Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A rapid benchtop method to assess biofilm on marine fouling control coatings.

ABSTRACT: A rapid benchtop method to measure the torque associated with minidiscs rotating in water using a sensitive analytical rheometer has been used to monitor the drag caused by marine fouling on coated discs. The method was calibrated using sandpaper surfaces of known roughness. Minidiscs coated with commercial fouling control coatings, plus an inactive control, were exposed in an estuarine harbour. After 176 days the drag on the fouling control-coated discs, expressed as a moment coefficient, was between 73% and 90% less than the drag on the control coating. The method has potential use as a screen for novel antifouling and drag reducing coatings and surfaces. Roughness functions derived using Granville's indirect similarity law are similar to patterns found in the general hydrodynamics literature, and so rotational minidisc results can be considered with reference to other fouling drag datasets.Supplemental data for this article is available online at https://doi.org/10.1080/08927014.2021.1929937 .

SUBMITTER: Dennington SPJ

PROVIDER: S-EPMC8312500 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Anti-Fouling Properties of Phosphonium Ionic Liquid Coatings in the Marine Environment.

Project description:Biofouling is the buildup of marine organisms on a submerged material. This research tests the efficacy of phosphonium ion gels comprising phosphonium monomers ([P444VB][AOT] and [P888VB][AOT]) and free ionic liquid ([P4448][AOT], [P88814][AOT]) (10 to 50 wt%), varying copper(II) oxide biocide concentrations (0 to 2 wt%), and the docusate anion [AOT]- for added hydrophobicity. The efficacy of these formulations was tested using a seachest simulator protected from light and tidal currents in New Zealand coastal waters over the summer and autumn periods. Anti-fouling performance was correlated with the hydrophobicity of the surface (water contact angle: 14-131°) and biocide concentration. Formulations with higher hydrophobicity (i.e., less free ionic liquid and longer alkyl chain substituents) displayed superior anti-fouling performance. The presence of the copper(II) biocide negatively affected anti-fouling performance via significant increases to hydrophilicity. No correlation was observed between antimicrobial activity and anti-fouling performance. Overall, phosphonium ion gels show potential for combining anti-fouling and foul release properties.

| S-EPMC10534580 | biostudies-literature

Stable low-fouling plasma polymer coatings on polydimethylsiloxane.

Project description:Polydimethylsiloxane (DMS) is a popular material for microfluidics, but it is hydrophobic and is prone to non-specific protein adsorption. In this study, we explore methods for producing stable, protein resistant, tetraglyme plasma polymer coatings on PDMS by combining extended baking processes with multiple plasma polymer coating steps. We demonstrate that by using this approach, it is possible to produce a plasma polymer coatings that resist protein adsorption (<10 ng/cm(2)) and are stable to storage over at least 100 days. This methodology can translate to any plasma polymer system, enabling the introduction of a wide range of surface functionalities on PDMS surfaces.

| S-EPMC3470602 | biostudies-other

Electroactive Polyhydroquinone Coatings for Marine Fouling Prevention-A Rejected Dynamic pH Hypothesis and a Deceiving Artifact in Electrochemical Antifouling Testing.

Project description:Nanometer-thin coatings of polyhydroquinone (PHQ), which release and absorb protons upon oxidation and reduction, respectively, were tested for electrochemically induced anti-biofouling activity under the hypothesis that a dynamic pH environment would discourage fouling. Antifouling tests in artificial seawater using the marine, biofilm-forming bacterium Vibrio alginolyticus proved the coatings to be ineffective in fouling prevention but revealed a deceiving artifact from the reactive species generated at the counter electrode (CE), even for electrochemical bias potentials as low as |400| mV versus Ag|AgCl. These findings provide valuable information on the preparation of nanothin PHQ coatings and their electrochemical behavior in artificial seawater. The results further demonstrate that it is critical to isolate the CE in electrochemical anti-biofouling testing.

| S-EPMC6641732 | biostudies-literature

Rapid aggregation of biofilm-covered microplastics with marine biogenic particles.

Project description:Ocean plastic pollution has resulted in a substantial accumulation of microplastics in the marine environment. Today, this plastic litter is ubiquitous in the oceans, including even remote habitats such as deep-sea sediments and polar sea ice, and it is believed to pose a threat to ecosystem health. However, the concentration of microplastics in the surface layer of the oceans is considerably lower than expected, given the ongoing replenishment of microplastics and the tendency of many plastic types to float. It has been hypothesized that microplastics leave the upper ocean by aggregation and subsequent sedimentation. We tested this hypothesis by investigating the interactions of microplastics with marine biogenic particles collected in the southwestern Baltic Sea. Our laboratory experiments revealed a large potential of microplastics to rapidly coagulate with biogenic particles, which substantiates this hypothesis. Together with the biogenic particles, the microplastics efficiently formed pronounced aggregates within a few days. The aggregation of microplastics and biogenic particles was significantly accelerated by microbial biofilms that had formed on the plastic surfaces. We assume that the demonstrated aggregation behaviour facilitates the export of microplastics from the surface layer of the oceans and plays an important role in the redistribution of microplastics in the oceans.

| S-EPMC6125906 | biostudies-literature

Comparison of anti-fouling surface coatings for applications in bacteremia diagnostics.

Project description:To accurately diagnose microbial infections in blood, it is essential to recover as many microorganisms from a sample as possible. Unfortunately, recovering such microorganisms depends significantly on their adhesion to the surfaces of diagnostic devices. Consequently, we sought to minimize the adhesion of methicillin-sensitive Staphylococcus aureus (MSSA) to the surface of polypropylene- and acrylic-based bacteria concentration devices. These devices were treated with 11 different coatings having various charges and hydrophobicities. Some coatings promoted bacterial adhesion under centrifugation, whereas others were more likely to prevent it. Experiments were run using a simple buffer system and lysed blood, both inoculated with MSSA. Under both conditions, Hydromer's 7-TS-13 and Aqua65JL were most effective at reducing bacterial adhesion.

| S-EPMC4137785 | biostudies-literature

Simple and Rapid Method for Detecting Biofilm Forming Bacteria.

Project description:Biofilm forming bacteria play a vital role in causing infectious diseases and for enhancing the efficiency of the bioremediation process through immobilization. Different media and conditions have been reported for detecting biofilm forming bacteria, however, they are not quite rapid. Here, we propose the use of a simple medium which can be used for detecting biofilm former, and also provide a mechanism to regulate the expression of biofilm formation process.

| S-EPMC5243243 | biostudies-literature

A universal, benchtop, gel-free method for the rapid and simultaneous isolation of all known classes of functional small RNAs

Project description:All known silencing small (s)RNAs operate via ARGONAUTE(AGO)-family proteins within RNA-induced-silencing-complexes (RISCs). Based on AGOs conserved biochemical properties, we have developed a universal, 15-min benchtop extraction procedure allowing simultaneous purification of all classes of RISC-associated sRNAs known to date, without prior knowledge of the samples-intrinsic AGO repertoires. Optimized into a user-friendly kit, the method –coined “TraPR” for Trans-kingdom, rapid, affordable Purification of RISCs– operates irrespectively of the organism, tissue, cell type or bio-fluid of interest, including from minute amounts of input material. The method is highly suited for direct sRNA deep-sequencing, with TrAPR-generated libraries being qualitatively and quantitatively at least on-par with those obtained via gold-standard procedures involving tedious polyacrylamide gel excisions. TraPR considerably improves the quality and consistency of sRNA sample preparation including from notoriously difficult-to-handle tissues/bio-fluids such as starchy storage roots and mammalian plasma, and regardless of RNA contaminants or samples’ RNA-degradation status.

2020-07-01 | GSE134516 | GEO

Investigating the widespread introduction of a tropical marine fouling species.

Project description:Little is known about the number and rate of introductions into terrestrial and marine tropical regions, and if introduction patterns and processes differ from temperate latitudes. Botryllid ascidians (marine invertebrate chordates) are an interesting group to study such introduction differences because several congeners have established populations across latitudes. While temperate botryllid invasions have been repeatedly highlighted, the global spread of tropical Botrylloides nigrum (Herdman, 1886) has been largely ignored. We sampled B. nigrum from 16 worldwide warm water locations, including around the Panama Canal, one of the largest shipping hubs in the world and a possible introduction corridor. Using mitochondrial (COI) and nuclear (ANT) markers, we discovered a single species with low genetic divergence and diversity that has established in the Atlantic, Pacific, Indo-Pacific, and Mediterranean Oceans. The Atlantic Ocean contained the highest diversity and multilocus theta estimates and may be a source for introductions to other regions. A high frequency of one mitochondrial haplotype was detected in Pacific populations that may represent a recent introduction in this region. In comparison to temperate relatives, B. nigrum displayed lower (but similar to temperate Botrylloides violaceus) genetic divergence and diversity at both loci that may represent a more recent global spread or differences in introduction pressures in tropical regions. Additionally, chimeras (genetically distinct individuals sharing a single body) were detected in three populations by the mitochondrial locus and validated using cloning, and these individuals contained new haplotype diversity not detected in any other colonies.

| S-EPMC4788974 | biostudies-literature

Fouling Release Coatings Based on Acrylate-MQ Silicone Copolymers Incorporated with Non-Reactive Phenylmethylsilicone Oil.

Project description:Copolymers containing MQ silicone and acrylate were synthesized by controlling the additive amount of compositions. Subsequently, fouling release coatings based on the copolymer with the incorporation of non-reactive phenylmethylsilicone oil were prepared. The surface properties of the coating (CAMQ40) were consistent with that of the polydimethylsiloxane (PDMS) elastomer, which ensured good hydrophobicity. Moreover, the seawater volume swelling rate of all prepared coatings was less than 5%, especially for CAMQ40 with only 1.37%. Copolymers enhanced the mechanical properties of the coatings, while the enhancement was proportional to the molar content of structural units from acrylate in the copolymer. More importantly, the adhesion performance between the prepared coatings and substrates indicated that pull-off strength values were more than 1.6 MPa, meaning a high adhesion strength. The phenylmethylsilicone oil leaching observation determined that the oil leaching efficiency increased with the increase in the structural unit's molar content from MQ silicone in the copolymer, which was mainly owing to the decrease in compatibility between oil and the cured coating, as well as the decrease in mechanical properties. High oil leaching efficiency could make up for the decrease in the biofouling removal rate due to the enhancement of the elastic modulus. For CAMQ40, it had an excellent antifouling performance at 30 days of exposure time with more than 92% of biofouling removal rate, which was confirmed by biofilm adhesion assay.

| S-EPMC8469071 | biostudies-literature

Semiquantitative Performance and Mechanism Evaluation of Carbon Nanomaterials as Cathode Coatings for Microbial Fouling Reduction.

Project description:In this study, we examine bacterial attachment and survival on a titanium (Ti) cathode coated with various carbon nanomaterials (CNM): pristine carbon nanotubes (CNT), oxidized carbon nanotubes (O-CNT), oxidized-annealed carbon nanotubes (OA-CNT), carbon black (CB), and reduced graphene oxide (rGO). The carbon nanomaterials were dispersed in an isopropyl alcohol-Nafion solution and were then used to dip-coat a Ti substrate. Pseudomonas fluorescens was selected as the representative bacterium for environmental biofouling. Experiments in the absence of an electric potential indicate that increased nanoscale surface roughness and decreased hydrophobicity of the CNM coating decreased bacterial adhesion. The loss of bacterial viability on the noncharged CNM coatings ranged from 22% for CB to 67% for OA-CNT and was dependent on the CNM dimensions and surface chemistry. For electrochemical experiments, the total density and percentage of inactivation of the adherent bacteria were analyzed semiquantitatively as functions of electrode potential, current density, and hydrogen peroxide generation. Electrode potential and hydrogen peroxide generation were the dominant factors with regard to short-term (3-h) bacterial attachment and inactivation, respectively. Extended-time electrochemical experiments (12 h) indicated that in all cases, the density of total deposited bacteria increased almost linearly with time and that the rate of bacterial adhesion was decreased 8- to 10-fold when an electric potential was applied. In summary, this study provides a fundamental rationale for the selection of CNM as cathode coatings and electric potential to reduce microbial fouling.

| S-EPMC4551198 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data