Formation Mechanisms and Phase Stability of Solid-State Grown CsPbI3 Perovskites.
Ontology highlight
ABSTRACT:
SUBMITTER: Satta J
PROVIDER: S-EPMC8308418 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Solid-state batteries have significant advantages over conventional liquid batteries, providing improved safety, design freedom, and potentially reaching higher power and energy densities. The major obstacle in the commercial realization of solid-state batteries is the high resistance at the interfaces. To overcome this bottleneck, it is essential to achieve an in-depth fundamental understanding of the crucial electrochemical processes at the interface. Conventional electrochemical stability calculations for solid electrolytes, determining the formation energy toward the energetically favorable decomposition products, often underestimate the stability window because kinetics are not included. In this work, we introduce a computational scheme that takes the redox-activity of the solid electrolytes into account in calculating the electrochemical stability, and it in many cases appears to dictate the electrochemical stability. This methodology is applied to different chemical and structural classes of solid electrolytes, exhibiting excellent agreement with experimentally observed electrochemical stability. In contrast with current perception, the results suggest that the electrochemical stability of solid electrolytes is not always determined by the decomposition products but often originates from the intrinsic stability of the material itself. The processes occurring outside the stability window can lead toward phase separation or solid solution depending on the reaction mechanism of the material. These newly gained insights provide better predictions of the practical voltage ranges and structural stabilities of solid electrolytes, guiding solid-state batteries toward better interfaces and material design.
| S-EPMC8479866 | biostudies-literature
Project description:Owing to inevitable thermal/moisture instability for organic-inorganic hybrid perovskites, pure inorganic perovskite cesium lead halides with both inherent stability and prominent photovoltaic performance have become research hotspots as a promising candidate for commercial perovskite solar cells. However, it is still a serious challenge to synthesize desired cubic cesium lead iodides (CsPbI3) with superior photovoltaic performance for its thermodynamically metastable characteristics. Herein, polymer poly-vinylpyrrolidone (PVP)-induced surface passivation engineering is reported to synthesize extra-long-term stable cubic CsPbI3. It is revealed that acylamino groups of PVP induce electron cloud density enhancement on the surface of CsPbI3, thus lowering surface energy, conducive to stabilize cubic CsPbI3 even in micrometer scale. The cubic-CsPbI3 PSCs exhibit extra-long carrier diffusion length (over 1.5??m), highest power conversion efficiency of 10.74% and excellent thermal/moisture stability. This result provides important progress towards understanding of phase stability in realization of large-scale preparations of efficient and stable inorganic PSCs.
| S-EPMC5852044 | biostudies-literature
Project description:ABO3 perovskites are oxide materials that are used for a variety of applications such as solid oxide fuel cells, piezo-, ferro-electricity and water splitting. Due to their remarkable stability with respect to cation substitution, new compounds for such applications potentially await discovery. In this work, we present an exhaustive dataset of formation energies of 5,329 cubic and distorted perovskites that were calculated using first-principles density functional theory. In addition to formation energies, several additional properties such as oxidation states, band gap, oxygen vacancy formation energy, and thermodynamic stability with respect to all phases in the Open Quantum Materials Database are also made publicly available. This large dataset for this ubiquitous crystal structure type contains 395 perovskites that are predicted to be thermodynamically stable, of which many have not yet been experimentally reported, and therefore represent theoretical predictions. The dataset thus opens avenues for future use, including materials discovery in many research-active areas.
| S-EPMC5644373 | biostudies-literature
Project description:?-CsPbI3 quantum dots (QDs) show outstanding photoelectrical properties that had been harnessed in the fabrication of perovskite QDs solar cells. Nevertheless, the stabilization of the CsPbI3 perovskite cubic phase remains a challenge due to its own thermodynamic and the presence of surface defects. Herein, we report the optimization of the CsPbI3 QDs solar cells, by monitoring the structure, the morphology and the optoelectronic properties after a precise treatment, consisting of the conventional solvent washing with a time limited ultraviolet (UV) exposure combination, during the layer-by-layer deposition. The UV treatment compensates the defects coming from the essential but deleterious washing treatment. The material is stable for 200 h and the PCE improved by the 25% compared with that of the device without UV treatment. The photo-enhanced ion mobility mechanism is discussed as the main process for the CsPbI3 QDs and solar cell stability.
| S-EPMC7466586 | biostudies-literature
Project description:A key challenge of magnetometry lies in the simultaneous optimization of magnetic field sensitivity and maximum field range. In interferometry-based magnetometry, a quantum two-level system acquires a dynamic phase in response to an applied magnetic field. However, due to the 2? periodicity of the phase, increasing the coherent interrogation time to improve sensitivity reduces field range. Here we introduce a route towards both large magnetic field range and high sensitivity via measurements of the geometric phase acquired by a quantum two-level system. We experimentally demonstrate geometric-phase magnetometry using the electronic spin associated with the nitrogen vacancy (NV) color center in diamond. Our approach enables unwrapping of the 2? phase ambiguity, enhancing field range by 400 times. We also find additional sensitivity improvement in the nonadiabatic regime, and study how geometric-phase decoherence depends on adiabaticity. Our results show that the geometric phase can be a versatile tool for quantum sensing applications.
| S-EPMC6258709 | biostudies-other
Project description:BACKGROUND:When Bacillus subtilis is cultured in a complex fluid medium under conditions where cell separation is suppressed, populations of multicellular macrofibers arise that mature into ball-like structures. The final sedentary forms are found distributed in patterns on the floor of the growth chamber although individual cells have no flagellar-driven motility. The nature of the patterns and their mode of formation are described in this communication. RESULTS:Time-lapse video films reveal that fiber-fiber contact in high density populations of macrofibers resulted in their joining either by entwining or supercoiling. Joining led to the production of aggregate structures that eventually contained all of the fibers located in an initial area. Fibers were brought into contact by convection currents and motions associated with macrofiber self-assembly such as walking, pivoting and supercoiling. Large sedentary aggregate structures cleared surrounding areas of other structures by dragging them into the aggregate using supercoiling of extended fibers to power dragging. The spatial distribution of aggregate structures in 6 mature patterns containing a total of 637 structures was compared to that expected in random theoretical populations of the same size distributed in the same surface area. Observed and expected patterns differ significantly. The distances separating all nearest neighbors from one another in observed populations were also measured. The average distance obtained from 1451 measurements involving 519 structures was 0.73 cm. These spacings were achieved without the use of flagella or other conventional bacterial motility mechanisms. A simple mathematical model based upon joining of all structures within an area defined by the minimum observed distance between structures in populations explains the observed distributions very well. CONCLUSIONS:Bacterial macrofibers are capable of colonizing a solid surface by forming large multicellular aggregate structures that are distributed in unique two-dimensional patterns. Cell growth geometry governs in an hierarchical way the formation of these patterns using forces associated with twisting and supercoiling to drive motions and the joining of structures together. Joining by entwining, supercoiling or dragging all require cell growth in a multicellular form, and all result in tightly fused aggregate structures.
| S-EPMC65521 | biostudies-literature
Project description:Two-dimensional (2D) hybrid perovskites make up an emerging class of materials for optoelectronic applications in which inorganic octahedral layers are separated by nonconductive large organic cations. This leads to a high-dimensional and dielectric confinement and hence a high exciton binding energy, which severely limits their application in devices in which charge carrier separation is required. In this work, we achieve improved charge separation by replacing nonconductive organic cations with organic charge-transfer complexes consisting of a pyrene donor and a tetracyanoquinodimethane acceptor. Steady-state absorption measurements show that these materials exhibit optical features that match with the absorption of the organic charge-transfer complexes. Using microwave conductivity and femtosecond transient absorption, we show that photoexcitation of these charge-transfer states leads to long-lived mobile charges in the inorganic layers. While the efficiency of charge separation is relatively low, these experiments demonstrate that it is possible to induce charge separation in solid-state 2D perovskites by engineering the organic layer.
| S-EPMC7008460 | biostudies-literature
Project description:Organic-inorganic tin(II) halide perovskites have emerged as promising alternatives to lead halide perovskites in optoelectronic applications. While they suffer from considerably poorer performance and stability in comparison to their lead analogues, their performance improvements have so far largely been driven by trial and error efforts due to a critical lack of methods to probe their atomic-level microstructure. Here, we identify the challenges and devise a 119Sn solid-state NMR protocol for the determination of the local structure of mixed-cation and mixed-halide tin(II) halide perovskites as well as their degradation products and related phases. We establish that the longitudinal relaxation of 119Sn can span 6 orders of magnitude in this class of compounds, which makes judicious choice of experimental NMR parameters essential for the reliable detection of various phases. We show that Cl/Br and I/Br mixed-halide perovskites form solid alloys in any ratio, while only limited mixing is possible for I/Cl compositions. We elucidate the degradation pathways of Cs-, MA-, and FA-based tin(II) halides and show that degradation leads to highly disordered, qualitatively similar products, regardless of the A-site cation and halide. We detect the presence of metallic tin among the degradation products, which we suggest could contribute to the previously reported high conductivities in tin(II) halide perovskites. 119Sn NMR chemical shifts are a sensitive probe of the halide coordination environment as well as of the A-site cation composition. Finally, we use variable-temperature multifield relaxation measurements to quantify ion dynamics in MASnBr3 and establish activation energies for motion and show that this motion leads to spontaneous halide homogenization at room temperature whenever two different pure-halide perovskites are put in physical contact.
| S-EPMC7311059 | biostudies-literature
Project description:Hybrid (organic-inorganic) multication lead halide perovskites hold promise for a new generation of easily processable solar cells. Best performing compositions to date are multiple-cation solid alloys of formamidinium (FA), methylammonium (MA), cesium, and rubidium lead halides which provide power conversion efficiencies up to around 22%. Here, we elucidate the atomic-level nature of Cs and Rb incorporation into the perovskite lattice of FA-based materials. We use 133Cs, 87Rb, 39K, 13C, and 14N solid-state MAS NMR to probe microscopic composition of Cs-, Rb-, K-, MA-, and FA-containing phases in double-, triple-, and quadruple-cation lead halides in bulk and in a thin film. Contrary to previous reports, we have found no proof of Rb or K incorporation into the 3D perovskite lattice in these systems. We also show that the structure of bulk mechanochemical perovskites bears close resemblance to that of thin films, making them a good benchmark for structural studies. These findings provide fundamental understanding of previously reported excellent photovoltaic parameters in these systems and their superior stability.
| S-EPMC5719467 | biostudies-literature
Project description:Properties that can now be achieved with advanced, blue indium gallium nitride light emitting diodes (LEDs) lead to their potential as replacements for existing infrastructure in general illumination, with important implications for efficient use of energy. Further advances in this technology will benefit from reexamination of the modes for incorporating this materials technology into lighting modules that manage light conversion, extraction, and distribution, in ways that minimize adverse thermal effects associated with operation, with packages that exploit the unique aspects of these light sources. We present here ideas in anisotropic etching, microscale device assembly/integration, and module configuration that address these challenges in unconventional ways. Various device demonstrations provide examples of the capabilities, including thin, flexible lighting "tapes" based on patterned phosphors and large collections of small light emitters on plastic substrates. Quantitative modeling and experimental evaluation of heat flow in such structures illustrates one particular, important aspect of their operation: small, distributed LEDs can be passively cooled simply by direct thermal transport through thin-film metallization used for electrical interconnect, providing an enhanced and scalable means to integrate these devices in modules for white light generation.
| S-EPMC3121821 | biostudies-other