shows good sensitivity and fast response to UV irradiation. Room temperature and low-cost processes used for the device preparation combined with room temperature and low voltage operational conditions make this methodology very promising for large scale UV detectors applications.

| S-EPMC6722801 | biostudies-other

CNTs

Project description:CNTs Transcriptome or Gene expression

| PRJNA317249 | ENA

Fabrication of Microfluidic Chips Based on an EHD-Assisted Direct Printing Method.

Project description:Microfluidic chips have been widely used in many areas such as biology, environmental monitoring, and micromixing. With the increasing popularity and complexity of microfluidic systems, rapid and convenient approaches for fabricating microfluidic chips are necessary. In this study, a method based on EHD (electrohydrodynamic)-assisted direct printing is proposed. Firstly, the principle of EHD-assisted direct printing was analyzed. The influence of the operating voltage and moving speed of the work table on the width of a paraffin wax model was studied. Then, two kinds of paraffin wax molds for micromixing with channel widths of 120 μm were prepared. A polydimethylsiloxane (PDMS) micromixer was fabricated by replicating the paraffin wax mold, and the micromixing of blue and yellow dye was realized. The results show that EHD-assisted direct printing can be used to make complex microscale structures, which has the potential to greatly simplify the manufacturing process.

| S-EPMC7146459 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data